Debjyoti Sahu
Research Subjects
Debjyoti Sahu has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Praveen Alok
5 shared publicationsAnil Verma
Centre for Energy, Indian Institute of Technology Guwahati, Guwahati, Assam 781039, India
2 shared publications- Prashant Mishra
Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati 781039, Assam, India
2 shared publications A. S. Divakar Shetty
Ibri College of Technology
1 shared publicationBanala Dinesh
Dept of Mechanical Engineering, Amrita School of Engineering, Bengaluru, Amrita Vishwa Vidyapeetham, Amrita University, India
1 shared publicationDilushi Herath
1 shared publication
Latest Publications
- Open Access
- 12 February 2026
- Published by Elsevier in Next Sustainability
- Vol. 7
Linear Fresnel reflector type solar thermal concentrator system: A critical review on design parameters, and future in medium temperature applications
- 12 February 2026
- Published by Elsevier in Next Sustainability
- Vol. 7
Open AccessLinear Fresnel reflector type solar thermal concentrator system: A critical review on design parameters, and future in medium temperature applications
- 8 July 2025
- Published by Springer Nature
- p. 423-438
Enhancing Combustion Efficiency and Reducing Emissions: Biodiesel and Oxygenated Additives in Diesel Blends
- 8 July 2025
- Published by Springer Nature
- p. 423-438
Enhancing Combustion Efficiency and Reducing Emissions: Biodiesel and Oxygenated Additives in Diesel Blends
- 1 January 2025
- Published by Engineered Science Publisher in ES Chemistry and Sustainability
Chemical Pathways, Detection and Nanomedicine in Tumor-on-a-Chip: A Brief Review
Tumor-on-a-Chip models tumor behavior, aiding drug testing and nanotherapy, and treatment resistance.
- 1 January 2025
- Published by Engineered Science Publisher in ES Chemistry and Sustainability
Chemical Pathways, Detection and Nanomedicine in Tumor-on-a-Chip: A Brief Review
Tumor-on-a-Chip models tumor behavior, aiding drug testing and nanotherapy, and treatment resistance.
- 15 May 2024
- Published by Springer Nature
- p. 55-68
Load Response of a CI Engine Fuelled with BioDiesel Blends with Selected Additives
- 15 May 2024
- Published by Springer Nature
- p. 55-68
Load Response of a CI Engine Fuelled with BioDiesel Blends with Selected Additives
- 11 March 2022
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 8 (2) , 157-168
Numerical analysis of a two-phase injection refrigeration cycle using R32
The present paper reports the performance of a popular refrigerant R32 (Difluoromethane, CF2H2) experiencing the two phase injection process. Two phase injection process may lower the discharge temperature of a multistage compressor. In order to investigate the role and impact of two-phase injection on a compressor, a Scroll compressor is selected because scroll compressor has high tolerance for liquid refrigerant. A reputed compressor is chosen where all the operating conditions and specifications are available in public domain. The modelling and analysis of refrigeration system is carried out using a simple MATLAB code. Around 200 iterations were performed for four different condensing and evaporating temperatures. The maximum reduction in discharge temperature is found to be 44°C when compared to R410A used in the same system.
- 11 March 2022
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 8 (2) , 157-168
Numerical analysis of a two-phase injection refrigeration cycle using R32
The present paper reports the performance of a popular refrigerant R32 (Difluoromethane, CF2H2) experiencing the two phase injection process. Two phase injection process may lower the discharge temperature of a multistage compressor. In order to investigate the role and impact of two-phase injection on a compressor, a Scroll compressor is selected because scroll compressor has high tolerance for liquid refrigerant. A reputed compressor is chosen where all the operating conditions and specifications are available in public domain. The modelling and analysis of refrigeration system is carried out using a simple MATLAB code. Around 200 iterations were performed for four different condensing and evaporating temperatures. The maximum reduction in discharge temperature is found to be 44°C when compared to R410A used in the same system.
