Muhammad Naveed
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Muhammad Naveed has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Muhammad Rabnawaz
School of Packaging, Michigan State University, 448 Wilson Road, East Lansing, MI 48824, USA
8 shared publications - Ajmir Khan
School of Packaging, Michigan State University, 448 Wilson Road, East Lansing, Michigan 48824-1223, United States
3 shared publications Muhammad Jawwad Saif
Department of Applied Chemistry, Government College University Faisalabad, Faisalabad, Pakistan
3 shared publications- Muhammad Jawwad Saif
Department of Applied Chemistry, Government College University Faisalabad, 38000-Faisalabad, Pakistan
3 shared publications Ajmir Khan
School of Packaging, Michigan State University, Michigan 48824-1223, USA
2 shared publications- Fahad Khan
Department of Chemistry, Hazara University, Mansehra, Khyber Pakhtunkhwa 21300, Pakistan
2 shared publications
Latest Publications
- Open Access
Thermo-Reactively Coupled (TRC) HDPE for Melt-Processable Warp-Resistant FDM 3D Printing
Polyethylene, the most widely used and inexpensive commodity thermoplastic, remains unsuitable for 3D printing via fused deposition modeling (FDM) because of shrinkage-induced warping. Herein, this study aimed to develop a single-step reactive extrusion process to improve the filament-forming ability and 3D printability of high-density polyethylene (HDPE). HDPE was reacted with maleic anhydride, 1,10-decanediol, and a zinc acetate catalyst via peroxide-driven grafting in a melt extruder, and the subsequent coupling reactions yielded ester-containing, modified polyethylene structures. Unlike unmodified HDPE, which produced irregular filaments and poor 3D printing, the modified HDPE formulations produced filaments with a consistent diameter and enabled successful FDM printing with improved print quality. The optimized carbon-black-containing modified HDPE systems exhibited substantial mechanical improvements, with average enhancements of approximately 50–75% in tensile stress at break and an approximately 200% increase in elongation at break compared with neat HDPE. These results demonstrate that ester-containing HDPE has the potential to convert commodity HDPE into a melt-processable and mechanically improved feedstock for additive manufacturing applications. This study suggests that widely available post-consumer pigmented HDPE, which is otherwise unsuitable for reuse in packaging, could potentially be explored for 3D printing as an alternative to expensive acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA).
Open AccessThermo-Reactively Coupled (TRC) HDPE for Melt-Processable Warp-Resistant FDM 3D Printing
Polyethylene, the most widely used and inexpensive commodity thermoplastic, remains unsuitable for 3D printing via fused deposition modeling (FDM) because of shrinkage-induced warping. Herein, this study aimed to develop a single-step reactive extrusion process to improve the filament-forming ability and 3D printability of high-density polyethylene (HDPE). HDPE was reacted with maleic anhydride, 1,10-decanediol, and a zinc acetate catalyst via peroxide-driven grafting in a melt extruder, and the subsequent coupling reactions yielded ester-containing, modified polyethylene structures. Unlike unmodified HDPE, which produced irregular filaments and poor 3D printing, the modified HDPE formulations produced filaments with a consistent diameter and enabled successful FDM printing with improved print quality. The optimized carbon-black-containing modified HDPE systems exhibited substantial mechanical improvements, with average enhancements of approximately 50–75% in tensile stress at break and an approximately 200% increase in elongation at break compared with neat HDPE. These results demonstrate that ester-containing HDPE has the potential to convert commodity HDPE into a melt-processable and mechanically improved feedstock for additive manufacturing applications. This study suggests that widely available post-consumer pigmented HDPE, which is otherwise unsuitable for reuse in packaging, could potentially be explored for 3D printing as an alternative to expensive acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA).
- Open Access
Halloysite Nanotubes Reinforced Epoxy/Epoxy Acrylate Blends: Unlocking the Potential of Hybrid Nanocomposites
Unlocking the potential of polymer blends requires innovative strategies that transcend simple mixing. This study presents a novel approach by creating hybrid blends of epoxy and structurally compatible in situ synthesized epoxy acrylate (vinyl ester) resins, further reinforced with halloysite nanotubes (HNTs). We went beyond simple blending by synthesizing the epoxy acrylate (EA) component from the base epoxy resin, ensuring molecular-level compatibility. The epoxy acrylate was successfully synthesized via a ring-opening reaction, as confirmed by FTIR and 1H-NMR. A series of blends at varying weight ratios of epoxy/epoxy acrylate (75/25, 50/50, and 25/75) was prepared and optimized using dynamic mechanical analysis (DMA) for the best viscoelastic performance and subsequently reinforced with 2 wt% HNTs. Our findings reveal that this unique approach fosters highly interpenetrated polymer networks (IPNs), as evidenced by thermal and viscoelastic behavior. The hybrid epoxy nanocomposite with a 75/25 blend ratio exhibits a superior balance of properties, demonstrating a synergistic enhancement in both thermal and thermomechanical properties compared to the neat epoxy and epoxy acrylate networks. The optimized hybrid epoxy composite exhibits a 147% increase in storage modulus (E′) and a 180% increase in loss modulus (E″) over the neat epoxy composite while enhancing thermal stability. This study not only presents HNT-reinforced epoxy/epoxy acrylate as a new family of robust hybrid nanocomposites but also provides a fundamental blueprint for compatibilizing and reinforcing thermoset blends for advanced applications.
