Qian Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qian Zhao has a total of 411 co-authors. Here are the top co-authors by number of shared publications:
- Tao Xie
State Key Laboratory of Chemical Engineering and Low-carbon Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China
69 shared publications Chujun Ni
Zhejiang University School of Medicine
21 shared publicationsJingjun Wu
Ningbo Innovation Center, Zhejiang University, Ningbo, China
19 shared publications- Ning Zheng
State Key Laboratory of Chemical Engineering and Low-carbon Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China
19 shared publications Qiyun Zhou
State Key Laboratory of Chemical Engineering, Department of Chemical and Biochemical Engineering , Zhejiang University , Hangzhou , China
19 shared publications- Jianzhong Sun
State Key Laboratory of Chemical Engineering, Department of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
16 shared publications
Latest Publications
- Open Access
- 7 September 2026
- Published by American Chemical Society (ACS) in Polymer Science & Technology
- Vol. 2 (10) , 814-823
Powder-to-Hydrogel System with Fast Water Absorption for Evaporative Cooling
Water-based evaporative cooling plays an important role in industrial thermal management. Porous hydrogels, which retain water within interconnected channels to serve as reservoirs for continuous evaporation, are promising materials for water-efficient cooling. However, compatibility between in situ formation and fast water absorption of the material as a coating remains a challenge. Here, we report a powder-to-hydrogel system enabling in situ formation of superhydrophilic porous hydrogel coating in a facile manner. An ionic polymer providing phenylboronic acid was introduced into a poly(vinyl alcohol) (PVA) and tannic acid (TA) powder system. Upon hydration, the powders rapidly converted into a hydrogel coating, where the ionic polymer was chemically anchored to the PVA-TA network via the formation of boronate ester bonds. This structural integration can drastically double the water uptake speeds and the overall water absorption capacity compared to pristine PVA-TA. Consequently, in a simulated solar panel cooling experiment with intermittent spraying, this coating successfully suppressed the temperature rise by over 48% compared to that of conventional strategies. Featuring large water capacity and rapid replenishment, this powder-based coating offers significant advantages for superior, long-lasting industrial cooling.
- 7 September 2026
- Published by American Chemical Society (ACS) in Polymer Science & Technology
- Vol. 2 (10) , 814-823
Open AccessPowder-to-Hydrogel System with Fast Water Absorption for Evaporative Cooling
Water-based evaporative cooling plays an important role in industrial thermal management. Porous hydrogels, which retain water within interconnected channels to serve as reservoirs for continuous evaporation, are promising materials for water-efficient cooling. However, compatibility between in situ formation and fast water absorption of the material as a coating remains a challenge. Here, we report a powder-to-hydrogel system enabling in situ formation of superhydrophilic porous hydrogel coating in a facile manner. An ionic polymer providing phenylboronic acid was introduced into a poly(vinyl alcohol) (PVA) and tannic acid (TA) powder system. Upon hydration, the powders rapidly converted into a hydrogel coating, where the ionic polymer was chemically anchored to the PVA-TA network via the formation of boronate ester bonds. This structural integration can drastically double the water uptake speeds and the overall water absorption capacity compared to pristine PVA-TA. Consequently, in a simulated solar panel cooling experiment with intermittent spraying, this coating successfully suppressed the temperature rise by over 48% compared to that of conventional strategies. Featuring large water capacity and rapid replenishment, this powder-based coating offers significant advantages for superior, long-lasting industrial cooling.
