Raymond M. Russo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Raymond M. Russo has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Anne Meltzer
Department of Earth and Environmental Sciences Lehigh University Bethlehem PA USA
2 shared publications - David A. Foster
Department of Geological Sciences University of Florida Gainesville Florida USA
2 shared publications Diana Comte
2 shared publications- John C. VanDecar
Department of Theoretical Geophysics, University of Utrecht, PO Box 80021, 3508 TA Utrecht, The Netherlands
2 shared publications - Mark Paul Panning
Jet Propulsion Laboratory
2 shared publications Sutatcha Hongsresawat
Department of Geological Sciences University of Florida Gainesville FL USA
2 shared publications
Latest Publications
- 31 March 2026
- Published by Geological Society of America in Geosphere
- Vol. 22 (3) , 516-539
Subduction of the Woodlark spreading center, Solomon Islands: Slab window extent, and subduction of the Ontong-Java Plateau
The active spreading ridge between the Woodlark and Australia plates is currently subducting northward beneath the Solomon Islands. We determined the shape and extent of the upper mantle slab window that has developed as a result of subduction of this ridge, the Woodlark spreading center. Seafloor magnetic anomalies on the Woodlark and Australia plates, formed at the Woodlark spreading center, indicate the geometry of now-subducted conjugates of the spreading center, both spreading segments and transform faults. Our synthesis of active seismicity, marine geophysical surveys, and on-land geological studies shows that the portion of the Solomon Islands above the Woodlark spreading center subduction region currently acts as a microplate. Thus, we determined relative velocities of the three plates involved at their triple junction and then constructed the boundaries of the Woodlark slab window accordingly. To first order, the slab window extends from ∼157.0°W to at least 160.0°W and coincides with the southwestward-subducting slab of Ontong-Java Plateau lithosphere (i.e., Pacific plate) beneath the Solomon Islands block. We infer that heat advected into the slab window upper mantle by ridge subduction lowers mantle viscosity there to ∼2 × 1018 Pa⋅s, thus facilitating southwestward subduction and incipient subduction of the thick crust and lithosphere of the Ontong-Java Plateau beneath the Solomon Islands block.
- 31 March 2026
- Published by Geological Society of America in Geosphere
- Vol. 22 (3) , 516-539
Subduction of the Woodlark spreading center, Solomon Islands: Slab window extent, and subduction of the Ontong-Java Plateau
The active spreading ridge between the Woodlark and Australia plates is currently subducting northward beneath the Solomon Islands. We determined the shape and extent of the upper mantle slab window that has developed as a result of subduction of this ridge, the Woodlark spreading center. Seafloor magnetic anomalies on the Woodlark and Australia plates, formed at the Woodlark spreading center, indicate the geometry of now-subducted conjugates of the spreading center, both spreading segments and transform faults. Our synthesis of active seismicity, marine geophysical surveys, and on-land geological studies shows that the portion of the Solomon Islands above the Woodlark spreading center subduction region currently acts as a microplate. Thus, we determined relative velocities of the three plates involved at their triple junction and then constructed the boundaries of the Woodlark slab window accordingly. To first order, the slab window extends from ∼157.0°W to at least 160.0°W and coincides with the southwestward-subducting slab of Ontong-Java Plateau lithosphere (i.e., Pacific plate) beneath the Solomon Islands block. We infer that heat advected into the slab window upper mantle by ridge subduction lowers mantle viscosity there to ∼2 × 1018 Pa⋅s, thus facilitating southwestward subduction and incipient subduction of the thick crust and lithosphere of the Ontong-Java Plateau beneath the Solomon Islands block.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
The thermochemical Hawaiian plume and its dynamic influence on upper mantle discontinuities
