BHBas Henzing

Bas Henzing

*This is an algorithmically generated author record based on publicly available information.

Bas Henzing has a total of 627 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Short- and long-term exposure to ambient PM2.5 and risk of cardiovascular disease hospitalisation: A nationwide cohort study in the Netherlands

    by Eugenio Traini, Youchen Shen, Tosca O.E. de Crom, Floris Pekel, Bas Henzing, Jessie J.X. Zhang, Andreas Pseftogkas, Calvin Ge, Renske Timmermans, Anjoeka Pronk

  • Open Access

    OPALE: Reducing Aerosol Optical Property Uncertainty of Elemental Carbon and Mineral Dust in LOTOS-EUROS Using a Perturbed Parameter Ensemble

    by Kaylee Elliott, Bas Henzing, Janot Tokaya, Nick Schutgens

    Aerosols are a key component of the atmosphere, influencing Earth’s climate through direct and indirect radiative effects, while also playing a major role in air quality and human health. Despite their importance, aerosols remain the largest source of uncertainty in estimates of climatic radiative forcing. This uncertainty arises from their complex chemical and physical properties, diverse sources, and strong spatio-temporal variability, all of which challenge accurate representation in atmospheric models. A crucial aspect of resolving model uncertainty of aerosols is the accurate representation of their microphysical properties, which control optical behavior and radiative effects. This study aims to address this uncertainty by applying a perturbed parameter ensemble (PPE) approach using the LOTOS-EUROS chemistry transport model. The analysis focuses on elemental carbon (EC) and mineral dust aerosols. Key microphysical parameters such as particle radius, geometric standard deviation (sigma) in the assumed lognormal particle size distribution, real and imaginary parts of the refractive index, and mass concentrations will be perturbed within physically plausible ranges. Uncertainty ranges for the refractive index are sourced from the Models, In situ, and Remote sensing of Aerosols (MIRA) international working group. Emulators trained on the ensemble simulations will provide a fast, statistical representation of modeled absorbing aerosol optical depth (AAOD), enabling efficient sampling of high-dimensional parameter space. Model results will be constrained using surface measurements of black carbon and mineral dust mass concentrations from EBAS, together with AAOD observations from AERONET. These combined constraints help reduce compensating bias between aerosol amount and optical efficiency. Overall, this framework will enable a quantitative assessment of uncertainty in modeled aerosol optical properties, identify the parameters that most strongly influence AAOD, and constrain the most realistic parameter ranges. These constraints will improve the representation of the varied aerosol microphysical properties in LOTOS-EUROS, leading to more accurate assumed aerosol optical properties. This is crucial for a useful uptake of remote sensing aerosol data in model evaluations and assimilation approaches.

  • Open Access

    Strengthening Kenya’s Climate and Health Vulnerability and Adaptation Assessment (CHVA) through Quantitative Heat and Air Pollution Modelling

    by Marya el Malki, Bob Ammerlaan, Floris Pekel, Eugenio Traini, Youchen Shen, Ioanna Skoulidou, Anthony Mwanti, Moses Chapa, Solomon Nzioka, Arthur Gohole, et al.

    Kenya faces increasing climate related health risks driven by rising temperatures, worsening air quality, and rapid socio environmental change. A quantitative Vulnerability and Adaptation Assessment is urgently needed to inform evidence based National Health Adaptation Plans and subsequent investment cases. This contribution presents a complementary role for applied research to strengthen Kenya’s Vulnerability and Adaptation Assessment, with a specific focus on heat stress and air pollution as two of the most climate sensitive health outcomes. Building on the World Health Organization Vulnerability and Adaptation assessment framework, we demonstrate how high-resolution quantitative exposure modelling can support all stages of the assessment process. Using integrated atmospheric and health impact models, we assess population exposure to heat stress and air pollution across past, present, and future climate conditions. Furthermore, the effect of mitigation measures, such as shifting work hours, is assessed. Heat stress is quantified using the wet bulb globe temperature framework, incorporating meteorological drivers such as temperature, humidity, wind, and solar radiation, as well as individual vulnerability factors including activity level and demographic characteristics. Air pollution exposure focuses on fine particulate matter, ozone, and nitrogen oxides, which represent the dominant air quality related health risks in Kenya. By accounting for co-exposure to heat stress and air pollution, the modelling framework captures compounded health risks and supports integrated climate, air quality, and public health policy assessment. A key added value of the modelling approach is source attribution, enabling air pollution exposure to be linked to both emission sector and geographic origin. This provides direct action perspectives for policy design and allows climate mitigation measures to be evaluated for their associated health co-benefits. Quantitative relationships between environmental exposures and health endpoints, including respiratory and non-communicable diseases, are applied in alignment with Global Burden of Disease methodologies. The contribution further outlines pathways for integrating satellite observations, sensor-based measurements, and sustained monitoring systems to support long term evaluation of adaptation measures. By embedding advanced quantitative methods within an existing national assessment framework, this work highlights how targeted international collaboration can enhance African leadership in climate health adaptation, strengthen decision relevant evidence, and support sustainable capacity development in line with global policy frameworks.

