JJJosemon Jacob

Josemon Jacob

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Josemon Jacob has a total of 222 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Flame‐Retarded Poly(Urethane‐Imide) Films Prepared via a Processable Intermediate Route With Enhanced Thermal Stability

    by Mahipal Meena, Raju Yadav, Prasun Kumar Roy, Josemon Jacob

    Poly(urethane‐imide)s (PUIs) combine the flexibility of polyurethanes with the thermal stability of polyimides; however, their inherent flammability and limited processability restrict wider application in fire‐safety‐critical environments. In this work, these limitations were addressed by integrating a reactive phosphorus‐containing polyol into the polymer backbone together with a processable intermediate strategy enabling film fabrication prior to imidization. An isocyanate‐terminated prepolymer derived from methylene diphenyl diisocyanate (MDI) and a phosphorus‐containing polyol (OP‐550) was reacted with pyromellitic dianhydride (PMDA) under mild conditions to form a soluble intermediate. The intermediate allowed solution casting of uniform films, which were subsequently converted into poly(urethane‐imide) structures through thermal imidization. FTIR spectroscopy confirmed formation of urethane and imide linkages. Thermogravimetric analysis revealed multi‐step degradation behavior, with increasing PMDA content promoting enhanced char formation and improved thermal stability. All compositions achieved UL‐94 VTM‐0 classification, exhibiting rapid self‐extinguishing behavior and suppression of melt dripping. SEM analysis of the residual char showed a cellular char morphology indicative of condensed‐phase flame‐retardant action. Mechanical testing demonstrated increased rigidity with higher imide incorporation, highlighting a balance between thermal stability and flexibility. The proposed strategy provides an effective route for producing thermally stable, self‐extinguishing PUI films for applications requiring enhanced flame resistance.

  • Flame‐Retardant Waterproof Breathable Polyurethane Thin Films via Green Synthesis for Textile Applications

    by Mahipal Meena, Prasun Kumar Roy, Josemon Jacob

    The demand for flame‐retardant, waterproof, and breathable textiles is increasing, but achieving fire resistance in polyurethane (PU) films without compromising mechanical properties and sustainability remains challenging. Conventional PU coatings often rely on toxic solvents and non‐biodegradable flame retardants, raising safety concerns. This study develops hydrophilic, flame‐retardant PU films using 1,3‐dioxolane, a greener alternative to dimethylformamide (DMF). Two series of PU films were synthesized via condensation of polyethylene glycol (PEG 1500) and methylene diphenyl diisocyanate (MDI) with and without a crosslinker. A ternary flame‐retardant (FR) formulation of ammonium polyphosphate (APP), aluminum trihydrate (ATH), and pyromellitic dianhydride (PMDA) was incorporated to enhance flame resistance. The films were evaluated for morphology, thermal stability, flame retardancy, mechanical strength, water sorption, breathability, and waterproofness. Non‐crosslinked films achieved a VTM‐0 rating but exhibited melt drips, necessitating crosslinking for improved performance. FR additives reduced the initial degradation temperature while increasing char yield. FTIR analysis indicated in situ polyimide formation by the reaction of PMDA with isocyanate released from the degradation of PU. By integrating a green solvent and an optimized FR formulation, this study presents an eco‐friendly approach to flame‐retardant breathable coatings, advancing sustainable protective textiles for fire‐resistant applications.


  • 1,4-Bis(2-hydroxyethyl)piperazine-derived water-dispersible and antibacterial polyurethane coatings for medical catheters

    by Anchal Gupta, Simran Kaur Rainu, Manleen Kaur, Mahipal Meena, Neetu Singh, Josemon Jacob

