Lichun Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lichun Yang has a total of 110 co-authors. Here are the top co-authors by number of shared publications:
Min Zhu
School of Materials Science and Engineering and Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials South China University of Technology Guangzhou People's Republic of China
19 shared publications- Qingsheng Gao
College of Chemistry and Materials Science Jinan University Guangzhou P. R. China
13 shared publications Liuzhang Ouyang
9 shared publicationsWenbiao Zhang
College of Chemistry and Materials Science, Jinan University, Guangzhou 510632, PR China
9 shared publicationsWenjie Huang
8 shared publications- Min Zhu
South China University of Technology
7 shared publications
Latest Publications
- Open Access
- 5 November 2026
- Published by Wiley in Advanced Energy Materials
- p. e71804
Synergistic Anion Regulation Inducing Fluoride‐Rich SEI and Defect‐Rich MnO 2 for Stable Dual Electrode‐Free Zn‐MnO 2 Batteries
Dual electrode‐free (DEF) Zn─MnO 2 batteries based on dissolution‐deposition chemistry are promising candidates for large‐scale energy storage due to their lightweight architecture and high theoretical capacity (616 mAh g −1 ). However, poor interfacial reversibility and the accumulation of “dead manganese” significantly limit their lifespan. Here, we demonstrate a stable DEF battery enabled by an anion‐regulation strategy using a hybrid electrolyte (E‐OA) comprising trifluoromethanesulfonate (OTf − ) and acetate (Ac − ) ions. At the anode, OTf − facilitates the formation of a fluoride‐rich solid–electrolyte interphase (SEI), effectively suppressing dendrite growth and the hydrogen evolution reaction. At the cathode, the synergistic anionic environment elevates the MnO 2 nucleation overpotential, shifting the electrocrystallization pathway to an instantaneous nucleation mode. The kinetically driven growth process traps abundant structural defects, identified as proton‐compensated manganese vacancies (Ruetschi defects). These vacancies lower the thermodynamic energy barrier for Mn─O bond cleavage, thereby ensuring highly reversible dissolution. Consequently, the E‐OA‐based DEF battery achieves exceptional stability for over 7500 cycles at 0.5 mAh cm −2 and sustains 600 cycles at 2 mAh cm −2 (10 mA cm −2 ), demonstrating superior rate capability and versatility in both flow and gel battery configurations. This work provides a transformative strategy for high‐energy aqueous batteries via tailored anion chemistry and kinetics‐driven defect engineering.
- 5 November 2026
- Published by Wiley in Advanced Energy Materials
- p. e71804
Open AccessSynergistic Anion Regulation Inducing Fluoride‐Rich SEI and Defect‐Rich MnO 2 for Stable Dual Electrode‐Free Zn‐MnO 2 Batteries
Dual electrode‐free (DEF) Zn─MnO 2 batteries based on dissolution‐deposition chemistry are promising candidates for large‐scale energy storage due to their lightweight architecture and high theoretical capacity (616 mAh g −1 ). However, poor interfacial reversibility and the accumulation of “dead manganese” significantly limit their lifespan. Here, we demonstrate a stable DEF battery enabled by an anion‐regulation strategy using a hybrid electrolyte (E‐OA) comprising trifluoromethanesulfonate (OTf − ) and acetate (Ac − ) ions. At the anode, OTf − facilitates the formation of a fluoride‐rich solid–electrolyte interphase (SEI), effectively suppressing dendrite growth and the hydrogen evolution reaction. At the cathode, the synergistic anionic environment elevates the MnO 2 nucleation overpotential, shifting the electrocrystallization pathway to an instantaneous nucleation mode. The kinetically driven growth process traps abundant structural defects, identified as proton‐compensated manganese vacancies (Ruetschi defects). These vacancies lower the thermodynamic energy barrier for Mn─O bond cleavage, thereby ensuring highly reversible dissolution. Consequently, the E‐OA‐based DEF battery achieves exceptional stability for over 7500 cycles at 0.5 mAh cm −2 and sustains 600 cycles at 2 mAh cm −2 (10 mA cm −2 ), demonstrating superior rate capability and versatility in both flow and gel battery configurations. This work provides a transformative strategy for high‐energy aqueous batteries via tailored anion chemistry and kinetics‐driven defect engineering.
