Paul O'HIggins
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Paul O'HIggins has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Profico
Department of Biology University of Pisa Pisa Italy
6 shared publications - Andrea Cardini
Dipartimento di Scienze Chimiche e Geologiche Università di Modena e Reggio Emilia Modena Italy
4 shared publications - F. James Rohlf
Department of Anthropology, Stony Brook University, Stony Brook, NY 11794, USA
3 shared publications - Andrej Alekseevich Evteev
Anuchin Research Institute and Museum of Anthropology Lomonosov Moscow State University Moscow Russia
2 shared publications Antonio Profico
PalaeoHub, Department of Archaeology University of York York UK
2 shared publications- Ce Liang
Department of Mechanical Engineering, University College London, London, WC1E 7JE, UK
2 shared publications
Latest Publications
- Open Access
- 7 April 2026
- Published by Wiley in The Anatomical Record
Previously undocumented regional variability in crab‐eating macaque skull sexual dimorphism and its implications for biological and morphometric studies
In a large sample of adult crab‐eating macaques, we quantified sexual dimorphism in size, shape, and covariance across the whole skull and among anatomical regions of the cranium and mandible. All regions showed significant mean sex differences, but the magnitude of size and shape dimorphism varied substantially. Shape dimorphism displayed particularly pronounced extremes of variation in specific regions. Males were consistently more variable than females. However, sex differences in size variance were significant, whereas differences in shape variance were typically nonsignificant. The chondrocranium deviated from this pattern, exhibiting an unusually large and significant difference in shape variance. Almost all regions differed significantly in shape covariance structure between sexes. To test whether these dimorphisms could be biased by the subsetting of landmarks, we compared each anatomical region with random subsets of equal dimensionality. Two regions, the vertical ramus of the mandible and the chondrocranium, emerged as unusually weakly dimorphic in both size and shape, unlike most other regions whose dimorphism was marked but within expectations from random subsets. The horizontal ramus showed the strongest shape dimorphism, but also in this case the result was not greater than found among random subsets. These analyses not only report previously undocumented regional variability in sex differences but also emphasize how between sex heteroscedasticity can be substantial. Such differences are biologically informative but suggest limitations to evolutionary comparisons by challenging common morphometric practices, such as statistical “sex‐corrections” and pooling of sexes to increase sample size, as they may lead to misleading results.
- 7 April 2026
- Published by Wiley in The Anatomical Record
Open AccessPreviously undocumented regional variability in crab‐eating macaque skull sexual dimorphism and its implications for biological and morphometric studies
In a large sample of adult crab‐eating macaques, we quantified sexual dimorphism in size, shape, and covariance across the whole skull and among anatomical regions of the cranium and mandible. All regions showed significant mean sex differences, but the magnitude of size and shape dimorphism varied substantially. Shape dimorphism displayed particularly pronounced extremes of variation in specific regions. Males were consistently more variable than females. However, sex differences in size variance were significant, whereas differences in shape variance were typically nonsignificant. The chondrocranium deviated from this pattern, exhibiting an unusually large and significant difference in shape variance. Almost all regions differed significantly in shape covariance structure between sexes. To test whether these dimorphisms could be biased by the subsetting of landmarks, we compared each anatomical region with random subsets of equal dimensionality. Two regions, the vertical ramus of the mandible and the chondrocranium, emerged as unusually weakly dimorphic in both size and shape, unlike most other regions whose dimorphism was marked but within expectations from random subsets. The horizontal ramus showed the strongest shape dimorphism, but also in this case the result was not greater than found among random subsets. These analyses not only report previously undocumented regional variability in sex differences but also emphasize how between sex heteroscedasticity can be substantial. Such differences are biologically informative but suggest limitations to evolutionary comparisons by challenging common morphometric practices, such as statistical “sex‐corrections” and pooling of sexes to increase sample size, as they may lead to misleading results.
