Sílvia Cardinal Pinho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sílvia Cardinal Pinho has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Manuel Almeida
LEPABE, Department of Mechanical Engineering, Faculty of Engineering, University of Porto, R. Dr. Roberto Frias, s/n, 4200-465 Porto, Portugal
12 shared publications - Olga Cristina Nunes
LEPABE‐Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering University of Porto Porto Portugal
4 shared publications - Carlos Fonseca
Universidade do Porto
3 shared publications - Maria Ascensão Lopes
University of Porto
3 shared publications - Alexandra Guedes
Earth Science Institute—Porto Pole, Department of Geosciences, Environment and Spatial Plannings, Faculty of Sciences, University of Porto, rua do Campo Alegre s/n, 4169-007 Porto, Portugal
2 shared publications - Aurora Futuro
LEPABE, Department of Metallurgical and Materials Engineering, Faculty of Engineering, University of Porto, 4169-007 Porto, Portugal
2 shared publications
Latest Publications
- Open Access
A Simple and Scalable Two-Step Process for Durable Hydrophobic and Stain-Resistant Leather Coatings
There is a strong and growing need for low environmental impact, fluorine-free finishes that deliver durable water repellency and stain resistance to leather while preserving its original appearance. This work successfully addresses this need by introducing a simple, robust, and scalable two-step coating strategy that endows leather surfaces with excellent hydrophobic and self-cleaning properties. The process relies on a straightforward spray application of functionalized silica nanoparticles followed by a hydrophobic silane, namely hexadecyltrimethoxysilane (HDTMS), enabling precise control over surface properties through the number of applied layers. Comprehensive characterization by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS) confirmed the effective formation and uniformity of the coating. Performance testing demonstrated excellent functional outcomes: the optimized coating achieved a water contact angle (WCA) of 128° and maintained values above 125° even after abrasion, highlighting its durability. Treated leather exhibited resistance to common liquid stains such as tea and coffee, maintaining a clean surface. These functional gains were achieved without compromising the leather’s natural look or soft feel, even after multiple coating cycles. This work delivers a fluorine-free solution offering an effective route to high-value water- and stain-resistant leather finishes that respect both environmental and aesthetic requirements.
Open AccessA Simple and Scalable Two-Step Process for Durable Hydrophobic and Stain-Resistant Leather Coatings
There is a strong and growing need for low environmental impact, fluorine-free finishes that deliver durable water repellency and stain resistance to leather while preserving its original appearance. This work successfully addresses this need by introducing a simple, robust, and scalable two-step coating strategy that endows leather surfaces with excellent hydrophobic and self-cleaning properties. The process relies on a straightforward spray application of functionalized silica nanoparticles followed by a hydrophobic silane, namely hexadecyltrimethoxysilane (HDTMS), enabling precise control over surface properties through the number of applied layers. Comprehensive characterization by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS) confirmed the effective formation and uniformity of the coating. Performance testing demonstrated excellent functional outcomes: the optimized coating achieved a water contact angle (WCA) of 128° and maintained values above 125° even after abrasion, highlighting its durability. Treated leather exhibited resistance to common liquid stains such as tea and coffee, maintaining a clean surface. These functional gains were achieved without compromising the leather’s natural look or soft feel, even after multiple coating cycles. This work delivers a fluorine-free solution offering an effective route to high-value water- and stain-resistant leather finishes that respect both environmental and aesthetic requirements.
- Open Access
- 20 March 2026
- Published by MDPI AG in Preprints.org
A Simple and Scalable Two-Step Process for Durable Hydrophobic and Stain Resistant Leather Coatings
There is a strong and growing need for low environmental impact, fluorine-free finishes that deliver durable water repellency and stain resistance to leather while preserving its original appearance. This work successfully addresses this need by introducing a simple, robust, and scalable two-step coating strategy that endows leather surfaces with excellent hydrophobic and self-cleaning properties. The process relies on a straightforward spray application of functionalized silica nanoparticles followed by a hydrophobic silane, namely hexadecyltrimethoxysilane (HDTMS), enabling precise control over surface properties through the number of applied layers. Comprehensive characterization by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS) confirmed the effective formation and uniformity of the coating. Performance testing demonstrated excellent functional outcomes: the optimized coating achieved a water contact angle of 128° and maintained values above 125° even after abrasion, highlighting its durability. Treated leather exhibited resistance to common liquid stains such as tea and coffee, maintaining a clean surface. These functional gains were achieved without compromising the leather’s natural look or soft feel, even after multiple coating cycles. This work delivers a fluorine-free solution offering an effective route to high-value water- and stain-resistant leather finishes that respect both environmental and aesthetic requirements.
