MCMaurizio M. Chiaramonte

Maurizio M. Chiaramonte

*This is an algorithmically generated author record based on publicly available information.

Maurizio M. Chiaramonte has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Low-Rank Koopman Deformables with Log-Linear Time Integration

    by Yue Chang, Peter Yichen Chen, Eitan Grinspun, Maurizio M. Chiaramonte

    We present a low-rank Koopman operator formulation for accelerating deformable subspace simulation. Using a Dynamic Mode Decomposition (DMD) parameterization of the Koopman operator, our method learns the temporal evolution of deformable dynamics and predicts future states through efficient matrix evaluations instead of sequential time integration. This yields log-linear scaling in the number of time steps and allows large portions of the trajectory to be skipped while retaining accuracy. The resulting temporal efficiency is especially advantageous for optimization tasks such as control and initial-state estimation, where the objective often depends largely on the final configuration. To broaden the scope of Koopman-based reduced-order models in graphics, we introduce a discretization-agnostic extension that learns shared dynamic behavior across multiple shapes and mesh resolutions. Prior DMD-based approaches have been restricted to a single shape and discretization, which limits their usefulness for tasks involving geometry variation. Our formulation generalizes across both shape and discretization, which enables fast shape optimization that was previously impractical for DMD models. This expanded capability highlights the potential of Koopman operator learning as a practical tool for efficient deformable simulation and design.


  • Open Access

    Interpolated Adaptive Linear Reduced Order Modeling for Deformation Dynamics

    by Y. Tao, M. Chiaramonte, P. Fernandez

    Linear reduced‐order modeling (ROM) is widely used for efficient simulation of deformation dynamics, but its accuracy is often limited by the fixed linearization of the reduced mapping. We propose a new adaptive strategy for linear ROM that allows the reduced mapping to vary dynamically in response to the evolving deformation state, significantly improving accuracy over traditional linear approaches. To further handle large deformations, we introduce a historical displacement basis combined with Grassmann interpolation, enabling the system to recover robustly even in challenging scenarios. We evaluate our method through quantitative online‐error analysis and qualitative comparisons with principal component analysis (PCA)‐based linear ROM simulations, demonstrating substantial accuracy gains while preserving comparable computational costs.

  • Open Access

    Low-Rank Koopman Deformables with Log-Linear Time Integration

    by Yue Chang, Peter Yichen Chen, Eitan Grinspun, Maurizio M. Chiaramonte

    We present a low-rank Koopman operator formulation for accelerating deformable subspace simulation. Using a Dynamic Mode Decomposition (DMD) parameterization of the Koopman operator, our method learns the temporal evolution of deformable dynamics and predicts future states through efficient matrix evaluations instead of sequential time integration. This yields log-linear scaling in the number of time steps and allows large portions of the trajectory to be skipped while retaining accuracy. The resulting temporal efficiency is especially advantageous for optimization tasks such as control and initial-state estimation, where the objective often depends largely on the final configuration. To broaden the scope of Koopman-based reduced-order models in graphics, we introduce a discretization-agnostic extension that learns shared dynamic behavior across multiple shapes and mesh resolutions. Prior DMD-based approaches have been restricted to a single shape and discretization, which limits their usefulness for tasks involving geometry variation. Our formulation generalizes across both shape and discretization, which enables fast shape optimization that was previously impractical for DMD models. This expanded capability highlights the potential of Koopman operator learning as a practical tool for efficient deformable simulation and design.

