Isaak D. Mayergoyz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Isaak D. Mayergoyz has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Massimiliano D'Aquino
University of Naples Federico II
7 shared publications Charles Krafft
Laboratory for Physical Sciences, College Park, MD, USA
6 shared publicationsC. Krafft
5 shared publicationsC. Serpico
Department of Electrical Engineering and IT, University of Naples Federico II, I-80125 Naples, Italy
5 shared publications- Claudio Serpico
Department of Electrical Engineering and Information Technologies University of Naples Federico II
5 shared publications G. Bertotti
Istituto Nazionale di Ricerca Metrologica, 10135 Torino, Italy
5 shared publications
Latest Publications
- Open Access
Economic Hysteresis and Its Mathematical Modeling
Hysteresis is treated as a history dependent branching, and the use of the classical Preisach model for the analysis of macroeconomic hysteresis is first discussed. Then, a new Preisach-type model is introduced as a macroeconomic aggregation of more realistic microeconomic hysteresis than in the case of the classical Preisach model. It is demonstrated that this model is endowed with a more general mechanism of branching and may account for the continuous evolution of the economy and its effect on hysteresis. Furthermore, it is shown that the sluggishness of economic recovery is an intrinsic manifestation of hysteresis branching.
Open AccessEconomic Hysteresis and Its Mathematical Modeling
Hysteresis is treated as a history dependent branching, and the use of the classical Preisach model for the analysis of macroeconomic hysteresis is first discussed. Then, a new Preisach-type model is introduced as a macroeconomic aggregation of more realistic microeconomic hysteresis than in the case of the classical Preisach model. It is demonstrated that this model is endowed with a more general mechanism of branching and may account for the continuous evolution of the economy and its effect on hysteresis. Furthermore, it is shown that the sluggishness of economic recovery is an intrinsic manifestation of hysteresis branching.
- 11 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 12 (1949307X) , 1-4
Scanning Tunneling Microscopy Detection of Surface Spin-Polarized Electron Accumulations in Topological Insulators
Spin-momentum locking in the surface mode of topological insulators leads to the surface accumulations of spin-polarized electrons caused by bias currents through topological insulator samples. It is demonstrated in this paper that surface spin-polarized electron accumulations caused by the above bias currents can be sensed by using scanning tunneling microscopy. The experimental results of this sensing are presented for tin-doped bismuth selenide samples by employing iron-coated tungsten tips as well as non-magnetic tungsten tips. A linear increase in the spin-accumulation as a function of bias current through topological insulator samples is observed.
- 11 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 12 (1949307X) , 1-4
Scanning Tunneling Microscopy Detection of Surface Spin-Polarized Electron Accumulations in Topological Insulators
Spin-momentum locking in the surface mode of topological insulators leads to the surface accumulations of spin-polarized electrons caused by bias currents through topological insulator samples. It is demonstrated in this paper that surface spin-polarized electron accumulations caused by the above bias currents can be sensed by using scanning tunneling microscopy. The experimental results of this sensing are presented for tin-doped bismuth selenide samples by employing iron-coated tungsten tips as well as non-magnetic tungsten tips. A linear increase in the spin-accumulation as a function of bias current through topological insulator samples is observed.
- Open Access
- 1 April 2020
- Published by AIP Publishing in AIP Advances
- Vol. 10 (4) , 045308
On hysteresis based random number generation
A new hysteresis-based technique for random number generation is presented which can be efficiently implemented by using modern spintronics based nano-technology. Thermal fluctuation induced random switchings of rectangular hysteresis loops are utilized whose outputs result in the generation of random binary numbers. Mathematically, the random switching is treated as a repeated sequence of two exit problems for stationary stochastic processes, which are shown to be reduced to the solution of initial boundary value problems for the appropriate backward Kolmogorov equations. Analytical solution of these boundary value problems are carried out for the stationary Gaussian Markov Ornstein-Uhlenbeck process. An alternative approach to the analysis of the random switching based on stochastic processes on graphs is also discussed with special attention paid to the trade-offs between the strength of thermal noise and the widths of the hysteresis loops.
