Borja Fernández-D’aRlas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Borja Fernández-D’aRlas has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Arantxa Eceiza
Group ‘Materials + Technologies’, Department of Chemical and Environmental Engineering, Faculty of Engineering of Gipuzkoa, University of the Basque Country UPV/EHU, Plaza Europa 1, Donostia-San Sebastian 20018, Spain
27 shared publications - Maria Angeles Corcuera
Group ‘Materials + Technologies’, Department of Chemical and Environmental Engineering, Faculty of Engineering of Gipuzkoa, University of the Basque Country, Pza Europa 1, 20018 Donostia-San Sebastian, Spain
19 shared publications - Ainara Saralegi
Group ‘Materials + Technologies’, Department of Chemical and Environmental Engineering, Faculty of Engineering of Gipuzkoa, University of the Basque Country UPV/EHU, Plaza Europa 1, Donostia-San Sebastian 20018, Spain
8 shared publications Iñaki Mondragon
Group ‘Materials + Technologies’, Department of Chemical and Environmental Engineering, Polytechnic School, University of the Basque Country, EHU/UPV, Donostia-San Sebastian, Spain
7 shared publications- Alejandro J. Müller
University of the Basque Country UPV/EHU Paseo Manuel Lardizabal 3
6 shared publications I. Mondragon
Materials + Technologies’ Group, Department of Chemical and Environmental Engineering, Polytechnic School, University of the Basque Country, Donostia-San Sebastián, Spain
6 shared publications
Latest Publications
- 8 August 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (16) , 7755-7767
Chemical Composition and Mechanical Deformation Define Lamellar Sizes in Aliphatic Triblock-Based Polyurethane Elastomers
- 8 August 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 57 (16) , 7755-7767
Chemical Composition and Mechanical Deformation Define Lamellar Sizes in Aliphatic Triblock-Based Polyurethane Elastomers
- Open Access
- 30 March 2023
- Published by Institut Quimic de Sarria in Afinidad. Journal of Chemical Engineering Theoretical and Applied Chemistry
- Vol. 80 (598) , 99-110
Afinidad entre queratosas de lana y distintos iones en fase acuosa analizada mediante sedimentación
En este artículo se presentan los resultados de unos sencillos ensayos de solubilidad de la queratina en medios tanto básico, cercano al punto isoeléctrico como ácido en presencia de distintas sales tales como haluros sódicos y potásicos, así como varios cloruros alcalinos. El efecto de la sal sobre la solubilidad de la queratina o queratosas se describe en términos de la Regla de Competitividad de Fajans o Regla de Afinidades al Agua Equivalente, en base a la distinta tendencia de los iones hacia la hidratación. La aplicación de este principio se orienta a explicar la competitividad de interacción entre iones de sales inorgánicas y grupos ionizados de los aminoácidos de la queratina.
- 30 March 2023
- Published by Institut Quimic de Sarria in Afinidad. Journal of Chemical Engineering Theoretical and Applied Chemistry
- Vol. 80 (598) , 99-110
Open AccessAfinidad entre queratosas de lana y distintos iones en fase acuosa analizada mediante sedimentación
En este artículo se presentan los resultados de unos sencillos ensayos de solubilidad de la queratina en medios tanto básico, cercano al punto isoeléctrico como ácido en presencia de distintas sales tales como haluros sódicos y potásicos, así como varios cloruros alcalinos. El efecto de la sal sobre la solubilidad de la queratina o queratosas se describe en términos de la Regla de Competitividad de Fajans o Regla de Afinidades al Agua Equivalente, en base a la distinta tendencia de los iones hacia la hidratación. La aplicación de este principio se orienta a explicar la competitividad de interacción entre iones de sales inorgánicas y grupos ionizados de los aminoácidos de la queratina.
- 25 August 2020
- Published by Wiley in POLYMER CRYSTALLIZATION
- Vol. 4 (1)
SSA fractionation of thermoplastic polyurethanes
- 25 August 2020
- Published by Wiley in POLYMER CRYSTALLIZATION
- Vol. 4 (1)
SSA fractionation of thermoplastic polyurethanes
- Open Access
- 15 October 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-12
Tough and Functional Cross-linked Bioplastics from Sheep Wool Keratin
Novel bioplastic films derived from wool keratins were prepared by protein solution in an alkaline mild oxidative method that splits disulphide (-S-S-) bonds. The native structure of the keratin macromolecules was partially modified upon extraction as revealed by the decrease of the β-sheet to α-helices/coils ratio but high molecular weight fractions (31, 22 and 13 KDa) was retained permitting film formation and plastic behaviour of films. Keratin films were plasticised with glycerol and sodium dodecyl sulphonic acid (SDS), which provided different hydrophobic character to bioplastics. Water content in the films depend on the relative humidity (RH), being able to absorb up to 35 wt% H2O at an ambient of 80% RH. Films were mechanically, thermally and optically analysed. The spectroscopic analyses revelled that these bioplastic films absorb UV light, what is interesting for packaging applications. Thermogravimetric and thermomechanical analysis revealed high stability of keratin macromolecules up to 200 °C with no inherent thermal transitions. Tough bioplastics (19 ± 4 MJ∙ m−3) were obtained after thermal cross-linking with glycerol and formaldehyde outperforming mechanical properties previously reported for protein films.