- 26 November 2020
- Published by Springer Nature
- p. 191-201
Comparative Study on Gasoline and Methanol in a Twin Spark IC Engine
- 26 November 2020
- Published by Springer Nature
- p. 191-201
Comparative Study on Gasoline and Methanol in a Twin Spark IC Engine
- 22 November 2020
- Published by Springer Nature
- p. 525-535
CFD Simulation of Gasoline and Methanol Combustion in a Twin Spark IC Engine
- 22 November 2020
- Published by Springer Nature
- p. 525-535
CFD Simulation of Gasoline and Methanol Combustion in a Twin Spark IC Engine
- Open Access
- 31 March 2020
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in International Journal of Automotive and Mechanical Engineering
- Vol. 17 (1) , 7805-7815
A Review on Magneto-Caloric Materials for Room Temperature Refrigeration
Magnetic Refrigeration is an environment-friendly technology when compared to the conventional gas compression system known as vapor compression refrigeration system. Room temperature magnetic refrigeration is a technology which relies on a solid material known as the Magneto-Caloric Material (MCM) which exhibits Magneto-Caloric Effect (MCE) near room temperature. The Magneto-Caloric Effect is the change in temperature of a magnetic material when that material is either magnetized/demagnetized adiabatically. This review is focused on the selection of a suitable MCM which exhibits near-room-temperature MCE. It also explains a methodology to estimate the amount of material required, based on the cooling load or refrigeration capacity (RC) calculation
- 31 March 2020
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in International Journal of Automotive and Mechanical Engineering
- Vol. 17 (1) , 7805-7815
Open AccessA Review on Magneto-Caloric Materials for Room Temperature Refrigeration
Magnetic Refrigeration is an environment-friendly technology when compared to the conventional gas compression system known as vapor compression refrigeration system. Room temperature magnetic refrigeration is a technology which relies on a solid material known as the Magneto-Caloric Material (MCM) which exhibits Magneto-Caloric Effect (MCE) near room temperature. The Magneto-Caloric Effect is the change in temperature of a magnetic material when that material is either magnetized/demagnetized adiabatically. This review is focused on the selection of a suitable MCM which exhibits near-room-temperature MCE. It also explains a methodology to estimate the amount of material required, based on the cooling load or refrigeration capacity (RC) calculation
- 20 March 2019
- Published by Springer Nature in International Journal of Air-Conditioning and Refrigeration
- Vol. 27 (01)
Numerical Simulation of Capillary Tube for Selected Refrigerants Using Homogeneous Equilibrium Model
In this work, a set of computational investigation results of two-phase refrigerant flow through adiabatic capillary are presented. There are various sizes of capillary tubes that can be selected related to commercially available copper tubes. Earlier refrigerants and new refrigerants like R12, R22, R134a, R410A and R32 are used for the flow analysis. Homogeneous-equilibrium model is employed with user-defined properties of the refrigerants for computation using ANSYS CFX. Several important parameters can be predicted rapidly and accurately using this method such as refrigerant mass flow rate, vapor mass fraction, local Mach no. etc. The mean deviation in mass flow rate is found to be [ ]1.18% for the same length of capillary tube and the mean deviation of tube length is found to be [ ]1.48% for the same experimental mass flow rate with choked flow condition.
- 20 March 2019
- Published by Springer Nature in International Journal of Air-Conditioning and Refrigeration
- Vol. 27 (01)
Numerical Simulation of Capillary Tube for Selected Refrigerants Using Homogeneous Equilibrium Model
In this work, a set of computational investigation results of two-phase refrigerant flow through adiabatic capillary are presented. There are various sizes of capillary tubes that can be selected related to commercially available copper tubes. Earlier refrigerants and new refrigerants like R12, R22, R134a, R410A and R32 are used for the flow analysis. Homogeneous-equilibrium model is employed with user-defined properties of the refrigerants for computation using ANSYS CFX. Several important parameters can be predicted rapidly and accurately using this method such as refrigerant mass flow rate, vapor mass fraction, local Mach no. etc. The mean deviation in mass flow rate is found to be [ ]1.18% for the same length of capillary tube and the mean deviation of tube length is found to be [ ]1.48% for the same experimental mass flow rate with choked flow condition.
- Open Access
- 22 September 2018
- Published by Science Publishing Corporation in International Journal of Engineering & Technology
- Vol. 7 (4.5) , 44-47
A Case Study on Solar Vapour Absorption Refrigeration System
Solar refrigeration may have applications in both developed and developing countries. Applications in developing countries such as air-conditioning, vaccine storage or large scale food preservation have been the subject of scientific research. Ammonia-water based system has good COP but generally vapor absorption refrigeration system requires high generator temperature and high circulating ratio aided by a powerful pump. Our objective was to trivialize the role of circulating ratio and simultaneously achieve higher COP. A prototype model was designed, fabricated in laboratory using scrap material and tested; performance of the unit has been analyzed. A parabolic solar trough was used as a source of heat. Various components were modeled in computer and analyzed using ANSYS. The performances and effectiveness of the unit was studied by determining refrigeration effect (RE) and coefficient of performance (COP).
- 22 September 2018
- Published by Science Publishing Corporation in International Journal of Engineering & Technology
- Vol. 7 (4.5) , 44-47
Open AccessA Case Study on Solar Vapour Absorption Refrigeration System
Solar refrigeration may have applications in both developed and developing countries. Applications in developing countries such as air-conditioning, vaccine storage or large scale food preservation have been the subject of scientific research. Ammonia-water based system has good COP but generally vapor absorption refrigeration system requires high generator temperature and high circulating ratio aided by a powerful pump. Our objective was to trivialize the role of circulating ratio and simultaneously achieve higher COP. A prototype model was designed, fabricated in laboratory using scrap material and tested; performance of the unit has been analyzed. A parabolic solar trough was used as a source of heat. Various components were modeled in computer and analyzed using ANSYS. The performances and effectiveness of the unit was studied by determining refrigeration effect (RE) and coefficient of performance (COP).