Xuzhuang Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xuzhuang Yang has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
Guanjun Gao
School of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, China
7 shared publications- Haiquan Su
Inner Mongolia University
3 shared publications Jingkai Yan
School of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, China
3 shared publicationsMin Zhao
School of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, China
3 shared publications- Chenhui Han
School of Chemistry and Chemical Engineering Inner Mongolia University Hohhot P.R. China
2 shared publications Feifei Li
School of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, China
2 shared publications
Latest Publications
- 15 May 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (13) , 3827-3836
Copper species-loaded hydrophobic Bi 2 WO 6 for photocatalytic reduction of carbon dioxide with water to methane
A hydrophobic copper oxide-loaded Bi 2 WO 6 catalyst, featuring exposed CuO nanoparticles and hydrophobic BDC-NH 2 -modified regions, demonstrates exceptional performance in photocatalytic CO 2 reduction.
- 15 May 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (13) , 3827-3836
Copper species-loaded hydrophobic Bi 2 WO 6 for photocatalytic reduction of carbon dioxide with water to methane
A hydrophobic copper oxide-loaded Bi 2 WO 6 catalyst, featuring exposed CuO nanoparticles and hydrophobic BDC-NH 2 -modified regions, demonstrates exceptional performance in photocatalytic CO 2 reduction.
- 24 September 2024
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 8 (21) , 4945-4955
A high-loading catalyst of highly dispersed nickel species on acid-treated mesoporous clay layers for efficient CO and CO2 methanation
The catalyst, consisting of nickel-amino acid framework nanocrystals on acid modified clay layers, exhibited excellent activity and stability in CO and CO2 methanations due to its high content of dispersed Ni species.
- 24 September 2024
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 8 (21) , 4945-4955
A high-loading catalyst of highly dispersed nickel species on acid-treated mesoporous clay layers for efficient CO and CO2 methanation
The catalyst, consisting of nickel-amino acid framework nanocrystals on acid modified clay layers, exhibited excellent activity and stability in CO and CO2 methanations due to its high content of dispersed Ni species.
- 13 December 2021
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 12 (3) , 773-785
An efficient catalyst of CuPt/TiO2 for photocatalytic direct dehydrogenation of methanol to methyl formate at ambient temperature
CuPt alloy nanoparticles on TiO2 are highly effective for photocatalytic direct dehydrogenation of methanol to methyl formate at ambient temperature.
- 13 December 2021
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 12 (3) , 773-785
An efficient catalyst of CuPt/TiO2 for photocatalytic direct dehydrogenation of methanol to methyl formate at ambient temperature
CuPt alloy nanoparticles on TiO2 are highly effective for photocatalytic direct dehydrogenation of methanol to methyl formate at ambient temperature.
- Open Access
- 26 August 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (52) , 31442-31452
Photocatalytic partial oxidation of methanol to methyl formate under visible light irradiation on Bi-doped TiO 2 via tuning band structure and surface hydroxyls
Preparing visible light responsive catalysts for partial oxidation of methanol to methyl formate is a challenging issue. This work addresses the synthesis, characterization and theoretical calculation of Bi doped TiO2 catalysts as well as their photocatalytic performance and reaction mechanism for MF synthesis from methanol. The catalysts were prepared by a simple wet chemical method. The results of the characterization and theoretical calculation evidenced that bismuth was intercalated in the lattice of anatase by the substitution of titanium. Impurity levels were formed in the valence band, conduction band and between the two bands. The Bi 6s and 5p orbitals contributed to the formation of the impurity levels. The photo-excited electrons transited from the valence band via impurity levels, formed by Bi 6s orbitals, to the conduction band. The doping of Bi enhanced surface hydroxyls, reduced the band gaps and raised the valence band edges (VBE) of the Bi doped catalyst. The Bi doped catalysts were visible light responsive due to the reduced band gap. The surface hydroxyls were beneficial to the methanol conversion, and the rise of the VBE enhanced the redox potential of the photogenerated holes. Only moderate redox potentials and sufficient surface hydroxyls could lead to high methanol conversion and MF selectivity. This study is of great significance to the development of the photocatalytic synthesis theory and provides a green route for MF synthesis from methanol.
- 26 August 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (52) , 31442-31452
Open AccessPhotocatalytic partial oxidation of methanol to methyl formate under visible light irradiation on Bi-doped TiO 2 via tuning band structure and surface hydroxyls
Preparing visible light responsive catalysts for partial oxidation of methanol to methyl formate is a challenging issue. This work addresses the synthesis, characterization and theoretical calculation of Bi doped TiO2 catalysts as well as their photocatalytic performance and reaction mechanism for MF synthesis from methanol. The catalysts were prepared by a simple wet chemical method. The results of the characterization and theoretical calculation evidenced that bismuth was intercalated in the lattice of anatase by the substitution of titanium. Impurity levels were formed in the valence band, conduction band and between the two bands. The Bi 6s and 5p orbitals contributed to the formation of the impurity levels. The photo-excited electrons transited from the valence band via impurity levels, formed by Bi 6s orbitals, to the conduction band. The doping of Bi enhanced surface hydroxyls, reduced the band gaps and raised the valence band edges (VBE) of the Bi doped catalyst. The Bi doped catalysts were visible light responsive due to the reduced band gap. The surface hydroxyls were beneficial to the methanol conversion, and the rise of the VBE enhanced the redox potential of the photogenerated holes. Only moderate redox potentials and sufficient surface hydroxyls could lead to high methanol conversion and MF selectivity. This study is of great significance to the development of the photocatalytic synthesis theory and provides a green route for MF synthesis from methanol.