The anomalous seismic structure of the upper mantle at the Hawaiian hotspot, including the X-discontinuity at 310 km depth and a perturbed 410, has been ascribed to large quantities (>40%) of recycled eclogite in the Hawaiian mantle plume. These estimates far exceed the classical geodynamic constraints of 15-20%, suggesting the existence of additional mechanisms driving eclogite accumulations. We tackle this discrepancy by superimposing discrete heterogeneities of recycled eclogite to a plume featuring a realistic mechanical mixture composition. This approach allows us to entrain higher amounts of denser material and quantify its segregation in the 310-410 km depth range. To reproduce the ample spectrum of buoyancy fluxes reported for the Hawaiian hotspot, we test plume radii of 80-100 km, excess plume temperatures of 200-300 K, and recycled heterogeneity fractions between 5 and 20%.Our 8 best-fit cases yield average eclogite accumulations of 19.5% at 310 km and 21-25% at 410 km, with peaks of 21-24% and 26-32%, respectively. This uniformity indicates that higher eclogite entrainments do not substantially increase material segregation in the mid-upper mantle. We demonstrate that, while the Hawaiian plume has the potential of recycling more than 18% denser material, high segregations are unsustainable over geological timescales, and excess entrainments above 20% would require unrealistic buoyancy fluxes. Our findings provide the first quantitative constraint of the dynamic relationship between the Hawaiian mantle plume and the X-discontinuity, critically advancing our understanding of the influence of recycled eclogite on mantle discontinuities.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessThe thermochemical Hawaiian plume and its dynamic influence on upper mantle discontinuities
The anomalous seismic structure of the upper mantle at the Hawaiian hotspot, including the X-discontinuity at 310 km depth and a perturbed 410, has been ascribed to large quantities (>40%) of recycled eclogite in the Hawaiian mantle plume. These estimates far exceed the classical geodynamic constraints of 15-20%, suggesting the existence of additional mechanisms driving eclogite accumulations. We tackle this discrepancy by superimposing discrete heterogeneities of recycled eclogite to a plume featuring a realistic mechanical mixture composition. This approach allows us to entrain higher amounts of denser material and quantify its segregation in the 310-410 km depth range. To reproduce the ample spectrum of buoyancy fluxes reported for the Hawaiian hotspot, we test plume radii of 80-100 km, excess plume temperatures of 200-300 K, and recycled heterogeneity fractions between 5 and 20%.Our 8 best-fit cases yield average eclogite accumulations of 19.5% at 310 km and 21-25% at 410 km, with peaks of 21-24% and 26-32%, respectively. This uniformity indicates that higher eclogite entrainments do not substantially increase material segregation in the mid-upper mantle. We demonstrate that, while the Hawaiian plume has the potential of recycling more than 18% denser material, high segregations are unsustainable over geological timescales, and excess entrainments above 20% would require unrealistic buoyancy fluxes. Our findings provide the first quantitative constraint of the dynamic relationship between the Hawaiian mantle plume and the X-discontinuity, critically advancing our understanding of the influence of recycled eclogite on mantle discontinuities.
- 15 September 2022
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 49 (18)
Mantle Flow Pattern Associated With the Patagonian Slab Window Determined From Azimuthal Anisotropy
Geological processes in Southern Patagonia are affected by the Patagonian slab window, formed by the subduction of the Chile Ridge and subsequent northward migration of the Chile Triple Junction. Using shear wave splitting analysis, we observe strong splitting of up to 2.5 s with an E‐W fast direction just south of the triple junction and the edge of the subducting Nazca slab. This region of strong anisotropy is coincident with low uppermost mantle shear velocities and an absence of mantle lithosphere, indicating that the mantle flow occurs in a warm, low‐viscosity, 200–300 km wide shallow mantle channel just to the south of the Nazca slab. The region of flow corresponds to a volcanic gap caused by depleted mantle compositions and absence of slab‐derived water. In most of Patagonia to the south of this channel, splitting fast directions trend NE‐SW consistent with large‐scale asthenospheric flow.
- 15 September 2022
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 49 (18)
Mantle Flow Pattern Associated With the Patagonian Slab Window Determined From Azimuthal Anisotropy
Geological processes in Southern Patagonia are affected by the Patagonian slab window, formed by the subduction of the Chile Ridge and subsequent northward migration of the Chile Triple Junction. Using shear wave splitting analysis, we observe strong splitting of up to 2.5 s with an E‐W fast direction just south of the triple junction and the edge of the subducting Nazca slab. This region of strong anisotropy is coincident with low uppermost mantle shear velocities and an absence of mantle lithosphere, indicating that the mantle flow occurs in a warm, low‐viscosity, 200–300 km wide shallow mantle channel just to the south of the Nazca slab. The region of flow corresponds to a volcanic gap caused by depleted mantle compositions and absence of slab‐derived water. In most of Patagonia to the south of this channel, splitting fast directions trend NE‐SW consistent with large‐scale asthenospheric flow.