- Open Access
3D Printing of Bio‐Based Elastomers With High Toughness
The rapid development of 3D printing, combined with the urgent need to address fossil resource depletion and environmental pollution, has spurred strong interest in utilizing bio‐based feedstocks for additive manufacturing of polymers. Despite extensive efforts, a key bottleneck remains in how to achieve superior mechanical properties at a high bio‐content. Fundamentally, the difficulty lies in how to construct the appropriate aggregation states key to the mechanical properties under the constraints of bio‐based 3D printing. Here, we report our successful attempt in this direction. At a high bio‐content of 76%, our printed elastomer exhibits tensile strength (37.1 MPa) and toughness (156.9 MJ m −3 ) far exceeding any known 3D‐printed bio‐based elastomers and even commercial petroleum‐based elastomers. The material design is further extended to produce 3D foams with a tensile strength of 1.2 MPa at a low density of 0.26 g cm −3 . This ability to 3D print mechanically robust architectured foams opens up new structure design opportunities to maximize material utilization efficiency. Our findings underscore the potential for sustainable manufacturing of high‐performance 3D printing.
Open Access3D Printing of Bio‐Based Elastomers With High Toughness
The rapid development of 3D printing, combined with the urgent need to address fossil resource depletion and environmental pollution, has spurred strong interest in utilizing bio‐based feedstocks for additive manufacturing of polymers. Despite extensive efforts, a key bottleneck remains in how to achieve superior mechanical properties at a high bio‐content. Fundamentally, the difficulty lies in how to construct the appropriate aggregation states key to the mechanical properties under the constraints of bio‐based 3D printing. Here, we report our successful attempt in this direction. At a high bio‐content of 76%, our printed elastomer exhibits tensile strength (37.1 MPa) and toughness (156.9 MJ m −3 ) far exceeding any known 3D‐printed bio‐based elastomers and even commercial petroleum‐based elastomers. The material design is further extended to produce 3D foams with a tensile strength of 1.2 MPa at a low density of 0.26 g cm −3 . This ability to 3D print mechanically robust architectured foams opens up new structure design opportunities to maximize material utilization efficiency. Our findings underscore the potential for sustainable manufacturing of high‐performance 3D printing.
- 15 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (33) , 45627-45634
Post-Printing Manipulation of Material Mechanical Properties via Synergistic Engineering of Dynamic Polymer Network and Phase Separation
The coupling of 3D printing process constraints and material molecular design makes it difficult to simultaneously achieve sophisticated structural fidelity and desirable mechanical performance. Topological reconfiguration of dynamic covalent polymer networks imparts materials with the capability to modulate their properties as needed post fabrication. However, prior studies had only achieved a limited modulation range because material properties depend solely on the polymer network structure. Herein, we introduce phase separation into a 3D printable dynamic covalent polymer network to enable significant mechanical property modulation in geometrically complex 3D objects. Specifically, the printing resin precursor comprises a crosslinker functionalized with dynamic hindered urea bonds and non-photocurable polyethylene glycol monomethyl ether. A rigid construct is first obtained via photopolymerization-induced phase separation during printing. Subsequent activation of dynamic bond exchange reactions enables simultaneous tailoring of both the network topology and phase morphology, realizing broad-range mechanical tunability with a modulus spanning three orders of magnitude from 0.47 GPa to 0.5 MPa. This remarkable on-demand rigid-to-soft transition allows 100 μm printing resolution to be readily achieved, overcoming the limitations of 3D printing in fabricating soft functional materials with high structural fidelity.
- 15 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (33) , 45627-45634
Post-Printing Manipulation of Material Mechanical Properties via Synergistic Engineering of Dynamic Polymer Network and Phase Separation
The coupling of 3D printing process constraints and material molecular design makes it difficult to simultaneously achieve sophisticated structural fidelity and desirable mechanical performance. Topological reconfiguration of dynamic covalent polymer networks imparts materials with the capability to modulate their properties as needed post fabrication. However, prior studies had only achieved a limited modulation range because material properties depend solely on the polymer network structure. Herein, we introduce phase separation into a 3D printable dynamic covalent polymer network to enable significant mechanical property modulation in geometrically complex 3D objects. Specifically, the printing resin precursor comprises a crosslinker functionalized with dynamic hindered urea bonds and non-photocurable polyethylene glycol monomethyl ether. A rigid construct is first obtained via photopolymerization-induced phase separation during printing. Subsequent activation of dynamic bond exchange reactions enables simultaneous tailoring of both the network topology and phase morphology, realizing broad-range mechanical tunability with a modulus spanning three orders of magnitude from 0.47 GPa to 0.5 MPa. This remarkable on-demand rigid-to-soft transition allows 100 μm printing resolution to be readily achieved, overcoming the limitations of 3D printing in fabricating soft functional materials with high structural fidelity.