  • Open Access

    Two-year observations of aerosol size distributions: investigating new particle formation at coastal and rural sites in the Netherlands

    by Xinya Liu, Bas Henzing, Jan Mulder, Ulrike Dusek

    This study aims to analyze the dynamics of aerosol behavior, particularly focusing on particle number size distribution (PNSD) in contrasting environments — coastal and rural areas of the Netherlands. Our goal is to interpret the environmental factors and mechanisms influencing New Particle Formation (NPF) events in these distinct geographic settings, thereby enhancing our understanding of aerosol dynamics in varied environmental conditions. Our results indicate significant differences in particle number concentrations between the sites, with Cabauw showing notably higher concentrations, largely due to Ultrafine Particles (UFPs). Wind patterns strongly influence UFP levels, particularly winds from the direction of Amsterdam airport and the Rotterdam port area. However, the two sites exhibited good agreement (r²=0.62) in the concentration of accumulation mode particles, suggesting a regional rather than local source. Seasonal variations in nuclei mode particles were observed for both sites, with concentrations peaking in summer and diminishing in winter. Our analysis extends to PNSD clusters and NPF classes. The results suggest that NPF events are typically associated with high solar radiation, lower relative humidity, higher temperature, and higher SO2 and O3, but lower NOx. The growth of these newly formed particles often relies on stable diffusion radiation conditions, while frequent cloud occurrence impedes particle growth. Additionally, particle size growth is often accompanied by increased concentrations of organics, nitrate, and ammonium. Notably, two distinct NPF episodes in the morning and at noon were observed at Cabauw. Suppressed growth of morning particles often coincides with higher NOx concentrations. In contrast, Lutjewad often experienced noon NPF events, which demonstrated sustained growth in particle size until the following day. These findings underscore the influence of local environmental conditions on aerosol dynamics.

  • Open Access

    Atmospheric new particle formation identifier using longitudinal global particle number size distribution data

    by Simonas Kecorius, Leizel Madueño, Mario Lovric, Nikolina Racic, Maximilian Schwarz, Josef Cyrys, Juan Andrés Casquero-Vera, Lucas Alados-Arboledas, Sébastien Conil, Jean Sciare, et al.

    Atmospheric new particle formation (NPF) is a naturally occurring phenomenon, during which high concentrations of sub-10 nm particles are created through gas to particle conversion. The NPF is observed in multiple environments around the world. Although it has observable influence onto annual total and ultrafine particle number concentrations (PNC and UFP, respectively), only limited epidemiological studies have investigated whether these particles are associated with adverse health effects. One plausible reason for this limitation may be related to the absence of NPF identifiers available in UFP and PNC data sets. Until recently, the regional NPF events were usually identified manually from particle number size distribution contour plots. Identification of NPF across multi-annual and multiple station data sets remained a tedious task. In this work, we introduce a regional NPF identifier, created using an automated, machine learning based algorithm. The regional NPF event tag was created for 65 measurement sites globally, covering the period from 1996 to 2023. The discussed data set can be used in future studies related to regional NPF.


