Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Matthew Lewis has a total of 103 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development and validation of flood inundation models for estuaries

    by Grigorios Vasilopoulos, Tom Coulthard, Peter Robins, Charlotte Lyddon, Andrew Barkwith, Nguyen Chien, Matt Lewis

    Estuaries, at the interface between catchment and coast, are vulnerable to flooding from the combination of riverine and marine inputs. High river flows generated from intense precipitation can occur synchronously with high tides and storm surges, amplifying flood hazard. In the United Kingdom 20 million people are estimated to live near estuaries, with estuarine flooding regarded as the costliest impact to these areas and second highest hazard to civil emergency. On-going global warming increases sea-levels and modifies hydroclimate variability, thus affecting river fluxes, tidal maxima and the intensify of storm surges. There is therefore a need for improved methods and tools to understand compound flooding events, their impacts and how they may change into the future. In the present paper we developed a validated flood inundation model for the Conwy estuary in North Wales, one of the flashiest catchments in Britain where flooding makes headline news at least once every year. The Caesar-Lisflood 2D hydrodynamic flow model was combined with a range of publicly available datasets to represent channel bathymetry, land elevation, location and heights of flood defences and the hydraulic roughness across the model domain. The model was forced with recorded time-series (15-minute resolution) of tidal oscillations and river discharge data and validated by comparing simulated water levels against observations from existing water level gauges within the estuarine channel. Flood predictions were validated against observed flood extents extracted from SAR imagery using the Google Earth Engine. Calibrated, ortho-corrected (GRD) C-band interferometric Synthetic Aperture Radar (SAR) images captured by the Sentinel-1 constellation of satellites using a dual-band cross-polarization (VH) was used. SAR images were filtered to remove speckle noise and Otsu’s method of thresholding was adopted to automatically extract inundated areas from each available image. Comparison of model-based simulated flood extents against their SAR-derived equivalents was used as a means to validate the flood inundation model.


  • Open Access

    Site characterization of META – the Marine Energy Test Area in Wales, UK

    by Simon Neill, Iain Fairley, Saul Young, Tom Hill, Nicholas King, Michael Roberts, Matthew Lewis, Martin Austin, Chris Unsworth, Dominic Reeve, et al.

    With lack of convergence on any single wave or tidal technology, test centres have a unique role in the marine renewable energy industry. Test centres facilitate real testing at sea for devices and components at various TRLs (Technology Readiness Level), reducing the time, cost, and risks faced by marine energy developers. META (Marine Energy Test Area) is a £2.7M project managed by Marine Energy Wales (MEW), consisting of eight test areas in the Milford Haven Waterway and surrounding waters (Pembrokeshire, Wales). Although various datasets have been collected from the META test areas over the last decade, and some aspects of these data have been published in various reports, the data has not been gathered together, systematically analyzed and critically assessed - the aim of this presentation. Here, the various META datasets are described and interpreted, including multibeam, ADCP (acoustic Doppler current profiler), and wave buoy data. We report the key parameters of relevance to testing at META, including bathymetry, the nature and magnitude of the tidal currents, turbulence, and wave climates. We make recommendations on future priorities for data collection at META, and discuss the future of the test areas, including expansion into floating wind and other evolving marine energy technologies.

  • Open Access

    Comparison of dense optical flow and PIV techniques for mapping surface current flow in tidal stream energy sites

    by J. McIlvenny, B. J. Williamson, I. A. Fairley, M. Lewis, S. Neill, I. Masters, D. E. Reeve

    Marine renewable energy site and resource characterisation, in particular tidal stream energy, require detailed flow measurements which often rely on high-cost in situ instrumentation which is limited in spatial extent. We hypothesise uncrewed aerial vehicles (UAV) offer a low-cost and low-risk data collection method for tidal stream environments, as recently techniques have been developed to derive flow from optical videography. This may benefit tidal and floating renewable energy developments, providing additional insight into flow conditions and complement traditional instrumentation. Benefits to existing data collection methods include capturing flow over a large spatial extent synchronously, which could be used to analyse flow around structures or for site characterisation; however, uncertainty and method application to tidal energy sites is unclear. Here, two algorithms are tested: large-scale particle image velocimetry using PIVlab and dense optical flow. The methods are applied on video data collected at two tidal stream energy sites (Pentland Firth, Scotland, and Ramsey Sound, Wales) for a range of flow and environmental conditions. Although average validation measures were similar (~ 20–30% error), we recommend PIVlab processed velocity data at tidal energy sites because we find bias (underprediction) in optical flow for higher velocities (> 1 m/s).


