Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Richard Diaz Alorro has a total of 120 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Repurposing of Novel Magnetic Adsorbent from Copper Converter Slag for the Recovery of Gold from Chloride Solution

    by Richard Diaz Alorro, Hajime Kijitani, Joel Hao Jorolan, Jonah Gamutan, Carlito Baltazar Tabelin, Mayumi Ito, Naoki Hiroyoshi

    Repurposing mineral processing waste offers both environmental and economic benefits, reducing the disposal burden while enabling mineral resource recovery. A magnetic adsorbent, with an Fe3O4 content of 71.0%, collected from waste copper converter slag was utilized to recover gold (Au3+) from chloride solution. The adsorbent was separated from the slag samples by crushing, grinding to an average particle size of 30 μm, and magnetic separation. Batch adsorption experiments were performed to evaluate the effects of pH, contact time, chloride concentration, and initial gold concentration on gold uptake amount. The material recovered over 99% of gold from chloride solution under acidic conditions and in the near-neutral pH range. The gold sorption rate was also relatively fast and over 98% recovery was achieved after just 15 min of contact time. Increasing chloride concentration did not influence gold uptake. Parameter studies and spectrometric analyses suggest that chalcocite (Cu2S) and metallic copper present in magnetite slag reduced the gold chloride complex to metallic gold. These results suggest that converter magnetite slag is a potentially effective sorbent to recover gold from secondary sources due to its selectivity and low cost. Moreover, gold-loaded magnetite slag can be easily separated from the solution by magnetic separation and then recirculated to the smelting stage of copper processing to recover the deposited gold and other precious metals. Overall, this work highlights a pathway to transform waste into opportunity, reinforcing sustainability in mineral processing operations.

  • Open Access

    Enhancing Lithium Extraction: Effect of Mechanical Activation on the Sulfuric Acid Leaching Behavior of Lepidolite

    by Yuik Eom, Laurence Dyer, Aleksandar N. Nikoloski, Richard Diaz Alorro

    This study investigated the effect of mechanical activation on the physicochemical properties of lepidolite and the leaching behavior of mechanically activated samples in sulfuric acid (H2SO4). Lepidolite was mechanically activated using a high-energy planetary ball mill (PBM) at 400 RPM with a 20:1 ball-to-feed weight ratio (BFR, g:g) and the samples activated for different durations were characterized for amorphous phase content, particle size, and morphology using various solid analyses. X-ray diffraction (XRD) revealed the progressive amorphization of lepidolite, with the amorphous fraction increased from 34.1% (unactivated) to 81.4% after 60 min of mechanical activation. Scanning electron microscopy (SEM) showed that mechanically activated particles became fluffy and rounded, whereas unactivated particles retained lamellar and angular shapes. The reactivity of minerals after mechanical activation was evaluated through a 2 M H2SO4 leaching test at different leaching temperatures (25–80 °C) and time periods (30–180 min). Although the leaching efficiencies of Li and Al slightly improved at higher leaching temperatures and longer leaching times, the leaching of these metals was primarily governed by the mechanical activation time. The highest Li and Al leaching efficiencies—87.0% for Li and 79.4% for Al—were obtained from lepidolite that was mechanically activated for 60 min under leaching conditions of 80 °C and a 10% (w/v) solid/liquid (S/L) ratio for 30 min. The elemental mapping images of leaching feed and residue produced via energy dispersive spectroscopy (EDS) indicated that unactivated particles in the leaching residue had much higher metal content than mechanically activated particles. Kinetic analysis further suggested that leaching predominantly occurs at mechanically activated sites and the apparent activation energies calculated in this study (−1) indicate diffusion-controlled behavior with weak temperature dependence. This result confirmed that mechanical activation significantly improves reactivity and that the residual unleached fraction can be attributed to unactivated particles.


  • Open Access

    Optimization of Mixed Mineral–Organic Acid Leaching for Critical Rare Earth Element Extraction from Philippine Coal Fly Ash

    by Mona Lisa C. Pacaña, Kathleen A. Ranay, Carlito B. Tabelin, Richard D. Alorro, Vannie Joy T. Resabal