Decoupling Bulk Kinetics and Surface Stability: A Dual‐Regulation Strategy for High‐Performance Ammonium Vanadate Cathodes in Aqueous Zinc‐Ion Batteries
Aqueous zinc‐ion batteries (AZIBs) hold promise for sustainable energy storage, but high‐capacity ammonium vanadate (NH 4 V 4 O 10 , NVO) cathodes suffer from sluggish Zn 2+ kinetics and structural degradation via vanadium dissolution. To overcome these persistent bottlenecks, we propose a decoupled dual‐modification strategy integrating the controlled partial substitution of interlayer NH 4 + with hydronium ions (H 3 O + ) and the in‐situ formation of a conformal poly(3,4‐ethylenedioxythiophene) (PEDOT) conductive network. Mechanistic and density functional theory (DFT) studies reveal that acid‐induced proton exchange expands the interlayer spacing, significantly lowering the Zn 2+ diffusion barrier. Conversely, the PEDOT coating acts as a “structural‐electronic” bridge, compensating for the conductivity loss associated with deammoniation while serving as a robust physical barrier that suppresses the formation of the electrochemically inactive Zn 3 (OH) 2 V 2 O 7 ·2H 2 O passivation layer. The resulting NVO@PEDOT cathode delivers an exceptional specific capacity of 360.2 mAh g −1 , superior rate capability (110 mAh g −1 at an ultra‐high current density of 30 A g −1 ), and remarkably robust cycling stability. It retains 94.0% of the capacity after 200 cycles at 0.5 A g −1 and 69.2% after 10 000 cycles at a high rate of 15 A g −1 . This work establishes a versatile design strategy for decoupling kinetic and stability challenges in the cathode, paving the way for practical, high‐rate AZIBs.
Decoupling Bulk Kinetics and Surface Stability: A Dual‐Regulation Strategy for High‐Performance Ammonium Vanadate Cathodes in Aqueous Zinc‐Ion Batteries
Aqueous zinc‐ion batteries (AZIBs) hold promise for sustainable energy storage, but high‐capacity ammonium vanadate (NH 4 V 4 O 10 , NVO) cathodes suffer from sluggish Zn 2+ kinetics and structural degradation via vanadium dissolution. To overcome these persistent bottlenecks, we propose a decoupled dual‐modification strategy integrating the controlled partial substitution of interlayer NH 4 + with hydronium ions (H 3 O + ) and the in‐situ formation of a conformal poly(3,4‐ethylenedioxythiophene) (PEDOT) conductive network. Mechanistic and density functional theory (DFT) studies reveal that acid‐induced proton exchange expands the interlayer spacing, significantly lowering the Zn 2+ diffusion barrier. Conversely, the PEDOT coating acts as a “structural‐electronic” bridge, compensating for the conductivity loss associated with deammoniation while serving as a robust physical barrier that suppresses the formation of the electrochemically inactive Zn 3 (OH) 2 V 2 O 7 ·2H 2 O passivation layer. The resulting NVO@PEDOT cathode delivers an exceptional specific capacity of 360.2 mAh g −1 , superior rate capability (110 mAh g −1 at an ultra‐high current density of 30 A g −1 ), and remarkably robust cycling stability. It retains 94.0% of the capacity after 200 cycles at 0.5 A g −1 and 69.2% after 10 000 cycles at a high rate of 15 A g −1 . This work establishes a versatile design strategy for decoupling kinetic and stability challenges in the cathode, paving the way for practical, high‐rate AZIBs.
