Daniel A. White
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel A. White has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Jonathan L. Belof
Lawrence Livermore National Laboratory
5 shared publications - Charles Fredrick Jekel
Lawrence Livermore National Laboratory, Livermore, CA, USA
4 shared publications - Dane M. Sterbentz
Lawrence Livermore National Laboratory
4 shared publications - Daniel Tortorelli
Lawrence Livermore National Laboratory (LLNL), Livermore, CA, USA
2 shared publications - Kevin Korner
Lawrence Livermore National Laboratory
2 shared publications - Robert Rieben
Lawrence Livermore National Laboratory , Livermore, California 94550, USA
2 shared publications
Latest Publications
- 12 June 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 114 (2) , 025303
Multiagent design assistant for the simulation of inertial fusion energy
Inertial fusion energy promises nearly unlimited, clean power, if it can be achieved. However, the design and engineering of fusion systems requires controlling and manipulating matter at extreme energies and timescales; the shock physics and radiation transport governing the physical behavior under these conditions are complex, requiring the development, calibration, and use of predictive multiphysics codes to navigate the highly nonlinear and multifaceted design landscape. We hypothesize that artificial intelligence reasoning models can be combined with physics codes and emulators to autonomously design fusion fuel capsules. In this article we construct a multiagent system where natural language is utilized to explore the complex physics regimes around fusion energy. The agentic system is capable of executing a high-order multiphysics inertial fusion computational code. We demonstrate the capacity of the multiagent design assistant to translate natural-language design goals into simulation execution, physics-emulator construction, analysis, and iterative refinement of capsule-geometry parameters, ultimately achieving simulated ignition within the computational design workflow.
- 12 June 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 114 (2) , 025303
Multiagent design assistant for the simulation of inertial fusion energy
Inertial fusion energy promises nearly unlimited, clean power, if it can be achieved. However, the design and engineering of fusion systems requires controlling and manipulating matter at extreme energies and timescales; the shock physics and radiation transport governing the physical behavior under these conditions are complex, requiring the development, calibration, and use of predictive multiphysics codes to navigate the highly nonlinear and multifaceted design landscape. We hypothesize that artificial intelligence reasoning models can be combined with physics codes and emulators to autonomously design fusion fuel capsules. In this article we construct a multiagent system where natural language is utilized to explore the complex physics regimes around fusion energy. The agentic system is capable of executing a high-order multiphysics inertial fusion computational code. We demonstrate the capacity of the multiagent design assistant to translate natural-language design goals into simulation execution, physics-emulator construction, analysis, and iterative refinement of capsule-geometry parameters, ultimately achieving simulated ignition within the computational design workflow.
- Open Access
- 10 April 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (14) , 145102
Passive Freeze-Out of the Richtmyer-Meshkov Instability
The Richtmyer-Meshkov instability (RMI) poses a major challenge in inertial confinement fusion (ICF) due to its role in mixing and performance degradation. We report the first experimental observation of passive freeze-out of RMI in a low-pressure surrogate regime, an instability stagnation effect induced without modifying the driving pressure pulse or the target surface geometry. Using additively manufactured subsurface voids in a sinusoidal target, we convert a single shock into a sequence of weaker shocks that suppress instability growth upstream of the surface by over 70%. High-speed x-ray imaging and hydrodynamic simulations suggest that this suppression arises primarily from temporal shaping, with lesser contributions from spatial curvature and shock weakening. Our results demonstrate a driver-independent pathway for controlling shock-driven hydrodynamic instabilities relevant to ICF and other high energy density systems.
- 10 April 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (14) , 145102
Open AccessPassive Freeze-Out of the Richtmyer-Meshkov Instability
The Richtmyer-Meshkov instability (RMI) poses a major challenge in inertial confinement fusion (ICF) due to its role in mixing and performance degradation. We report the first experimental observation of passive freeze-out of RMI in a low-pressure surrogate regime, an instability stagnation effect induced without modifying the driving pressure pulse or the target surface geometry. Using additively manufactured subsurface voids in a sinusoidal target, we convert a single shock into a sequence of weaker shocks that suppress instability growth upstream of the surface by over 70%. High-speed x-ray imaging and hydrodynamic simulations suggest that this suppression arises primarily from temporal shaping, with lesser contributions from spatial curvature and shock weakening. Our results demonstrate a driver-independent pathway for controlling shock-driven hydrodynamic instabilities relevant to ICF and other high energy density systems.
