Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Arantzazu Valdés has a total of 93 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dual Valorization of Encapsulated Papaya Leaf Extract and Post-Extraction Residue for Multifunctional PLA/Reprocessed PLA Films

    by Natalia Cenitagoya Alonso, Simón Faba, Marina Patricia Arrieta, Mar Cano-Caballero, Consuelo Álvarez-Herrera, Sara Maisanaba, Arantzazu Valdés García, Ana Beltrán Sanahuja

    Valorization of agro-industrial residues offers opportunities to develop active food packaging materials. This study investigated papaya leaf post-extraction residue (LW) and freeze-dried extract encapsulated in β-cyclodextrin (ELLE) as additives for virgin/reprocessed poly(lactic acid) (PLA/rPLA) films. Encapsulation was optimized using a Box–Behnken design, achieving 80% encapsulation efficiency. Five formulations were prepared by melt extrusion and compression molding with 15 wt.% acetyl tributyl citrate: a control without papaya-derived additives, 3 wt.% LW, 3 wt.% ELLE, 6 wt.% ELLE, and 3 wt.% LW combined with 3 wt.% ELLE. All additive-containing films improved UV shielding relative to the control, with the combined formulation providing the strongest protection. Films containing 3 wt.% ELLE or both additives retained mechanical properties comparable to the control, whereas 3 wt.% LW increased elongation but reduced tensile strength, and 6 wt.% ELLE reduced both parameters. ELLE-only films exhibited lower water vapor permeability than the control and significantly lower values than LW-containing films. Antioxidant activity increased in the order 3 wt.% LW < 3 wt.% ELLE < combined formulation < 6 wt.% ELLE. The latter exhibited FRAP and ABTS values of 28.0 ± 0.5 and 39.2 ± 0.6 mg Trolox equivalents 100 g−1 film, respectively, and a total phenolic content of 44.0 ± 1.5 mg gallic acid equivalents 100 g−1 film. Migration extracts from the combined formulation showed no cytotoxicity in Caco-2 or HepG2 cells under the tested conditions; however, overall migration requires further optimization. These findings support dual papaya leaf valorization for multifunctional PLA/rPLA packaging, subject to further food-contact assessment.

  • Open Access

    Towards zero-waste gastronomy: Physicochemical characterization and hedonic sensory evaluation of upcycling artichoke bract–enriched snacks

    by Rebeca López-López, Arantzazu Valdés García, Ángela Lozano Noblejas, Marta Igual, Purificación García-Segovia

  • Conceptual Integration

    by Covadonga Ordóñez García, Rosa María Torres Valdés, Enrique Moltó Mantero, Arantzazu Valdés García, Juana Jordá Guijarro

    This chapter proposes an integrative framework linking Gastronomic Intelligence (GI), the value chain, and sustainable gastronomic tourism in coastal destinations. GI is conceived as a system of data, local knowledge, and decision-making that aligns culinary culture, ecological sustainability, and economic performance. To operationalize this concept, the chapter introduces a three-tier model, consisting of biological resources, value chain, and tourist experiences, along with a set of indicators connecting ecosystem conditions with the structure and dynamics of gastronomic supply. The case of Dénia (Alicante) illustrates the framework through emblematic products (notably red shrimp), species currently in decline or absent from recent local catches (e.g., gambeta in traditional cuisine), and the sea urchin, historically present in local preparations and now the focus of recovery initiatives. The discussion examines culinary substitutions (such as the use of Huelva shrimp in traditional recipes) and governance mechanisms that may foster the sustainability and authenticity of the destination.

  • Open Access

    Ultrasound-assisted extraction, characterization, and bioactivity assessment of polyphenol-rich papaya (Carica papaya) leaf extract for application in plant-based food products

    by Natalia Cenitagoya Alonso, Mar Cano Caballero, Sara Maisanaba, Maria Llana Ruiz-Cabello, Gabriel Rives Sala, Arantzazu Valdés García, Ana Beltrán Sanahuja


  • Open Access

    Sustainable Valorization of Horchata de Chufa By-Products Through Optimized Ultrasound-Enzymatic Extraction: Recovery of Oil and Dietary Fiber

    by Arantzazu Valdés García, Jordi Castillo Sanchis, Natalia Cenitagoya Alonso, Ana Beltrán Sanahuja