Open AccessHalloysite Nanotubes Reinforced Epoxy/Epoxy Acrylate Blends: Unlocking the Potential of Hybrid Nanocomposites
Unlocking the potential of polymer blends requires innovative strategies that transcend simple mixing. This study presents a novel approach by creating hybrid blends of epoxy and structurally compatible in situ synthesized epoxy acrylate (vinyl ester) resins, further reinforced with halloysite nanotubes (HNTs). We went beyond simple blending by synthesizing the epoxy acrylate (EA) component from the base epoxy resin, ensuring molecular-level compatibility. The epoxy acrylate was successfully synthesized via a ring-opening reaction, as confirmed by FTIR and 1H-NMR. A series of blends at varying weight ratios of epoxy/epoxy acrylate (75/25, 50/50, and 25/75) was prepared and optimized using dynamic mechanical analysis (DMA) for the best viscoelastic performance and subsequently reinforced with 2 wt% HNTs. Our findings reveal that this unique approach fosters highly interpenetrated polymer networks (IPNs), as evidenced by thermal and viscoelastic behavior. The hybrid epoxy nanocomposite with a 75/25 blend ratio exhibits a superior balance of properties, demonstrating a synergistic enhancement in both thermal and thermomechanical properties compared to the neat epoxy and epoxy acrylate networks. The optimized hybrid epoxy composite exhibits a 147% increase in storage modulus (E′) and a 180% increase in loss modulus (E″) over the neat epoxy composite while enhancing thermal stability. This study not only presents HNT-reinforced epoxy/epoxy acrylate as a new family of robust hybrid nanocomposites but also provides a fundamental blueprint for compatibilizing and reinforcing thermoset blends for advanced applications.
- Open Access
Synthesis of Water-Dispersible Poly(dimethylsiloxane) and Its Potential Application in the Paper Coating Industry as an Alternative for PFAS-Coated Paper and Single-Use Plastics
Polyethylene-, polyvinylidene chloride-, and per- and polyfluoroalkyl substance-coated paper generate microplastics or fluorochemicals in the environment. Here, we report an approach for the development of oil-resistant papers using an environmentally friendly, fluorine-free, water-dispersible poly(dimethylsiloxane) (PDMS) coating on kraft paper. Carboxylic-functionalized PDMS (PDMS-COOH) was synthesized and subsequently neutralized with ammonium bicarbonate to obtain a waterborne emulsion, which was then coated onto kraft paper. The water resistance of the coated paper was determined via Cobb60 measurements. The Cobb60 value was reduced to 2.70 ± 0.14 g/m2 as compared to 87.6 ± 5.1 g/m2 for uncoated paper, suggesting a remarkable improvement in water resistance. Similarly, oil resistance was found to be 12/12 on the kit test scale versus 0/12 for uncoated paper. In addition, the coated paper retained 70–90% of its inherent mechanical properties, and more importantly, the coated paper was recycled via pulp recovery using a standard protocol with a 91.1% yield.
Open AccessSynthesis of Water-Dispersible Poly(dimethylsiloxane) and Its Potential Application in the Paper Coating Industry as an Alternative for PFAS-Coated Paper and Single-Use Plastics
Polyethylene-, polyvinylidene chloride-, and per- and polyfluoroalkyl substance-coated paper generate microplastics or fluorochemicals in the environment. Here, we report an approach for the development of oil-resistant papers using an environmentally friendly, fluorine-free, water-dispersible poly(dimethylsiloxane) (PDMS) coating on kraft paper. Carboxylic-functionalized PDMS (PDMS-COOH) was synthesized and subsequently neutralized with ammonium bicarbonate to obtain a waterborne emulsion, which was then coated onto kraft paper. The water resistance of the coated paper was determined via Cobb60 measurements. The Cobb60 value was reduced to 2.70 ± 0.14 g/m2 as compared to 87.6 ± 5.1 g/m2 for uncoated paper, suggesting a remarkable improvement in water resistance. Similarly, oil resistance was found to be 12/12 on the kit test scale versus 0/12 for uncoated paper. In addition, the coated paper retained 70–90% of its inherent mechanical properties, and more importantly, the coated paper was recycled via pulp recovery using a standard protocol with a 91.1% yield.