- Open Access
- 19 June 2024
- Published by The Royal Society in Proceedings Of The Royal Society B-Biological Sciences
- Vol. 291 (2025) , 20240654
Functional adaptation of the infant craniofacial system to mechanical loadings arising from masticatory forces
The morphology and biomechanics of infant crania undergo significant changes between the pre- and post-weaning phases due to increasing loading of the masticatory system. The aims of this study were to characterize the changes in muscle forces, bite forces and the pattern of mechanical strain and stress arising from the aforementioned forces across crania in the first 48 months of life using imaging and finite element methods. A total of 51 head computed tomography scans of normal individuals were collected and analysed from a larger database of 217 individuals. The estimated mean muscle forces of temporalis, masseter and medial pterygoid increase from 30.9 to 87.0 N, 25.6 to 69.6 N and 23.1 to 58.9 N, respectively (0–48 months). Maximum bite force increases from 90.5 to 184.2 N (3–48 months). There is a change in the pattern of strain and stress from the calvaria to the face during postnatal development. Overall, this study highlights the changes in the mechanics of the craniofacial system during normal development. It further raises questions as to how and what level of changes in the mechanical forces during the development can alter the morphology of the craniofacial system.
- 19 June 2024
- Published by The Royal Society in Proceedings Of The Royal Society B-Biological Sciences
- Vol. 291 (2025) , 20240654
Open AccessFunctional adaptation of the infant craniofacial system to mechanical loadings arising from masticatory forces
The morphology and biomechanics of infant crania undergo significant changes between the pre- and post-weaning phases due to increasing loading of the masticatory system. The aims of this study were to characterize the changes in muscle forces, bite forces and the pattern of mechanical strain and stress arising from the aforementioned forces across crania in the first 48 months of life using imaging and finite element methods. A total of 51 head computed tomography scans of normal individuals were collected and analysed from a larger database of 217 individuals. The estimated mean muscle forces of temporalis, masseter and medial pterygoid increase from 30.9 to 87.0 N, 25.6 to 69.6 N and 23.1 to 58.9 N, respectively (0–48 months). Maximum bite force increases from 90.5 to 184.2 N (3–48 months). There is a change in the pattern of strain and stress from the calvaria to the face during postnatal development. Overall, this study highlights the changes in the mechanics of the craniofacial system during normal development. It further raises questions as to how and what level of changes in the mechanical forces during the development can alter the morphology of the craniofacial system.
- Open Access
A Comparison of Semilandmarking Approaches in the Analysis of Size and Shape
Often, few landmarks can be reliably identified in analyses of form variation and covariation. Thus, ‘semilandmarking’ algorithms have increasingly been applied to surfaces and curves. However, the locations of semilandmarks depend on the investigator’s choice of algorithm and their density. In consequence, to the extent that different semilandmarking approaches and densities result in different locations of semilandmarks, they can be expected to yield different results concerning patterns of variation and co-variation. The extent of such differences due to methodology is, as yet, unclear and often ignored. In this study, the performance of three landmark-driven semilandmarking approaches is assessed, using two different surface mesh datasets (ape crania and human heads) with different degrees of variation and complexity, by comparing the results of morphometric analyses. These approaches produce different semilandmark locations, which, in turn, lead to differences in statistical results, although the non-rigid semilandmarking approaches are consistent. Morphometric analyses using semilandmarks must be interpreted with due caution, recognising that error is inevitable and that results are approximations. Further work is needed to investigate the effects of using different landmark and semilandmark templates and to understand the limitations and advantages of different semilandmarking approaches.