    To prolong usage and mitigate infections associated with bacterial colonization on medical catheters, the development of water-dispersible polyurethane (PU) coatings with bactericidal properties is desirable. With this objective, we have formulated polyurethane coatings that exhibit both antibacterial activity and water dispersibility. A piperazine-based diol, 1,4-bis(2-hydroxyethyl)piperazine (HEPZ), was synthesized and used as a chain extender in PU synthesis. The PUs were prepared using hexamethylene diisocyanate (HDI), 4,4′-methylene diphenyl diisocyanate (MDI), polyethylene glycol (PEG600), and polypropylene glycol (PPG400), resulting in a series of polyurethanes (PU1–PU4). MDI-containing PUs showed superior tensile strength (3.2–3.6 MPa) and elongation (67–70%) attributable to their higher aromatic content. The PEG600-containing PUs (PU1 and PU3) were alkylated using methyl iodide (MeI) to varying degrees whereby a significant reduction in contact angle from ∼82° to ∼62° was observed, indicating enhanced hydrophilicity. MPU3-D with 72.5% methylation demonstrated the most stable water dispersion with a particle size of ∼190.8 nm and a zeta potential of +49.0 mV. In vitro cytocompatibility studies further revealed that methylated PU3 exhibited higher compatibility (80–90%) compared to methylated PU1 (30–40%). The hemolysis test showed the non-hemolytic behavior of MPU3-D films with a % hemolysis of 0.4 ± (0.2)% making it suitable for coating on medical devices. Additionally, MPU3-D films also demonstrated antibacterial activity against Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria, with zones of inhibition measuring 7 mm and 8 mm, respectively. Also, water-dispersible MPU3-D-based coatings with a hardness of ∼75 A and a thickness of ∼17 μm (as observed through FESEM) showed strong adhesion to PVC catheters, exhibiting an adhesion strength of 4B rating. Our results suggest that water-dispersible polyurethane coatings with antibacterial properties are promising materials to reduce catheter-associated infections and enhance patient care.


  • Polyzwitterionic Nanogels for the Controlled and Sustained Delivery of NO and H2S

    by Ujjawal Bairagi, Simran Kaur Rainu, Neetu Singh, Josemon Jacob


  • 2,2’‐Bipyridine‐Derived Cobalt‐Based Porous Coordination Polymers for Selective Degradation of Anionic Dyes

    by Shivani Goyal, Josemon Jacob

    2,2’‐Bipyridine‐derived two chelating linkers containing two and three bipyridine units were synthesized and characterized. Solvothermal condensation of these linkers with Co(NO 3 ) 2 .6H 2 O generated cobalt‐based porous coordination polymers (Co‐PCPs). The scanning electron microscopy studies revealed the macroporous nature of the Co‐PCPs, with the highest surface area achieved up to 441.1 m 2 g −1 . The Co‐PCPs were found to be effective catalysts in the degradation of the anionic dyes, methyl orange (MO) and orange 2 (OII), in the presence of sodium borohydride. Also, the synthesized PCPs were found to selectively catalyse the degradation of anionic dyes from a mixture of dyes (~99 % degradation in 55 min). Regeneration studies showed that the PCPs could be regenerated and reused for more than five cycles with ~98 % retention of degradation efficiency and are promising materials for the selective degradation of anionic dyes from wastewater.


  • Anti‐drip flame retardant poly(urethane‐imide) thin films for high‐temperature applications

    by Mahipal Meena, Prasun Roy, Josemon Jacob

    The present work deals with developing anti‐drip, flame‐retardant, poly(urethane‐imide) copolymer films for potential use in specialized applications. PUI formulations containing varying amounts of different flame retardants were prepared to achieve UL‐94 VTM‐0 rating without any melt‐drip. Thermogravimetric analysis revealed that PUI exhibits multi‐step degradation. The presence of flame‐retardant additives operating through a condensed phase mechanism was found to reduce the initial degradation temperature and increase char yield. SEM imaging of the char residue revealed the intumescent behavior of PUI with APP and PEPA additives. Both these additives were found to be effective flame retardants for PUI films. The addition of 25% APP and 25% PEPA led to VTM‐0 and VTM‐1 ratings, respectively, without melt drip. DOPO, a representative vapor phase flame retardant, was also found to be effective for PUIs, with 25% DOPO introduction resulting in a VTM‐0 rating. Conventional phosphate‐based flame retardants, such as triethyl phosphate, tricresyl phosphate, and triphenyl phosphate, were found to be relatively ineffective for PUI films. Interestingly, the mechanical properties of PUI improved significantly upon the introduction of flame‐retardant additives. High thermal stability, and anti‐drip flame retardant properties, bestows these formulated PUIs excellent candidature as materials for applications where flame retardancy with anti‐drip is mandatory.