- 10 April 2019
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 90 (3) , 1364-1376
The Central Mongolia Seismic Experiment: Multiple Applications of Temporary Broadband Seismic Arrays
As part of multidisciplinary research on intracontinental deformation and surface uplift, we deployed a temporary broadband seismic array in central Mongolia covering an area extending from Lake Khövsgöl in the north to the Altai Mountains in the south. A total of 112 broadband stations were deployed as three separate subarrays in two separate mobilizations. Each subarray recorded local, regional, and teleseismic earthquakes for a 21‐month period. Although the primary purpose of the array is to characterize the lithosphere and sublithospheric mantle, the array recorded a number of events of potential interest to the broader geoscience community including the Chelyabinsk meteor explosion, North Korean nuclear tests, the deep 8.3 Sea of Okhotsk earthquake, and large megathrust events offshore Chile and in Nepal. The array includes the first dense deployment of seismometers across the Hangay dome, a region previously believed to be relatively aseismic serving as a rigid block focusing strain to the west and south along the Mongolian and Gobi‐Altai. Initial results from local earthquakes recorded by the array suggest that the Hangay is deforming rather than behaving as a rigid block and that the earthquake potential of faults within the Hangay should be incorporated in hazard analysis for Mongolia.- 10 April 2019
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 90 (3) , 1364-1376
The Central Mongolia Seismic Experiment: Multiple Applications of Temporary Broadband Seismic Arrays
As part of multidisciplinary research on intracontinental deformation and surface uplift, we deployed a temporary broadband seismic array in central Mongolia covering an area extending from Lake Khövsgöl in the north to the Altai Mountains in the south. A total of 112 broadband stations were deployed as three separate subarrays in two separate mobilizations. Each subarray recorded local, regional, and teleseismic earthquakes for a 21‐month period. Although the primary purpose of the array is to characterize the lithosphere and sublithospheric mantle, the array recorded a number of events of potential interest to the broader geoscience community including the Chelyabinsk meteor explosion, North Korean nuclear tests, the deep 8.3 Sea of Okhotsk earthquake, and large megathrust events offshore Chile and in Nepal. The array includes the first dense deployment of seismometers across the Hangay dome, a region previously believed to be relatively aseismic serving as a rigid block focusing strain to the west and south along the Mongolian and Gobi‐Altai. Initial results from local earthquakes recorded by the array suggest that the Hangay is deforming rather than behaving as a rigid block and that the earthquake potential of faults within the Hangay should be incorporated in hazard analysis for Mongolia.- Open Access
- 5 February 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 124 (2) , 1601-1625
Crustal Shear Wave Velocity Structure of Central Idaho and Eastern Oregon From Ambient Seismic Noise: Results From the IDOR Project
We developed 3‐D isotropic crustal seismic velocity models of central Idaho and eastern Oregon from the IDOR (western IDaho and eastern ORegon) Passive seismic data. Ambient noise tomography yielded crustal velocity structure from vertical component Rayleigh wave group and phase velocity measurements. Results include a strong shear wave velocity contrast—faster in accreted Blue Mountains terranes west of the western Idaho shear zone (WISZ), slower in the Idaho batholith, emplaced within the Archean Grouse Creek block east of the WISZ—restricted to the upper‐to‐middle crust. In deeper crust not affected by mafic underplating during Columbia River Flood Basalt magmatism, the shear wave velocity of the Mesozoic Olds Ferry continental arc terrane is indistinguishable from that of the Archean Grouse Creek block basement. Crustal columns of the Olds Ferry terrane and the Permian‐Jurassic Wallowa intraoceanic arc terrane are characterized by low seismic velocities, consistent with felsic lithologies down to ∼20 km. West of the WISZ, the Bourne and Greenhorn subterranes of the Baker terrane, an accretionary complex between the arc terranes, have distinct shallow crustal seismic velocities. The Greenhorn subterrane to midcrustal depths is in an overthrust geometry relative to the Bourne subterrane. Lack of mafic lower crust in our results of the Wallowa or Olds Ferry arcs may be due to imbrication of upper crustal felsic plutonic complexes of these arcs. Shortening and thickening of the Blue Mountains arc terranes crust to >30 km, and subduction or delamination of their mafic lower crustal sections is a viable mechanism for growth of a felsic continental crust.