  • Open Access

    A Nonconforming Formulation of Cloth

    by Elias Gueidon, Maurizio M. Chiaramonte


  • Open Access

    Force-Dual Modes: Subspace Design from Stochastic Forces

    by Otman Benchekroun, Eitan Grinspun, Maurizio Chiaramonte, Philip Allen Etter

    Designing subspaces for Reduced Order Modeling (ROM) is crucial for accelerating finite element simulations in graphics and engineering. Unfortunately, it's not always clear which subspace is optimal for arbitrary dynamic simulation. We propose to construct simulation subspaces from force distributions, allowing us to tailor such subspaces to common scene interactions involving constraint penalties, handles-based control, contact and musculoskeletal actuation. To achieve this we adopt a statistical perspective on Reduced Order Modelling, which allows us to push such user-designed force distributions through a linearized simulation to obtain a dual distribution on displacements. To construct our subspace, we then fit a low-rank Gaussian model to this displacement distribution, which we show generalizes Linear Modal Analysis subspaces for uncorrelated unit variance force distributions, as well as Green's Function subspaces for low rank force distributions. We show our framework allows for the construction of subspaces that are optimal both with respect to physical material properties, as well as arbitrary force distributions as observed in handle-based, contact, and musculoskeletal scene interactions.


  • Open Access

    Shape Space Spectra

    by Yue Chang, Otman Benchekroun, Maurizio M. Chiaramonte, Peter Yichen Chen, Eitan Grinspun

    Eigenanalysis of differential operators, such as the Laplace operator or elastic energy Hessian, is typically restricted to a single shape and its discretization, limiting reduced order modeling (ROM). We introduce the first eigenanalysis method for continuously parameterized shape families. Given a parametric shape, our method constructs spatial neural fields that represent eigen-functions across the entire shape space. It is agnostic to the specific shape representation, requiring only an inside/outside indicator function that depends on shape parameters. Eigenfunctions are computed by minimizing a variational principle over nested spaces with orthogonality constraints. Since eigenvalues may swap dominance at points of multiplicity, we jointly train multiple eigenfunctions while dynamically reordering them based on their eigenvalues at each step. Through causal gradient filtering , this reordering is reflected in backpropagation. Our method enables applications to operate over shape space, providing a single ROM that encapsulates vibration modes for all shapes, including previously unseen ones. Since our eigenanalysis is differentiable with respect to shape parameters, it facilitates eigenfunction-aware shape optimization. We evaluate our approach on shape optimization for sound synthesis and locomotion, as well as reduced-order modeling for elastodynamic simulation.


  • Open Access

    LiCROM: Linear-Subspace Continuous Reduced Order Modeling with Neural Fields

    by Yue Chang, Peter Yichen Chen, Zhecheng Wang, Maurizio M. Chiaramonte, Kevin Carlberg, Eitan Grinspun

    Linear reduced-order modeling (ROM) simplifies complex simulations by approximating the behavior of a system using a simplified kinematic representation. Typically, ROM is trained on input simulations created with a specific spatial discretization, and then serves to accelerate simulations with the same discretization. This discretization-dependence is restrictive. Becoming independent of a specific discretization would provide flexibility to mix and match mesh resolutions, connectivity, and type (tetrahedral, hexahedral) in training data; to accelerate simulations with novel discretizations unseen during training; and to accelerate adaptive simulations that temporally or parametrically change the discretization. We present a flexible, discretization-independent approach to reduced-order modeling. Like traditional ROM, we represent the configuration as a linear combination of displacement fields. Unlike traditional ROM, our displacement fields are continuous maps from every point on the reference domain to a corresponding displacement vector; these maps are represented as implicit neural fields. With linear continuous ROM (LiCROM), our training set can include multiple geometries undergoing multiple loading conditions, independent of their discretization. This opens the door to novel applications of reduced order modeling. We can now accelerate simulations that modify the geometry at runtime, for instance via cutting, hole punching, and even swapping the entire mesh. We can also accelerate simulations of geometries unseen during training. We demonstrate one-shot generalization, training on a single geometry and subsequently simulating various unseen geometries.