- Open Access
- 30 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (53) , e74397
Mechanically Programmable Electromagnetic Metamaterials for Generalized Phase Tailoring With Zero Static Power Consumption
Mechanically modulated reconfigurable electromagnetic metamaterials represent a promising avenue for flexible wavefront manipulation. However, most mechanically tunable designs rely on collective deformations and continuous external loading, leading to limited programmability and high static power consumption. Here, we present a mechanically programmable electromagnetic metamaterial enabled by 3D‐printed shape memory polymer (SMP) compression‐torsion coupling structures integrated with the three‐fold symmetric three‐armed meta‐atoms (C3 meta‐atoms) for generalized phase tailoring with zero static power consumption. The compression‐torsion coupling structures enable deterministic and independent in‐plane rotation of each unit cell under vertical compression, while the C3 meta‐atoms provide sixfold cross‐circularly polarized phase amplification, achieving full 0°–360° phase coverage with a narrow rotational angular range of 0°–60°. Leveraging the intrinsic shape‐locking and shape‐recovery properties of SMP, arbitrary phase distribution patterns are attainable via mechanical coding without sustained power consumption, and can be repeatedly erased and rewritten via thermal recovery. Numerical simulations and experimental characterizations reveal the design principle and operation mechanism of the metamaterial, verifying its programmable functionalities through demonstrations of anomalous refraction, reconfigurable metalens, and orbital‐angular‐momentum (OAM) generators. These findings provide a conceptual framework for low‐energy, programmable, and reconfigurable wavefront modulation, laying a foundation for advancing next‐generation mechanically programmable electromagnetic metamaterials.
- 30 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (53) , e74397
Open AccessMechanically Programmable Electromagnetic Metamaterials for Generalized Phase Tailoring With Zero Static Power Consumption
Mechanically modulated reconfigurable electromagnetic metamaterials represent a promising avenue for flexible wavefront manipulation. However, most mechanically tunable designs rely on collective deformations and continuous external loading, leading to limited programmability and high static power consumption. Here, we present a mechanically programmable electromagnetic metamaterial enabled by 3D‐printed shape memory polymer (SMP) compression‐torsion coupling structures integrated with the three‐fold symmetric three‐armed meta‐atoms (C3 meta‐atoms) for generalized phase tailoring with zero static power consumption. The compression‐torsion coupling structures enable deterministic and independent in‐plane rotation of each unit cell under vertical compression, while the C3 meta‐atoms provide sixfold cross‐circularly polarized phase amplification, achieving full 0°–360° phase coverage with a narrow rotational angular range of 0°–60°. Leveraging the intrinsic shape‐locking and shape‐recovery properties of SMP, arbitrary phase distribution patterns are attainable via mechanical coding without sustained power consumption, and can be repeatedly erased and rewritten via thermal recovery. Numerical simulations and experimental characterizations reveal the design principle and operation mechanism of the metamaterial, verifying its programmable functionalities through demonstrations of anomalous refraction, reconfigurable metalens, and orbital‐angular‐momentum (OAM) generators. These findings provide a conceptual framework for low‐energy, programmable, and reconfigurable wavefront modulation, laying a foundation for advancing next‐generation mechanically programmable electromagnetic metamaterials.