  • Open Access

    Hydrokinetic energy conversion: A global riverine perspective

    by Michael Ridgill, Matt J. Lewis, Peter E. Robins, Sopan D. Patil, Simon P. Neill

    Free-flowing rivers have been impacted by anthropogenic activity and extensive hydropower development. Despite this, many opportunities exist for context-specific energy extraction, at locations deemed undesirable for conventional hydropower plants, in ways that reduce the scale of operation and impact. Hydrokinetic energy conversion is a renewable energy technology that requires accurate resource assessment to support deployment in rivers. We use global-scale modeled river discharge data, combined with a high-resolution vectorized representation of river networks, to estimate channel form, flow velocities, and, hence, global hydrokinetic potential. Our approach is based directly on the transfer of kinetic energy through the river network, rather than conventional, yet less realistic, assessments that are based on conversion from gravitational potential energy. We show that this new approach provides a more accurate global distribution of the hydrokinetic resource, highlighting the importance of the lower-courses of major rivers. The resource is shown to have great potential on the continents of South America, Asia, and Africa. We calculate that the mean hydrokinetic energy of global rivers (excluding Greenland and Antarctica) is 5.911 ± 0.009 PJ (1.642 ± 0.003 TWh).


  • Open Access

    Using historic records of compound flood events to identify site-specific thresholds for flooding in UK estuaries

    by Peter Robins, Charlotte Lyddon, Matt Lewis, Andrew Barkwith, Greg Vasilopoulos, Tom Coulthard

    Estuarine flooding is driven by extreme sea-levels and river discharge, either occurring independently or at the same time, or in close succession to exacerbate the hazard, known as compound events. There is a need to identify site-specific thresholds for flooding in estuaries, which represent the magnitude of key drivers over which flooding occurs. Site-specific thresholds for flooding can be used to support forecasts and warnings, emergency response and long-term management plans. This research uses historic records of flooding in estuaries around the UK combined with 40 years of historical 15-minute frequency sea-level and river discharge data to establish the magnitude and relative timing of the drivers of flooding in 11 estuaries. The results identify estuaries which are more likely to experience flooding due to extreme compound events, e.g. Conwy, N-Wales, or independent extreme events e.g. Humber, E-England. The key limitation of using historic records of flooding is that not all flooding events have been documented, and there are gaps in the record. Therefore, this research also identified the top 50 extreme sea-level and river discharge events in the historic gauge measurements at each estuary, and cross-checked these against online sources (news reports and academic literature), to establish if these events also led to flooding. A more comprehensive historic record of flooding allows more accurate thresholds for flooding to set in each estuary. Future work will utilise numerical modelling tools in 4 estuaries to simulate flooding under different sea-level and river discharge conditions to further isolate accurate thresholds.

  • Open Access

    Historic spatial patterns of compound flood events in UK estuaries

    by Charlotte Lyddon, Peter Robins, Matt Lewis, Andrew Barkwith, Ivan Haigh, Greg Vasilopoulos, Tom Coulthard