  • Open Access

    Learning Contact Deformations with General Collider Descriptors

    by Cristian Romero, Dan Casas, Maurizio Chiaramonte, Miguel A. Otaduy

    This paper presents a learning-based method for the simulation of rich contact deformations on reduced deformation models. Previous works learn deformation models for specific pairs of objects; we lift this limitation by designing a neural model that supports general rigid collider shapes. We do this by formulating a novel collider descriptor that characterizes local geometry in a region of interest. The paper shows that the learning-based deformation model can be trained on a library of colliders, but it accurately supports unseen collider shapes at runtime. We showcase our method on interactive dynamic simulations with animation of rich deformation detail, manipulation and exploration of untrained objects, and augmentation of contact information suitable for high-fidelity haptics.


  • Open Access

    Neural Stress Fields for Reduced-order Elastoplasticity and Fracture

    by Zeshun Zong, Xuan Li, Minchen Li, Maurizio M. Chiaramonte, Wojciech Matusik, Eitan Grinspun, Kevin Carlberg, Chenfanfu Jiang, Peter Yichen Chen

    We propose a hybrid neural network and physics framework for reduced-order modeling of elastoplasticity and fracture. State-of-the-art scientific computing models like the Material Point Method (MPM) faithfully simulate large-deformation elastoplasticity and fracture mechanics. However, their long runtime and large memory consumption render them unsuitable for applications constrained by computation time and memory usage, e.g., virtual reality. To overcome these barriers, we propose a reduced-order framework. Our key innovation is training a low-dimensional manifold for the Kirchhoff stress field via an implicit neural representation. This low-dimensional neural stress field (NSF) enables efficient evaluations of stress values and, correspondingly, internal forces at arbitrary spatial locations. In addition, we also train neural deformation and affine fields to build low-dimensional manifolds for the deformation and affine momentum fields. These neural stress, deformation, and affine fields share the same low-dimensional latent space, which uniquely embeds the high-dimensional simulation state. After training, we run new simulations by evolving in this single latent space, which drastically reduces the computation time and memory consumption. Our general continuum-mechanics-based reduced-order framework is applicable to any phenomena governed by the elastodynamics equation. To showcase the versatility of our framework, we simulate a wide range of material behaviors, including elastica, sand, metal, non-Newtonian fluids, fracture, contact, and collision. We demonstrate dimension reduction by up to 100,000 × and time savings by up to 10 ×.


  • Open Access

    Model reduction for the material point method via an implicit neural representation of the deformation map

    by Peter Yichen Chen, Maurizio M. Chiaramonte, Eitan Grinspun, Kevin Carlberg

    This work proposes a model-reduction approach for the material point method on nonlinear manifolds. Our technique approximates the $\textit{kinematics}$ by approximating the deformation map using an implicit neural representation that restricts deformation trajectories to reside on a low-dimensional manifold. By explicitly approximating the deformation map, its spatiotemporal gradients -- in particular the deformation gradient and the velocity -- can be computed via analytical differentiation. In contrast to typical model-reduction techniques that construct a linear or nonlinear manifold to approximate the (finite number of) degrees of freedom characterizing a given spatial discretization, the use of an implicit neural representation enables the proposed method to approximate the $\textit{continuous}$ deformation map. This allows the kinematic approximation to remain agnostic to the discretization. Consequently, the technique supports dynamic discretizations -- including resolution changes -- during the course of the online reduced-order-model simulation. To generate $\textit{dynamics}$ for the generalized coordinates, we propose a family of projection techniques. At each time step, these techniques: (1) Calculate full-space kinematics at quadrature points, (2) Calculate the full-space dynamics for a subset of `sample' material points, and (3) Calculate the reduced-space dynamics by projecting the updated full-space position and velocity onto the low-dimensional manifold and tangent space, respectively. We achieve significant computational speedup via hyper-reduction that ensures all three steps execute on only a small subset of the problem's spatial domain. Large-scale numerical examples with millions of material points illustrate the method's ability to gain an order of magnitude computational-cost saving -- indeed $\textit{real-time simulations}$ -- with negligible errors.