Jinle Lan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jinle Lan has a total of 277 co-authors. Here are the top co-authors by number of shared publications:
Xiaoping Yang
76 shared publications- Yuan-Hua Lin
School of Materials Science and Engineering, Tsinghua University, Beijing, China
43 shared publications - Yunhua Yu
State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, North Third Ring Road 15, Chaoyang District, Beijing 100029, PR China
30 shared publications Yunhua Yu
24 shared publicationsCe-Wen Nan
State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University 1 , Beijing 100084, China
16 shared publicationsYaochun Liu
State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and Engineering Tsinghua University Beijing 100084 China
16 shared publications
Latest Publications
- 13 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Multifunctional Interphase Tailored by the Perylene Diimide/Graphene Oxide Heterojunction in Carbon Fiber/Epoxy Composites: A Route for Simultaneous Reinforcement and Dual-Mode Damage Monitoring.
Structural health monitoring (SHM) of carbon fiber-reinforced polymer (CFRP) composites requires sensing systems that are both highly sensitive and structurally compatible. Herein, a dual-mode self-sensing strategy is developed by constructing a perylene diimide/graphene oxide (PDI/GO) heterojunction-engineered interphase in carbon fiber (CF-PDI/GO)/epoxy (EP) composites through synergistic covalent bonding and π-π interactions, thereby simultaneously tailoring π-electron transfer channels and interfacial properties. Formed via π-π stacking between GO and PDI, the PDI/GO heterojunction shows a mechano-responsive fluorescence "off-on" behavior driven by efficient electron transfer via long-range electron delocalization. In contrast to CF-PDI, CF-PDI/GO exhibits quenched fluorescence alongside enhanced conductivity and chemical activity, causing enhancements of 222.9% in electrical conductivity, 82.5% in interfacial shear strength, and 123.9% in transverse fiber bundle tensile strength of CF-PDI/GO/EP composites (vs CF-desized/EP). Under mechanical stimuli, an obvious electrical resistance change is observed with fluorescence "switching-on" signals at damaged regions, which is attributed to breakage of long-range π-electron channels between CF and the PDI/GO heterojunction. Benefiting from its inherent self-sensing mechanism, electrical impedance tomography (EIT) is used for in-situ and real-time damage visualization with higher sensitivity compared to infrared thermography (IRT). This work presents a heterojunction-enabled interphase engineering strategy for simultaneously reinforcing and sensing CFRP composites, offering a pathway toward next-generation smart structural materials.
- 13 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Multifunctional Interphase Tailored by the Perylene Diimide/Graphene Oxide Heterojunction in Carbon Fiber/Epoxy Composites: A Route for Simultaneous Reinforcement and Dual-Mode Damage Monitoring.
Structural health monitoring (SHM) of carbon fiber-reinforced polymer (CFRP) composites requires sensing systems that are both highly sensitive and structurally compatible. Herein, a dual-mode self-sensing strategy is developed by constructing a perylene diimide/graphene oxide (PDI/GO) heterojunction-engineered interphase in carbon fiber (CF-PDI/GO)/epoxy (EP) composites through synergistic covalent bonding and π-π interactions, thereby simultaneously tailoring π-electron transfer channels and interfacial properties. Formed via π-π stacking between GO and PDI, the PDI/GO heterojunction shows a mechano-responsive fluorescence "off-on" behavior driven by efficient electron transfer via long-range electron delocalization. In contrast to CF-PDI, CF-PDI/GO exhibits quenched fluorescence alongside enhanced conductivity and chemical activity, causing enhancements of 222.9% in electrical conductivity, 82.5% in interfacial shear strength, and 123.9% in transverse fiber bundle tensile strength of CF-PDI/GO/EP composites (vs CF-desized/EP). Under mechanical stimuli, an obvious electrical resistance change is observed with fluorescence "switching-on" signals at damaged regions, which is attributed to breakage of long-range π-electron channels between CF and the PDI/GO heterojunction. Benefiting from its inherent self-sensing mechanism, electrical impedance tomography (EIT) is used for in-situ and real-time damage visualization with higher sensitivity compared to infrared thermography (IRT). This work presents a heterojunction-enabled interphase engineering strategy for simultaneously reinforcing and sensing CFRP composites, offering a pathway toward next-generation smart structural materials.