- 5 February 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 124 (2) , 1601-1625
Open AccessCrustal Shear Wave Velocity Structure of Central Idaho and Eastern Oregon From Ambient Seismic Noise: Results From the IDOR Project
We developed 3‐D isotropic crustal seismic velocity models of central Idaho and eastern Oregon from the IDOR (western IDaho and eastern ORegon) Passive seismic data. Ambient noise tomography yielded crustal velocity structure from vertical component Rayleigh wave group and phase velocity measurements. Results include a strong shear wave velocity contrast—faster in accreted Blue Mountains terranes west of the western Idaho shear zone (WISZ), slower in the Idaho batholith, emplaced within the Archean Grouse Creek block east of the WISZ—restricted to the upper‐to‐middle crust. In deeper crust not affected by mafic underplating during Columbia River Flood Basalt magmatism, the shear wave velocity of the Mesozoic Olds Ferry continental arc terrane is indistinguishable from that of the Archean Grouse Creek block basement. Crustal columns of the Olds Ferry terrane and the Permian‐Jurassic Wallowa intraoceanic arc terrane are characterized by low seismic velocities, consistent with felsic lithologies down to ∼20 km. West of the WISZ, the Bourne and Greenhorn subterranes of the Baker terrane, an accretionary complex between the arc terranes, have distinct shallow crustal seismic velocities. The Greenhorn subterrane to midcrustal depths is in an overthrust geometry relative to the Bourne subterrane. Lack of mafic lower crust in our results of the Wallowa or Olds Ferry arcs may be due to imbrication of upper crustal felsic plutonic complexes of these arcs. Shortening and thickening of the Blue Mountains arc terranes crust to >30 km, and subduction or delamination of their mafic lower crustal sections is a viable mechanism for growth of a felsic continental crust.
- Open Access
- 10 January 2019
- Published by Wiley in ESS Open Archive
Intracontinental Deformation and Crustal Structure: Hangay Dome, Central Mongolia
Mongolia has a complex tectonic history. The lithosphere was formed from multiple plate collisions in the Neoproterozoic - Early Paleozoic associated with the Central Asian Orogenic Belt. The region has since been modified by Mesozoic rifting, Cenozoic magmatism, and major strike-slip faulting along terrane boundaries and sutures. Central and Western Mongolia are part of the larger high elevation, low-relief Mongolian Plateau. To gain deeper understanding of modern deformation within the Hangay Dome in Central Mongolia, two years of teleseismic, regional, and local seismicity, recorded by a dense array of 72 temporary broadband seismic stations, was used to determine the distribution of seismicity and crustal structure. Results from receiver function analysis indicate the Hangay Dome has a crustal thickness ranging from 41-59 km. The thickest crust resides under areas of high topography and generally thins to the east. Average Vp/Vs ratios range from 1.77-1.8. We located the 7680 events detected by the array using a local 1D velocity model. Many events outline the Bulnay and Bogd faults, where historic Mw 8 earthquakes have occurred. Considerable seismicity is observed on the South Hangay – Bayan Hongor Fault System, including a Mw 4.6 earthquake. Seismicity is also observed along the Egiin Davaa and Mogod Faults. Preliminary results from a joint tomographic inversion for earthquake location and 3D velocity structure show a relatively uniform crust, where P-wave velocities in the uppermost crust range from 5.8-6 km/s. In these preliminary inversions, large portions of the region show Vp exceeds 7.0 km/s in the lower 10-15 km of the crust. The depth to the Moho is consistent with results from the receiver function analysis. Lateral velocity variations generally align with terrane boundaries and faults, such as the South Hangay - Bayan Hongor Fault System. Seismicity relocated in the inversion outline the South Hangay, Egiin Davaa, and Bulnay Faults. In addition, a cluster of seismicity locates between the Egiin Davaa and Hag Nuur faults, where no fault has previously been mapped. Seismicity in the Hangay Dome is generally confined to the upper 20 km, suggesting a rheological transition from brittle to ductile at this depth.
