JVJothiram Vivekanandan

Jothiram Vivekanandan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jothiram Vivekanandan has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thank You to Our 2025 Reviewers

    by Kazuya Kobayashi, Kun‐Shan Chen, Sailing He, Sana Salous, Paul Smith, Jothiram Vivekanandan, Kumar Vijay Mishra

    Key Points: The editors thank the 2025 reviewers

  • Open Access

    Application of Airborne Phased Array Radar (APAR) Observing Simulation, Processing, and Research Environment (AOSPRE) In The NSF NCAR INtegrating Field Observations and Research Models (INFORM) Program

    by Wenchau Lee, Everette Joseph, Bradley Klotz, Jothiram Vivekanandan

    Development of a new observing system, such as the proposed Airborne Phased Array Radar (APAR) by the US National Science Foundation (NSF) National Center for Atmospheric Research (NCAR), is critical for the advancement of scientific understanding of weather phenomena. The APAR Observing Simulation, Processing, and Research Environment (AOSPRE) was developed to simulate APAR's measurement and science capabilities before the APAR is constructed. AOSPRE uses Cloud Model 1 (CM1) and Weather Research and Forecasting (WRF) model simulated storms with a hypothetical C-130 operated within the model space. Radar moments and dual-pol variables are deduced from the model microphysical parameters using the Cloud Resolving Model Radar Simulator (CR-SIM). Three-dimensional dual-Doppler radar winds can be retrieved from the Spline Analysis at Mesoscale Utilizing Radar and Aircraft Instrumentation (SAMURAI). The output can be examined directly or passed through additional tools to analyze various aspects of the data collected during each flight. AOSPRE is linked to a NSF NCAR-wide INtegrating Field Observations and Research Models (INFORM) to (1) establish and support best practices and methods for comparisons between models and observations, (2) exploit, assess and quantify the impacts of integrating observations and models to improve understanding of the prediction and predictability of the Earth system, and (3) improve the design, planning, deployment strategy of field programs and instrument development. The AOSPRE will be expanded into a field program planning tools as wells as a post campaign re-analysis tool with DA capability. AOSPRE is developed as an open-source software. The first version of AOSPRE software has been released to the research and operational community in the last quarter of 2024. Even though the APAR construction program was suspended by NSF in April 2025, AOSPRE capability has been expanded to be a general purposed radar simulating environment for the community that can be applied to other airborne and ground-based radars. This paper will provide recent development/accomplishment of AOSPRE and the applications of AOSPRE in the INFORM project to validate and improve model microphysics using radar observations.

  • Open Access

    Artificial Intelligence Weather Radar

    by Jothiram Vivekanandan, Gwo‐Jong Huang

    The integration of artificial intelligence (AI) with weather radar systems marks a transformative advancement in remote sensing. This study introduces an AI‐powered radar system that utilizes Long Short‐Term Memory (LSTM) neural networks to predict the in‐phase ( I ) and quadrature ( Q ) components of radar signals, enabling faster, and more accurate radar observations By synthesizing extended time series from a subset of real‐time measurements, the AI radar enhances measurement accuracy and spatial resolution without requiring longer dwell times. The proposed technique reduces data collection time and storage demands while maintaining the statistical and spectral characteristics of radar signals. Applied to both simulated and measured radar data, the AI radar demonstrates promising results in improving signal prediction and radar observations across ground‐based, airborne, and spaceborne platforms. This innovation paves the way for more efficient radar technologies, with potential applications in weather monitoring, military systems, and resource‐constrained environments.

  • Open Access

    Artificial Intelligence Weather Radar

    by Jothiram Vivekanandan, Gwo-Jong Huang

    • AI radar utilizes LSTM neural networks to predict radar I/Q signals, thereby enhancing the speed and accuracy of radar observations. • Existing radar with an LSTM network boosts spatial resolution and accuracy of measurements without increasing the data collection period. • The technique is applicable across ground, airborne, and spaceborne radar systems, with applications in a wide range of remote sensing.