- 9 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (62)
Atomic‐Plane Distance as a Structural Indicator for Carrier‐Phonon Decoupling and Band Convergence in Doped BiCuSeO
Although doping is widely applied to enhance the thermoelectric performance of BiCuSeO, little attention is given to how doping‐induced lattice parameter changes affect it. These changes are primarily used to confirm successful dopant substitution. Here, Pb‐doped BiCuSeO serves as a model to reveal structural changes concealed in lattice changes and their critical role. Specifically, the weaker Coulomb interaction between Bi and Se sites induced by doping leads to changes in the Se─Cu─Se angle and Cu─Se bond length. These changes induce band convergence and reduce the bandgap. Additionally, they promote high carrier mobility, reduce phonon group velocity, and expand phonon scattering phase space, realizing carrier‐phonon decoupling. Combined with Pb 2+ substitution, which optimizes carrier concentration, activates multiple converged valence bands, and suppresses phonon transport, the ZT value increases to 1.21. Notably, the extent of bonding configuration change in (Cu 2 Se 2 ) 2− layers can be reflected by the reduced distance between the Cu and Se atomic planes, which may serve as a descriptor for advanced BiCuSeO‐based TE materials design.
- 9 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (62)
Atomic‐Plane Distance as a Structural Indicator for Carrier‐Phonon Decoupling and Band Convergence in Doped BiCuSeO
Although doping is widely applied to enhance the thermoelectric performance of BiCuSeO, little attention is given to how doping‐induced lattice parameter changes affect it. These changes are primarily used to confirm successful dopant substitution. Here, Pb‐doped BiCuSeO serves as a model to reveal structural changes concealed in lattice changes and their critical role. Specifically, the weaker Coulomb interaction between Bi and Se sites induced by doping leads to changes in the Se─Cu─Se angle and Cu─Se bond length. These changes induce band convergence and reduce the bandgap. Additionally, they promote high carrier mobility, reduce phonon group velocity, and expand phonon scattering phase space, realizing carrier‐phonon decoupling. Combined with Pb 2+ substitution, which optimizes carrier concentration, activates multiple converged valence bands, and suppresses phonon transport, the ZT value increases to 1.21. Notably, the extent of bonding configuration change in (Cu 2 Se 2 ) 2− layers can be reflected by the reduced distance between the Cu and Se atomic planes, which may serve as a descriptor for advanced BiCuSeO‐based TE materials design.
- 7 July 2026
- Published by Wiley in Small Methods
- Vol. 10 (15) , e70837
Boosting High Thermoelectric Performance of n‐type AgBiSe 2 via Rapid Synthesis Strategy
Owing to strong anharmonicity, n‐type AgBiSe 2 exhibits intrinsically ultralow lattice thermal conductivity, making it a promising thermoelectric material. However, its thermoelectric performance is constrained by poor electrical transport properties, while the time‐consuming synthesis methods further hinder the rapid validation of performance optimization strategies and scalability. In this work, a rapid synthesis strategy of self‐propagating high‐temperature synthesis was successfully adopted to prepare high‐purity AgBiSe 2 . The rapid synthesis process facilitated the formation of Se vacancies and domain structures, enabling simultaneous optimization of electrical and thermal transport properties. On the one hand, the electrical conductivity was significantly enhanced, reaching 365 S cm −1 at room temperature and 102 S cm −1 at 773 K. On the other hand, the lattice thermal conductivity reached a minimum value of 0.31 W m −1 K −1 at 773 K. Ultimately, a record‐high ZT value of 0.8 was achieved at 773 K for undoped n‐type AgBiSe 2 . Considering both the excellent thermoelectric performance and high synthesis efficiency, this rapid synthesis strategy is highly competitive and is expected to accelerate the development of AgBiSe 2 ‐based thermoelectric materials.
