Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksii Vodka has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modeling Bass Guitar String Vibration with Frequency- and Fret-Dependent Damping for Real-Time Sound Generation

    by Oleksii Vodka, Mariia Shapovalova, Vitalii Ovcharenko, Olena Avdieieva

    This paper presents a linear mathematical model of bass guitar string vibration with experimentally identified, frequency- and fret-dependent modal damping, aimed at high-fidelity generative sound synthesis. To identify the string damping parameters across various frets and configurations, an experimental framework was developed to benchmark four structural identification methods: half-power bandwidth, I. Yoshida’s method, Discrete Fourier Transform Interpolation, and Hilbert-transform envelope approximation. Experiments were systematically conducted on Cort C4H, Ibanez RB 630, and Yamaha bass guitars. Based on the extracted parameter space, two audio generation strategies are formulated: a spectrum-driven harmonic reconstruction method (Method 1) and a physical modeling approach utilizing spatial wave equations (Method 2). The proposed linear approximation framework effectively captures the inverse relationship between the damping factor and fret numbers specifically on the E-string, while mapping linear increases on the G and D-strings. Quantitative verification using Sobolev norm differences demonstrates good agreement between the synthesized and original signals for the spectrum-driven method (Q = 0.031–0.057) and moderate agreement for the physics-based wave equation method (Q = 0.058–0.153). This reflects a trade-off in which the former achieves tighter spectral convergence, while the latter better preserves the physical, time-domain waveform structure. As both synthesis strategies are closed-form and computationally lightweight, the model is suitable for real-time implementation and the dynamic control of playing techniques (e.g., plucking location and, in principle, slap-type excitation), without relying on heavy, multi-gigabyte audio sample libraries.

  • Open Access

    Computer and mathematical modeling in problems of predicting reliability in case of gradual failures

    by Oleksiy Larin, Oleksii Vodka, Ksenia Potopalska

    The monograph presents the main contemporary concepts and challenges in reliability theory and provides solutions for predicting the reliability of engineering structures subjected to gradual failures and fatigue damage based on the theory of material damage. For students, postgraduates, professionals in Applied Mathematics and Computer Sciences.

  • Open Access

    Numerical study of the size effect and nucleation center concentration on the elastic properties of copper

    by Vladislav Zhykhariev, Mariia Shapovalova, Oleksii Vodka, Sergii Misiura

    This article presents the results of a numerical study on the influence of representative volume size and the concentration of initial nucleation centers on the elastic properties of polycrystalline copper, taking into account the anisotropy of its microstructure. The modeling was carried out in a voxel-based system using the finite element method within a numerical analysis environment, applying periodic boundary conditions. This approach enables the simulation of an infinite material structure and avoids edge effects. Three-dimensional geometric models of cubic specimens ranging in size from 5 to 20 voxels were constructed at various concentrations of crystallization points (from 5% to 25%). For each configuration, 100 independent statistical realizations with randomly distributed initial points were performed. This made it possible to obtain reliable estimates of the mean values and variances of the key mechanical properties. The effective values of Young’s modulus, shear modulus, and Poisson’s ratios were calculated depending on geometric parameters and microstructural variability. The distributions of the obtained values were analyzed using histograms and statistical parameters of the normal distribution. The results showed that increasing the size of the representative volume and the number of crystallization points reduces result variability and leads to convergence towards a stationary mean value. The maximum deviation of Young’s modulus across all realizations did not exceed 1.91%, indicating high stability and reproducibility of the calculated properties. It is shown that accounting for anisotropy through an appropriate grain orientation model enables significantly more accurate simulation of polycrystalline material behavior under various loading conditions. The proposed approach can be useful for improving the accuracy of numerical predictions of elastic properties in copper-based components and optimizing technological processes that shape the microstructure. Furthermore, the results can be applied in the design of structural elements with predictable stiffness characteristics, taking into account the internal structure and its influence on the macroscopic behavior of the material.