- 17 October 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 9 (22) , 6240-6252
Copper on the inner surface of mesoporous TiO2 hollow spheres: a highly selective photocatalyst for partial oxidation of methanol to methyl formate
To raise the methyl formate (MF) selectivity at high methanol conversion is one of the most challenging topics for photocatalytic partial oxidation of methanol to MF. This work addresses the enhancement of the MF selectivity and methanol conversion by designing a new structure of Cu@TiO2 double layered hollow spheres with copper species dispersed on the inner surface of the mesoporous titania shell. We found that the new structure exhibited excellent MF selectivity at high methanol conversion for photocatalytic oxidation of methanol. The photocatalytic performance showed a close relation to its specific structure. The porous titania shell supplied sufficient surface areas for methanol chemisorption. The inner copper layer played important roles in accepting photoexcited electrons from the titania layer. Oxygen molecules chemisorbed on the negatively charged copper surfaces dissociated into active oxygen species and spilled to fill the oxygen vacancies on the titania layer. The pores on the titania shell were beneficial to oxygen inward diffusion, but methanol molecules were blocked from contact with the active oxygen species around the inner copper nanoparticles because of methanol molecules reacting with the surface hydroxyls at the opening of the pores as well as the refinement of the pore size, avoiding deep oxidation. The MF selectivity was proportional to the amount of surface hydroxyls. The light intensity was proportional to methanol conversion but of no relevance to the MF selectivity. The oxidation of methoxy to formaldehyde had a strong relation with light intensity and was the rate-determining step of the reaction, while the coupling reaction between methoxy and formaldehyde had a close relation to the reaction temperature. The catalyst had an induction period during which CuO was reduced to metallic Cu. The highest MF selectivity could be obtained at the stoichiometric ratio of methanol to oxygen, and the methanol conversion increased but the MF selectivity sharply deceased with the increase of oxygen partial pressure. The structure can be controlled by modulating the preparation parameters. This study may contribute to the design of new catalytic systems and provide an applicable green route to MF synthesis.
- 17 October 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 9 (22) , 6240-6252
Copper on the inner surface of mesoporous TiO2 hollow spheres: a highly selective photocatalyst for partial oxidation of methanol to methyl formate
To raise the methyl formate (MF) selectivity at high methanol conversion is one of the most challenging topics for photocatalytic partial oxidation of methanol to MF. This work addresses the enhancement of the MF selectivity and methanol conversion by designing a new structure of Cu@TiO2 double layered hollow spheres with copper species dispersed on the inner surface of the mesoporous titania shell. We found that the new structure exhibited excellent MF selectivity at high methanol conversion for photocatalytic oxidation of methanol. The photocatalytic performance showed a close relation to its specific structure. The porous titania shell supplied sufficient surface areas for methanol chemisorption. The inner copper layer played important roles in accepting photoexcited electrons from the titania layer. Oxygen molecules chemisorbed on the negatively charged copper surfaces dissociated into active oxygen species and spilled to fill the oxygen vacancies on the titania layer. The pores on the titania shell were beneficial to oxygen inward diffusion, but methanol molecules were blocked from contact with the active oxygen species around the inner copper nanoparticles because of methanol molecules reacting with the surface hydroxyls at the opening of the pores as well as the refinement of the pore size, avoiding deep oxidation. The MF selectivity was proportional to the amount of surface hydroxyls. The light intensity was proportional to methanol conversion but of no relevance to the MF selectivity. The oxidation of methoxy to formaldehyde had a strong relation with light intensity and was the rate-determining step of the reaction, while the coupling reaction between methoxy and formaldehyde had a close relation to the reaction temperature. The catalyst had an induction period during which CuO was reduced to metallic Cu. The highest MF selectivity could be obtained at the stoichiometric ratio of methanol to oxygen, and the methanol conversion increased but the MF selectivity sharply deceased with the increase of oxygen partial pressure. The structure can be controlled by modulating the preparation parameters. This study may contribute to the design of new catalytic systems and provide an applicable green route to MF synthesis.