- 1 April 2020
- Published by AIP Publishing in AIP Advances
- Vol. 10 (4) , 045308
Open AccessOn hysteresis based random number generation
A new hysteresis-based technique for random number generation is presented which can be efficiently implemented by using modern spintronics based nano-technology. Thermal fluctuation induced random switchings of rectangular hysteresis loops are utilized whose outputs result in the generation of random binary numbers. Mathematically, the random switching is treated as a repeated sequence of two exit problems for stationary stochastic processes, which are shown to be reduced to the solution of initial boundary value problems for the appropriate backward Kolmogorov equations. Analytical solution of these boundary value problems are carried out for the stationary Gaussian Markov Ornstein-Uhlenbeck process. An alternative approach to the analysis of the random switching based on stochastic processes on graphs is also discussed with special attention paid to the trade-offs between the strength of thermal noise and the widths of the hysteresis loops.
- Open Access
- 12 March 2020
- Published by EDP Sciences in Mathematical Modelling of Natural Phenomena
- Vol. 15, 20
Preisach based storage devices and global optimizers
The Preisach model of hysteresis admits simple device realizations. It is suggested in the paper that these realizations can be utilized as unique data storage devices as well as analog global optimizers.
- 12 March 2020
- Published by EDP Sciences in Mathematical Modelling of Natural Phenomena
- Vol. 15, 20
Open AccessPreisach based storage devices and global optimizers
The Preisach model of hysteresis admits simple device realizations. It is suggested in the paper that these realizations can be utilized as unique data storage devices as well as analog global optimizers.
- 28 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 11 (1949307X) , 1-4
Study of Surface Spin-Polarized Electron Accumulation in Topological Insulators Using Scanning Tunneling Microscopy
The results of scanning tunneling microscopy experiments using iron-coated tungsten tips and current-carrying bismuth selenide ( $\text{Bi}_{2}\text{Se}_{3}$ ) samples are reported. Asymmetry in tunneling currents with respect to the change in the direction of bias currents through $\text{Bi}_{2}\text{Se}_{3}$ samples has been observed. It is argued that this asymmetry is the manifestation of surface spin-polarized electron accumulation caused by the ninety-degree electron spin-momentum locking in the topologically protected surface current mode. It is demonstrated that the manifestation of surface spin-polarized electron accumulation is enhanced by tin doping of $\text{Bi}_{2}\text{Se}_{3}$ samples. Furthermore, the appearance of spin-dependent density of states in current carrying $\text{Bi}_{2}\text{Se}_{3}$ samples has also been observed.- 28 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 11 (1949307X) , 1-4
Study of Surface Spin-Polarized Electron Accumulation in Topological Insulators Using Scanning Tunneling Microscopy
The results of scanning tunneling microscopy experiments using iron-coated tungsten tips and current-carrying bismuth selenide ( $\text{Bi}_{2}\text{Se}_{3}$ ) samples are reported. Asymmetry in tunneling currents with respect to the change in the direction of bias currents through $\text{Bi}_{2}\text{Se}_{3}$ samples has been observed. It is argued that this asymmetry is the manifestation of surface spin-polarized electron accumulation caused by the ninety-degree electron spin-momentum locking in the topologically protected surface current mode. It is demonstrated that the manifestation of surface spin-polarized electron accumulation is enhanced by tin doping of $\text{Bi}_{2}\text{Se}_{3}$ samples. Furthermore, the appearance of spin-dependent density of states in current carrying $\text{Bi}_{2}\text{Se}_{3}$ samples has also been observed.- 9 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 9 (1949307X) , 1-5
Scanning Tunneling Microscopy Study of the Spin Hall Effect in Platinum and Highly Resistive Tungsten Films
The results of a nanoscale experimental study of the spin Hall effect in platinum and highly resistive tungsten films are reported. These results are obtained by using scanning tunneling microscopy based measurements with tungsten and iron-coated tungsten tips. These measurements reveal an appreciable asymmetry of tunneling currents observed by changing the polarity of tunneling voltages or the direction of electric currents through the films. This asymmetry is a manifestation of accumulations of spin-polarized electrons on conducting film boundaries occurring as a result of the spin Hall effect.