- 20 March 2026
- Published by MDPI AG in Preprints.org
Open AccessA Simple and Scalable Two-Step Process for Durable Hydrophobic and Stain Resistant Leather Coatings
There is a strong and growing need for low environmental impact, fluorine-free finishes that deliver durable water repellency and stain resistance to leather while preserving its original appearance. This work successfully addresses this need by introducing a simple, robust, and scalable two-step coating strategy that endows leather surfaces with excellent hydrophobic and self-cleaning properties. The process relies on a straightforward spray application of functionalized silica nanoparticles followed by a hydrophobic silane, namely hexadecyltrimethoxysilane (HDTMS), enabling precise control over surface properties through the number of applied layers. Comprehensive characterization by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS) confirmed the effective formation and uniformity of the coating. Performance testing demonstrated excellent functional outcomes: the optimized coating achieved a water contact angle of 128° and maintained values above 125° even after abrasion, highlighting its durability. Treated leather exhibited resistance to common liquid stains such as tea and coffee, maintaining a clean surface. These functional gains were achieved without compromising the leather’s natural look or soft feel, even after multiple coating cycles. This work delivers a fluorine-free solution offering an effective route to high-value water- and stain-resistant leather finishes that respect both environmental and aesthetic requirements.
- Open Access
Effects of the Size and Loading of Chrome-Tanned Leather Shavings on the Properties of Styrene–Butadiene Rubber Compounds
Among the proposed leather recycling options, the incorporation of leather waste in rubber has been the subject of multiple studies, where the effects of leather content on the mechanical and rheological properties of the composites are usually studied. However, the effects of leather size have never been addressed in a systematic way. The reasons to study this parameter are twofold: it affects the physicochemical properties and processing conditions of the composites, and leather grinding is a costly and time-consuming process. In this work, leather waste (LW) with particle sizes ranging from ≤0.5 mm to ≤3 mm was incorporated in styrene–butadiene rubber (SBR) in contents of up to 50 phr. It was concluded that the composites with finer leather sizes exhibited a more uniform particles dispersion, and tensile strength was not significantly affected by the presence of LW, especially for the finer granulometries. However, there is a remarkable increase in the stiffness with the increase in leather content, particularly with the finer particles. The abrasion increased with the incorporation of leather across all particle sizes, especially for the ≤0.5 mm leather particles. The thermal stability of the composites was not affected by either the particle size or the amount of LW, except for high contents.
Open AccessEffects of the Size and Loading of Chrome-Tanned Leather Shavings on the Properties of Styrene–Butadiene Rubber Compounds
Among the proposed leather recycling options, the incorporation of leather waste in rubber has been the subject of multiple studies, where the effects of leather content on the mechanical and rheological properties of the composites are usually studied. However, the effects of leather size have never been addressed in a systematic way. The reasons to study this parameter are twofold: it affects the physicochemical properties and processing conditions of the composites, and leather grinding is a costly and time-consuming process. In this work, leather waste (LW) with particle sizes ranging from ≤0.5 mm to ≤3 mm was incorporated in styrene–butadiene rubber (SBR) in contents of up to 50 phr. It was concluded that the composites with finer leather sizes exhibited a more uniform particles dispersion, and tensile strength was not significantly affected by the presence of LW, especially for the finer granulometries. However, there is a remarkable increase in the stiffness with the increase in leather content, particularly with the finer particles. The abrasion increased with the incorporation of leather across all particle sizes, especially for the ≤0.5 mm leather particles. The thermal stability of the composites was not affected by either the particle size or the amount of LW, except for high contents.
- Open Access
- 13 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (18) , 8002
Systematic LCA-AHP Approach to Compare Hydrometallurgical Routes for Copper Recovery from Printed Circuit Boards: Environmental Analysis
To ensure that metal recovery processes in electronic waste are truly sustainable from an industrial perspective, studies on the performance of such methodologies are necessary to verify the economic, environmental, social, and technological viabilities. The importance of conducting multicriteria and comparative investigations into the actual performances of methods used in the recovery of these materials is emphasized, considering trade-offs such as high efficiency in metal extraction balanced against intense consumption of energy and chemical reagents. The analytical hierarchy process, multicriteria decision support tool, and the life cycle assessment tool are proposed to be used in combination in this work to assess and contrast the environmental effects of two hydrometallurgical paths for the recuperation of copper in electronic circuit boards (PCBs). The results indicate that the sulfuric acid method had a copper solubilization efficiency of 90.05%, whereas the route employing the combination of ammonium sulfate and ammonia had an estimated copper solubilization efficacy of 49%. It was feasible to calculate the life cycle effects of the hydrometallurgical procedures connected to the copper recovery activities on the PCBs with regard to the LCA. Compared to the acidic leaching pathway, alkaline leaching was responsible for about 71% of the environmental damage discovered in the study, according to the AHP tool.