- 10 January 2019
- Published by Wiley in ESS Open Archive
Open AccessIntracontinental Deformation and Crustal Structure: Hangay Dome, Central Mongolia
Mongolia has a complex tectonic history. The lithosphere was formed from multiple plate collisions in the Neoproterozoic - Early Paleozoic associated with the Central Asian Orogenic Belt. The region has since been modified by Mesozoic rifting, Cenozoic magmatism, and major strike-slip faulting along terrane boundaries and sutures. Central and Western Mongolia are part of the larger high elevation, low-relief Mongolian Plateau. To gain deeper understanding of modern deformation within the Hangay Dome in Central Mongolia, two years of teleseismic, regional, and local seismicity, recorded by a dense array of 72 temporary broadband seismic stations, was used to determine the distribution of seismicity and crustal structure. Results from receiver function analysis indicate the Hangay Dome has a crustal thickness ranging from 41-59 km. The thickest crust resides under areas of high topography and generally thins to the east. Average Vp/Vs ratios range from 1.77-1.8. We located the 7680 events detected by the array using a local 1D velocity model. Many events outline the Bulnay and Bogd faults, where historic Mw 8 earthquakes have occurred. Considerable seismicity is observed on the South Hangay – Bayan Hongor Fault System, including a Mw 4.6 earthquake. Seismicity is also observed along the Egiin Davaa and Mogod Faults. Preliminary results from a joint tomographic inversion for earthquake location and 3D velocity structure show a relatively uniform crust, where P-wave velocities in the uppermost crust range from 5.8-6 km/s. In these preliminary inversions, large portions of the region show Vp exceeds 7.0 km/s in the lower 10-15 km of the crust. The depth to the Moho is consistent with results from the receiver function analysis. Lateral velocity variations generally align with terrane boundaries and faults, such as the South Hangay - Bayan Hongor Fault System. Seismicity relocated in the inversion outline the South Hangay, Egiin Davaa, and Bulnay Faults. In addition, a cluster of seismicity locates between the Egiin Davaa and Hag Nuur faults, where no fault has previously been mapped. Seismicity in the Hangay Dome is generally confined to the upper 20 km, suggesting a rheological transition from brittle to ductile at this depth.
- 23 June 2015
- Published by Geological Society of America in Geology
- Vol. 43 (8) , 667-670
USArray shear wave splitting shows seismic anisotropy from both lithosphere and asthenosphere
North America provides an important test for assessing the coupling of large continents with heterogeneous Archean- to Cenozoic-aged lithospheric provinces to the mantle flow. We use the unprecedented spatial coverage of the USArray seismic network to obtain an extensive and consistent data set of shear wave splitting intensity measurements at 1436 stations. Overall, the measurements are consistent with simple shear deformation in the asthenosphere due to viscous coupling to the overriding lithosphere. The fast directions agree with the absolute plate motion direction with a mean difference of 2° with 27° standard deviation. There are, however, deviations from this simple pattern, including a band along the Rocky Mountain front, indicative of flow complication due to gradients in lithospheric thickness, and variations in amplitude through the central United States, which can be explained through varying contributions of lithospheric anisotropy. Thus, seismic anisotropy may be sourced in both the asthenosphere and lithosphere, and variations in splitting intensity are due to lithospheric anisotropy developed during deformation over long time scales.