- Open Access
Microphase‐Separated Liquid Crystal Elastomer Actuators With Exceptional Strength and Toughness
Liquid crystal elastomers (LCEs) have emerged as attractive soft actuators capable of undergoing large and reversible actuation. Their potential for practical applications, however, has been fundamentally constrained by an intrinsic trade‐off: the chain flexibility required for reversible actuation inherently restricts molecular design toward achieving high mechanical strength and toughness. Here, we report a phase separation strategy that yields an LCE with a tensile strength of 92 MPa and toughness of 247 MJ m −3 . This leads to 20‐fold and 40‐fold improvements compared with conventional LCEs without sacrificing their reversible actuation. Mechanistically, this superior mechanical performance is enabled by the incorporation of rigid polyamide acid segments into the network. During network formation, these segments self‐assemble into phase‐separated nanostructures that function as in situ‐generated nanofillers, reinforcing the material and endowing it with outstanding work capacity. Our work suggests that leveraging microphase separation substantially broadens the design space for high‐performance LCE actuators, paving the way toward mechanically robust and efficient soft actuation systems.
Open AccessMicrophase‐Separated Liquid Crystal Elastomer Actuators With Exceptional Strength and Toughness
Liquid crystal elastomers (LCEs) have emerged as attractive soft actuators capable of undergoing large and reversible actuation. Their potential for practical applications, however, has been fundamentally constrained by an intrinsic trade‐off: the chain flexibility required for reversible actuation inherently restricts molecular design toward achieving high mechanical strength and toughness. Here, we report a phase separation strategy that yields an LCE with a tensile strength of 92 MPa and toughness of 247 MJ m −3 . This leads to 20‐fold and 40‐fold improvements compared with conventional LCEs without sacrificing their reversible actuation. Mechanistically, this superior mechanical performance is enabled by the incorporation of rigid polyamide acid segments into the network. During network formation, these segments self‐assemble into phase‐separated nanostructures that function as in situ‐generated nanofillers, reinforcing the material and endowing it with outstanding work capacity. Our work suggests that leveraging microphase separation substantially broadens the design space for high‐performance LCE actuators, paving the way toward mechanically robust and efficient soft actuation systems.
- 15 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Highly Dynamic Yet Stable Polyketimine Networks with Closed-Loop Recyclability and Topological Programmability.
Closed-loop recycling via depolymerization has emerged as a promising strategy to mitigate plastic pollution. Ideal recyclable polymer networks should feature highly dynamic bonds that depolymerize efficiently into monomers/oligomers. However, this intrinsic bond lability inevitably introduces a critical trade-off, as it typically undermines the material's stability. In this work, we design a polyketimine network that can be closed-loop recycled under mild conditions, without the need for consumable reagents or catalysts, while retaining robust mechanical properties during use. At the molecular level, hindered ketimine bonds remain sufficiently labile to depolymerize back to the designed oligomers, due to the steric hindrance from the ketone and amine reactants. At the network level, however, hydrophobic phases block water ingress, effectively "locking" the network and preserving mechanical performance even under harsh conditions (85 °C, 85% relative humidity, 48 h). When recycling is desired, a compatible organic solvent disrupts these hydrophobic phases, allowing water to penetrate the network and trigger depolymerization. Consequently, depolymerization and repolymerization cycles can be conducted using only easily recoverable water and solvents under mild conditions. By leveraging this dynamic chemistry, the synthesized polymers can be disassembled and reassembled into diverse network topologies, corresponding to a Young's modulus that spans 6 orders of magnitude. Our work demonstrates that intrinsically labile dynamic bonds can be harnessed to build stable materials with tunable properties, offering a versatile platform for next-generation closed-loop recyclable polymers.
- 15 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Highly Dynamic Yet Stable Polyketimine Networks with Closed-Loop Recyclability and Topological Programmability.
