Martin Letz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Martin Letz has a total of 246 co-authors. Here are the top co-authors by number of shared publications:
Lutz Parthier
Schott AG, Advanced Optics, Hattenbergstr. 10, 55122 Mainz, Germany
7 shared publicationsUte Natura
Hellma Materials GmbH & Co. KG 3 , Moritz-von-Laue-Str. 1, 07745 Jena, Germany
7 shared publications- Arnulf Latz
German Aerospace Center
6 shared publications - Gerhard Jakob
Institute of Physics, Johannes Gutenberg-University Mainz, Mainz, Germany
6 shared publications - Alexander Gottwald
Physikalisch-Technische Bundesanstalt (PTB)
5 shared publications L. Parthier
5 shared publications
Latest Publications
- 15 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Glasses as Substrates for Packaging: Remarks on Mechanic Reliability of Square Cut-Outs
Glasses are widely considered as substrates for advanced packaging, chiplet integration and heterogeneous integration. Applications range from high performance computing, automotive applications, radar packages to telecommunication in 5G/6G antenna in package concepts. The reason to use glass is manifold: Geometric rigidity, stiffness, smooth surfaces, superior dielectric properties, adjustable thermal expansion and the availability in wafer and large panel formats play an important role to consider glass as a substrate material in packaging. However, glasses are brittle materials and the mechanic stability of a brittle material is dominated by the defect statistics on its surfaces in combination with regions of tensile stresses. Structuring glasses with cut-outs and through glass vias (TGV's) creates a large amount of additional surface. Such structuring process involves laser based processes with additional etching steps. Additional surface defects can occur in any handling step during further processing, also dicing processes are of particular concern, since they create new surfaces with a particular level of additional surface defects. Stresses are introduced due to thermal processes e.g. curing processes or reflow soldering processes during manufacturing, but they can also occur due to thermal loads in final operation of the finished components. In the present work the mechanic stability of such structured glasses with rectangular cut-outs is investigated. A special focus is put on the quality of the structured geometries and how this influences the mechanic reliability of a structured glass. In particular, we show a direct comparison between finite element calculations of stress distributions and experimentally derived failure statistics of rectangular cut-outs with different curve radii in the corners. From this design rules can are derived to obtain mechanically stable, structured glass substrates as a core for advanced packaging and heterogeneous integration.
- 15 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Glasses as Substrates for Packaging: Remarks on Mechanic Reliability of Square Cut-Outs
Glasses are widely considered as substrates for advanced packaging, chiplet integration and heterogeneous integration. Applications range from high performance computing, automotive applications, radar packages to telecommunication in 5G/6G antenna in package concepts. The reason to use glass is manifold: Geometric rigidity, stiffness, smooth surfaces, superior dielectric properties, adjustable thermal expansion and the availability in wafer and large panel formats play an important role to consider glass as a substrate material in packaging. However, glasses are brittle materials and the mechanic stability of a brittle material is dominated by the defect statistics on its surfaces in combination with regions of tensile stresses. Structuring glasses with cut-outs and through glass vias (TGV's) creates a large amount of additional surface. Such structuring process involves laser based processes with additional etching steps. Additional surface defects can occur in any handling step during further processing, also dicing processes are of particular concern, since they create new surfaces with a particular level of additional surface defects. Stresses are introduced due to thermal processes e.g. curing processes or reflow soldering processes during manufacturing, but they can also occur due to thermal loads in final operation of the finished components. In the present work the mechanic stability of such structured glasses with rectangular cut-outs is investigated. A special focus is put on the quality of the structured geometries and how this influences the mechanic reliability of a structured glass. In particular, we show a direct comparison between finite element calculations of stress distributions and experimentally derived failure statistics of rectangular cut-outs with different curve radii in the corners. From this design rules can are derived to obtain mechanically stable, structured glass substrates as a core for advanced packaging and heterogeneous integration.