  • Open Access

    Aerosol optical properties within the atmospheric boundary layer predicted from ground-based observations compared to Raman lidar retrievals during RITA-2021

    by Xinya Liu, Diego Alves Gouveia, Bas Henzing, Arnoud Apituley, Arjan Hensen, Danielle van Dinther, Rujin Huang, Ulrike Dusek

    In this study, we utilised ground-based in situ measurements of the aerosol chemical composition and particle size distribution, along with meteorological data from the European Centre for Medium-Range Weather Forecasts (ECMWF), to predict vertical profiles of aerosol optical properties, including the aerosol scattering coefficient, backscatter coefficient, extinction coefficient, and lidar ratio. The predicted ambient profiles were compared to retrievals by a multi-wavelength Raman lidar during the Ruisdael Land–Atmosphere Interactions Intensive Trace-gas and Aerosol (RITA) campaign in the Netherlands in 2021 for 26 time periods of approximately 1 h each. Predicted and retrieved extensive aerosol properties (scattering, backscatter, and extinction coefficient) were comparable only approximately 35 % of the time, mostly under the condition of well-mixed boundary layers. In this case, ground-based measurements can provide a way to extend extinction profiles to lower altitudes, where they cannot be retrieved, and to verify the lidar-measured profiles. Accurate representation of hygroscopic growth is required for adjusting the dry size distribution to ambient size distribution, and the estimated relative humidity profile may have a substantial influence on the shape of the calculated profiles. On the other hand, the lidar ratio profiles predicted by ground-based data also compared reasonably well to the retrieved lidar profiles (starting at 800 m) for conditions where the predicted and retrieved backscatter profiles differed considerably. The difference in the predicted and retrieved lidar ratio is usually less than ±30 %. Our study thus shows that, for well-mixed boundary layers, a representative lidar ratio can be estimated from ground-based in situ measurements of chemical composition and dry size distribution. This approach offers a method of providing lidar ratios calculated from independent in situ measurements for simple backscatter lidars or at times when Raman lidar profiles cannot be measured (e.g. during the daytime). It only uses data that are routinely available at aerosol measurement stations and is therefore not only useful for further validating lidar measurements but also for bridging the gap between in situ measurements and lidar remote sensing.


  • Open Access

    Towards integration of LOTOS-EUROS high resolution simulations and heterogenous low-cost sensor observations

    by Ioanna Skoulidou, Arjo Segers, Bas Henzing, Jun Zhang, Ruben Goudriaan, Maria-Elissavet Koukouli, Dimitrios Balis


  • Open Access

    Reply on RC1

    by Xinya Liu, Diego Alves Gouveia, Bas Henzing, Arnoud Apituley, Arjan Hensen, Danielle van Dinther, Rujin Huang, Ulrike Dusek

    In this study, a Mie theory-based model was built to predict the vertical profile of the aerosol optical properties, including the aerosol scattering coefficient, backscatter coefficient, extinction coefficient, and lidar ratio. The model utilizes ground-based in-situ measurements of the aerosol chemical composition and particle size distribution, as well as the meteorological data from the Weather Forecasts (ECMWF) as input values. These are all parameters readily obtained for ACTRIS sites and the aim of this study was to investigate their suitability for generating representative estimates of the lidar ratio, and then further improve the lidar retrievals by utilizing these estimates. The measurements were performed during the Ruisdael land-atmosphere interactions Intensive Trace-gas and Aerosol (RITA) campaign in the Netherlands in 2021. The calculated dry aerosol optical properties were validated against a Nephelometer with good agreements (R2 ≈ 0.9). The predicted ambient vertical profiles of aerosol optical properties were compared to retrievals by a multi-wavelength Raman lidar. Predicted and retrieved backscatter coefficients were usually comparable under conditions of a well-mixed boundary layer. The extinction coefficients and lidar ratios were retrieved by the Raman lidar only at a height above 800 m. The estimated lidar ratio profiles based on in-situ data connected reasonably well to the lidar profiles within the boundary layer, with differences on average ± 30 %. Our study shows that for well-mixed boundary layers, a representative lidar ratio can be estimated based on ground-based in-situ measurements of dry size distribution and chemical composition taking into account the hygroscopic growth and ambient humidity. This allows to extend extinction profiles to lower altitudes, where they cannot be retrieved, or for use with simple elastic backscatter lidar to derive extinction profiles. The proposed method could be further applied to predict aerosol optical depth and also might be beneficial for large-scale or global radiation simulations.