- 23 June 2015
- Published by Geological Society of America in Geology
- Vol. 43 (8) , 667-670
USArray shear wave splitting shows seismic anisotropy from both lithosphere and asthenosphere
North America provides an important test for assessing the coupling of large continents with heterogeneous Archean- to Cenozoic-aged lithospheric provinces to the mantle flow. We use the unprecedented spatial coverage of the USArray seismic network to obtain an extensive and consistent data set of shear wave splitting intensity measurements at 1436 stations. Overall, the measurements are consistent with simple shear deformation in the asthenosphere due to viscous coupling to the overriding lithosphere. The fast directions agree with the absolute plate motion direction with a mean difference of 2° with 27° standard deviation. There are, however, deviations from this simple pattern, including a band along the Rocky Mountain front, indicative of flow complication due to gradients in lithospheric thickness, and variations in amplitude through the central United States, which can be explained through varying contributions of lithospheric anisotropy. Thus, seismic anisotropy may be sourced in both the asthenosphere and lithosphere, and variations in splitting intensity are due to lithospheric anisotropy developed during deformation over long time scales.
- Open Access
- 12 February 2013
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 14 (4) , 851-863
Tidal modulation of continuous nonvolcanic seismic tremor in the Chile triple junction region
We located continuous seismic tremor with coherent amplitude wave trains in the Chile ridge subduction region (~46.5°S) in two clusters north and south of the Chonos Archipelago, between the Chile trench and the North Patagonian fore arc. Tremor persisted from December 2004 to February 2007 (the entire period of the Chile Ridge Subduction Project temporary seismic deployment), and lasted >17 h on six occasions. Tremor in the more active southern cluster reached a maximum duration of 48 h, and we observed no more than 3 continuous days without tremor activity. The cluster locations coincide with the surface projections of subducted transform faults formed at the Chile ridge. We also detected simultaneous, colocated low‐frequency microearthquakes with well‐defined impulsive waves within the tremor signals distributed from the surface to 40 km depth, suggesting tremors and earthquakes are part of the same process. The periodicity of tremor duration is strongly correlated with semidiurnal, diurnal, and long‐period tides, M2, N2, K1, O1, P1, and Mm (12.421 h, 12.000 h, 23.934 h, 25.819 h, 24.066 h, and 27.555 days, respectively). We found a significant correlation between tremor occurrence and Earth tides when tidal stress is calculated for the slip plane of a right‐lateral strike‐slip fault with strike N95°E, which is near parallel to subducted transform faults (N78°E) of the Chile ridge, indicating that the very small stresses resulting from the combination of ocean loading and solid Earth tides (~1 kPa) are sufficient to facilitate or suppress tremor production; tremors occur when shear stresses are maximum and wane or are low when shear stresses are minimum.
- 12 February 2013
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 14 (4) , 851-863
Open AccessTidal modulation of continuous nonvolcanic seismic tremor in the Chile triple junction region
We located continuous seismic tremor with coherent amplitude wave trains in the Chile ridge subduction region (~46.5°S) in two clusters north and south of the Chonos Archipelago, between the Chile trench and the North Patagonian fore arc. Tremor persisted from December 2004 to February 2007 (the entire period of the Chile Ridge Subduction Project temporary seismic deployment), and lasted >17 h on six occasions. Tremor in the more active southern cluster reached a maximum duration of 48 h, and we observed no more than 3 continuous days without tremor activity. The cluster locations coincide with the surface projections of subducted transform faults formed at the Chile ridge. We also detected simultaneous, colocated low‐frequency microearthquakes with well‐defined impulsive waves within the tremor signals distributed from the surface to 40 km depth, suggesting tremors and earthquakes are part of the same process. The periodicity of tremor duration is strongly correlated with semidiurnal, diurnal, and long‐period tides, M2, N2, K1, O1, P1, and Mm (12.421 h, 12.000 h, 23.934 h, 25.819 h, 24.066 h, and 27.555 days, respectively). We found a significant correlation between tremor occurrence and Earth tides when tidal stress is calculated for the slip plane of a right‐lateral strike‐slip fault with strike N95°E, which is near parallel to subducted transform faults (N78°E) of the Chile ridge, indicating that the very small stresses resulting from the combination of ocean loading and solid Earth tides (~1 kPa) are sufficient to facilitate or suppress tremor production; tremors occur when shear stresses are maximum and wane or are low when shear stresses are minimum.