- 14 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Ba-Si Glass Scintillation Material Heavily Loaded with Gd for High Energy Physics Applications
Further progress in the development of scintillating materials for ionizing radiation detectors is one of the key challenges in the planning and construction of future high-luminosity accelerator experiments. Proper choice of the working material for the detectors is a mandatory step to ensure functionality and durability of the detection equipment in a harsh radiation environment. Nowadays, inorganic scintillators exhibit an attractive combination of features: high density, high scintillation yield, fast scintillation response, and high radiation tolerance to electromagnetic as well as hadronic components. Scintillating glasses based on barium di-silicate BaO-2SiO2 (DSB) promise to become a new material suitable for operation even in harsh radiation environment. This glass is produced from an inexpensive initial charge and allows manufacturing in large quantities by standard technology highly developed in glass industry. Its light yield is lower compared to most of the scintillators but exceeds the value of PbWO4, which is nowadays the most commonly used scintillating material in HEP experiments. After an appropriate tempering process, the transparent glass ceramics contains nano-sized particles of BaSi2O5 enhancing the scintillation properties of the material. First progress in the optimization of the technology was achieved in the frame of the ATTRACT project for glasses heavily loaded with Gd. In this paper we report on recent test results of samples produced in close cooperation with the glass manufacturer Schott (Mainz, Germany).
- 14 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Ba-Si Glass Scintillation Material Heavily Loaded with Gd for High Energy Physics Applications
Further progress in the development of scintillating materials for ionizing radiation detectors is one of the key challenges in the planning and construction of future high-luminosity accelerator experiments. Proper choice of the working material for the detectors is a mandatory step to ensure functionality and durability of the detection equipment in a harsh radiation environment. Nowadays, inorganic scintillators exhibit an attractive combination of features: high density, high scintillation yield, fast scintillation response, and high radiation tolerance to electromagnetic as well as hadronic components. Scintillating glasses based on barium di-silicate BaO-2SiO2 (DSB) promise to become a new material suitable for operation even in harsh radiation environment. This glass is produced from an inexpensive initial charge and allows manufacturing in large quantities by standard technology highly developed in glass industry. Its light yield is lower compared to most of the scintillators but exceeds the value of PbWO4, which is nowadays the most commonly used scintillating material in HEP experiments. After an appropriate tempering process, the transparent glass ceramics contains nano-sized particles of BaSi2O5 enhancing the scintillation properties of the material. First progress in the optimization of the technology was achieved in the frame of the ATTRACT project for glasses heavily loaded with Gd. In this paper we report on recent test results of samples produced in close cooperation with the glass manufacturer Schott (Mainz, Germany).
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (9) , 2792-2796
D-Band Corrugated Horn Antenna Using Multilayer Structured-Glass Technology
This work demonstrates the use of structured-glass waveguide (SGW) technology in a stackable multi-layer configuration in order to exhibit the versatile nature of structured-glass in high-frequency and high-performance applications. A novel multi-layer corrugated elliptic horn antenna composed of nine wafer layers is designed for operation in the D-band frequency range and exhibits the use of a circular waveguide feed line. In this manner, the structured-glass waveguide antenna design is introduced to the literature for the first time and demonstrated with the highest operating frequency to date for structured-glass based waveguide components. Detailed build profiles are provided with reference to the structured-glass fabrication method. Two of the proposed antenna components are fabricated in order to validate the gain measurement. The measured results are shown to achieve highly accurate S-parameter results and beam patterns throughout the selected frequency range.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (9) , 2792-2796
D-Band Corrugated Horn Antenna Using Multilayer Structured-Glass Technology
This work demonstrates the use of structured-glass waveguide (SGW) technology in a stackable multi-layer configuration in order to exhibit the versatile nature of structured-glass in high-frequency and high-performance applications. A novel multi-layer corrugated elliptic horn antenna composed of nine wafer layers is designed for operation in the D-band frequency range and exhibits the use of a circular waveguide feed line. In this manner, the structured-glass waveguide antenna design is introduced to the literature for the first time and demonstrated with the highest operating frequency to date for structured-glass based waveguide components. Detailed build profiles are provided with reference to the structured-glass fabrication method. Two of the proposed antenna components are fabricated in order to validate the gain measurement. The measured results are shown to achieve highly accurate S-parameter results and beam patterns throughout the selected frequency range.
