Eduardo Rodríguez-Sandoval
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Eduardo Rodríguez-Sandoval has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
- Guillermo Antonio Correa Londoño
Universidad Nacional de Colombia
9 shared publications - Misael Cortés Rodríguez
Departamento Ingeniería Agrícola y Alimentos, Facultad Ciencias Agrarias, Universidad Nacional de Colombia sede Medellín, Medellín 050012, Colombia
7 shared publications - Katherine Manjarres-Pinzon
Corporación Universitaria Lasallista
6 shared publications - Alejandro Mejia-Villota
Alimentos y Productos en Polvo Poltec S.A.S, Medellín, Antioquia, Colombia
5 shared publications - Edith Marleny Cadena-Chamorro
Facultad de Ciencias Agrarias, Universidad Nacional de Colombia, Medellín, Colombia
5 shared publications - José Uriel Sepúlveda Valencia
Facultad de Ciencias Agrarias, Universidad Nacional de Colombia, Sede Medellín, Colombia
5 shared publications
Latest Publications
- Open Access
- 13 August 2026
- Published by Springer Nature in Plant Foods for Human Nutrition
- Vol. 81 (3) , 109
Partial Fat Substitution in Butter Cookies Using Thermochemically Modified Unripe Plantain (Musa paradisiaca AAB) Flour Treated with Fumaric Acid
This study evaluated thermochemically modified unripe plantain flour treated with fumaric acid as a fat substitute in butter cookies. Incorporating this modified flour with a 24.73% fat reduction increased sensory acceptability by 65% compared with native unripe plantain flour. Fat reduction caused changes in mass loss during baking and porous structure while maintaining stable ash and protein contents and a higher proportion of nondigestible carbohydrates. Enzymatic hydrolysis analysis confirmed higher resistant starch content and lower proportions of rapidly and slowly digestible starch than in the control cookies. Thermochemically modified unripe plantain flour treated with fumaric acid proved to be a promising alternative for developing reduced-fat butter cookies by improving sensory acceptability, textural properties (increased crispness), and functional potential through reduced product digestibility. Reduced-fat cookies exhibited greater firmness and crispness but also greater browning intensity.
- 13 August 2026
- Published by Springer Nature in Plant Foods for Human Nutrition
- Vol. 81 (3) , 109
Open AccessPartial Fat Substitution in Butter Cookies Using Thermochemically Modified Unripe Plantain (Musa paradisiaca AAB) Flour Treated with Fumaric Acid
This study evaluated thermochemically modified unripe plantain flour treated with fumaric acid as a fat substitute in butter cookies. Incorporating this modified flour with a 24.73% fat reduction increased sensory acceptability by 65% compared with native unripe plantain flour. Fat reduction caused changes in mass loss during baking and porous structure while maintaining stable ash and protein contents and a higher proportion of nondigestible carbohydrates. Enzymatic hydrolysis analysis confirmed higher resistant starch content and lower proportions of rapidly and slowly digestible starch than in the control cookies. Thermochemically modified unripe plantain flour treated with fumaric acid proved to be a promising alternative for developing reduced-fat butter cookies by improving sensory acceptability, textural properties (increased crispness), and functional potential through reduced product digestibility. Reduced-fat cookies exhibited greater firmness and crispness but also greater browning intensity.
- 15 July 2026
- Published by Wiley in Journal of the Science of Food and Agriculture
- Vol. 106 (14) , 8846-8857
Thermochemical modification of unripe plantain flour with fumaric acid: structure and functionality
BACKGROUND: Unripe plantain flour is naturally rich in resistant starch and of interest for developing foods with a reduced glycemic response but exhibits limited processing stability. Thermochemical modification using organic acids represents a promising strategy to alter starch structure, improve functional properties and stabilize resistant starch fractions. This study evaluated the techno‐functional, physicochemical, structural, and digestibility properties of unripe plantain flour treated with fumaric acid. RESULTS: The treatment induced dual structural modifications, as evidenced by Fourier transform infrared spectroscopy and X‐ray diffraction analyses, involving partial hydrolysis of glycosidic bonds and esterification of starch hydroxyl groups. These molecular changes led to a marked reduction in peak viscosity (approximately 90% compared to the native flour) and swelling power, as well as to a substantial increase in resistant starch content, reaching 86.74%. The modified flour also exhibited increased water solubility, reduced water‐holding capacity and increased yellow coloration. CONCLUSION: Overall, thermochemical modification with fumaric acid effectively altered the structural and functional properties of unripe plantain flour. This treatment resulted in an ingredient with greater rheological stability and a higher resistant starch content than its native counterpart. Technologically, the modified flour exhibited a notable reduction in retrogradation‐induced syneresis and gelation capacity, at the same time as retaining its oil absorption capacity. These characteristics support its potential application in food formulations requiring low viscosity (reduced thickening capacity) and a mitigated glycemic impact. Finally, it is recommended to optimize processing conditions to mitigate browning and adapt its functionality to specific food matrices. © 2026 Society of Chemical Industry.