- 9 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 9 (1949307X) , 1-5
Scanning Tunneling Microscopy Study of the Spin Hall Effect in Platinum and Highly Resistive Tungsten Films
The results of a nanoscale experimental study of the spin Hall effect in platinum and highly resistive tungsten films are reported. These results are obtained by using scanning tunneling microscopy based measurements with tungsten and iron-coated tungsten tips. These measurements reveal an appreciable asymmetry of tunneling currents observed by changing the polarity of tunneling voltages or the direction of electric currents through the films. This asymmetry is a manifestation of accumulations of spin-polarized electrons on conducting film boundaries occurring as a result of the spin Hall effect.
- 28 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 55 (2) , 1-5
Transient Chaos in Nanomagnets Subject to Elliptically Polarized AC Applied Fields
Magnetization dynamics in single-domain particles driven by elliptically polarized ac external fields is studied. It is shown that such dynamics exhibits chaotic and fractal nature at a moderate power level. This is due to the phenomenon of heteroclinic tangle produced by the combined action of ac excitations and saddle-type dynamics. By using the special perturbation technique based on the Melnikov function, analytical formulas for the threshold ac excitation amplitudes necessary to create the heteroclinic tangle are derived as a function of frequency and general elliptic polarization of the applied ac field. Numerical simulations confirm that the heteroclinic tangle implies the erosion of the safe basin around stable magnetization states.
- 28 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 55 (2) , 1-5
Transient Chaos in Nanomagnets Subject to Elliptically Polarized AC Applied Fields
Magnetization dynamics in single-domain particles driven by elliptically polarized ac external fields is studied. It is shown that such dynamics exhibits chaotic and fractal nature at a moderate power level. This is due to the phenomenon of heteroclinic tangle produced by the combined action of ac excitations and saddle-type dynamics. By using the special perturbation technique based on the Melnikov function, analytical formulas for the threshold ac excitation amplitudes necessary to create the heteroclinic tangle are derived as a function of frequency and general elliptic polarization of the applied ac field. Numerical simulations confirm that the heteroclinic tangle implies the erosion of the safe basin around stable magnetization states.
- 30 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 17 (5) , 914-919
On Local Sensing of Spin Hall Effect in Tungsten Films by Using STM-Based Measurements
The spin Hall effect (SHE) in tungsten films has been experimentally studied by using STM-based measurements. These measurements have been performed by using tungsten and iron-coated tungsten tips. In the case of tungsten tips, it has been observed that the current flow through the tungsten film results in an appreciable asymmetry in the tunneling current with respect to the change in the polarity of the tunneling voltage. It is reasoned that the cause of this asymmetry is the accumulation of spin polarized electrons on the tungsten film surface due to the spin Hall effect. This asymmetry is not affected by the change of the direction of the bias current through the film. However, in the case of iron-coated tungsten tips, it has been observed that a change in the direction of the bias current does lead to an additional asymmetry in the tunneling current. It is thus experimentally demonstrated that this asymmetry is caused by the SHE and spin-dependent density of the states of the iron-coated tips.