- 15 October 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-12
Open AccessTough and Functional Cross-linked Bioplastics from Sheep Wool Keratin
Novel bioplastic films derived from wool keratins were prepared by protein solution in an alkaline mild oxidative method that splits disulphide (-S-S-) bonds. The native structure of the keratin macromolecules was partially modified upon extraction as revealed by the decrease of the β-sheet to α-helices/coils ratio but high molecular weight fractions (31, 22 and 13 KDa) was retained permitting film formation and plastic behaviour of films. Keratin films were plasticised with glycerol and sodium dodecyl sulphonic acid (SDS), which provided different hydrophobic character to bioplastics. Water content in the films depend on the relative humidity (RH), being able to absorb up to 35 wt% H2O at an ambient of 80% RH. Films were mechanically, thermally and optically analysed. The spectroscopic analyses revelled that these bioplastic films absorb UV light, what is interesting for packaging applications. Thermogravimetric and thermomechanical analysis revealed high stability of keratin macromolecules up to 200 °C with no inherent thermal transitions. Tough bioplastics (19 ± 4 MJ∙ m−3) were obtained after thermal cross-linking with glycerol and formaldehyde outperforming mechanical properties previously reported for protein films.
- 1 January 2018
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 509, 102-112
Ion-macromolecule interactions studied with model polyurethanes
- 1 January 2018
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 509, 102-112
Ion-macromolecule interactions studied with model polyurethanes
- 5 July 2017
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 19 (32) , 4720-4733
Influence of composition on the isothermal crystallisation of segmented thermoplastic polyurethanes
The isothermal crystallisation of a series of segmented thermoplastic polyurethanes (TPUs) composed of 4,4′-methylene bisphenyl diisocyanate (MDI)-1,4-butanediol (BD) segments has been studied in detail. The influence of MDI-BD content within the TPUs on the nucleation, growth and resulting morphology has been analyzed by converging the results obtained from differential scanning calorimetry (DSC), polarised light optical microscopy (PLOM), synchrotron X-ray small angle scattering (SAXS), and atomic force microscopy (AFM). The materials crystallised from a single phase melt, as evidenced by SAXS. The increase of just 13 wt% in MDI-BD content leads to an increment of 4 orders of magnitude in the nucleation density and nucleation rate. In addition, the increase of MDI-BD content also enhances the spherulitic growth rate and overall crystallisation kinetics. The overall isothermal crystallisation kinetics determined by DSC can be described in an unusually large conversion range (i.e., beyond primary crystallisation) using the Avrami equation. The increase of the isothermal crystallisation temperature changes the superstructural morphology from spherulitic to axialitic, and therefore the Avrami index is reduced from approximately 3 to 2. Negative spherulites with the crystallographic c axis oriented tangentially to the spherulite were observed by PLOM and the spherulitic texture details were revealed by AFM and SAXS as a radial lamellar-like assembly of the MDI-BD segments. The energy barrier for nucleation and growth decreased exponentially with the increase in MDI-BD content. Finally, from all the evidence gathered here, a morphological schematic picture of the hierarchical structure of TPUs upon crystallisation is presented. The results presented in this report pave the way for a comprehensive guide to developing materials with the desired structure, based on the understanding of the intricate relationship between crystallinity, thermal history and composition of TPUs.
- 5 July 2017
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 19 (32) , 4720-4733
Influence of composition on the isothermal crystallisation of segmented thermoplastic polyurethanes
The isothermal crystallisation of a series of segmented thermoplastic polyurethanes (TPUs) composed of 4,4′-methylene bisphenyl diisocyanate (MDI)-1,4-butanediol (BD) segments has been studied in detail. The influence of MDI-BD content within the TPUs on the nucleation, growth and resulting morphology has been analyzed by converging the results obtained from differential scanning calorimetry (DSC), polarised light optical microscopy (PLOM), synchrotron X-ray small angle scattering (SAXS), and atomic force microscopy (AFM). The materials crystallised from a single phase melt, as evidenced by SAXS. The increase of just 13 wt% in MDI-BD content leads to an increment of 4 orders of magnitude in the nucleation density and nucleation rate. In addition, the increase of MDI-BD content also enhances the spherulitic growth rate and overall crystallisation kinetics. The overall isothermal crystallisation kinetics determined by DSC can be described in an unusually large conversion range (i.e., beyond primary crystallisation) using the Avrami equation. The increase of the isothermal crystallisation temperature changes the superstructural morphology from spherulitic to axialitic, and therefore the Avrami index is reduced from approximately 3 to 2. Negative spherulites with the crystallographic c axis oriented tangentially to the spherulite were observed by PLOM and the spherulitic texture details were revealed by AFM and SAXS as a radial lamellar-like assembly of the MDI-BD segments. The energy barrier for nucleation and growth decreased exponentially with the increase in MDI-BD content. Finally, from all the evidence gathered here, a morphological schematic picture of the hierarchical structure of TPUs upon crystallisation is presented. The results presented in this report pave the way for a comprehensive guide to developing materials with the desired structure, based on the understanding of the intricate relationship between crystallinity, thermal history and composition of TPUs.
- 4 October 2016
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 49 (20) , 7952-7964
Tailoring the Morphology and Melting Points of Segmented Thermoplastic Polyurethanes by Self-Nucleation
- 4 October 2016
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 49 (20) , 7952-7964
Tailoring the Morphology and Melting Points of Segmented Thermoplastic Polyurethanes by Self-Nucleation
- Open Access
- 23 August 2016
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 4 (4) , 275-284
Synthesis and Characterization of Polyurethane Rigid Foams from Soybean Oil-Based Polyol and Glycerol
- 23 August 2016
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 4 (4) , 275-284
Open AccessSynthesis and Characterization of Polyurethane Rigid Foams from Soybean Oil-Based Polyol and Glycerol
- 1 December 2015
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 122, 153-160
Studies on the morphology, properties and biocompatibility of aliphatic diisocyanate-polycarbonate polyurethanes
- 1 December 2015
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 122, 153-160
Studies on the morphology, properties and biocompatibility of aliphatic diisocyanate-polycarbonate polyurethanes