Open AccessA Comparison of Semilandmarking Approaches in the Analysis of Size and Shape
Often, few landmarks can be reliably identified in analyses of form variation and covariation. Thus, ‘semilandmarking’ algorithms have increasingly been applied to surfaces and curves. However, the locations of semilandmarks depend on the investigator’s choice of algorithm and their density. In consequence, to the extent that different semilandmarking approaches and densities result in different locations of semilandmarks, they can be expected to yield different results concerning patterns of variation and co-variation. The extent of such differences due to methodology is, as yet, unclear and often ignored. In this study, the performance of three landmark-driven semilandmarking approaches is assessed, using two different surface mesh datasets (ape crania and human heads) with different degrees of variation and complexity, by comparing the results of morphometric analyses. These approaches produce different semilandmark locations, which, in turn, lead to differences in statistical results, although the non-rigid semilandmarking approaches are consistent. Morphometric analyses using semilandmarks must be interpreted with due caution, recognising that error is inevitable and that results are approximations. Further work is needed to investigate the effects of using different landmark and semilandmark templates and to understand the limitations and advantages of different semilandmarking approaches.
- Open Access
- 11 February 2023
- Published by Wiley in Journal of Anatomy
- Vol. 242 (6) , 1172-1183
Icex: Advances in the automatic extraction and volume calculation of cranial cavities
The use of non‐destructive approaches for digital acquisition (e.g. computerised tomography—CT) allows detailed qualitative and quantitative study of internal structures of skeletal material. Here, we present a new R‐based software tool, Icex, applicable to the study of the sizes and shapes of skeletal cavities and fossae in 3D digital images. Traditional methods of volume extraction involve the manual labelling (i.e. segmentation) of the areas of interest on each section of the image stack. This is time‐consuming, error‐prone and challenging to apply to complex cavities. Icex facilitates rapid quantification of such structures. We describe and detail its application to the isolation and calculation of volumes of various cranial cavities. The R tool is used here to automatically extract the orbital volumes, the paranasal sinuses, the nasal cavity and the upper oral volumes, based on the coordinates of 18 cranial anatomical points used to define their limits, from 3D cranial surface meshes obtained by segmenting CT scans. Icex includes an algorithm (Icv) for the calculation of volumes by defining a 3D convex hull of the extracted cavity. We demonstrate the use of Icex on an ontogenetic sample (0–19 years) of modern humans and on the fossil hominin crania Kabwe (Broken Hill) 1, Gibraltar (Forbes' Quarry) and Guattari 1. We also test the tool on three species of non‐human primates. In the modern human subsample, Icex allowed us to perform a preliminary analysis on the absolute and relative expansion of cranial sinuses and pneumatisations during growth. The performance of Icex, applied to diverse crania, shows the potential for an extensive evaluation of the developmental and/or evolutionary significance of hollow cranial structures. Furthermore, being open source, Icex is a fully customisable tool, easily applicable to other taxa and skeletal regions.
- 11 February 2023
- Published by Wiley in Journal of Anatomy
- Vol. 242 (6) , 1172-1183
Open AccessIcex: Advances in the automatic extraction and volume calculation of cranial cavities
The use of non‐destructive approaches for digital acquisition (e.g. computerised tomography—CT) allows detailed qualitative and quantitative study of internal structures of skeletal material. Here, we present a new R‐based software tool, Icex, applicable to the study of the sizes and shapes of skeletal cavities and fossae in 3D digital images. Traditional methods of volume extraction involve the manual labelling (i.e. segmentation) of the areas of interest on each section of the image stack. This is time‐consuming, error‐prone and challenging to apply to complex cavities. Icex facilitates rapid quantification of such structures. We describe and detail its application to the isolation and calculation of volumes of various cranial cavities. The R tool is used here to automatically extract the orbital volumes, the paranasal sinuses, the nasal cavity and the upper oral volumes, based on the coordinates of 18 cranial anatomical points used to define their limits, from 3D cranial surface meshes obtained by segmenting CT scans. Icex includes an algorithm (Icv) for the calculation of volumes by defining a 3D convex hull of the extracted cavity. We demonstrate the use of Icex on an ontogenetic sample (0–19 years) of modern humans and on the fossil hominin crania Kabwe (Broken Hill) 1, Gibraltar (Forbes' Quarry) and Guattari 1. We also test the tool on three species of non‐human primates. In the modern human subsample, Icex allowed us to perform a preliminary analysis on the absolute and relative expansion of cranial sinuses and pneumatisations during growth. The performance of Icex, applied to diverse crania, shows the potential for an extensive evaluation of the developmental and/or evolutionary significance of hollow cranial structures. Furthermore, being open source, Icex is a fully customisable tool, easily applicable to other taxa and skeletal regions.