    Combination estuarine flooding is driven by extreme sea-levels and river discharge occurring at the same time, or in close succession. We hypothesise the drivers of flooding rarely occur independently and operate and co-operate at sub-daily timescales. There is a need to accurately capture fluvial and sea-level interactions at a sub-daily timescale to understand the relative timing and duration of compound flooding hazards in estuaries to support forecasts and warnings, emergency response and long-term management plans. This research analyses the co-cooccurrence of extreme sea-level and river discharge events using historic river flow data from 126 gauges and tide gauge data from 27 locations across Britain, which were analysed to identify estuaries that are susceptible to compound flooding events. Daily mean and maximum river discharge, and river discharge at 15-minute frequency were analysed to identify extreme peaks in the records, and corresponding skew surge values identified within a time window based on average hydrograph duration. Results show that daily mean river discharge underestimates peaks in the record and does not accurately capture hydrograph behaviour. This research is the first time that 15-minute frequency river discharge data has been used to characterise hydrograph behaviour and identify i) peaks over threshold; ii) top 500 peaks and corresponding skew surges to determine dependence based on Kendall’s rank correlation and the number of occurrences between extreme drivers each storm season (May-June). Different methods of data selection and identification of peak river discharge events generates different results. The duration of river discharge peaks, total water level, lag time, and overlap between peaks is calculated to identify locations where co-occurrences are likely to happen. The results identify a clear east-west split in dependence, with gauges on the west coast of Britain showing stronger correlations. There are more co-occurrences of extreme sea and fluvial levels each storm season in Northwest England and West Scotland. Estuaries that are most susceptible to compound events based on the Kendall’s rank correlation τ, seasonal occurrences, and potential for river discharge and sea-level peaks to overlap based on duration and lag time are identified. The results identify 46 gauges that are highly susceptible to compound flooding, notably the Rivers Lune and Eden, with strongest correlation coefficients and highest number of seasonal occurrences. The results highlight spatial variability to the sensitivity of estuaries to combination flood hazard, and the impact of future changes in flood risk that are unresolved currently in management plans.

  • Open Access

    The importance of estuary shape in evaluating the flood risk in estuaries

    by Mirko Barada, Peter Robins, Matthew Lewis, Martin Skov

    Floods are a constant threat to communities within and around estuaries worldwide. This is because several drivers may occur there at the same time which leads to the compound flooding (e.g. high river discharge + storm surge). In this study LISFLOOD-FP hydrodynamic model is applied to examine the efficiency of different management strategies on flooding in the Dyfi Estuary, in Mid Wales. Five different bathymetries, including the current one, were developed in ArcGIS and included in the analysis: a) “hold the line”, b) “remove the line”, c) “advance the line”, d) “retreat the line”, e) “breach in the line”. Modified November 2020 compound flood event boundary conditions were forced from the coast and from the Dyfi bridge. Model results shown, among other things, that nature-based solutions in the lower estuary, represented by salt marshes and floodplain restoration measures, have a great potential in reducing water elevations across the estuary, unlike the advance the line scenario or the current bathymetry.Additionally, results obtained from different management scenarios are analyzed and compared against results from the selected design storm events. These events were based on modifying parameters such as 1) relative timing of flood peaks, 2) storm duration and 3) climate change sensitivity (SLR and increase in discharge) which provided set of different compound flood events that were forced by LISFLOOD, in combination with the current estuary shape, unlike when modelling different management scenarios. This approach enabled us to perform an effective comparative analysis which addressed the key hypothesis of the research stating that changes in estuary shape will have bigger effect on flooding than changes in flood event itself. Indeed, it is shown that variability in water elevations caused by different management scenarios is bigger compared to variability caused by changing the boundary conditions only, although not always leading to higher water elevations along the estuary.

  • Open Access

    Reducing uncertainty in dispersal predictions: validation of particle tracking model with drifter data.