Closed-loop recycling via depolymerization has emerged as a promising strategy to mitigate plastic pollution. Ideal recyclable polymer networks should feature highly dynamic bonds that depolymerize efficiently into monomers/oligomers. However, this intrinsic bond lability inevitably introduces a critical trade-off, as it typically undermines the material's stability. In this work, we design a polyketimine network that can be closed-loop recycled under mild conditions, without the need for consumable reagents or catalysts, while retaining robust mechanical properties during use. At the molecular level, hindered ketimine bonds remain sufficiently labile to depolymerize back to the designed oligomers, due to the steric hindrance from the ketone and amine reactants. At the network level, however, hydrophobic phases block water ingress, effectively "locking" the network and preserving mechanical performance even under harsh conditions (85 °C, 85% relative humidity, 48 h). When recycling is desired, a compatible organic solvent disrupts these hydrophobic phases, allowing water to penetrate the network and trigger depolymerization. Consequently, depolymerization and repolymerization cycles can be conducted using only easily recoverable water and solvents under mild conditions. By leveraging this dynamic chemistry, the synthesized polymers can be disassembled and reassembled into diverse network topologies, corresponding to a Young's modulus that spans 6 orders of magnitude. Our work demonstrates that intrinsically labile dynamic bonds can be harnessed to build stable materials with tunable properties, offering a versatile platform for next-generation closed-loop recyclable polymers.
- 7 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (45) , e73919
Time‐Encoded Geometric Encryption Enabled by Shape‐Memory Hydrogel with Photoisomerization‐Gated Autonomous Recovery
Leveraging spatiotemporal shape‐changing of information‐bearing morphologies, materials with predetermined autonomous‐shape‐morphing potentially offer a unique form of time‐encoded geometric communication in contrast to existing optical encryption methods. However, fundamental mechanisms and control strategies underlying the spatiotemporal programmability remain insufficiently explored, thus the information capacity and security levels are still restricted. Here we report a non‐thermal and spatiotemporally controllable strategy to gate the morphing kinetics of shape‐memory hydrogel via photoisomerization. Upon functionalization of azobenzene moieties, multiple amide‐amide hydrogen bonds are incorporated into the poly(acrylamide) hydrogel. These hydrogen bonds, with strong time‐temperature dependence, act as stress‐damping units that decelerate the network's inherent elastic recovery, providing a mechanism for time‐encoded autonomous‐shape‐morphing. Photoisomerization of the pendant azobenzene moieties modulate the thermodynamic state of the hydrogen bonds, thus can control the morphing kinetics. Through orthogonal time and photo‐spatial programming of the dynamic interactions, the hydrogel can autonomously execute sophisticated shape transformations along predetermined pathways, thereby serving as a carrier for storing geometric information. This work demonstrates the feasibility of time‐encoded shape morphing and establishes an alternative strategy to conventional optics‐based encryption, providing enhanced data capacity and security through time‐dependent geometric encoding.
- 7 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (45) , e73919
Time‐Encoded Geometric Encryption Enabled by Shape‐Memory Hydrogel with Photoisomerization‐Gated Autonomous Recovery
Leveraging spatiotemporal shape‐changing of information‐bearing morphologies, materials with predetermined autonomous‐shape‐morphing potentially offer a unique form of time‐encoded geometric communication in contrast to existing optical encryption methods. However, fundamental mechanisms and control strategies underlying the spatiotemporal programmability remain insufficiently explored, thus the information capacity and security levels are still restricted. Here we report a non‐thermal and spatiotemporally controllable strategy to gate the morphing kinetics of shape‐memory hydrogel via photoisomerization. Upon functionalization of azobenzene moieties, multiple amide‐amide hydrogen bonds are incorporated into the poly(acrylamide) hydrogel. These hydrogen bonds, with strong time‐temperature dependence, act as stress‐damping units that decelerate the network's inherent elastic recovery, providing a mechanism for time‐encoded autonomous‐shape‐morphing. Photoisomerization of the pendant azobenzene moieties modulate the thermodynamic state of the hydrogen bonds, thus can control the morphing kinetics. Through orthogonal time and photo‐spatial programming of the dynamic interactions, the hydrogel can autonomously execute sophisticated shape transformations along predetermined pathways, thereby serving as a carrier for storing geometric information. This work demonstrates the feasibility of time‐encoded shape morphing and establishes an alternative strategy to conventional optics‐based encryption, providing enhanced data capacity and security through time‐dependent geometric encoding.