- Open Access
A Comparison of Semilandmarking Approaches in the Visualisation of Shape Differences
In landmark-based analyses of size and shape variation and covariation among biological structures, regions lacking clearly identifiable homologous landmarks are commonly described by semilandmarks. Different algorithms may be used to apply semilandmarks, but little is known about the consequences of analytical results. Here, we assess how different approaches and semilandmarking densities affect the estimates and visualisations of mean and allometrically scaled surfaces. The performance of three landmark-driven semilandmarking approaches is assessed using two different surface mesh datasets with different degrees of variation and complexity: adult human head and ape cranial surfaces. Surfaces fitted to estimates of the mean and allometrically scaled landmark and semilandmark configurations arising from geometric morphometric analyses of these datasets are compared between semilandmarking approaches and different densities, as well as with those from warping to landmarks alone. We find that estimates of surface mesh shape (i.e., after re-semilandmarking and then re-warping) made with varying numbers of semilandmarks are generally consistent, while the warping of surfaces using landmarks alone yields surfaces that can be quite different to those based on semilandmarks, depending on landmark coverage and choice of template surface for warping. The extent to which these differences are important depends on the particular study context and aims.
Open AccessA Comparison of Semilandmarking Approaches in the Visualisation of Shape Differences
In landmark-based analyses of size and shape variation and covariation among biological structures, regions lacking clearly identifiable homologous landmarks are commonly described by semilandmarks. Different algorithms may be used to apply semilandmarks, but little is known about the consequences of analytical results. Here, we assess how different approaches and semilandmarking densities affect the estimates and visualisations of mean and allometrically scaled surfaces. The performance of three landmark-driven semilandmarking approaches is assessed using two different surface mesh datasets with different degrees of variation and complexity: adult human head and ape cranial surfaces. Surfaces fitted to estimates of the mean and allometrically scaled landmark and semilandmark configurations arising from geometric morphometric analyses of these datasets are compared between semilandmarking approaches and different densities, as well as with those from warping to landmarks alone. We find that estimates of surface mesh shape (i.e., after re-semilandmarking and then re-warping) made with varying numbers of semilandmarks are generally consistent, while the warping of surfaces using landmarks alone yields surfaces that can be quite different to those based on semilandmarks, depending on landmark coverage and choice of template surface for warping. The extent to which these differences are important depends on the particular study context and aims.
- Open Access
Morphometric Maps of Bilateral Asymmetry in the Human Humerus: An Implementation in the R Package Morphomap
In biological anthropology, parameters relating to cross-sectional geometry are calculated in paired long bones to evaluate the degree of lateralization of anatomy and, by inference, function. Here, we describe a novel approach, newly added to the morphomap R package, to assess the lateralization of the distribution of cortical bone along the entire diaphysis. The sample comprises paired long bones belonging to 51 individuals (10 females and 41 males) from The New Mexico Decedent Image Database with known biological profile, occupational and loading histories. Both males and females show a pattern of right lateralization. In addition, males are more lateralized than females, whereas there is not a significant association between lateralization with occupation and loading history. Body weight, height and long-bone length are the major factors driving the emergence of asymmetry in the humerus, while interestingly, the degree of lateralization decreases in the oldest individuals.