- 19 May 2014
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 16 (7) , 3603-3615
Selective oxidation of methanol to methyl formate on catalysts of Au–Ag alloy nanoparticles supported on titania under UV irradiation
We find that the Au–Ag alloy nanoparticles supported on titania exhibit superior methanol conversion and methyl formate selectivity for selective oxidation of methanol by low partial pressure oxygen in air under UV irradiation in the 15 °C–45 °C temperature range, with the highest methanol conversion above 90% and the highest selectivity towards methyl formate above 85%. The only by-product definitely detected is CO2. The superior photocatalytic performance of the catalyst is closely related to the special structure of the catalyst and the electronic properties of the alloy, which reduce the recombination of the photo-excited electron–hole pairs by transferring the photo-excited electrons in time from the conduction band of titania to the alloy on the one hand, and elevate the negative charge level of the alloy surface by the spd hybridization, the formation of Schottky barriers, the electron transfer from the conduction band of titania to the metal as well as the interband and intraband electron transitions under UV irradiation on the other hand. The photo-generated holes are responsible for the oxidation from methanol to coordinated methoxy, from coordinated methoxy to coordinated formaldehyde and finally to carbon dioxide. The methyl formate selectivity is dependent on the density of the surface methoxy. To enhance the efficiency of electron–hole separation is beneficial to the formation of the coordinated methoxy and coordinated formaldehyde and thus the selectivity to methyl formate. The negative charges on the surface of the metal are responsible for the dissociation of oxygen, which is the rate-determining step in the reaction. The dissociative oxygen repels the water molecules formed from the surface hydroxyls and refills the oxygen vacancies on the surface of titania. The surface oxygen is the acceptor of the hydrogen dissociated from methanol and/or methoxy and thus is beneficial for the formation of the coordinated methoxy and coordinated formaldehyde. The oxygen partial pressure remarkably influences the methanol conversion and the methyl formate selectivity. The light intensity has a remarkable impact on the methanol conversion but not on the methyl formate selectivity. These findings provide useful insight into the design of catalysts for selective oxidation of methanol to methyl formate in a more green way.
- 19 May 2014
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 16 (7) , 3603-3615
Selective oxidation of methanol to methyl formate on catalysts of Au–Ag alloy nanoparticles supported on titania under UV irradiation
We find that the Au–Ag alloy nanoparticles supported on titania exhibit superior methanol conversion and methyl formate selectivity for selective oxidation of methanol by low partial pressure oxygen in air under UV irradiation in the 15 °C–45 °C temperature range, with the highest methanol conversion above 90% and the highest selectivity towards methyl formate above 85%. The only by-product definitely detected is CO2. The superior photocatalytic performance of the catalyst is closely related to the special structure of the catalyst and the electronic properties of the alloy, which reduce the recombination of the photo-excited electron–hole pairs by transferring the photo-excited electrons in time from the conduction band of titania to the alloy on the one hand, and elevate the negative charge level of the alloy surface by the spd hybridization, the formation of Schottky barriers, the electron transfer from the conduction band of titania to the metal as well as the interband and intraband electron transitions under UV irradiation on the other hand. The photo-generated holes are responsible for the oxidation from methanol to coordinated methoxy, from coordinated methoxy to coordinated formaldehyde and finally to carbon dioxide. The methyl formate selectivity is dependent on the density of the surface methoxy. To enhance the efficiency of electron–hole separation is beneficial to the formation of the coordinated methoxy and coordinated formaldehyde and thus the selectivity to methyl formate. The negative charges on the surface of the metal are responsible for the dissociation of oxygen, which is the rate-determining step in the reaction. The dissociative oxygen repels the water molecules formed from the surface hydroxyls and refills the oxygen vacancies on the surface of titania. The surface oxygen is the acceptor of the hydrogen dissociated from methanol and/or methoxy and thus is beneficial for the formation of the coordinated methoxy and coordinated formaldehyde. The oxygen partial pressure remarkably influences the methanol conversion and the methyl formate selectivity. The light intensity has a remarkable impact on the methanol conversion but not on the methyl formate selectivity. These findings provide useful insight into the design of catalysts for selective oxidation of methanol to methyl formate in a more green way.
- 5 November 2013
- Published by Springer Nature in Catalysis Letters
- Vol. 144 (1) , 81-86
Visible Light Promoted Hydrochlorination of Olefin Over Pt, Au and Pd Supported on Zirconia
- 5 November 2013
- Published by Springer Nature in Catalysis Letters
- Vol. 144 (1) , 81-86
Visible Light Promoted Hydrochlorination of Olefin Over Pt, Au and Pd Supported on Zirconia
- 1 October 2008
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 95 (1) , 123-128
Interaction between metallic gold and support and its influence on catalysis
- 1 October 2008
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 95 (1) , 123-128
Interaction between metallic gold and support and its influence on catalysis
- 1 January 2008
- Published by Springer Nature in Reaction Kinetics and Catalysis Letters
- Vol. 93 (1) , 19-25
Oxidation of lean formaldehyde in air over an Au/CeO2 catalyst and its kinetics
- 1 January 2008
- Published by Springer Nature in Reaction Kinetics and Catalysis Letters
- Vol. 93 (1) , 19-25
Oxidation of lean formaldehyde in air over an Au/CeO2 catalyst and its kinetics