- 7 July 2026
- Published by Wiley in Small Methods
- Vol. 10 (15) , e70837
Boosting High Thermoelectric Performance of n‐type AgBiSe 2 via Rapid Synthesis Strategy
Owing to strong anharmonicity, n‐type AgBiSe 2 exhibits intrinsically ultralow lattice thermal conductivity, making it a promising thermoelectric material. However, its thermoelectric performance is constrained by poor electrical transport properties, while the time‐consuming synthesis methods further hinder the rapid validation of performance optimization strategies and scalability. In this work, a rapid synthesis strategy of self‐propagating high‐temperature synthesis was successfully adopted to prepare high‐purity AgBiSe 2 . The rapid synthesis process facilitated the formation of Se vacancies and domain structures, enabling simultaneous optimization of electrical and thermal transport properties. On the one hand, the electrical conductivity was significantly enhanced, reaching 365 S cm −1 at room temperature and 102 S cm −1 at 773 K. On the other hand, the lattice thermal conductivity reached a minimum value of 0.31 W m −1 K −1 at 773 K. Ultimately, a record‐high ZT value of 0.8 was achieved at 773 K for undoped n‐type AgBiSe 2 . Considering both the excellent thermoelectric performance and high synthesis efficiency, this rapid synthesis strategy is highly competitive and is expected to accelerate the development of AgBiSe 2 ‐based thermoelectric materials.
Relieving Rather Than Blocking: A Slide‐Crosslinked Polymer Electrolyte for Dendrite‐Free Lithium Metal Batteries
The development of high‐performance lithium metal batteries relies on solid polymer electrolytes (SPEs) that combine high ionic conductivity with superior interfacial stability. Conventional crosslinked SPEs often suffer from rigid networks that fail to accommodate the volume fluctuations of lithium metal during cycling. Inspired by the mechanically interlocked “molecular pulley” architecture of polyrotaxanes (PRs), we developed a slide‐crosslinked SPE (PR‐PVC) via in situ polymerization. This unique architecture facilitates dynamic stress dissipation, significantly improving interfacial adaptability and stability. Through systematic optimization of the PR molecular structure and electrolyte composition, we elucidated key structure‐property relationships and identified an optimal formulation. The resulting electrolyte exhibits exceptional ionic conductivity (2.61 mS cm −1 ), a high lithium‐ion transference number (0.89), and robust mechanical properties (3.4 GPa). When integrated into Li//LFP cells, it delivers stable cycling performance with 81.1% capacity retention after 500 cycles. This work offers a promising strategy for designing next‐generation high‐energy‐density batteries.
Relieving Rather Than Blocking: A Slide‐Crosslinked Polymer Electrolyte for Dendrite‐Free Lithium Metal Batteries
The development of high‐performance lithium metal batteries relies on solid polymer electrolytes (SPEs) that combine high ionic conductivity with superior interfacial stability. Conventional crosslinked SPEs often suffer from rigid networks that fail to accommodate the volume fluctuations of lithium metal during cycling. Inspired by the mechanically interlocked “molecular pulley” architecture of polyrotaxanes (PRs), we developed a slide‐crosslinked SPE (PR‐PVC) via in situ polymerization. This unique architecture facilitates dynamic stress dissipation, significantly improving interfacial adaptability and stability. Through systematic optimization of the PR molecular structure and electrolyte composition, we elucidated key structure‐property relationships and identified an optimal formulation. The resulting electrolyte exhibits exceptional ionic conductivity (2.61 mS cm −1 ), a high lithium‐ion transference number (0.89), and robust mechanical properties (3.4 GPa). When integrated into Li//LFP cells, it delivers stable cycling performance with 81.1% capacity retention after 500 cycles. This work offers a promising strategy for designing next‐generation high‐energy‐density batteries.
- 22 February 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (4) , e202502054
Synergistic Study of Crosslinking and Filler Effect in Composite Solid Polymer Electrolytes for High‐Performance Lithium Metal Batteries
The inherent instability of lithium metal with liquid electrolytes, as well as the performance constraints of typical solid electrolytes, has long shifted efforts to develop lithium metal batteries (LMBs). This review contends that the design approach is evolving from simply combining materials to designing multifunctional, network matrices. We critically investigate the development of cross‐linked composite solid polymer electrolytes (C‐CSPEs) as constructed platforms in which the polymer matrix is not merely a passive host rather a vital, functionally intrinsic constituent. The crosslinking with appropriate filler enables C‐CSPEs to achieve high ionic conductivity, mechanical strength, >4.5 V vs. Li/Li + electrochemical stability window (ESW), and reduce electrode/electrolyte interfacial impedance. This review thoroughly analyzed performance criteria, ionic conductivity mechanism, synthesis methods (physical and chemical blending), and crosslinking approaches (thermal curing, photo or UV curing, and radiation‐induced crosslinking) for C‐CSPEs. We highlight innovative strategies revolutionizing the field including structural battery composites (SBCs) integrating energy storage with load bearing properties, 3D printing for customizing electrolyte infrastructure, artificial intelligence (AI)‐assisted designs for optimize material performance, dynamic C‐CSPEs for self‐healing properties, and halide‐based electrolytes enabling high‐voltage stability. By combining these fundamental concepts, this review offers a strategic framework for moving C‐CSPEs from a promising research issue to the foundation of feasible high‐density LMBs.