- 30 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 17 (5) , 914-919
On Local Sensing of Spin Hall Effect in Tungsten Films by Using STM-Based Measurements
The spin Hall effect (SHE) in tungsten films has been experimentally studied by using STM-based measurements. These measurements have been performed by using tungsten and iron-coated tungsten tips. In the case of tungsten tips, it has been observed that the current flow through the tungsten film results in an appreciable asymmetry in the tunneling current with respect to the change in the polarity of the tunneling voltage. It is reasoned that the cause of this asymmetry is the accumulation of spin polarized electrons on the tungsten film surface due to the spin Hall effect. This asymmetry is not affected by the change of the direction of the bias current through the film. However, in the case of iron-coated tungsten tips, it has been observed that a change in the direction of the bias current does lead to an additional asymmetry in the tunneling current. It is thus experimentally demonstrated that this asymmetry is caused by the SHE and spin-dependent density of the states of the iron-coated tips.
- 28 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (11) , 1-5
Fabrication and Evaluation of PCB-Embedded Broadband Signal Transformers With Custom Machined Racetrack-Shaped Ferrite Cores for Ethernet Applications
To reduce manufacturing variability in broadband ferrite-core magnetic components such as Ethernet transformers, there is great industry interest in the embedding of the core materials within a planar substrate and fabricating the windings using high-precision photolithography. An embedding process has been previously developed, and found to impose design restrictions on embedded devices which can be feasibly fabricated. It was previously found that a racetrack core shape (toroidal halves joined by straight legs) allows he most efficient use of area to embed multiple magnetic devices with maximum inductance. In this research, three different sizes of racetrack shaped cores were fabricated from bulk ferrite. The racetrack cores were then embedded within printed circuit board substrate, wound as transformers, and measured to evaluate bandwidth and inductance. It was found that the transformer mutual inductance was significantly reduced through the embedding process. However, the devices were found to exhibit excellent broadband coupling behavior. Certain designs of transformers met the inductance and bandwidth requirements of 100 and 1000Base-T Ethernet.
- 28 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (11) , 1-5
Fabrication and Evaluation of PCB-Embedded Broadband Signal Transformers With Custom Machined Racetrack-Shaped Ferrite Cores for Ethernet Applications
To reduce manufacturing variability in broadband ferrite-core magnetic components such as Ethernet transformers, there is great industry interest in the embedding of the core materials within a planar substrate and fabricating the windings using high-precision photolithography. An embedding process has been previously developed, and found to impose design restrictions on embedded devices which can be feasibly fabricated. It was previously found that a racetrack core shape (toroidal halves joined by straight legs) allows he most efficient use of area to embed multiple magnetic devices with maximum inductance. In this research, three different sizes of racetrack shaped cores were fabricated from bulk ferrite. The racetrack cores were then embedded within printed circuit board substrate, wound as transformers, and measured to evaluate bandwidth and inductance. It was found that the transformer mutual inductance was significantly reduced through the embedding process. However, the devices were found to exhibit excellent broadband coupling behavior. Certain designs of transformers met the inductance and bandwidth requirements of 100 and 1000Base-T Ethernet.
- 9 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (11) , 1-5
Analytical Treatment of Nonlinear Ferromagnetic Resonance in Nanomagnets
We study magnetization oscillations in a uniformly magnetized nanomagnet driven by ac excitations (external fields and injected currents) when the frequency of excitation is close to ferromagnetic resonance frequency. By using separation of time scale and the averaging technique, we derive dynamical equations which can be studied by the methods of dynamical systems theory. This leads to an analytical description of nonlinear frequency response and to the the analysis of relevant bifurcation phenomena. The theoretical results are compared with numerical simulations.
- 9 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (11) , 1-5
Analytical Treatment of Nonlinear Ferromagnetic Resonance in Nanomagnets
We study magnetization oscillations in a uniformly magnetized nanomagnet driven by ac excitations (external fields and injected currents) when the frequency of excitation is close to ferromagnetic resonance frequency. By using separation of time scale and the averaging technique, we derive dynamical equations which can be studied by the methods of dynamical systems theory. This leads to an analytical description of nonlinear frequency response and to the the analysis of relevant bifurcation phenomena. The theoretical results are compared with numerical simulations.