- 5 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (9) , 1465-1473
Mechanical Characterization of Ultra-Thin, Flexible Glass Substrates for RF Applications
Glass has been shown to be a capable core substrate material for high-frequency applications. In this article, we examine the capabilities of ultra-thin glass as a material that can be used for high-frequency flexible applications. The two stack-ups discussed in the work presented are 60 $\mu \text{m}$ in total thickness with a core glass substrate (Schott AF32) of 30 $\mu \text{m}$ thickness. One stack-up uses 15 $\mu \text{m}$ JSR GT-N01 as a buildup dielectric on each side of the glass and the other uses 15 $\mu \text{m}$ Taiyo Ink photo imageable dielectric (PID). Both stack-ups have been characterized to 110 GHz and have shown to have comparable performance to materials used in this frequency range. This work then focuses on the mechanical characterization of these stack-ups using free arc bending. The free arc bending tests show that both ultra-thin glass stack-ups are suitable for bending applications as the tested samples can bend to a panel separation below 33% of the sample’s total length. This article concludes that the ultra-thin glass stack-ups are suitable for high-frequency flexible applications because the electrical performance is comparable to other high-frequency rigid materials while exhibiting their flexible capabilities.
- 5 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (9) , 1465-1473
Mechanical Characterization of Ultra-Thin, Flexible Glass Substrates for RF Applications
Glass has been shown to be a capable core substrate material for high-frequency applications. In this article, we examine the capabilities of ultra-thin glass as a material that can be used for high-frequency flexible applications. The two stack-ups discussed in the work presented are 60 $\mu \text{m}$ in total thickness with a core glass substrate (Schott AF32) of 30 $\mu \text{m}$ thickness. One stack-up uses 15 $\mu \text{m}$ JSR GT-N01 as a buildup dielectric on each side of the glass and the other uses 15 $\mu \text{m}$ Taiyo Ink photo imageable dielectric (PID). Both stack-ups have been characterized to 110 GHz and have shown to have comparable performance to materials used in this frequency range. This work then focuses on the mechanical characterization of these stack-ups using free arc bending. The free arc bending tests show that both ultra-thin glass stack-ups are suitable for bending applications as the tested samples can bend to a panel separation below 33% of the sample’s total length. This article concludes that the ultra-thin glass stack-ups are suitable for high-frequency flexible applications because the electrical performance is comparable to other high-frequency rigid materials while exhibiting their flexible capabilities.
- 1 October 2021
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in International Symposium on Microelectronics
- Vol. 2021 (1) , 000098-000102
Structured glass substrates in wafer- and panel level packaging: Status and recent achievements.
Glasses can be used as core substrate for panel- and/or wafer-level packaging to achieve heterogeneous integration of chiplets and integrated passives in increasingly complex packages. Glass has a large number of advantages: The stiffness of glass (i) allows manufacturing of highly accurate buildup layers. These buildup layers can have manufacturing precision of 1μm and below on large dies with sizes of 50mm x 50mm and more, needed for antenna in package (AiP) applications and high performance computing (HPC). Special glasses can be made with adjusted thermal expansion (CTE) (ii), either adjusted to silicon or with larger thermal expansion to allow packages with buildup layers of epoxy molds and metallization that see high thermal loads either during manufacturing or during operation. Glasses can also be optimized with very good dielectric properties (iii) and can be utilized in antenna-in-package applications. But most of all, economic glass structuring techniques (iv) which can provide millions of vias and thousands of cut-outs in a glass panel are important and are being developed. SCHOTTs Structured Glass Portfolio FLEXINITY® and related technologies provide an excellent starting point for highly sophisticated structured glass substrates required for Advanced Packaging. The biggest hurdle for a large-scale commercialization of glass panel packaging is industrial readiness along the whole process chain. This is needed, to bring glass panel packaging in applications like IC-packaging, RF-MEMS packaging and medical diagnostics or, in combination with cutouts for fan-out, embedding of active and passive components. In addition, metallization processes with good adhesion, excellent electrical properties and high geometric accuracy for glasses are an important step. In the current manuscript, we review the status and discuss our contribution towards achieving industrial readiness for glass in panel- and wafer-level packaging.
- 1 October 2021
- Published by IMAPS - International Microelectronics Assembly and Packaging Society in International Symposium on Microelectronics
- Vol. 2021 (1) , 000098-000102
Structured glass substrates in wafer- and panel level packaging: Status and recent achievements.