  • Open Access

    The Airborne Phased Array Radar (APAR) Observing Simulation, Processing, and Research Environment (AOSPRE)

    by Wen-Chau Lee, Brad Klotz, Kevin Manning, Jothiram Vivekanandan

    The National Science Foundation (NSF) of the United States approved the Airborne Phased Array Radar (APAR) Mid-scale Research Infrastructure-2 proposal in 2023 to develop the next generation airborne polarimetric, Doppler weather radar mounted on the NSF/National Center for Atmospheric Research (NCAR) C-130 aircraft. Development of anew observing system is critical for the advancement of scientific understanding of weather phenomena. These instruments establish a proving ground for future operational transition while also providing tools for the research community. One of the issues with developing new instrumentation is the unknown performance characteristics of the instrument and the subsequent unknowns in uncertainty in measurements. The APAR Observing Simulation, Processing, and Research Environment (AOSPRE) was developed to simulate APAR's measurement capabilities for heavy precipitation and high-impact weather events. Using Cloud Model 1 (CM1) and Weather Research and Forecasting (WRF) model output to provide various storms of interest and their surrounding environments, simulated NCAR C-130 flights are operated within the model space. Radar moments and dual-Pol variables are determined using the Cloud Resolving Model Radar Simulator (CR-SIM). Three-dimensional dual-Doppler radar winds can be retrieved from the Spline Analysis at Mesoscale Utilizing Radar and Aircraft Instrumentation (SAMURAI). The output can be examined directly or passed through additional tools to analyze various aspects of the data collected during each flight. AOSPRE is linked to a NSF NCAR wide INtegrating Field Observations and Research Models (INFORM) to (1) establish and support best practices and methods for comparisons between models and observations, (2) exploit, assess and quantify the impacts of integrating observations and models to improve understanding of the prediction and predictability of the Earth system, and (3) improve the design, planning, deployment strategy of field programs and instrument development. The AOSPRE will be expanded into a field program planning tools as wells as a post campaign re-analysis tool with DA capability. AOSPRE is developed as an open-source software. The first version of AOSPRE software has been released to the research and operational community in the last quarter of 2024. This paper will provide an overview of the AOSPRE and report the recent development of the AOS to better simulate the characteristics of a phased array radar on a moving platform. In addition, the authors will outline how AOSPRE will be used as a component in the future APAR data analysis software system.

  • Open Access

    Evolution of Radar Meteorology in India and the latest trends

    by G. S. Bhat, J. Vivekanandan, D. Pradhan

    Weather radar is an indispensable tool in the continuous monitoring and warning of extreme events including tropical cyclones and thunderstorms. The India Meteorological Department (IMD) has been operating radars since 1949. The evolution of radar meteorology in India may be divided into three broad phases, namely, the 1950s (phase-I), then up to the year 2000 (phase-II), and thereafter (phase-III). During phase-I, radars were imported and installed in cities to aid aircraft operations. Photographs of radar scopes were analysed to provide a broad understanding of temporal evolution and spatial extent of precipitating clouds in different parts of the country and seasons. During phase-II, storm warning (X-band) and cyclone warning (S-band) radars with more power and range were installed, and some of them were indigenous. Phase-III ushered in the era of digital Doppler weather radars in India. Interfacing between numerical models and radars started in phase-III including assimilation of radar winds and model verification. Installation and operation of weather radars outside IMD also started in phase-III. Important areas where more work needs to be done include a well-trained workforce in radar meteorology, radar calibration and data standardization, radar area coverage and networking, algorithms for quantitative precipitation estimation using polarimetric products, assimilation of radar products in numerical models, research on cloud physics and dynamics, applications of AI/ML in storm and severe weather nowcasting.


  • Open Access

    Cloud and Precipitation Particle Identification Using Cloud Radar and Lidar Measurements: Retrieval Technique and Validation

    by Ulrike Romatschke, Jothiram Vivekanandan

    This paper describes a technique for identifying hydrometeor particle types using airborne HIAPER Cloud Radar (HCR) and High Spectral Resolution Lidar (HSRL) observations. HCR operates at a frequency of 94 GHz (3 mm wavelength), while HSRL is an eye-safe lidar system operating at a wavelength of 532 nm. Both instruments are deployed on the NSF-NCAR HIAPER aircraft. HCR is designed to fly in an underwing pod and HSRL is situated in the cabin. The HCR and HSRL data used in this study were collected during the Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES). Comprehensive observations of the vertical distributions of liquid and mixed-phase clouds were obtained using in-situ probes on the aircraft and remote sensing instruments. Hydrometeor particle types were retrieved from HCR, HSRL, and temperature fields with a newly-developed fuzzy logic particle identification (PID) algorithm. The PID results were validated with in-situ measurements collected onboard the HIAPER aircraft by a 2D-Stereo (2D-S) cloud probe. Particle phases derived from the PID results compare well with those obtained from the 2D-S observations and agree in over 70 % of cases. Size distributions are also consistent between the two methods of observation. Knowledge of the particle type distribution gained from the PID results can be used to constrain microphysical parameterizations and improve the representation of cloud radiative effects in weather and climate models.