    This study focuses on optimizing a single-step ultrasonic-assisted aqueous enzymatic extraction (UAE-AEE) to valorize the solid residue from Horchata de Chufa (SRH). Initial characterization of dried SRH revealed 20.6 ± 0.5% fat and 70.4 ± 0.6% carbohydrates. A Box-Behnken Design was used to develop an eco-friendly method for extracting the oil content using distilled water and cellulase, hemicellulase, and pectinase enzymes. The optimal conditions for the extraction of the oil fraction were 30 min, 8 cycles, and 0.5 g of SRH, yielding 14.56 ± 0.02%. The oily fraction (OF) and fibrous sediment phase (FF) were thoroughly characterized. UAE-AEE enhanced mass transfer, releasing oil and starch granules, as confirmed by scanning electron microscopy. Major fatty acids in the OF included oleic (60.4 ± 1.3%), palmitic (11.4 ± 0.9%), linoleic (6.5 ± 0.4%), and stearic (2.31 ± 0.15%), with a saponification value of 213 ± 7 mg KOH g−1. The main monosaccharides were glucose, manose, galactose, and fructose, with interesting content in potassium, magnesium, and calcium. The total phenolic content of the OF (213 ± 7 mg GAE 100 g−1) was higher than that of oil extracted by other methods, with notable in vitro antioxidant activity measured by CUPRAC, ABTS, FRAP, and DPPH assays. The OF demonstrated potential as a stabilizer in horchata-like beverages at 2% wt., while the FF, rich in α-cellulose and lignin, could be a valuable source of dietary fiber and prebiotics. FTIR and thermogravimetric analyses confirmed the chemical composition of the fractions. This study provides an eco-friendly method to valorize horchata by-products as rich source of oil and fiber and supports the shift toward sustainable and efficient extraction methods for food applications.


  • Open Access

    Valorization of Pineapple Core Waste for Sequential Extraction of Phenolic Compounds and Carotenoids: Optimization Through Ultrasound-Assisted Method and Box–Behnken Design

    by Ana Beltrán Sanahuja, Arantzazu Valdés García, Nieves Baenas, Belén Olga Ferrando, María Jesús Periago, Natalia Cenitagoya Alonso, Raquel Sánchez, José Luis Todolí

    In this study, a pioneering cascade method involving ultrasound-assisted extraction (UAE) and Box–Behnken Design (BBD) was optimized to valorize pineapple core waste by the sequential extraction of, firstly phenolic compounds and, secondly, carotenoids. The effectiveness of the extraction was evaluated based on total polyphenol content (TPC) and antioxidant activity using 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and ferric reducing antioxidant power (FRAP) assays. Characterization of the carotenoids was performed using high-performance liquid chromatography with a diode array detector (HPLC–DAD). The initial characterization of dry pineapple core (DPC) samples revealed their nutritional composition, including protein, lipid, and carbohydrate weight percentages of 1.20 ± 0.05%, 5.3 ± 0.4%, and 88.6 ± 0.5%, respectively. The high extractives content (40.0 ± 4.5%) suggests a substantial presence of phenolic compounds, making the pineapple core a valuable source of natural antioxidants. The optimal UAE conditions for phenolic compound extraction were 70% amplitude, 5 min extraction time, and 2 cycles, yielding an antioxidant extract rich in phenolic compounds with a desirability value of 81.2%. Therefore, DPC was considered a valuable source of natural antioxidants. The extraction of β-carotene also showed promising results with optimal UAE conditions of 20% amplitude, 3 min extraction time, and 2 cycles. This research promotes the sustainable use of pineapple waste and demonstrates the potential to obtain valuable additives for the food, pharmaceutical, and cosmetic industries, encouraging a more circular and efficient use of resources in the pineapple processing industry.


  • Open Access

    Sensory Attributes and Instrumental Chemical Parameters of Commercial Spanish Cured Ewes’ Milk Cheeses: Insights into Cheese Quality Figures

    by Ana Beltrán Sanahuja, Rafaela Pesci de Almeida, Kilian-Anja Igler Marí, Marina Cano Lamadrid, Arantzazu Valdés García, Esther Sendra Nadal

    The external appearance of some of the Protected Designation of Origin (PDO) cured cheeses is similar to other cheese samples made in Spain: 1 kg and 2.5–3 kg formats, cylindrical, and with or without a pleita mark on the surface. In this work, commercial cured ewe’s milk cheese samples with a similar external appearance were analyzed, including five PDO and five non-PDO samples. The parameters analyzed were color, texture, pH, humidity, water activity, and the volatile profile. Additionally, a descriptive and consumer-sensory analysis of the cheese samples was carried out. Statistical analysis of the results showed that luminosity, color coordinates a* and b*, percentage of deformation, humidity, water activity, and acid contents were significantly higher in non-PDO cheese samples. The breaking force, maximum force, and the content of esters were significantly higher in those cheese samples with PDO. In addition, PDO cheese samples showed higher scores for all attributes evaluated by consumers, except for color. These results suggest that PDO cheeses are placed on the market with a higher degree of ripening than non-PDO ones and that consequently they are more positively valued by consumers.