- Open Access
- 27 February 2026
- Published by American Chemical Society (ACS) in Precision Chemistry
- Vol. 4 (5) , 534-546
Dynamic Covalent Chemistry: A Boon for Closed-Loop Recycling of Polymer Networks
Since the advent of synthetic polymers in the early 20th century, polymer research has mainly focused on the synthesis of polymers. Looking forward to the next century, growing environmental and resource concerns are shifting the focus of polymer science toward sustainable management, with closed-loop recycling emerging as an ideal pathway. Nevertheless, chemically cross-linked thermosetting polymer networks remain particularly challenging to recycle in a closed-loop manner. Dynamic covalent chemistry has recently shown promise as a viable strategy, though the field is still in its early stages. In this review, we examine the inherent obstacles to the closed-loop recycling of polymer networks, trace the development of dynamic covalent chemistry, and provide an overview of reversible chemical systems suitable for network closed-loop recycling. Based on these insights, we highlight current challenges and provide forward-looking perspectives on how further advances in dynamic covalent chemistry can drive sustainable development in polymer materials, contributing to the growth of this emerging area.
- 27 February 2026
- Published by American Chemical Society (ACS) in Precision Chemistry
- Vol. 4 (5) , 534-546
Open AccessDynamic Covalent Chemistry: A Boon for Closed-Loop Recycling of Polymer Networks
Since the advent of synthetic polymers in the early 20th century, polymer research has mainly focused on the synthesis of polymers. Looking forward to the next century, growing environmental and resource concerns are shifting the focus of polymer science toward sustainable management, with closed-loop recycling emerging as an ideal pathway. Nevertheless, chemically cross-linked thermosetting polymer networks remain particularly challenging to recycle in a closed-loop manner. Dynamic covalent chemistry has recently shown promise as a viable strategy, though the field is still in its early stages. In this review, we examine the inherent obstacles to the closed-loop recycling of polymer networks, trace the development of dynamic covalent chemistry, and provide an overview of reversible chemical systems suitable for network closed-loop recycling. Based on these insights, we highlight current challenges and provide forward-looking perspectives on how further advances in dynamic covalent chemistry can drive sustainable development in polymer materials, contributing to the growth of this emerging area.
- Open Access
- 9 January 2026
- Published by Springer Nature in Cell Research
- Vol. 36 (4) , 272-285
Transient mechanical activation of the Piezo1 channel facilitates ex vivo expansion of hematopoietic stem cells
Achieving long-term ex vivo expansion of functional hematopoietic stem cells (HSCs) is essential for advancing HSC-based clinical therapies. Although mechanosensitive ion channels are known to play key roles in the hematopoietic system, their involvement in HSC expansion remains unclear. Here, we show that Piezo1 is highly expressed in HSCs. Both genetic deletion and prolonged chemical activation of Piezo1 impair cultured HSC function, indicating that transient mechanical activation of Piezo1 is required for maintenance of HSCs in culture. To achieve this, we screened various microspheres and found that PS500 (500-nm polystyrene microspheres) significantly enhanced ex vivo expansion of mouse bone marrow HSCs with long-term repopulating capacity. PS500 also expanded human umbilical cord blood HSCs capable of engraftment in immunodeficient mice. Mechanistically, PS500 activates Piezo1, triggering Ca 2+ -dependent expression of proliferative cytokines and subsequent STAT3 activation, which support HSC self-renewal and proliferation. Together, these findings show that PS500 enables transient Piezo1 activation and efficient, non-toxic expansion of functional HSCs, offering a promising approach for the generation of transplantable HSCs for clinical use.