Glasses can be used as core substrate for panel- and/or wafer-level packaging to achieve heterogeneous integration of chiplets and integrated passives in increasingly complex packages. Glass has a large number of advantages: The stiffness of glass (i) allows manufacturing of highly accurate buildup layers. These buildup layers can have manufacturing precision of 1μm and below on large dies with sizes of 50mm x 50mm and more, needed for antenna in package (AiP) applications and high performance computing (HPC). Special glasses can be made with adjusted thermal expansion (CTE) (ii), either adjusted to silicon or with larger thermal expansion to allow packages with buildup layers of epoxy molds and metallization that see high thermal loads either during manufacturing or during operation. Glasses can also be optimized with very good dielectric properties (iii) and can be utilized in antenna-in-package applications. But most of all, economic glass structuring techniques (iv) which can provide millions of vias and thousands of cut-outs in a glass panel are important and are being developed. SCHOTTs Structured Glass Portfolio FLEXINITY® and related technologies provide an excellent starting point for highly sophisticated structured glass substrates required for Advanced Packaging. The biggest hurdle for a large-scale commercialization of glass panel packaging is industrial readiness along the whole process chain. This is needed, to bring glass panel packaging in applications like IC-packaging, RF-MEMS packaging and medical diagnostics or, in combination with cutouts for fan-out, embedding of active and passive components. In addition, metallization processes with good adhesion, excellent electrical properties and high geometric accuracy for glasses are an important step. In the current manuscript, we review the status and discuss our contribution towards achieving industrial readiness for glass in panel- and wafer-level packaging.
- Open Access
- 2 August 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (5) , 052903
Ba4Al2Ti10O27 based glass ceramic as dielectric in high frequency applications
Glass ceramics obtained via a true glassy phase are homogeneous and pore free, which makes them interesting for electronic applications, especially in the GHz frequency range. We discuss the glass-ceramic system with Ba4Al2Ti10O27 as the main crystalline phase and show material properties, including dielectric properties measured up to 110 GHz. Application examples are shown for filters and antennas in the GHz frequency range. The extremely high material homogeneity makes very precise manufacturing possible and enables MHz accuracy and reproducibility in GHz applications. The high linearity of the material properties is shown as well and makes high power applications, e.g., in cell phone base stations, possible. Also, applications in the MHz range are discussed.
- 2 August 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (5) , 052903
Open AccessBa4Al2Ti10O27 based glass ceramic as dielectric in high frequency applications
Glass ceramics obtained via a true glassy phase are homogeneous and pore free, which makes them interesting for electronic applications, especially in the GHz frequency range. We discuss the glass-ceramic system with Ba4Al2Ti10O27 as the main crystalline phase and show material properties, including dielectric properties measured up to 110 GHz. Application examples are shown for filters and antennas in the GHz frequency range. The extremely high material homogeneity makes very precise manufacturing possible and enables MHz accuracy and reproducibility in GHz applications. The high linearity of the material properties is shown as well and makes high power applications, e.g., in cell phone base stations, possible. Also, applications in the MHz range are discussed.
- Open Access
- 4 January 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (1) , 012902
Description of intermodulation generation of nonlinear responses beyond the validity of the power series expansion
Weakly nonlinear responses are commonly described by a power series expansion. However, intermodulation distortion products that cannot be described by a power series have been observed in a variety of physical systems. As the power series description is only applicable within its radius of convergence, we choose an alternative approach based on Fourier coefficients to describe intermodulation levels beyond the convergence of the power series. The description over a wide power range allows us to make a decision about models and to determine previously inaccessible model parameters. We apply the approach to data obtained from the characterization of the nonlinear dielectric susceptibility of a glass ceramic in the microwave range. The data are accurately modeled by a saturable absorber's response. We obtain the absorber's linear contribution to the polarization ( ) as well as its characteristic ratio of nonlinear and linear polarization ( ). Due to the small contribution of the saturable absorber to the overall polarization, the material shows a highly linear response ( ).- 4 January 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (1) , 012902
Open AccessDescription of intermodulation generation of nonlinear responses beyond the validity of the power series expansion
