Steffen Hau
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Steffen Hau has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Stefan Seelecke
Departments of Systems Engineering and Materials Science and Engineering, Saarland University, Saarbrücken, Germany
7 shared publications Alexander York
Department of Systems Engineering and the Department of Material Science and Engineering, Universität des Saarlandes, Saarbrücken, Germany
4 shared publications- Gianluca Rizzello
Department of Systems Engineering, Saarland University, Saarbrcken, Germany
4 shared publications - Alexander York
Parker Hannifin Corporation, Diversified Technology Business Unit, 8145 Lewis Road, Minneapolis, MN 55427
1 shared publication Daniel Bruch
Center for Mechatronics and Automation Technologies (ZeMA) gGmbH, Saarbrücken, GERMANY
1 shared publicationMicah Hodgins
Department of Systems Engineering and the Department of Material Science and Engineering, Universität des Saarlandes, Saarbrücken, Germany
1 shared publication
Latest Publications
- 7 September 2018
- Published by Wiley in Journal of Mechanical Design
- Vol. 140 (11)
Performance Prediction and Scaling Laws of Circular Dielectric Elastomer Membrane Actuators
For a number of emerging mechatronics applications, dielectric elastomers (DEs) appear as a more energy efficient, lightweight, and low-cost solution with respect to established actuation technologies based, e.g., on solenoids or pneumatic cylinders. In addition to large strain, low power consumption, and high flexibility, DE actuators (DEA) are also highly scalable. Since DE membranes can be easily manufactured in different sizes and shapes, an effective approach to scale their performance is based on properly designing the material geometry. Clearly, to perform an optimal scaling the relation between material geometry and performance has to be properly investigated. In this paper, performance scaling by means of geometry is studied for circular out-of-plane (COP) DEAs. Such actuators consist of a silicone elastomer membrane sandwiched between two electrodes (carbon black silicone mixture). DEAs with six different geometries are manufactured, and a model-based strategy is used to find an experimental relationship between geometry and electro-mechanical behavior. In addition, an effective and computationally efficient method for predicting force–displacement characteristics of different geometries is presented. The proposed method allows to easily adapt DEAs to different applications in terms of stroke and force requirement, while minimizing at the same time both characterization and prototyping effort.
- 7 September 2018
- Published by Wiley in Journal of Mechanical Design
- Vol. 140 (11)
Performance Prediction and Scaling Laws of Circular Dielectric Elastomer Membrane Actuators
For a number of emerging mechatronics applications, dielectric elastomers (DEs) appear as a more energy efficient, lightweight, and low-cost solution with respect to established actuation technologies based, e.g., on solenoids or pneumatic cylinders. In addition to large strain, low power consumption, and high flexibility, DE actuators (DEA) are also highly scalable. Since DE membranes can be easily manufactured in different sizes and shapes, an effective approach to scale their performance is based on properly designing the material geometry. Clearly, to perform an optimal scaling the relation between material geometry and performance has to be properly investigated. In this paper, performance scaling by means of geometry is studied for circular out-of-plane (COP) DEAs. Such actuators consist of a silicone elastomer membrane sandwiched between two electrodes (carbon black silicone mixture). DEAs with six different geometries are manufactured, and a model-based strategy is used to find an experimental relationship between geometry and electro-mechanical behavior. In addition, an effective and computationally efficient method for predicting force–displacement characteristics of different geometries is presented. The proposed method allows to easily adapt DEAs to different applications in terms of stroke and force requirement, while minimizing at the same time both characterization and prototyping effort.
- 1 September 2018
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 23, 24-28
A novel dielectric elastomer membrane actuator concept for high-force applications
- 1 September 2018
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 23, 24-28
A novel dielectric elastomer membrane actuator concept for high-force applications
- 5 June 2018
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 27 (7) , 074003
Silicone based dielectric elastomer strip actuators coupled with nonlinear biasing elements for large actuation strains
There are two major categories of dielectric elastomer actuators (DEAs), which differ from the way in which the actuation is exploited: stack DEAs, using the thickness compression, and membrane DEAs, which exploit the expansion in area. In this work we focus on a specific type of membrane DEAs, i.e., silicone-based strip-in-plane (SIP) DEAs with screen printed electrodes. The performance of such actuators strongly depends on their geometry and on the adopted mechanical biasing system. Typically, the biasing is based on elastomer pre-stretch or on dead loads, which results in relatively low actuation strain. Biasing systems characterized by a negative rate spring have proven to significantly increase the performance of circular out-of-plane DEAs. However, this kind of biasing has never been systematically applied to silicone SIP DEAs. In this work, the biasing design based on negative rate springs is extended to strip DEAs as well, allowing to improve speed, strain, and force of the resulting actuator. At first, the DEAs are characterized under electrical and mechanical loading. Afterwards, two actuator systems are studied and compared in terms of actuation strain, force output, and actuation speed. In a first design stage, the DEA is coupled with a linear spring. Subsequently, the membrane is loaded with a combination of linear and nonlinear spring (working in a negative stiffness region). The resulting stroke output of the second systems is more than 9 times higher in comparison to the first one. An actuation strain of up to 45% (11.2 millimeter) and a force output of 0.38 Newton are measured. A maximum speed of 0.29 m s −1 is achieved, which is about 60 times faster than the one typically measured for similar systems based on VHB.