- 13 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (18) , 8002
Open AccessSystematic LCA-AHP Approach to Compare Hydrometallurgical Routes for Copper Recovery from Printed Circuit Boards: Environmental Analysis
To ensure that metal recovery processes in electronic waste are truly sustainable from an industrial perspective, studies on the performance of such methodologies are necessary to verify the economic, environmental, social, and technological viabilities. The importance of conducting multicriteria and comparative investigations into the actual performances of methods used in the recovery of these materials is emphasized, considering trade-offs such as high efficiency in metal extraction balanced against intense consumption of energy and chemical reagents. The analytical hierarchy process, multicriteria decision support tool, and the life cycle assessment tool are proposed to be used in combination in this work to assess and contrast the environmental effects of two hydrometallurgical paths for the recuperation of copper in electronic circuit boards (PCBs). The results indicate that the sulfuric acid method had a copper solubilization efficiency of 90.05%, whereas the route employing the combination of ammonium sulfate and ammonia had an estimated copper solubilization efficacy of 49%. It was feasible to calculate the life cycle effects of the hydrometallurgical procedures connected to the copper recovery activities on the PCBs with regard to the LCA. Compared to the acidic leaching pathway, alkaline leaching was responsible for about 71% of the environmental damage discovered in the study, according to the AHP tool.
- 15 October 2022
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 14 (5) , 1683-1691
Copper Recovery from Printed Circuit Boards Using Ammonia–Ammonium Sulphate System: A Sustainable Approach
- 15 October 2022
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 14 (5) , 1683-1691
Copper Recovery from Printed Circuit Boards Using Ammonia–Ammonium Sulphate System: A Sustainable Approach
- 16 April 2021
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 23 (4) , 1456-1465
Copper, zinc, and nickel recovery from printed circuit boards using an ammonia–ammonium sulphate system
- 16 April 2021
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 23 (4) , 1456-1465
Copper, zinc, and nickel recovery from printed circuit boards using an ammonia–ammonium sulphate system
- 8 August 2019
- Published by Taylor & Francis
- p. 388-393
Physical separation applied to WPCB recycling process to optimize copper enrichment
The recycling of Waste Printed Circuit Boards (WPCBs) constituent materials has been of increasing relevance, especially when associated to the also increasing volume of WPCBs, caused by factors such as the technological advancement and the reduction of estimated useful life of products. The WPCBs recycling plants use physical processing operations such as dismantling, crushing, sieving, magnetic, gravity and density separation for the recovery of metals. The main objective of this work was the evaluation of the efficiency of the copper enrichment of fractions obtained in the physical recycling process of WPCBs. According to the results obtained in the present study, it is indicated the use of the process of physical separation in fractions with particle size +1 mm, aiming at the enrichment of metallic fractions, especially the nonmagnetic fraction, once the concentrate NM + 1 mm fraction, presented a concentration of 78% of copper in its composition.
- 8 August 2019
- Published by Taylor & Francis
- p. 388-393
Physical separation applied to WPCB recycling process to optimize copper enrichment
The recycling of Waste Printed Circuit Boards (WPCBs) constituent materials has been of increasing relevance, especially when associated to the also increasing volume of WPCBs, caused by factors such as the technological advancement and the reduction of estimated useful life of products. The WPCBs recycling plants use physical processing operations such as dismantling, crushing, sieving, magnetic, gravity and density separation for the recovery of metals. The main objective of this work was the evaluation of the efficiency of the copper enrichment of fractions obtained in the physical recycling process of WPCBs. According to the results obtained in the present study, it is indicated the use of the process of physical separation in fractions with particle size +1 mm, aiming at the enrichment of metallic fractions, especially the nonmagnetic fraction, once the concentrate NM + 1 mm fraction, presented a concentration of 78% of copper in its composition.
- 1 October 2018
- Published by Elsevier in Journal of Environmental Management
- Vol. 223, 297-305
Physical and thermal processing of Waste Printed Circuit Boards aiming for the recovery of gold and copper
- 1 October 2018
- Published by Elsevier in Journal of Environmental Management
- Vol. 223, 297-305
Physical and thermal processing of Waste Printed Circuit Boards aiming for the recovery of gold and copper
- 1 August 2018
- Published by Elsevier in Renewable Energy
- Vol. 124, 165-171
Enzymatic esterification of acid oil from soapstocks obtained in vegetable oil refining: Effect of enzyme concentration
- 1 August 2018
- Published by Elsevier in Renewable Energy
- Vol. 124, 165-171
Enzymatic esterification of acid oil from soapstocks obtained in vegetable oil refining: Effect of enzyme concentration
- 1 May 2018
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 132, 71-76
A wet dismantling process for the recycling of computer printed circuit boards
- 1 May 2018
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 132, 71-76
A wet dismantling process for the recycling of computer printed circuit boards