    Coal fly ash (CFA) is a promising secondary resource for rare earth element (REE) recovery. This study characterized CFA using XRF, SEM-EDS, ICP-MS, and XRD, revealing critical REE concentrations of 26.3 ppm (Nd), 4.84 ppm (Dy), 2.89 ppm (Er), 1.69 ppm (Eu), and 0.85 ppm (Tb). REEs are distributed in Al-Si-Mg-Ca-rich aluminosilicates, except Dy, which is associated with Fe-rich phases. Leaching optimization using response surface methodology (RSM) with a central composite design (CCD) identified optimal conditions at 59.5% HCl:40.5% citric acid, 85 °C, and 720 min, achieving recoveries of 94.8% (Dy), 85.2% (Er), 73.1% (Eu), 79.1% (Nd), and 85.7% (Tb). These conditions provided the best balance between recovery, acid use, and selectivity, demonstrating potential scalability for industrial applications. The quadratic model accurately predicted REE recoveries, with accuracies of 95.61% (Dy), 97.76% (Er), 97.30% (Eu), 99.07% (Nd), and 99.17% (Tb). Thermodynamic analysis showed that mineral dissolution influenced REE selectivity, with anorthite (ΔG358K = −348.1 kJ·mol−1) dissolving readily, while ankerite (ΔG358K = 5.49 × 106 kJ·mol−1) contributed to high selectivity, particularly for Mg. Element selectivity followed Mg > Al > Si > Fe ≥ Ca, indicating Mg- and Al-bearing phases were more susceptible, while Fe- and Ca-bearing minerals remained more resistant under mixed-acid conditions.


  • Open Access

    Toward Expanding the Utilisation of Deep Eutectic Solvents: Rare Earth Recovery from Primary Ores and Process Tailings

    by K. Yamini, Laurence G. Dyer, Bogale Tadesse, Richard D. Alorro

    The increasing emphasis on green chemistry has led numerous researchers to focus on environmentally friendly solvents for mineral extraction. Among them, deep eutectic solvents (DESs) have garnered significant attention due to their eco-friendly, non-toxic, and biodegradable properties. These solvents possess comparable physicochemical properties to conventional ionic liquids but are more cost-effective and environmentally friendly. While DESs have been widely studied for extracting metals from synthetic minerals and end-of-life products, its use with primary ores and associated wastes remains relatively unexplored. This study aims to bridge that gap by assessing the effectiveness of choline chloride- and ethylene glycol-based DESs in extracting rare earth elements from primary feedstocks with varied grades and mineralogy, including sub-economic ores, monazite flotation tailings, and acid-crack and leach residue. The study also examines the practical challenges in preparing DES and assesses the applicability of the solvents for primary materials. By examining both solvent preparation challenges and the variable responses of different feed materials, this work provides a high-level scoping analysis to better understand the suitability and limitations of DES for primary resource extraction. This study highlights the challenges with physical properties and mineral breakdown in using DES.


  • Open Access

    Advances in Graphite Recycling from Spent Lithium-Ion Batteries: Towards Sustainable Resource Utilization

    by Maria Joriza Cañete Bondoc, Joel Hao Jorolan, Hyung-Sub Eom, Go-Gi Lee, Richard Diaz Alorro

    Graphite has been recognized as a critical material by the United States (US), the European Union (EU), and Australia. Owing to its unique structure and properties, it is utilized in many industries and has played a key role in the clean energy sector, particularly in the lithium-ion battery (LIB) industries. With the projected increase in global graphite demand, driven by the shift to clean energy and the use of EVs, as well as the geographically concentrated production and reserves of natural graphite, interest in graphite recycling has increased, with a specific focus on using spent LIBs and other waste carbon material. Although most established and developing LIB recycling technologies are focused on cathode materials, some have started recycling graphite, with promising results. Based on the different secondary sources and recycling paths reported, hydrometallurgy-based treatment is usually employed, especially for the purification of graphite; greener alternatives are being explored, replacing HF both in lab-scale research and in industry. This offers a viable solution to resource dependency and mitigates the environmental impact associated with graphite production. These developments signal a trend toward sustainable and circular pathways for graphite recycling.


  • Kinetics of metals dissolution from EV batteries for the development of sustainable technology

    by Rukshana Parween, Karina Rani, Rekha Panda, Kyoungkeun Yoo, Richard Diaz Alorro, Balram Ambade, Manis Kumar Jha


  • Open Access

    The Effects of Graphite on the Leaching Behaviors of Active Materials of Lithium-Ion Batteries During Sulfuric Acid Roasting

    by Heeyoung Choi, Intae Jo, Jeeyoung Park, Kyoungkeun Yoo, Richard Diaz Alorro

    This study investigated the detrimental effect of graphite on metal recovery during sulfuric acid roasting of lithium-ion battery materials. While sulfuric acid roasting of black mass achieved excellent leaching efficiencies (>99%) for nickel and cobalt at 250 °C, higher roasting temperatures significantly reduced their recovery to 84.9% and 93.1% at 400 °C, respectively. The key finding reveals that graphite accelerates sulfuric acid decomposition during roasting, consuming acid that would otherwise be available for metal sulfate formation. Weight-loss measurements confirmed this mechanism, showing increased acid decomposition with higher graphite content. Despite requiring three times the theoretical acid dosage (0.45 vs. 0.15 mole) for complete conversion, the process remained insufficient at elevated temperatures when graphite was present. These findings demonstrate that graphite interference is a critical factor limiting the efficiency of sulfuric acid roasting for lithium-ion battery recycling, necessitating lower roasting temperatures (around 250 °C) to maintain acceptable metal recovery efficiencies.