  • Open Access

    Cloud and Precipitation Particle Identification Using Cloud Radar and Lidar Measurements: Retrieval Technique and Validation

    by Ulrike Romatschke, Jothiram Vivekanandan

    This paper describes a technique for identifying hydrometeor particle types using airborne HIAPER Cloud Radar (HCR) and High Spectral Resolution Lidar (HSRL) observations. HCR operates at a frequency of 94 GHz (3 mm wavelength), while HSRL is an eye-safe lidar system operating at a wavelength of 532 nm. Both instruments are deployed on the NSF-NCAR HIAPER aircraft. HCR is designed to fly in an underwing pod and HSRL is situated in the cabin. The HCR and HSRL data used in this study were collected during the Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES). Comprehensive observations of the vertical distributions of liquid and mixed-phase clouds were obtained using in-situ probes on the aircraft and remote sensing instruments. Hydrometeor particle types were retrieved from HCR, HSRL, and temperature fields with a newly-developed fuzzy logic particle identification (PID) algorithm. The PID results were validated with in-situ measurements collected onboard the HIAPER aircraft by a 2D-Stereo (2D-S) cloud probe. Particle phases derived from the PID results compare well with those obtained from the 2D-S observations and agree in over 70 % of cases. Size distributions are also consistent between the two methods of observation. Knowledge of the particle type distribution gained from the PID results can be used to constrain microphysical parameterization and improve the representation of cloud radiation effects in weather and climate models.

  • Open Access

    Overview of the Airborne Phased Array Radar Observing Simulator

    by Wen-Chau Lee, Jothiram Vivekanandan, Scott Ellis, Kevin Manning, George Bryan, Lou Lussier, Vanda Grubišić, Bradley Klotz

    The proposed airborne phased array radar (APAR) system consists of four removable, dual-polarized, C-band AESAs (Active Electronic Scanning Array) strategically located on the fuselage of the NSF/NCAR C-130. Conceptually, the radar system is divided into the front-end, the backend, and aircraft-specific section with the front-end primarily consisting of AESAs and the signal processor is in the backend. The aircraft specific section includes a power system and a GPS antenna.As part of the risk reduction of the APAR development, the APAR Observing Simulator (AOS) system has been developed to provide simulated APAR data collection sampled from a C-130 flying by/through realistic numerical weather simulations of high-impact weather events. Given that APAR is designed to extend beyond capabilities of the existing airborne tail Doppler radars (e.g., NOAA TDRs and the retired NSF/NCAR ELDORA), a verification of signal processing software and algorithms is needed before the radar is physically built to ensure that the signal processing software infrastructure can handle high data rates and complicated, multiplex scanning that will be part of normal APAR operations.  Furthermore, several algorithms that will need to ingest large amounts of APAR data at very high rates are under development, including dual-Doppler wind synthesis, radar reflectivity attenuation correction, rain rate estimation, and hydrometeor classification. These algorithms need to be tested and verified before the implementation. The AOS will also serve as a planning tool for future Principal Investigators (PIs) who will use it to design and test different flight and scanning strategies based on simulated storms to yield the best scientific outcomes before their field deployment takes place. This will enable better understanding of trade-offs among various sampling regimes/strategies during the planning and enhance future field programs' efficiency and effectiveness.

  • Open Access

    A Technique for Estimating Liquid Droplet Diameter and Liquid Water Content in Stratocumulus Clouds Using Radar and Lidar Measurements

    by Jothiram Vivekanandan, Virendra P. Ghate, Jorgen B. Jensen, Scott M. Ellis, M. Christian Schwartz

    This paper describes a technique for estimating the liquid water content (LWC) and a characteristic particle diameter in stratocumulus clouds using radar and lidar observations. The uncertainty in LWC estimate from radar and lidar measurements is significantly reduced once the characteristic particle diameter is known. The technique is independent of the drop size distribution. It is applicable for a broad range of W-band reflectivityZbetween −30 and 0 dBZand all values of lidar backscatterβobservations. No partitioning of cloud or drizzle is required on the basis of an arbitrary threshold ofZas in prior studies. A method for estimating droplet diameter and LWC was derived from the electromagnetic simulations of radar and lidar observations. In situ stratocumulus cloud and drizzle probe spectra were input to the electromagnetic simulation. The retrieved droplet diameter and LWC were validated using in situ measurements from the southeastern Pacific Ocean. The retrieval method was applied to radar and lidar measurements from the northeastern Pacific. Uncertainty in the retrieved droplet diameter and LWC that are due to the measurement errors in radar and lidar backscatter measurements are 7% and 14%, respectively. The retrieved LWC was validated using the concurrent G-band radiometer estimates of the liquid water path.