- 23 July 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 692
Epoxy-silane crosslinked sulfonated polythiophene interphase for high-performance alkaline nickel–zinc anodes
- 23 July 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 692
Epoxy-silane crosslinked sulfonated polythiophene interphase for high-performance alkaline nickel–zinc anodes
- Open Access
- 12 July 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (32) , e71285
Conversion‐Derived Hierarchical Li‐In/Li 2 O Interphase for Dendrite‐Free Lithium Metal Batteries With Suppressed Anode‐to‐Cathode Crosstalk
The practical use of lithium metal anodes is hindered by dendrite growth, unstable solid electrolyte interphase (SEI) formation, and anode‐to‐cathode crosstalk, particularly when paired with high‐nickel cathodes. Herein, a scalable strategy is reported to construct an In 2 O 3 nanolayer on a copper foil via magnetron sputtering. During initial lithiation, this layer irreversibly converts into a Li‐In/Li 2 O composite interphase. The lithiophilic Li‐In alloy inner layer lowers the nucleation barrier, while the in situ‐formed Li 2 O matrix acts as a high‐modulus framework that constrains the alloy phase, suppresses parasitic electrolyte reduction, and directs the formation of a robust, inorganic‐dominated SEI. The engineered anode achieves 98.5% coulombic efficiency over 500 cycles in half‐cells, and sustains stable symmetric‐cell operation for over 11 000 h. In full cells with LiNi 0.9 Co 0.05 Mn 0.05 O 2 (NCM90) cathodes, the anodic stabilization suppresses anode‐to‐cathode crosstalk, leading to a thin, uniform cathode electrolyte interphase (CEI) that preserves the morphological and structural integrity of the NCM90 cathode. Under stringent conditions (negative‐to‐positive ratio = 1.5, 3 µL mAh −1 , 60°C, 4.4 V), the cell retains 82.4% capacity after 100 cycles. A 6.5 Ah anode‐free pouch cell delivers 508.6 Wh kg −1 with 81.7% capacity retention after 40 cycles, underscoring the scalability and practical viability of this interfacial engineering approach.
- 12 July 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (32) , e71285
Open AccessConversion‐Derived Hierarchical Li‐In/Li 2 O Interphase for Dendrite‐Free Lithium Metal Batteries With Suppressed Anode‐to‐Cathode Crosstalk
The practical use of lithium metal anodes is hindered by dendrite growth, unstable solid electrolyte interphase (SEI) formation, and anode‐to‐cathode crosstalk, particularly when paired with high‐nickel cathodes. Herein, a scalable strategy is reported to construct an In 2 O 3 nanolayer on a copper foil via magnetron sputtering. During initial lithiation, this layer irreversibly converts into a Li‐In/Li 2 O composite interphase. The lithiophilic Li‐In alloy inner layer lowers the nucleation barrier, while the in situ‐formed Li 2 O matrix acts as a high‐modulus framework that constrains the alloy phase, suppresses parasitic electrolyte reduction, and directs the formation of a robust, inorganic‐dominated SEI. The engineered anode achieves 98.5% coulombic efficiency over 500 cycles in half‐cells, and sustains stable symmetric‐cell operation for over 11 000 h. In full cells with LiNi 0.9 Co 0.05 Mn 0.05 O 2 (NCM90) cathodes, the anodic stabilization suppresses anode‐to‐cathode crosstalk, leading to a thin, uniform cathode electrolyte interphase (CEI) that preserves the morphological and structural integrity of the NCM90 cathode. Under stringent conditions (negative‐to‐positive ratio = 1.5, 3 µL mAh −1 , 60°C, 4.4 V), the cell retains 82.4% capacity after 100 cycles. A 6.5 Ah anode‐free pouch cell delivers 508.6 Wh kg −1 with 81.7% capacity retention after 40 cycles, underscoring the scalability and practical viability of this interfacial engineering approach.