- 22 February 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (4) , e202502054
Synergistic Study of Crosslinking and Filler Effect in Composite Solid Polymer Electrolytes for High‐Performance Lithium Metal Batteries
The inherent instability of lithium metal with liquid electrolytes, as well as the performance constraints of typical solid electrolytes, has long shifted efforts to develop lithium metal batteries (LMBs). This review contends that the design approach is evolving from simply combining materials to designing multifunctional, network matrices. We critically investigate the development of cross‐linked composite solid polymer electrolytes (C‐CSPEs) as constructed platforms in which the polymer matrix is not merely a passive host rather a vital, functionally intrinsic constituent. The crosslinking with appropriate filler enables C‐CSPEs to achieve high ionic conductivity, mechanical strength, >4.5 V vs. Li/Li + electrochemical stability window (ESW), and reduce electrode/electrolyte interfacial impedance. This review thoroughly analyzed performance criteria, ionic conductivity mechanism, synthesis methods (physical and chemical blending), and crosslinking approaches (thermal curing, photo or UV curing, and radiation‐induced crosslinking) for C‐CSPEs. We highlight innovative strategies revolutionizing the field including structural battery composites (SBCs) integrating energy storage with load bearing properties, 3D printing for customizing electrolyte infrastructure, artificial intelligence (AI)‐assisted designs for optimize material performance, dynamic C‐CSPEs for self‐healing properties, and halide‐based electrolytes enabling high‐voltage stability. By combining these fundamental concepts, this review offers a strategic framework for moving C‐CSPEs from a promising research issue to the foundation of feasible high‐density LMBs.
- Open Access
- 17 July 2025
- Published by Wiley in Advanced Science
- Vol. 12 (39) , e08598
Slide‐Crosslinked Polyrotaxane Topological Networks: Quasi‐Solid Electrolyte for High‐Voltage Lithium Metal Batteries
Although polymer‐based electrolytes offer advantages like low cost, favorable interfacial compatibility, and processability for solid‐state lithium metal batteries with high safety and high energy density, conventional linear polymer‐based electrolytes suffer from inadequate oxidation resistance and mechanical strength at operating voltages above 4.5 V, causing rapid capacity degradation and reduced battery lifespan. Inspired by the mechanical slide‐ring structure of polyrotaxanes (PR), a series of high‐voltage‐resistant sliding crosslinked quasi‐solid electrolytes (PMBA‐PPR x ) is designed and synthesized via in situ thermal polymerization of varying amounts of vinyl functional polyrotaxanes (PPRs) with N,N'‐methylenebisacrylamide (MBA). The optimal PMBA‐PPR 5 electrolyte realizes the synergistic enhancement of both mechanical properties and high‐voltage‐resistant electrochemical properties as well as the good interfacial compatibility. The dynamic slide ring structure of PPRs effectively dissipates the energy generated by lithium dendrite growth, thereby maintaining the mechanical robustness of the electrolyte during battery cycling and achieving lithium deposition/stripping behavior for more than 2000 h at 0.5 mA cm −2 . The strong polar amide groups of MBA not only improve the lithium‐ion transference number (0.69), but also enhance the high‐voltage stability of the electrolyte (∼ 5.5 V), ultimately resulting in excellent cycling stability and capacity retention of Li|PMBA‐PPR 5 |LFP and Li|PMBA‐PPR 5 |NCM811 cells. This slide‐crosslinked polyrotaxane topological dynamic structure provides a new strategy for the design of high‐voltage lithium metal electrolytes.