- 5 June 2018
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 27 (7) , 074003
Silicone based dielectric elastomer strip actuators coupled with nonlinear biasing elements for large actuation strains
There are two major categories of dielectric elastomer actuators (DEAs), which differ from the way in which the actuation is exploited: stack DEAs, using the thickness compression, and membrane DEAs, which exploit the expansion in area. In this work we focus on a specific type of membrane DEAs, i.e., silicone-based strip-in-plane (SIP) DEAs with screen printed electrodes. The performance of such actuators strongly depends on their geometry and on the adopted mechanical biasing system. Typically, the biasing is based on elastomer pre-stretch or on dead loads, which results in relatively low actuation strain. Biasing systems characterized by a negative rate spring have proven to significantly increase the performance of circular out-of-plane DEAs. However, this kind of biasing has never been systematically applied to silicone SIP DEAs. In this work, the biasing design based on negative rate springs is extended to strip DEAs as well, allowing to improve speed, strain, and force of the resulting actuator. At first, the DEAs are characterized under electrical and mechanical loading. Afterwards, two actuator systems are studied and compared in terms of actuation strain, force output, and actuation speed. In a first design stage, the DEA is coupled with a linear spring. Subsequently, the membrane is loaded with a combination of linear and nonlinear spring (working in a negative stiffness region). The resulting stroke output of the second systems is more than 9 times higher in comparison to the first one. An actuation strain of up to 45% (11.2 millimeter) and a force output of 0.38 Newton are measured. A maximum speed of 0.29 m s −1 is achieved, which is about 60 times faster than the one typically measured for similar systems based on VHB.
- 13 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 22 (3) , 1259-1267
Design and Control of a High-Speed Positioning System Based on Dielectric Elastomer Membrane Actuators
Dielectric elastomers (DEs) represent a new family of electromechanical transducers capable of undergoing large actuation stroke (>100%), allowing it to achieve performance that is not attainable with standard transduction technologies (e.g., piezo). Furthermore, DEs' high flexibility permits us to design actuators with various shapes and sizes, allowing us to meet desired stroke or force specifications in a wide range of applications. This work aims to show the potential of DE technology in micropositioning applications by presenting development, manufacturing, and control of a one-directional flexure system driven by two circular out-of-plane DE actuators (COP-DEAs). The two COP-DEAs are coupled in an antagonistic configuration that, under the application of a voltage, provides push-pull forces on a custom built compliant unidirectional stage. After describing design and fabrication of the actuator, experimental characterization is performed. Finally, a feedforward control strategy is implemented in order to let the displacement follow a desired periodic profile. The unloaded stage is capable of accurately following sinusoidal and triangular trajectories, having a fundamental frequency of 60 Hz and a peak value of 40 μm, with a maximum error of 2 and 5 μm, respectively.
- 13 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 22 (3) , 1259-1267
Design and Control of a High-Speed Positioning System Based on Dielectric Elastomer Membrane Actuators
Dielectric elastomers (DEs) represent a new family of electromechanical transducers capable of undergoing large actuation stroke (>100%), allowing it to achieve performance that is not attainable with standard transduction technologies (e.g., piezo). Furthermore, DEs' high flexibility permits us to design actuators with various shapes and sizes, allowing us to meet desired stroke or force specifications in a wide range of applications. This work aims to show the potential of DE technology in micropositioning applications by presenting development, manufacturing, and control of a one-directional flexure system driven by two circular out-of-plane DE actuators (COP-DEAs). The two COP-DEAs are coupled in an antagonistic configuration that, under the application of a voltage, provides push-pull forces on a custom built compliant unidirectional stage. After describing design and fabrication of the actuator, experimental characterization is performed. Finally, a feedforward control strategy is implemented in order to let the displacement follow a desired periodic profile. The unloaded stage is capable of accurately following sinusoidal and triangular trajectories, having a fundamental frequency of 60 Hz and a peak value of 40 μm, with a maximum error of 2 and 5 μm, respectively.