  • Open Access

    Synthesis of Iron-Based and Aluminum-Based Bimetals: A Systematic Review

    by Jeffrey Ken B. Balangao, Carlito Baltazar Tabelin, Theerayut Phengsaart, Joshua B. Zoleta, Takahiko Arima, Ilhwan Park, Walubita Mufalo, Mayumi Ito, Richard D. Alorro, Aileen H. Orbecido, et al.

    Bimetals—materials composed of two metal components with dissimilar standard reduction–oxidation (redox) potentials—offer unique electronic, optical, and catalytic properties, surpassing monometallic systems. These materials exhibit not only the combined attributes of their constituent metals but also new and novel properties arising from their synergy. Although many reviews have explored the synthesis, properties, and applications of bimetallic systems, none have focused exclusively on iron (Fe)- and aluminum (Al)-based bimetals. This systematic review addresses this gap by providing a comprehensive overview of conventional and emerging techniques for Fe-based and Al-based bimetal synthesis. Specifically, this work systematically reviewed recent studies from 2014 to 2023 using the Scopus, Web of Science (WoS), and Google Scholar databases, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and was registered under INPLASY with the registration number INPLASY202540026. Articles were excluded if they were inaccessible, non-English, review articles, conference papers, book chapters, or not directly related to the synthesis of Fe- or Al-based bimetals. Additionally, a bibliometric analysis was performed to evaluate the research trends on the synthesis of Fe-based and Al-based bimetals. Based on the 122 articles analyzed, Fe-based and Al-based bimetal synthesis methods were classified into three types: (i) physical, (ii) chemical, and (iii) biological techniques. Physical methods include mechanical alloying, radiolysis, sonochemical methods, the electrical explosion of metal wires, and magnetic field-assisted laser ablation in liquid (MF-LAL). In comparison, chemical protocols covered reduction, dealloying, supported particle methods, thermogravimetric methods, seed-mediated growth, galvanic replacement, and electrochemical synthesis. Meanwhile, biological techniques utilized plant extracts, chitosan, alginate, and cellulose-based materials as reducing agents and stabilizers during bimetal synthesis. Research works on the synthesis of Fe-based and Al-based bimetals initially declined but increased in 2018, followed by a stable trend, with 50% of the total studies conducted in the last five years. China led in the number of publications (62.3%), followed by Russia, Australia, and India, while Saudi Arabia had the highest number of citations per document (95). RSC Advances was the most active journal, publishing eight papers from 2014 to 2023, while Applied Catalysis B: Environmental had the highest number of citations per document at 203. Among the three synthesis methods, chemical techniques dominated, particularly supported particles, galvanic replacement, and chemical reduction, while biological and physical methods have started gaining interest. Iron–copper (Fe/Cu), iron–aluminum (Fe/Al), and iron–nickel (Fe/Ni) were the most commonly synthesized bimetals in the last 10 years. Finally, this work was funded by DOST-PCIEERD and DOST-ERDT.


  • Open Access

    Technospheric Mining of Cobalt and Nickel from Waste Nickel Furnace Slag by Ascorbic Acid-Assisted Citric Acid Leaching

    by K. Yamini, Laurence Dyer, Bona Lim, Richard Diaz Alorro

    With the growing demand for critical metals, extraction from secondary sources such as slag, tailings, and end-of-life materials has become inevitable. Processing from such secondary sources is described as technospheric mining. Technospheric mining is a broad term for extracting valuable resources from anthropogenic materials that are currently excluded from the material flow. The study utilises technospheric mining to extract cobalt and nickel from nickel furnace slag using organic acids such as ascorbic and citric acid. The experiments were designed using one variable at a time (OVAT) to optimise the different parameters: temperature, time, particle size, and reagent concentration. A maximum recovery of 79% Co and 80% Ni were obtained by leaching the nickel furnace slag using 0.5 mol/L citric acid and 0.5 mol/L ascorbic acid for 6 h at 80 °C. It is proposed that citric acid leaches the surface and ascorbic acid acts as a reducing agent, thereby reducing the slag matrix and leaching the metals trapped in it. The results show that treating nickel furnace slag via a mixture of organic acids is promising, as it is environmentally friendly. Retreating this material would reduce the net waste generated and aid in building a circular economy.