- 17 July 2025
- Published by Wiley in Advanced Science
- Vol. 12 (39) , e08598
Open AccessSlide‐Crosslinked Polyrotaxane Topological Networks: Quasi‐Solid Electrolyte for High‐Voltage Lithium Metal Batteries
Although polymer‐based electrolytes offer advantages like low cost, favorable interfacial compatibility, and processability for solid‐state lithium metal batteries with high safety and high energy density, conventional linear polymer‐based electrolytes suffer from inadequate oxidation resistance and mechanical strength at operating voltages above 4.5 V, causing rapid capacity degradation and reduced battery lifespan. Inspired by the mechanical slide‐ring structure of polyrotaxanes (PR), a series of high‐voltage‐resistant sliding crosslinked quasi‐solid electrolytes (PMBA‐PPR x ) is designed and synthesized via in situ thermal polymerization of varying amounts of vinyl functional polyrotaxanes (PPRs) with N,N'‐methylenebisacrylamide (MBA). The optimal PMBA‐PPR 5 electrolyte realizes the synergistic enhancement of both mechanical properties and high‐voltage‐resistant electrochemical properties as well as the good interfacial compatibility. The dynamic slide ring structure of PPRs effectively dissipates the energy generated by lithium dendrite growth, thereby maintaining the mechanical robustness of the electrolyte during battery cycling and achieving lithium deposition/stripping behavior for more than 2000 h at 0.5 mA cm −2 . The strong polar amide groups of MBA not only improve the lithium‐ion transference number (0.69), but also enhance the high‐voltage stability of the electrolyte (∼ 5.5 V), ultimately resulting in excellent cycling stability and capacity retention of Li|PMBA‐PPR 5 |LFP and Li|PMBA‐PPR 5 |NCM811 cells. This slide‐crosslinked polyrotaxane topological dynamic structure provides a new strategy for the design of high‐voltage lithium metal electrolytes.
- 2 July 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 699 (Pt 2) , 138307
Polymorphic Interface engineering for high-performance Ag2Se-based flexible thermoelectric device
- 2 July 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 699 (Pt 2) , 138307
Polymorphic Interface engineering for high-performance Ag2Se-based flexible thermoelectric device
Air Stability of Inorganic Electrolyte for All‐Solid‐State Lithium Batteries: Advances, Challenges, and Perspectives
The development of all‐solid‐state lithium batteries (ASSLBs) has emerged as a pivotal trajectory in the ongoing evolution of next‐generation battery technology, owing to their substantial energy density and inherent safety benefits. However, existing solid‐state electrolytes (SSEs) still face challenges in meeting the operational requirements of ASSLBs, primarily due to their intrinsic chemical instability under ambient atmospheric conditions. This review systematically analyzes the air instability mechanisms of three major inorganic solid‐state electrolytes (ISEs) categories: sulfide‐, oxide‐, and halide‐based ISEs. Building on this foundation, the work comprehensively discusses three strategic approaches to enhance ISE air stability: doping modification, protective layer engineering, synthesis process optimization. Notably, this review reveals cross‐system applicability of modification strategies among different ISE categories. These insights provide critical guidance for designing air‐stable ISEs. Finally, based on cutting‐edge research advancements, the review outlines future directions for holistic performance optimization of ISEs, highlighting the transformative role of AI‐driven approaches.
Air Stability of Inorganic Electrolyte for All‐Solid‐State Lithium Batteries: Advances, Challenges, and Perspectives
The development of all‐solid‐state lithium batteries (ASSLBs) has emerged as a pivotal trajectory in the ongoing evolution of next‐generation battery technology, owing to their substantial energy density and inherent safety benefits. However, existing solid‐state electrolytes (SSEs) still face challenges in meeting the operational requirements of ASSLBs, primarily due to their intrinsic chemical instability under ambient atmospheric conditions. This review systematically analyzes the air instability mechanisms of three major inorganic solid‐state electrolytes (ISEs) categories: sulfide‐, oxide‐, and halide‐based ISEs. Building on this foundation, the work comprehensively discusses three strategic approaches to enhance ISE air stability: doping modification, protective layer engineering, synthesis process optimization. Notably, this review reveals cross‐system applicability of modification strategies among different ISE categories. These insights provide critical guidance for designing air‐stable ISEs. Finally, based on cutting‐edge research advancements, the review outlines future directions for holistic performance optimization of ISEs, highlighting the transformative role of AI‐driven approaches.