Weakly nonlinear responses are commonly described by a power series expansion. However, intermodulation distortion products that cannot be described by a power series have been observed in a variety of physical systems. As the power series description is only applicable within its radius of convergence, we choose an alternative approach based on Fourier coefficients to describe intermodulation levels beyond the convergence of the power series. The description over a wide power range allows us to make a decision about models and to determine previously inaccessible model parameters. We apply the approach to data obtained from the characterization of the nonlinear dielectric susceptibility of a glass ceramic in the microwave range. The data are accurately modeled by a saturable absorber's response. We obtain the absorber's linear contribution to the polarization ( ) as well as its characteristic ratio of nonlinear and linear polarization ( ). Due to the small contribution of the saturable absorber to the overall polarization, the material shows a highly linear response ( ). - 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 85-87
Glasses and Glass Ceramics for Applications in High Frequency Electronics
We report on the applicability of glasses and glass ceramics in the field of high frequency electronics. The main argument for applying such materials in high frequency electronics is their excellent homogeneity, which allows to make designs with kHz accuracy in the range of GHz frequencies. The range of dielectric properties which are covered by glasses and glass ceramics is outlined. Further on a number of examples are discussed were either glasses or glass ceramics are used with antenna functionalities or for high frequency filter applications.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 85-87
Glasses and Glass Ceramics for Applications in High Frequency Electronics
We report on the applicability of glasses and glass ceramics in the field of high frequency electronics. The main argument for applying such materials in high frequency electronics is their excellent homogeneity, which allows to make designs with kHz accuracy in the range of GHz frequencies. The range of dielectric properties which are covered by glasses and glass ceramics is outlined. Further on a number of examples are discussed were either glasses or glass ceramics are used with antenna functionalities or for high frequency filter applications.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 16-18
Setup for Characterization of the Non-Linear Electric Susceptibility in the Microwave Range Applied to a Glass Ceramic
A resonator method exciting eigenresonances of three coupled cylindrical dielectric resonators allows characterizing the non-linear response of low loss and high permittivity materials at frequencies of about 1 GHz. To reach the necessary sensitivity for dielectric non-linearities, the setup ensures that the measured intermodulation can be ascribed to the material under test while all other intermodulation sources are excluded. Electric field amplitudes of several V/mm are obtained at an input power of 100 W. The setup was used to characterize the third order non-linear susceptibility of a glass ceramic.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 16-18
Setup for Characterization of the Non-Linear Electric Susceptibility in the Microwave Range Applied to a Glass Ceramic
A resonator method exciting eigenresonances of three coupled cylindrical dielectric resonators allows characterizing the non-linear response of low loss and high permittivity materials at frequencies of about 1 GHz. To reach the necessary sensitivity for dielectric non-linearities, the setup ensures that the measured intermodulation can be ascribed to the material under test while all other intermodulation sources are excluded. Electric field amplitudes of several V/mm are obtained at an input power of 100 W. The setup was used to characterize the third order non-linear susceptibility of a glass ceramic.
- 27 May 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 114 (21) , 212903
High sensitivity characterization of the nonlinear electric susceptibility of a glass ceramic in the microwave range
The nonlinear electric susceptibility of a glass ceramic is characterized in the microwave range by measuring intermodulation of two high-power signals. To achieve the necessary sensitivity for dielectric nonlinearities, the setup ensures that the measured intermodulation can be ascribed to the material under test while all other intermodulation sources are suppressed. This is achieved by coupling three dielectric resonators in a cut-off waveguide. The third order nonlinearity of the glass ceramic is found to be χ3/εr = (1.6 ± 0.8) × 10−15 m2/V2 at 950 MHz. The magnitude is comparable to the previously measured high-end sintered ceramics. The power of the intermodulation signal as a function of the input power deviates from the simple 3 dB/dB scaling and can be modeled by linear-nonlinear interaction.
- 27 May 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 114 (21) , 212903
High sensitivity characterization of the nonlinear electric susceptibility of a glass ceramic in the microwave range
The nonlinear electric susceptibility of a glass ceramic is characterized in the microwave range by measuring intermodulation of two high-power signals. To achieve the necessary sensitivity for dielectric nonlinearities, the setup ensures that the measured intermodulation can be ascribed to the material under test while all other intermodulation sources are suppressed. This is achieved by coupling three dielectric resonators in a cut-off waveguide. The third order nonlinearity of the glass ceramic is found to be χ3/εr = (1.6 ± 0.8) × 10−15 m2/V2 at 950 MHz. The magnitude is comparable to the previously measured high-end sintered ceramics. The power of the intermodulation signal as a function of the input power deviates from the simple 3 dB/dB scaling and can be modeled by linear-nonlinear interaction.