- 9 January 2026
- Published by Springer Nature in Cell Research
- Vol. 36 (4) , 272-285
Open AccessTransient mechanical activation of the Piezo1 channel facilitates ex vivo expansion of hematopoietic stem cells
Achieving long-term ex vivo expansion of functional hematopoietic stem cells (HSCs) is essential for advancing HSC-based clinical therapies. Although mechanosensitive ion channels are known to play key roles in the hematopoietic system, their involvement in HSC expansion remains unclear. Here, we show that Piezo1 is highly expressed in HSCs. Both genetic deletion and prolonged chemical activation of Piezo1 impair cultured HSC function, indicating that transient mechanical activation of Piezo1 is required for maintenance of HSCs in culture. To achieve this, we screened various microspheres and found that PS500 (500-nm polystyrene microspheres) significantly enhanced ex vivo expansion of mouse bone marrow HSCs with long-term repopulating capacity. PS500 also expanded human umbilical cord blood HSCs capable of engraftment in immunodeficient mice. Mechanistically, PS500 activates Piezo1, triggering Ca 2+ -dependent expression of proliferative cytokines and subsequent STAT3 activation, which support HSC self-renewal and proliferation. Together, these findings show that PS500 enables transient Piezo1 activation and efficient, non-toxic expansion of functional HSCs, offering a promising approach for the generation of transplantable HSCs for clinical use.
- Open Access
- 13 December 2025
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
4D printing of trigger-free shape-memory hydrogels towards self-adaptive substrates for bioelectronics
Shape-changing smart substrates are revolutionizing implantable bioelectronics by offering minimal invasiveness and self-adaptive geometric conformity. However, precise manipulation of shapeshifting, which is critical for the successful implantation, are hindered by triggering accessibility and cumbersome customization. Here we introduce a digital 4D printing technique for fabricating customized shape memory hydrogel substrates enabling trigger-free shapeshifting with predefined onset periods. By controlling spatio-temporal light exposure, pixelated polymer sheets with heterogeneous networks are obtained, yielding intricate 3D original shapes after monomer removal. Meanwhile, spatially controlled onset time of the programmable shape recovery is introduced, attributed to local variation of polymeric network structure and the corresponding thermally-induced phase separation. This approach allows the complex 3D objects to execute autonomous multi-stage shape recovery through a single-step digital exposure process, which is not offered by existing techniques. In addition, the material exhibits negligible inflammation proven by in-vivo testing of male mice experiments. Demonstrated with self-winding bioelectronics, this method advances time-dependent adaptability of implantable devices and expands the functional scope of bioelectronics.
- 13 December 2025
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open Access4D printing of trigger-free shape-memory hydrogels towards self-adaptive substrates for bioelectronics
Shape-changing smart substrates are revolutionizing implantable bioelectronics by offering minimal invasiveness and self-adaptive geometric conformity. However, precise manipulation of shapeshifting, which is critical for the successful implantation, are hindered by triggering accessibility and cumbersome customization. Here we introduce a digital 4D printing technique for fabricating customized shape memory hydrogel substrates enabling trigger-free shapeshifting with predefined onset periods. By controlling spatio-temporal light exposure, pixelated polymer sheets with heterogeneous networks are obtained, yielding intricate 3D original shapes after monomer removal. Meanwhile, spatially controlled onset time of the programmable shape recovery is introduced, attributed to local variation of polymeric network structure and the corresponding thermally-induced phase separation. This approach allows the complex 3D objects to execute autonomous multi-stage shape recovery through a single-step digital exposure process, which is not offered by existing techniques. In addition, the material exhibits negligible inflammation proven by in-vivo testing of male mice experiments. Demonstrated with self-winding bioelectronics, this method advances time-dependent adaptability of implantable devices and expands the functional scope of bioelectronics.