    by Jonathan Demmer, Matthew Lewis, Rowan Rushton, Simon Neill

    Lagrangian Particle Tracking Models (PTMs) have a wide range of applications in the marine environment, from predicting the dispersal of microplastics to larval transport. In two decades computational power have increased exponentially allowing PTMs to move from probabilistic approaches (e.g. advection and random walk) to more deterministic methods (e.g. including animal behaviour and buoyancy).Validation of hydrodynamic models simulating oceanographic processes has allowed confidence in their accuracy at simulating mean-flow fields (i.e. at the order of tens of metres and minutes). However, methods to validate PTMs appear less developed due the complexity of biophysical process interactions; for example, wind and wave combined impact on surface currents and larvae behaviour such as vertical and horizontal swimming.Here, we use a novel set of data representing the travel of drifters in the Irish Sea during summer 2021. The experiment aim is to reduce the near surface flow uncertainty influencing particle dispersal (i.e. larvae, microplastics and pollutant). Data were collecting using a range of drifters designs released in coastal, estuarine and offshore locations of a tidally dominate shelf-sea (Irish Sea): 1) variation of  drogue depth between 1m and 5m; 2)  variation of period from tidal cycles to spring-neap cycles; and 3) some with reduced “windage” designs (no drogue and minimal exposure above surface).The results allowed us to measure the difference of dispersal between PTM created associated to high-resolution 3D hydrodynamic model and data collected. The validation of a deterministic PTM created will be presented, with a discussion of wind and wave impact on surface current flow and uncertainty of the PTM. For example, we find some scales of oceanographic processes that affect transport, such as turbulent eddies and waves, were not resolved - and yet our predictions broadly matched observations.

  • Open Access

    The influence of tides on the winter residual circulation of the North West European Shelf

    by Jonathan Tinker, Jeffrey Polton, Peter Robins, Matthew Lewis, Clare O'Neill

    The Northwest European Shelf Seas (NWS) are geographically complex and are dominated by tidal processes. Tides drive vertical mixing, stratification, and contribute to the residual circulation, which influences the spatial patterns of temperature and salinity. Tides are not modelled in the current generation of Global Climate Models (GCMs), which is one of the reasons that the NWS is typically poorly simulated in most GCMs. Marine climate impact studies usually require dynamic downscaling with a tidal coastal ocean model to make use of GCM model data. However, this is expensive – the direct use of GCM data (for the NWS) would be preferable. The impact of tides on the vertical mixing and stratification of the NWS has been extensively studied. Here we focus on the impact of tides on the residual circulation, and whether this can be parameterised in non-tidal models.We run a pair of NWS simulations with and without tides, to show the impact of tides on the NWS winter residual circulation. We show regional differences in temperature and salinity of up to ~0.5°C, and 0.5 psu, which can be explained by the changes in advective pathways associated with the differences in the residual circulation.We explore two processes by which the tides impact the residual circulation and investigate whether these could be parameterised within non-tidal GCMs: (1) Enhancing the seabed friction to mimic the equivalent energy loss from an oscillating tidal flow; (2) Tidal Phase-driven Transport (TPT), whereby tidal asymmetry drives a net transport due to the phase between tidal-elevation and velocities (equivalent to the bolus term in oceanographic literature).To parameterise the TPT, we calculate a climatology of the transport from a harmonic tidal analysis from the tidal model and add it into the Navier Stokes equations of the non-tidal model as an additional force. Additionally, we modify the bed drag coefficient to balance the bed stress between the simulations – hypothesising that using this modified bed drag coefficient will simulate the effect of the tides. The modified drag coefficient tends to improve the mean and variability of the residual circulation, while the TPT improves the spatial distribution and temporal variability of the temperature and salinity. We show that our proof-of-concept parameterisation can replicate the tidally-driven impact on the residual circulation without direct simulation, thus reducing computational effort.If our approach can be included in global ocean and climate models, we may be able to improve the representation of residual circulation in tidal regions, and their distribution and variability of tracers (including temperature, salinity and nutrients). This could allow some NWS impact studies to be based directly on GCM data, without the need for costly dynamic downscaling, making GCM data much more useful to end users in many regions around the world.This work has been submitted to Frontiers of Marine Science.

  • Top Cited Papers

    Sea level rise will change estuarine tidal energy: A review

    by Danial Khojasteh, Matthew Lewis, Sasan Tavakoli, Maryam Farzadkhoo, Stefan Felder, Gregorio Iglesias, William Glamore