- Open Access
- 15 July 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (3)
Explosively driven Richtmyer–Meshkov instability jet suppression and enhancement via coupling machine learning and additive manufacturing
The ability to control the behavior of fluid instabilities at material interfaces, such as the shock-driven Richtmyer–Meshkov instability, is a grand technological challenge with a broad number of applications ranging from inertial confinement fusion experiments to explosively driven shaped charges. In this work, we use a linear-geometry shaped charge as a means of studying methods for controlling material jetting that results from the Richtmyer–Meshkov instability. A shaped charge produces a high-velocity jet by focusing the energy from the detonation of high explosives. The interaction of the resulting detonation wave with a hollowed cavity lined with a thin metal layer produces the unstable jetting effect. By modifying the characteristics of the detonation wave prior to striking the lined cavity, the kinetic energy of the jet can be enhanced or reduced. Modifying the geometry of the liner material can also be used to alter jetting properties. We apply optimization methods to investigate several design parameterizations for both enhancing or suppressing the shaped-charge jet. This is accomplished using 2D and 3D hydrodynamic simulations to investigate the design space that we consider. We also apply new additive manufacturing methods for producing the shaped-charge assemblies, which allow for the experimental testing of complicated design geometries obtained through computational optimization. We present a direct comparison of our optimized designs with experimental results carried out at the High Explosives Application Facility at Lawrence Livermore National Laboratory.
- 15 July 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (3)
Open AccessExplosively driven Richtmyer–Meshkov instability jet suppression and enhancement via coupling machine learning and additive manufacturing
The ability to control the behavior of fluid instabilities at material interfaces, such as the shock-driven Richtmyer–Meshkov instability, is a grand technological challenge with a broad number of applications ranging from inertial confinement fusion experiments to explosively driven shaped charges. In this work, we use a linear-geometry shaped charge as a means of studying methods for controlling material jetting that results from the Richtmyer–Meshkov instability. A shaped charge produces a high-velocity jet by focusing the energy from the detonation of high explosives. The interaction of the resulting detonation wave with a hollowed cavity lined with a thin metal layer produces the unstable jetting effect. By modifying the characteristics of the detonation wave prior to striking the lined cavity, the kinetic energy of the jet can be enhanced or reduced. Modifying the geometry of the liner material can also be used to alter jetting properties. We apply optimization methods to investigate several design parameterizations for both enhancing or suppressing the shaped-charge jet. This is accomplished using 2D and 3D hydrodynamic simulations to investigate the design space that we consider. We also apply new additive manufacturing methods for producing the shaped-charge assemblies, which allow for the experimental testing of complicated design geometries obtained through computational optimization. We present a direct comparison of our optimized designs with experimental results carried out at the High Explosives Application Facility at Lawrence Livermore National Laboratory.
- Open Access
- 24 July 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (4)
Linear shaped-charge jet optimization using machine learning methods
Linear shaped charges are used to focus energy into rapidly creating a deep linear incision. The general design of a shaped charge involves detonating a confined mass of high explosive (HE) with a metal-lined concave cavity on one side to produce a high velocity jet for the purpose of striking and penetrating a given material target. This jetting effect occurs due to the interaction of the detonation wave with the cavity geometry, which produces an unstable fluid phenomenon known as the Richtmyer–Meshkov instability and results in the rapid growth of a long narrow jet. We apply machine learning and optimization methods to hydrodynamics simulations of linear shaped charges to improve the simulated jet characteristics. The designs that we propose and investigate in this work generally involve modifying the behavior of the detonation waves prior to interaction with the liner material. These designs include the placement of multiple detonators and the use of metal inclusions within the HE. We are able to produce a linear shaped-charge design with a higher penetration depth than the baseline case that we consider and accomplish this using the same amount of or less HE.