  • Open Access

    Oxidative Stability of Avocado Snacks Formulated with Olive Extract as an Active Ingredient for Novel Food Production

    by Carmen Martínez, Alfonso Jiménez, Maria Carmen Garrigós, Arantzazu Valdés

    Analysis of the oxidative stability of novel avocado chips with added natural extracts was carried out with the aim of reducing the chemical additive content in their formulation. Two different natural extracts were initially evaluated and characterized: one obtained from olive pomace (OE) and other from pomegranate seed waste. OE was selected due to its better antioxidant potential according to FRAP, ABTS, and DPPH assays as well as its higher total phenolic content. The formulations used were 0, 1.5 wt.%, and 3 wt.% of OE. A gradual disappearance of the band found around 3009 cm−1 and related to unsaturated fatty acids was observed in the control sample in contrast to formulations with added OE. The band observed near 3299 cm−1 widened and intensified with time due to the oxidation degree of samples, with this effect being higher in the control chips. The observed changes in fatty acid and hexanal content with storage time underlined the higher extent of oxidation in the control samples. This fact could suggest an antioxidant protectant action of OE in avocado chips during thermal treatment, which was attributed to the presence of phenolic compounds. The obtained chips incorporating OE represent a viable option for the development of a natural, healthy, and clean-label avocado snack at competitive cost and with low environmental impacts.


  • Open Access

    Effect of Almond Skin Waste and Glycidyl Methacrylate on Mechanical and Color Properties of Poly(ε-caprolactone)/Poly(lactic acid) Blends

    by Arantzazu Valdés, Franco Dominici, Elena Fortunati, Jose María Kenny, Alfonso Jiménez, María Carmen Garrigós

    Blending Poly(lactic acid) (PLA) and Poly(ε-caprolactone) (PCL) is a promising strategy to enhance the properties of biodegradable materials. However, these compounds are thermodynamically immiscible and, consequently, compatibilization is required during polymer blending. Reinforced biocomposites can be obtained by adding agricultural wastes generated by industries which are forced to consider waste treatment methods to prevent environmental concerns. Novel PCL/PLA blends were proposed based on the addition of 10 wt.% almond shell (AS) waste combined with 3 wt.% glycidyl methacrylate (GMA) as a compatibilizer. Different PCL-, PLA-, and PCL/PLA-based blends at different percentages (75:25, 50:50, 25:75, 15:85) added with GMA and AS were obtained. The color results highlighted the lower transparency and brownish tone of the studied formulations after the addition of AS. The addition of PCL provided a positive effect on PLA’s ductility due to its intrinsically higher flexibility. The combination of GMA and AS improved the mechanical properties of PCL, PLA, and 50:50 controls by reducing yield strength, yield strength at break, and elongation at break values. The 75:25_GMA_AS formulation showed a homogeneous visual appearance, low transparency, and desirable mechanical properties for rigid food packaging applications, reducing the final material cost through the revalorization of AS.


  • Open Access

    Microwave-assisted extraction of cellulose nanocrystals from almond (Prunus amygdalus) shell waste

    by Arantzazu Valdés, Gurutz Mondragon, María Carmen Garrigós, Arantxa Eceiza, Alfonso Jiménez

    Almond (Prunus amygdalus) is one of the most common tree nuts on a worldwide basis. This nut is highly regarded in the food and cosmetic industries. However, for all these applications, almonds are used without their shell protection, which is industrially removed contributing approximately 35-75% of the total fruit weight. This residue is normally incinerated or dumped, causing several environmental problems. In this study, a novel cellulose nanocrystal (CNCs) extraction procedure from almond shell (AS) waste by using microwave-assisted extraction was developed and compared with the conventional approach. A three-factor, three-level Box–Behnken design with five central points was used to evaluate the influence of extraction temperature, irradiation time, and NaOH concentration during the alkalization stage in crystallinity index (CI) values. A similar CI value (55.9 ± 0.7%) was obtained for the MAE process, comprising only three stages, compared with the conventional optimized procedure (55.5 ± 1.0%) with five stages. As a result, a greener and more environmentally friendly CNC extraction protocol was developed with a reduction in time, solvent, and energy consumption. Fourier transform infrared (FTIR) spectra, X-ray diffractogram (XRD), atomic force microscopy (AFM), and scanning electron microscopy (SEM) images, and thermal stability studies of samples confirmed the removal of non-cellulosic components after the chemical treatments. TEM images revealed a spherical shape of CNCs with an average size of 21 ± 6 nm, showing great potential to be used in food packaging, biological, medical, and photoelectric materials. This study successfully applied MAE for the extraction of spherical-shaped CNCs from AS with several advantages compared with the conventional procedure, reducing costs for industry.