- 15 May 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (10) , e70714
Multifunctional Polypyrrole Interphase Actively Manages Anion Transport for Stable, High‐Rate Zinc Anodes
Zinc–nickel batteries (ZNBs) are a promising energy storage technology owing to their high output voltage, inherent safety, and cost‐effectiveness. However, their practical application is limited by zinc‐anode instability in alkaline electrolyte, which leads to performance‐degrading dendrite growth and passivation. To address this issue, we introduce an electropolymerized polypyrrole (PPy) film as a multifunctional artificial solid electrolyte interphase to stabilize the anode. The PPy layer facilitates the desolvation of OH − ions during discharge, enhancing reaction kinetics, while simultaneously restricting the diffusion of Zn(OH) 4 2− ions into the bulk electrolyte, thereby mitigating dendrite growth and anode passivation. Consequently, a full battery incorporating the protected anode with a Ni(OH) 2 cathode (ZnO@PPy||Ni(OH) 2 ) exhibits exceptional performance. Operating with a low electrolyte‐to‐capacity (E/DC) ratio of 0.05 mL mAh −1 and a high depth of discharge of 100%, the battery delivers 565 mAh g −1 after 245 stable cycles at 1 C. Moreover, when charged at 1 C and discharged at 10 C, it maintains 620 mAh g −1 over 340 cycles, with capacity retention of 94%. This work presents a simple and effective strategy for developing protective layers for Zn‐based anodes, offering a new design paradigm for engineering active electrode–electrolyte interphases to enable high‐performance ZNBs.
- 15 May 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (10) , e70714
Multifunctional Polypyrrole Interphase Actively Manages Anion Transport for Stable, High‐Rate Zinc Anodes
Zinc–nickel batteries (ZNBs) are a promising energy storage technology owing to their high output voltage, inherent safety, and cost‐effectiveness. However, their practical application is limited by zinc‐anode instability in alkaline electrolyte, which leads to performance‐degrading dendrite growth and passivation. To address this issue, we introduce an electropolymerized polypyrrole (PPy) film as a multifunctional artificial solid electrolyte interphase to stabilize the anode. The PPy layer facilitates the desolvation of OH − ions during discharge, enhancing reaction kinetics, while simultaneously restricting the diffusion of Zn(OH) 4 2− ions into the bulk electrolyte, thereby mitigating dendrite growth and anode passivation. Consequently, a full battery incorporating the protected anode with a Ni(OH) 2 cathode (ZnO@PPy||Ni(OH) 2 ) exhibits exceptional performance. Operating with a low electrolyte‐to‐capacity (E/DC) ratio of 0.05 mL mAh −1 and a high depth of discharge of 100%, the battery delivers 565 mAh g −1 after 245 stable cycles at 1 C. Moreover, when charged at 1 C and discharged at 10 C, it maintains 620 mAh g −1 over 340 cycles, with capacity retention of 94%. This work presents a simple and effective strategy for developing protective layers for Zn‐based anodes, offering a new design paradigm for engineering active electrode–electrolyte interphases to enable high‐performance ZNBs.
- 13 January 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (3) , 1538-1546
Atomic Molybdenum on Porous N-Doped Carbon Enables Catalytic SEI Engineering for Stable Lithium Storage
- 13 January 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (3) , 1538-1546
Atomic Molybdenum on Porous N-Doped Carbon Enables Catalytic SEI Engineering for Stable Lithium Storage
- Open Access
- 15 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (2) , 738-771
Mechanisms, development, and applications of silicon-based anodes in solid state batteries
This review focuses on the application of Si-based materials in high-energy-density SSBs, systematically organizing major research progress in SSBs centered on Si-based anodes and proposes targeted potential future research directions.
- 15 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (2) , 738-771
Open AccessMechanisms, development, and applications of silicon-based anodes in solid state batteries
This review focuses on the application of Si-based materials in high-energy-density SSBs, systematically organizing major research progress in SSBs centered on Si-based anodes and proposes targeted potential future research directions.
- 9 December 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 707, 139646
Dynamic interfacial anchoring in core-shell MoS2-coated Sn anodes enables ultrastable lithium storage
- 9 December 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 707, 139646
Dynamic interfacial anchoring in core-shell MoS2-coated Sn anodes enables ultrastable lithium storage
- 16 July 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 537
Few-layer graphene-encapsulated amorphous Sn4P3-P: A high-capacity and long-cycle-life anode for lithium-ion batteries
- 16 July 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 537
Few-layer graphene-encapsulated amorphous Sn4P3-P: A high-capacity and long-cycle-life anode for lithium-ion batteries