- 24 July 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (4)
Open AccessLinear shaped-charge jet optimization using machine learning methods
Linear shaped charges are used to focus energy into rapidly creating a deep linear incision. The general design of a shaped charge involves detonating a confined mass of high explosive (HE) with a metal-lined concave cavity on one side to produce a high velocity jet for the purpose of striking and penetrating a given material target. This jetting effect occurs due to the interaction of the detonation wave with the cavity geometry, which produces an unstable fluid phenomenon known as the Richtmyer–Meshkov instability and results in the rapid growth of a long narrow jet. We apply machine learning and optimization methods to hydrodynamics simulations of linear shaped charges to improve the simulated jet characteristics. The designs that we propose and investigate in this work generally involve modifying the behavior of the detonation waves prior to interaction with the liner material. These designs include the placement of multiple detonators and the use of metal inclusions within the HE. We are able to produce a linear shaped-charge design with a higher penetration depth than the baseline case that we consider and accomplish this using the same amount of or less HE.
- Open Access
- 1 August 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (8)
Design optimization for Richtmyer–Meshkov instability suppression at shock-compressed material interfaces
The Richtmyer–Meshkov instability (RMI) is a phenomenon that occurs at the interface of two substances of different densities due to an impulsive acceleration, such as a shock wave passing through this interface. Under these conditions, the instability can be seen as interface perturbations begin to grow into narrow jets or spikes of one substance that propagate into the other. In some cases, this interface may involve an elastic–plastic material, which can play a significant role in the development and behavior of the RMI. The ability to effectively control RMI jetting and spike growth is one major limiting factor in technological challenges, such as inertial confinement fusion, that involve using high-pressure shock waves to implode a fuel target. The propagation of RMI growth can lead to increased asymmetry in this implosion process and significantly reduce the obtained energy yield. We use hydrodynamics simulations of impactor shock-compression experiments and methods based in design optimization to suppress RMI spike growth by altering the geometry and other properties of a shock-compressed elastic–plastic material target that shares an interface with atmospheric air. These hydrodynamics simulations use an arbitrary Lagrangian–Eulerian method with a high-order finite element approach. Our results demonstrate that RMI suppression can be achieved by intentionally creating a separate upstream interface instability to counteract the growth of long narrow RMI spikes at an interface with initial perturbations.
- 1 August 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (8)
Open AccessDesign optimization for Richtmyer–Meshkov instability suppression at shock-compressed material interfaces
The Richtmyer–Meshkov instability (RMI) is a phenomenon that occurs at the interface of two substances of different densities due to an impulsive acceleration, such as a shock wave passing through this interface. Under these conditions, the instability can be seen as interface perturbations begin to grow into narrow jets or spikes of one substance that propagate into the other. In some cases, this interface may involve an elastic–plastic material, which can play a significant role in the development and behavior of the RMI. The ability to effectively control RMI jetting and spike growth is one major limiting factor in technological challenges, such as inertial confinement fusion, that involve using high-pressure shock waves to implode a fuel target. The propagation of RMI growth can lead to increased asymmetry in this implosion process and significantly reduce the obtained energy yield. We use hydrodynamics simulations of impactor shock-compression experiments and methods based in design optimization to suppress RMI spike growth by altering the geometry and other properties of a shock-compressed elastic–plastic material target that shares an interface with atmospheric air. These hydrodynamics simulations use an arbitrary Lagrangian–Eulerian method with a high-order finite element approach. Our results demonstrate that RMI suppression can be achieved by intentionally creating a separate upstream interface instability to counteract the growth of long narrow RMI spikes at an interface with initial perturbations.
- Open Access
- 22 June 2022
- Published by Office of Scientific and Technical Information (OSTI)
Topology Optimization of Manufacturable Photonic Crystals With Complete Bandgaps [Dissertation]
The U.S. Department of Energy's Office of Scientific and Technical Information
- 22 June 2022
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessTopology Optimization of Manufacturable Photonic Crystals With Complete Bandgaps [Dissertation]
The U.S. Department of Energy's Office of Scientific and Technical Information
- 28 November 2019
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 61 (2) , 749-762
A dual mesh method with adaptivity for stress-constrained topology optimization
- 28 November 2019
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 61 (2) , 749-762
A dual mesh method with adaptivity for stress-constrained topology optimization
- 4 October 2018
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 59 (3) , 759-766
A computational study of symmetry and well-posedness of structural topology optimization
- 4 October 2018
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 59 (3) , 759-766
A computational study of symmetry and well-posedness of structural topology optimization
- 2 April 2018
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 58 (3) , 1205-1220
Toplogical optimization of structures using Fourier representations
- 2 April 2018
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 58 (3) , 1205-1220
Toplogical optimization of structures using Fourier representations