  • INFORMATION SYSTEM FOR DETERMINING THE STRESS-STRAIN STATE OF ELASTOMERS STRUCTURES BASED ON A NEURAL-NETWORK

    by Serhii Pohrebniak, Oleksii Vodka

    This work presents an information system designed to determine the mechanical characteristics of elastomeric materials through the integration of artificial neural networks with classical numerical analysis methods. A hybrid framework is proposed in which a neural network module approximate the experimental loading-unloading curve, including the Mullins effect as a key manifestation of material hysteresis. The predicted stress-strain response is incorporated into an iterative Newton-Raphson scheme to compute the tangent modulus of elasticity in the absence of analytical derivatives. Numerical stability is ensured by implementing an adaptive step-control mechanism, constraints on deformation corrections, and a local recovery procedure that prevents the propagation of divergence throughout the global solution. The system architecture is implemented as a cross-platform desktop application based on PySide6, combining interactive editing of the finite-element model structure, dynamic data validation, and maintenance of topological consistency through the delegation pattern. The model supports serialization and deserialization in CSV format, including field validation, automatic type conversion, and restoration of empty entries, thereby enabling reproducible calculations and reliable model exchange between users. The outputs of the system include both a graphical representation of the deformed structural configuration and a detailed analytical report containing nodal displacements and reactions, internal forces, strain measures, and resulting effective elastic moduli. The proposed system provides high computational stability and demonstrates practical applicability for modelling elastomers with pronounced nonlinear behaviour. The results highlight the potential of combining machine learning with classical mechanical techniques to advance modern tools for the engineering analysis.

  • Development of a mathematical model and software for determining the probabilistic characteristics of pure magnesium using cellular automata

    by O.O. Vodka, M.I. Shapovalova, V.V. Zhykhariev

    The article reviews a comprehensive approach to studying the mechanical behavior of polycrystalline magnesium. A methodology is proposed for studying the influence of the stochastic nature of the magnesium microstructure, conditioned by the peculiarities of its hexagonal close-packed (HCP) crystal lattice, on the variability of macroscopic elastic properties. The aim of the work was to determine the effective elastic characteristics of polycrystalline magnesium by analyzing stochastically generated microstructures and conducting a series of complex numerical experiments using the finite element method. In the studies, the cellular automata method was used to generate 100 independent three-dimensional models of Representative Volume Elements (RVEs) of the grain structure. These models differed in the random distribution of crystallization centers and the topology of grain boundaries, providing a representative sample of microstructural realizations. A series of numerical experiments was conducted for each generated model using the finite element method (FEM). The boundary conditions were realized by prescribing a displacement field corresponding to a set of unique strain loading scenarios. This allowed for the computation of the stress-strain state for each RVE. As a result of the study, the effective elastic characteristics of pure magnesium were determined, and their statistical analysis was performed. It was established that the distributions of Young's and shear moduli follow a normal law with a high degree of symmetry. Analysis of the obtained data demonstrated that, despite the pronounced local anisotropy of individual crystallites, polycrystalline magnesium exhibits quasi-isotropic behavior with stable averaged characteristics. Low standard deviations of the parameters indicate high statistical stability of the model. The results confirm the effectiveness of the proposed approach. This method allows for the accurate reproduction of the material's actual elastic characteristics with minimal error relative to reference data, eliminating the need for expensive laboratory testing

  • Open Access

    Investigation of the Impact of Uneven Fiber Distribution on Mechanical Properties of Composites Based on Voxel Models

    by Vladyslav Zhykhariev, Serhii Misiura, Oleksii Vodka, Mariia Shapovalova

    This study presents the results of numerical and experimental investigations into the impact of uneven fiber distribution in fiber-reinforced composites. A voxel-based model was developed using a Gaussian distribution with deviations of 5%, 10%, and 15% from an ideal hexagonal structure. Numerical simulations assessed the effect of microstructural statistical deviations on the elastic properties of composites. Computer vision methods were applied to analyze micrographs of real samples, enabling a comparison between modeled and actual material structures. The results demonstrated a significant influence of fiber misalignment on local stress concentrations and mechanical properties, validated by quantitative image analysis. This approach enhances the accuracy of predicting composite behavior under varying microstructural conditions.