Open AccessMorphometric Maps of Bilateral Asymmetry in the Human Humerus: An Implementation in the R Package Morphomap
In biological anthropology, parameters relating to cross-sectional geometry are calculated in paired long bones to evaluate the degree of lateralization of anatomy and, by inference, function. Here, we describe a novel approach, newly added to the morphomap R package, to assess the lateralization of the distribution of cortical bone along the entire diaphysis. The sample comprises paired long bones belonging to 51 individuals (10 females and 41 males) from The New Mexico Decedent Image Database with known biological profile, occupational and loading histories. Both males and females show a pattern of right lateralization. In addition, males are more lateralized than females, whereas there is not a significant association between lateralization with occupation and loading history. Body weight, height and long-bone length are the major factors driving the emergence of asymmetry in the humerus, while interestingly, the degree of lateralization decreases in the oldest individuals.
- 20 July 2021
- Published by Wiley in The Anatomical Record
- Vol. 305 (8) , 1892-1909
The role of the nasal region in craniofacial growth: An investigation using path analysis
This study focuses on the role of the nasal region and its interactions with adjacent facial elements during early ontogeny. A series of linear measurements, areas and volumes were extracted from a collection of 227 medical CT‐scans of children from 0 to 6 years of age. These measurements describe aspects of the form of the orbit, maxilla, peri‐alveolar (subnasal) region, nasal area, eye, oral region, masseter, and temporal muscles. Hypothesized interactions were then examined using path analysis. Two paths were designed: the first to investigate potential interactions in, and relative contributions of the nasal derivatives and adjacent regions to overall facial growth and development; the second path sees the addition of facial soft tissue measurements and aims to assess their effects on skeletal components, and on overall facial growth and development. The results of the first path indicate a large contribution of the nasal and subnasal regions to facial development. This indicates that the nasal septum and the developing dentition provide an important but variable contribution to facial ontogeny during early years. This result is confirmed in the second path, where the soft tissue elements were added to the diagram. Results of the second path indicate that the soft tissues contribute only locally to the development of some skeletal elements of the face. This indicates that the contribution of skeletal components has a more direct effect on facial height than soft tissue matrices, however there are complex interactions between soft tissues and skeletal elements throughout ontogeny.
- 20 July 2021
- Published by Wiley in The Anatomical Record
- Vol. 305 (8) , 1892-1909
The role of the nasal region in craniofacial growth: An investigation using path analysis
This study focuses on the role of the nasal region and its interactions with adjacent facial elements during early ontogeny. A series of linear measurements, areas and volumes were extracted from a collection of 227 medical CT‐scans of children from 0 to 6 years of age. These measurements describe aspects of the form of the orbit, maxilla, peri‐alveolar (subnasal) region, nasal area, eye, oral region, masseter, and temporal muscles. Hypothesized interactions were then examined using path analysis. Two paths were designed: the first to investigate potential interactions in, and relative contributions of the nasal derivatives and adjacent regions to overall facial growth and development; the second path sees the addition of facial soft tissue measurements and aims to assess their effects on skeletal components, and on overall facial growth and development. The results of the first path indicate a large contribution of the nasal and subnasal regions to facial development. This indicates that the nasal septum and the developing dentition provide an important but variable contribution to facial ontogeny during early years. This result is confirmed in the second path, where the soft tissue elements were added to the diagram. Results of the second path indicate that the soft tissues contribute only locally to the development of some skeletal elements of the face. This indicates that the contribution of skeletal components has a more direct effect on facial height than soft tissue matrices, however there are complex interactions between soft tissues and skeletal elements throughout ontogeny.
- 11 January 2021
- Published by Wiley in The Anatomical Record
- Vol. 304 (8) , 1800-1810
Growing old: Do women and men age differently?