- 15 April 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9798, 97980I-97980I-7
High-Force Dielectric Electroactive Polymer (DEAP) membrane actuator
- 15 April 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9798, 97980I-97980I-7
High-Force Dielectric Electroactive Polymer (DEAP) membrane actuator
- 1 April 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9430, 94300C
Performance prediction of circular dielectric electro-active polymers membrane actuators with various geometries
Circular dielectric electro-active polymer (DEAP) membrane actuators are easy to manufacture and therefore can be uniquely designed to perform optimally for specific applications. The performance of these actuators is naturally dependent on the materials used, and also dictated by the specific geometry of the circular design. For a given overall actuator size, changing their internal geometry will directly change the force and stroke output. In addition the DEAP technology itself is a promising technology for constructing lightweight, cost and energy efficient sensor and actuator systems. Thus, several potential applications like pressure sensors, pumps, valves, micro-positioners and loudspeakers were already proposed. The circular DEAP membrane actuators used in this study consist of a silicone based elastomer, carbon ink based electrodes, and are held together with a stiff frame. Experimentally collected force-displacement curves for these actuators can be used to determine force and stroke output of the actuators as described by Hodgins et al. in. This work presents an efficient method to predict these force-displacement plots and thus stroke and force output for different actuator geometries. These results than can be used to adapt the actuator geometry to the needs of a specific application with its particular force and stroke requirements. The prediction method is based on an average stress-stretch calculation for training samples. The calculated stress-stretch data is then geometry independent and can be used to predict desired geometry dependent force-displacement data for stroke and force output analysis.
- 1 April 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9430, 94300C
Performance prediction of circular dielectric electro-active polymers membrane actuators with various geometries
Circular dielectric electro-active polymer (DEAP) membrane actuators are easy to manufacture and therefore can be uniquely designed to perform optimally for specific applications. The performance of these actuators is naturally dependent on the materials used, and also dictated by the specific geometry of the circular design. For a given overall actuator size, changing their internal geometry will directly change the force and stroke output. In addition the DEAP technology itself is a promising technology for constructing lightweight, cost and energy efficient sensor and actuator systems. Thus, several potential applications like pressure sensors, pumps, valves, micro-positioners and loudspeakers were already proposed. The circular DEAP membrane actuators used in this study consist of a silicone based elastomer, carbon ink based electrodes, and are held together with a stiff frame. Experimentally collected force-displacement curves for these actuators can be used to determine force and stroke output of the actuators as described by Hodgins et al. in. This work presents an efficient method to predict these force-displacement plots and thus stroke and force output for different actuator geometries. These results than can be used to adapt the actuator geometry to the needs of a specific application with its particular force and stroke requirements. The prediction method is based on an average stress-stretch calculation for training samples. The calculated stress-stretch data is then geometry independent and can be used to predict desired geometry dependent force-displacement data for stroke and force output analysis.
- 8 September 2014
- Published by ASME International
Rapid Prototyping and Characterization of Circular Dielectric Electro-Active Polymers (DEAP) With Different Geometries
Dielectric electro-active polymer (DEAP) technology holds promise enabling lightweight, energy efficient and scalable sensors and actuators [1]. The circular DEAP configuration (also known as cone or diaphragm actuator) in particular shows potential in applications such as pressure or weight sensors [2, 3], pumps [4, 5], valves, micro-positioners and loudspeakers [6]. The geometric parameters of the circular DEAP dictate the stroke and work output performance of actuators and the sensitivity as well as the resolution of sensors. The scalable geometric design allows DEAP actuators and sensors to be adapted to a variety of different applications. This paper presents a rapid prototyping technique and experimental characterization of DEAP actuators with various geometries. The DEAP’s consist of a silicone based elastomer and a carbon ink based electrode held together with a rigid frame. The rapid prototyping utilizes high resolution 3D printing technology to manufacture various shaped framing structures designed with computer aided design (CAD) software. The framing structure defines the DEAP geometry resulting in quick prototyping of various DEAP shapes and sizes. After prototyping, these DEAP’s are tested for mechanical and electrical properties while loaded mechanically and electrically (constant voltage and constant force test). The measurement results for the different size actuators are then documented and compared. The measurements reveal that for increased size of the manufactured actuators, there is a linear increase in force and stroke output. This information allows us to predict the actuation performance and will be used for future modeling efforts.
- 8 September 2014
- Published by ASME International
Rapid Prototyping and Characterization of Circular Dielectric Electro-Active Polymers (DEAP) With Different Geometries
Dielectric electro-active polymer (DEAP) technology holds promise enabling lightweight, energy efficient and scalable sensors and actuators [1]. The circular DEAP configuration (also known as cone or diaphragm actuator) in particular shows potential in applications such as pressure or weight sensors [2, 3], pumps [4, 5], valves, micro-positioners and loudspeakers [6]. The geometric parameters of the circular DEAP dictate the stroke and work output performance of actuators and the sensitivity as well as the resolution of sensors. The scalable geometric design allows DEAP actuators and sensors to be adapted to a variety of different applications. This paper presents a rapid prototyping technique and experimental characterization of DEAP actuators with various geometries. The DEAP’s consist of a silicone based elastomer and a carbon ink based electrode held together with a rigid frame. The rapid prototyping utilizes high resolution 3D printing technology to manufacture various shaped framing structures designed with computer aided design (CAD) software. The framing structure defines the DEAP geometry resulting in quick prototyping of various DEAP shapes and sizes. After prototyping, these DEAP’s are tested for mechanical and electrical properties while loaded mechanically and electrically (constant voltage and constant force test). The measurement results for the different size actuators are then documented and compared. The measurements reveal that for increased size of the manufactured actuators, there is a linear increase in force and stroke output. This information allows us to predict the actuation performance and will be used for future modeling efforts.