- Open Access
- 16 February 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (7) , 3968-3978
Food-safe glycidyl-free chain extenders for polylactides
Glycidyl-based chain extenders are broadly used as processing aids to enhance the physical properties of polyesters, but glycidyl-containing compounds have severe toxicity concerns.
- 16 February 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (7) , 3968-3978
Open AccessFood-safe glycidyl-free chain extenders for polylactides
Glycidyl-based chain extenders are broadly used as processing aids to enhance the physical properties of polyesters, but glycidyl-containing compounds have severe toxicity concerns.
- 3 April 2023
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 293
Green synthesis of antimony sulphide (Sb2S3) nano-rods in plant oils and study of photocatalytic activity
- 3 April 2023
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 293
Green synthesis of antimony sulphide (Sb2S3) nano-rods in plant oils and study of photocatalytic activity
- Open Access
Polystyrene-Sepiolite Clay Nanocomposites with Enhanced Mechanical and Thermal Properties
Polystyrene (PS)/sepiolite clay nanocomposites were prepared via the melt extrusion technique using vinyl tri-ethoxy silane (VTES) as the compatibilizer and cross-linking agent. Mechanical, thermal, and flame-retardant properties of the newly developed polystyrene-based nanocomposites were determined. Surface morphology was investigated using scanning electron microscopy (SEM), examining the distribution of the filler in various compositions of fabricated composites. Structural analysis of the samples was carried out using the Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques. Thermal stability was determined by thermal gravimetric analysis (TGA), showing a maximum 30.2 wt.% increase in residue by adding sepiolite clay. The results obtained from the dynamic mechanical analyzer (DMA) in terms of the storage modulus, loss modulus and damping factor exhibited better stress transfer rate and effective interfacial adhesion between the filler and the matrix. The higher filler loaded sample showed greater flame retardancy by decreasing the burning rate up to 48%.
Open AccessPolystyrene-Sepiolite Clay Nanocomposites with Enhanced Mechanical and Thermal Properties
Polystyrene (PS)/sepiolite clay nanocomposites were prepared via the melt extrusion technique using vinyl tri-ethoxy silane (VTES) as the compatibilizer and cross-linking agent. Mechanical, thermal, and flame-retardant properties of the newly developed polystyrene-based nanocomposites were determined. Surface morphology was investigated using scanning electron microscopy (SEM), examining the distribution of the filler in various compositions of fabricated composites. Structural analysis of the samples was carried out using the Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques. Thermal stability was determined by thermal gravimetric analysis (TGA), showing a maximum 30.2 wt.% increase in residue by adding sepiolite clay. The results obtained from the dynamic mechanical analyzer (DMA) in terms of the storage modulus, loss modulus and damping factor exhibited better stress transfer rate and effective interfacial adhesion between the filler and the matrix. The higher filler loaded sample showed greater flame retardancy by decreasing the burning rate up to 48%.
- 24 October 2021
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 31 (2) , 247-259
Effect of pristine halloysite nanotubes on dynamic mechanical and thermal behavior of reinforced epoxy nanocomposites
- 24 October 2021
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 31 (2) , 247-259
Effect of pristine halloysite nanotubes on dynamic mechanical and thermal behavior of reinforced epoxy nanocomposites
- 1 October 2021
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 600, 174-186
Are telechelic polysiloxanes better than hemi-telechelic for self-cleaning applications?
- 1 October 2021
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 600, 174-186
Are telechelic polysiloxanes better than hemi-telechelic for self-cleaning applications?
- 10 June 2021
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 23 (13) , 4771-4779
Melt-reprocessing of mixed polyurethane thermosets
Herein we have developed melt-reprocessing of mixed aromatic and aliphatic polyurethanes (PUR) thermosets. This study will enable post-consumer mixed PURs with immense benefits for science, the economy, and the environment.
- 10 June 2021
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 23 (13) , 4771-4779
Melt-reprocessing of mixed polyurethane thermosets
Herein we have developed melt-reprocessing of mixed aromatic and aliphatic polyurethanes (PUR) thermosets. This study will enable post-consumer mixed PURs with immense benefits for science, the economy, and the environment.