Aging of the head and especially the face has been studied intensively, yet questions remain about the timing and rates of aging throughout adulthood and about the extent to which aging differs between men and women. Here we address these issues by developing statistical models of craniofacial aging to describe and compare aging through the life course in both sexes. We selected cranial surface meshes from 254 females and 252 males, aged from 20 to 90 years from the Headspace project, Liverpool, UK. Sixteen anatomical landmarks and 59 semilandmarks on curves and surfaces were used to parameterize these. Modes and degrees of aging throughout adulthood were assessed and compared among sexes using Procrustes‐based geometric morphometric methods. Regression analyses of form through the whole age range indicate that age accounts for a small proportion of total variance in both sexes, but form is significantly related to age and males and females age in significantly different ways. Further analyses indicate that aging differs in character, timing, and rates in both sexes between early and later phases of adulthood. Sexual differences in aging are evident in the early and later phases of adulthood. The study adds to knowledge of the aging of adult craniofacial form and sexual dimorphism. It is based on a local population and so the findings are directly applicable to that population. Further studies are needed to assess generalizability and provide better data on population differences to facilitate clinical assessment and treatment planning.
- 11 January 2021
- Published by Wiley in The Anatomical Record
- Vol. 304 (8) , 1800-1810
Growing old: Do women and men age differently?
Aging of the head and especially the face has been studied intensively, yet questions remain about the timing and rates of aging throughout adulthood and about the extent to which aging differs between men and women. Here we address these issues by developing statistical models of craniofacial aging to describe and compare aging through the life course in both sexes. We selected cranial surface meshes from 254 females and 252 males, aged from 20 to 90 years from the Headspace project, Liverpool, UK. Sixteen anatomical landmarks and 59 semilandmarks on curves and surfaces were used to parameterize these. Modes and degrees of aging throughout adulthood were assessed and compared among sexes using Procrustes‐based geometric morphometric methods. Regression analyses of form through the whole age range indicate that age accounts for a small proportion of total variance in both sexes, but form is significantly related to age and males and females age in significantly different ways. Further analyses indicate that aging differs in character, timing, and rates in both sexes between early and later phases of adulthood. Sexual differences in aging are evident in the early and later phases of adulthood. The study adds to knowledge of the aging of adult craniofacial form and sexual dimorphism. It is based on a local population and so the findings are directly applicable to that population. Further studies are needed to assess generalizability and provide better data on population differences to facilitate clinical assessment and treatment planning.
- 17 December 2020
- Published by Wiley in The Anatomical Record
- Vol. 304 (9) , 1918-1926
3D Modeling of craniofacial ontogeny and sexual dimorphism in children
Background: The range of normal variation of growth and development of the craniofacial region is of direct clinical interest but incompletely understood. Here we develop a statistical model of craniofacial growth and development to compare craniofacial ontogeny between age groups and sexes and pilot an approach to modeling that is relatively straightforward to apply in the context of clinical research and assessment.Methods: The sample comprises head surface meshes captured using a 3dMD five‐camera system from 65 males and 47 females (range 3–20 years) from the Headspace project, Liverpool, UK. The surface meshes were parameterized using 16 anatomical landmarks and 59 semilandmarks on curves and surfaces. Modes and degrees of growth and development were assessed and compared among ages and sexes using Procrustes based geometric morphometric methods.Results: Regression analyses indicate that 3–10 year olds undergo greater changes than 11–20 year olds and that craniofacial growth and development differs between these age groups. The analyses indicate that males extend growth allometrically into larger size ranges, contributing substantially to adult dimorphism. Comparisons of ontogenetic trajectories between sexes find no significant differences, yet when hypermorphosis is accounted for in the older age group there is a significant residual sexual dimorphism.Conclusions: The study adds to knowledge of how adult craniofacial form and sexual dimorphism develop. It was carried out using readily available software which facilitates replication of this work in diverse populations to underpin clinical assessment of deformity and the outcomes of corrective interventions.