  • Open Access

    Reply on RC2

    by Xinya Liu, Diego Alves Gouveia, Bas Henzing, Arnoud Apituley, Arjan Hensen, Danielle van Dinther, Rujin Huang, Ulrike Dusek

    In this study, a Mie theory-based model was built to predict the vertical profile of the aerosol optical properties, including the aerosol scattering coefficient, backscatter coefficient, extinction coefficient, and lidar ratio. The model utilizes ground-based in-situ measurements of the aerosol chemical composition and particle size distribution, as well as the meteorological data from the Weather Forecasts (ECMWF) as input values. These are all parameters readily obtained for ACTRIS sites and the aim of this study was to investigate their suitability for generating representative estimates of the lidar ratio, and then further improve the lidar retrievals by utilizing these estimates. The measurements were performed during the Ruisdael land-atmosphere interactions Intensive Trace-gas and Aerosol (RITA) campaign in the Netherlands in 2021. The calculated dry aerosol optical properties were validated against a Nephelometer with good agreements (R2 ≈ 0.9). The predicted ambient vertical profiles of aerosol optical properties were compared to retrievals by a multi-wavelength Raman lidar. Predicted and retrieved backscatter coefficients were usually comparable under conditions of a well-mixed boundary layer. The extinction coefficients and lidar ratios were retrieved by the Raman lidar only at a height above 800 m. The estimated lidar ratio profiles based on in-situ data connected reasonably well to the lidar profiles within the boundary layer, with differences on average ± 30 %. Our study shows that for well-mixed boundary layers, a representative lidar ratio can be estimated based on ground-based in-situ measurements of dry size distribution and chemical composition taking into account the hygroscopic growth and ambient humidity. This allows to extend extinction profiles to lower altitudes, where they cannot be retrieved, or for use with simple elastic backscatter lidar to derive extinction profiles. The proposed method could be further applied to predict aerosol optical depth and also might be beneficial for large-scale or global radiation simulations.

  • Open Access

    Measurement report: Evaluation of the TOF-ACSM-CV for PM1.0 and PM2.5 measurements during the RITA-2021 field campaign

    by Xinya Liu, Bas Henzing, Arjan Hensen, Jan Mulder, Peng Yao, Danielle van Dinther, Jerry van Bronckhorst, Rujin Huang, Ulrike Dusek

    The recently developed time-of-flight aerosol chemical speciation monitor with a capture vaporizer and a PM2.5 aerodynamic lens (TOF-ACSM-CV-PM2.5) aims to improve the collection efficiency and chemical characterization of aerosol particles with a diameter smaller than 2.5 µm. In this study, comprehensive cross-comparisons were performed between real-time online measurements and offline filter analysis with 24 h collection time. The goal was to evaluate the capabilities of the TOF-ACSM-CV-PM2.5 lens, as well as the accuracy of the TOF-ACSM-CV-PM2.5. The experiments were conducted at Cabauw Experimental Site for Atmospheric Research (CESAR) during the RITA-2021 campaign. The non-refractory fine particulate matter (PM1.0 and PM2.5) was measured by two collocated TOF-ACSM-CV-PM2.5 instruments by placing them behind a PM2.5 and PM1.0 inlet, respectively. A comparison between the ACSMs and PM2.5 and PM1.0 filter samples showed a much better accuracy than ±30 % less given in the previous reports, with average differences less than ±10 % for all inorganic chemical species. In addition, the ACSMs were compared to the Monitoring Instrument for Aerosol and Gas (MARGA) (slope between 0.78 and 0.97 for inorganic compounds, R2≥ 0.93) and a mobility particle size spectrometer (MPSS), measuring the particle size distribution from around 10 to 800 nm (slope was around 1.00, R2= 0.91). The intercomparison of the online measurements and the comparison between the online and offline measurements indicated a low bias (< 10 % for inorganic compounds) and demonstrated the high accuracy and stability of the TOF-ACSM-CV-PM2.5 lens for the atmospheric observations of particle matter. The two ACSMs exhibited an excellent agreement, with differences less than 7 %, which allowed a quantitative estimate of PM1.0 vs. PM2.5 chemical composition. The result showed that the PM1.0 accounted for about 70 %–80 % of the PM2.5 on average. The NO3 mass fraction increased, but the organic carbon (OC) mass fraction decreased from PM1.0 to PM2.5, indicating the size dependence on chemical composition.