  • Open Access

    ВИКОРИСТАННЯ ML-АЛГОРИТМІВ У ЗАДАЧАХ ТЕХНІЧНОЇ ДІАГНОСТИКИ ЕЛЕМЕНТІВ ГІДРОТУРБІННОГО ОБЛАДНАННЯ ГЕС

    by Д. А. Шаранов, О. О. Водка, О. І. Трубаєв

    У статті показано, що використання моделей штучного інтелекту (ШІ) суттєво підвищує точність виявлення аномалій, оптимізує обслуговування обладнання та знижує ризики аварій на ГЕС. На математичному рівні проаналізовані сучасні проблеми в застосуванні ML-алгоритмів у задачах технічної діагностики елементів гідротурбінного обладнання ГЕС. Проаналізовано найпоширеніші моделі: згорткові (CNN) і рекурентні (RNN) нейронні мережі, дерева рішень, Random Forest, XGBoost, SVM та методи кластеризації. Для кожного підходу розглянуто сильні сторони (наприклад, висока точність CNN у виявленні візуальних/часових патернів, інтерпретованість дерев рішень) та обмеження (наприклад, складність адаптації нейромереж до змінних режимів). Особливу увагу приділено підготовці вхідних даних, адаптації моделей до змін у роботі турбін та забезпеченню інтерпретованості результатів. Метою статті є узагальнення та впорядкування сучасних підходів і моделей машинного навчання, які використовуються для діагностики несправностей, оцінювання технічного стану та прогнозування залишкового ресурсу гідротурбін гідроелектростанцій. Результати. Обґрунтовано доцільність впровадження ML-алгоритмічних рішень у системи моніторингу та діагностики гідротурбін з метою підвищення їх надійності та ефективності. В ході дослідження було встановлено, що ML-моделі для технічної діагностики гідротурбін на ГЕС мають забезпечувати високу точність (> 90 %) та чутливість (> 85 %), при цьому залишаючись швидкими в прогнозуванні (< 0.1 сек) і стійкими до шуму. Найвищу точність прогнозування залишкового ресурсу гідротурбін за моделями ML – демонструє модель LSTM: 94,5 % при роботі з гідротурбінами типу Kaplan, що пов’язано з її здатністю враховувати довготривалі часові залежності. Середня квадратична помилка (MSE) для цього випадку становить лише 0,0072, а термін прогнозу досягає 12 місяців при часі обробки 2 секунди. Метод XGBoost, застосований до турбін Francis, забезпечує високу стабільність при роботі з обмеженими статистичними даними, досягаючи 91,3 % точності, MSE 0,0115 та прогнозного горизонту 9 місяців із часом обробки 1 секунда. Висновки впровадження рішень на основі ML у системи моніторингу та діагностики гідротурбін є доцільним з огляду на потребу підвищення надійності й ефективності їх експлуатації.

  • Open Access

    Development of an algorithm and software for modeling the structure and mechanical behavior of aerogels

    by Valeriia Rykova, Ксенія Потопальська, Rasul Abdusalamov, Oleksii Vodka, Mikhail Itskov, Валерія Рикова, Михайло Іцков

    Aerogels, ultra-low-density materials with remarkable properties, hold great potential for various technological applications. However, accurately modeling their internal structure is essential for understanding and optimizing their performance. This paper presents the development of an algorithm and software for modeling the structure and mechanical behavior of aerogels. The Diffusion-Limited Cluster-Cluster Aggregation (DLCA) algorithm serves as the foundation for generating realistic computational models of aerogel microstructures. This paper details the creation of algorithms that simulate the formation of aerogel structures based on DLCA principles. A dedicated software tool executes the DLCA algorithm, generating corresponding aerogel structures. Additionally, APDL (ANSYS Parametric Design Language) scripts translate the generated structures into finite element models for analysis in ANSYS software. Test calculations are performed on these models to evaluate displacements and stresses under simple loading conditions. This approach enhances the understanding and design of these versatile materials for various applications.