- 17 December 2020
- Published by Wiley in The Anatomical Record
- Vol. 304 (9) , 1918-1926
3D Modeling of craniofacial ontogeny and sexual dimorphism in children
Background: The range of normal variation of growth and development of the craniofacial region is of direct clinical interest but incompletely understood. Here we develop a statistical model of craniofacial growth and development to compare craniofacial ontogeny between age groups and sexes and pilot an approach to modeling that is relatively straightforward to apply in the context of clinical research and assessment.Methods: The sample comprises head surface meshes captured using a 3dMD five‐camera system from 65 males and 47 females (range 3–20 years) from the Headspace project, Liverpool, UK. The surface meshes were parameterized using 16 anatomical landmarks and 59 semilandmarks on curves and surfaces. Modes and degrees of growth and development were assessed and compared among ages and sexes using Procrustes based geometric morphometric methods.Results: Regression analyses indicate that 3–10 year olds undergo greater changes than 11–20 year olds and that craniofacial growth and development differs between these age groups. The analyses indicate that males extend growth allometrically into larger size ranges, contributing substantially to adult dimorphism. Comparisons of ontogenetic trajectories between sexes find no significant differences, yet when hypermorphosis is accounted for in the older age group there is a significant residual sexual dimorphism.Conclusions: The study adds to knowledge of how adult craniofacial form and sexual dimorphism develop. It was carried out using readily available software which facilitates replication of this work in diverse populations to underpin clinical assessment of deformity and the outcomes of corrective interventions.
- Open Access
- 31 August 2020
- Published by Wiley in American Journal of Physical Anthropology
- Vol. 174 (1) , 129-139
morphomap: An R package for long bone landmarking, cortical thickness, and cross‐sectional geometry mapping
Objectives: This study describes and demonstrates the functionalities and application of a new R package,morphomap, designed to extract shape information as semilandmarks in multiple sections, build cortical thickness maps, and calculate biomechanical parameters on long bones.Methods: morphomapcreates, from a single input (an oriented 3D mesh representing the long bone surface), multiple evenly spaced virtual sections.morphomapthen directly and rapidly computes morphometric and biomechanical parameters on each of these sections.The R package comprises three modules: (a) to place semilandmarks on the inner and outer outlines of each section, (b) to extract cortical thicknesses for 2D and 3D morphometric mapping, and (c) to compute cross‐sectional geometry.Results: In this article, we applymorphomapto femora fromHomo sapiensandPan troglodytesto demonstrate its utility and show its typical outputs.morphomapgreatly facilitates rapid analysis and functional interpretation of long bone form and should prove a valuable addition to the osteoarcheological analysis software toolkit.Conclusions: Long bone loading history is commonly retrodicted by calculating biomechanical parameters such as area moments of inertia, analyzing external shape and measuring cortical thickness.morphomapis a software written in the open source R environment, it integrates the main methodological approaches (geometric morphometrics, cortical morphometric maps, and cross‐sectional geometry) used to parametrize long bones.
- 31 August 2020
- Published by Wiley in American Journal of Physical Anthropology
- Vol. 174 (1) , 129-139
Open Accessmorphomap: An R package for long bone landmarking, cortical thickness, and cross‐sectional geometry mapping
Objectives: This study describes and demonstrates the functionalities and application of a new R package,morphomap, designed to extract shape information as semilandmarks in multiple sections, build cortical thickness maps, and calculate biomechanical parameters on long bones.Methods: morphomapcreates, from a single input (an oriented 3D mesh representing the long bone surface), multiple evenly spaced virtual sections.morphomapthen directly and rapidly computes morphometric and biomechanical parameters on each of these sections.The R package comprises three modules: (a) to place semilandmarks on the inner and outer outlines of each section, (b) to extract cortical thicknesses for 2D and 3D morphometric mapping, and (c) to compute cross‐sectional geometry.Results: In this article, we applymorphomapto femora fromHomo sapiensandPan troglodytesto demonstrate its utility and show its typical outputs.morphomapgreatly facilitates rapid analysis and functional interpretation of long bone form and should prove a valuable addition to the osteoarcheological analysis software toolkit.Conclusions: Long bone loading history is commonly retrodicted by calculating biomechanical parameters such as area moments of inertia, analyzing external shape and measuring cortical thickness.morphomapis a software written in the open source R environment, it integrates the main methodological approaches (geometric morphometrics, cortical morphometric maps, and cross‐sectional geometry) used to parametrize long bones.