- 15 July 2026
- Published by Wiley in Journal of the Science of Food and Agriculture
- Vol. 106 (14) , 8846-8857
Thermochemical modification of unripe plantain flour with fumaric acid: structure and functionality
BACKGROUND: Unripe plantain flour is naturally rich in resistant starch and of interest for developing foods with a reduced glycemic response but exhibits limited processing stability. Thermochemical modification using organic acids represents a promising strategy to alter starch structure, improve functional properties and stabilize resistant starch fractions. This study evaluated the techno‐functional, physicochemical, structural, and digestibility properties of unripe plantain flour treated with fumaric acid. RESULTS: The treatment induced dual structural modifications, as evidenced by Fourier transform infrared spectroscopy and X‐ray diffraction analyses, involving partial hydrolysis of glycosidic bonds and esterification of starch hydroxyl groups. These molecular changes led to a marked reduction in peak viscosity (approximately 90% compared to the native flour) and swelling power, as well as to a substantial increase in resistant starch content, reaching 86.74%. The modified flour also exhibited increased water solubility, reduced water‐holding capacity and increased yellow coloration. CONCLUSION: Overall, thermochemical modification with fumaric acid effectively altered the structural and functional properties of unripe plantain flour. This treatment resulted in an ingredient with greater rheological stability and a higher resistant starch content than its native counterpart. Technologically, the modified flour exhibited a notable reduction in retrogradation‐induced syneresis and gelation capacity, at the same time as retaining its oil absorption capacity. These characteristics support its potential application in food formulations requiring low viscosity (reduced thickening capacity) and a mitigated glycemic impact. Finally, it is recommended to optimize processing conditions to mitigate browning and adapt its functionality to specific food matrices. © 2026 Society of Chemical Industry.
- Open Access
- 15 May 2026
- Published by Universidad del Valle in INGENIERÍA Y COMPETITIVIDAD
- Vol. 28 (2)
Influencia de las enzimas y los emulsificantes utilizados como mejoradores de pan en la textura del pan molde
Introduction: Bread improvers based on emulsifiers and enzymes are widely used to enhance dough performance and delay staling; however, their synergistic effects on texture stability during storage are not yet fully understood.Objective: To evaluate the effect of different combinations of emulsifiers and enzyme systems on dough properties, bread quality, and texture stability during storage.Methodology: Six formulations combining Distilled Monoglycerides (DMG90), Sodium Stearoyl Lactylate (SSL), Diacetyl Tartaric Acid Esters of Mono- and Diglycerides (DATEM), soy lecithin, and two enzyme systems were evaluated and compared with a commercial bread improver. Dough properties were analyzed using farinograph parameters, while bread quality was assessed through physicochemical measurements, color analysis, texture profile analysis, and firmness during storage.Results: The DMG90–SSL–maltogenic α-amylase formulation showed the best performance, with greater dough stability and development time, as well as lower crumb hardness and firmness. No significant differences were observed in moisture content or specific volume. During storage, this formulation exhibited lower firmness than the commercial improver, highlighting a synergistic effect between emulsifiers and enzymes.Conclusions: The DMG90–SSL–maltogenic α-amylase system represents a technologically viable alternative to commercial bread improvers, improving dough performance and preserving bread softness during storage.
- 15 May 2026
- Published by Universidad del Valle in INGENIERÍA Y COMPETITIVIDAD
- Vol. 28 (2)
Open AccessInfluencia de las enzimas y los emulsificantes utilizados como mejoradores de pan en la textura del pan molde
Introduction: Bread improvers based on emulsifiers and enzymes are widely used to enhance dough performance and delay staling; however, their synergistic effects on texture stability during storage are not yet fully understood.Objective: To evaluate the effect of different combinations of emulsifiers and enzyme systems on dough properties, bread quality, and texture stability during storage.Methodology: Six formulations combining Distilled Monoglycerides (DMG90), Sodium Stearoyl Lactylate (SSL), Diacetyl Tartaric Acid Esters of Mono- and Diglycerides (DATEM), soy lecithin, and two enzyme systems were evaluated and compared with a commercial bread improver. Dough properties were analyzed using farinograph parameters, while bread quality was assessed through physicochemical measurements, color analysis, texture profile analysis, and firmness during storage.Results: The DMG90–SSL–maltogenic α-amylase formulation showed the best performance, with greater dough stability and development time, as well as lower crumb hardness and firmness. No significant differences were observed in moisture content or specific volume. During storage, this formulation exhibited lower firmness than the commercial improver, highlighting a synergistic effect between emulsifiers and enzymes.Conclusions: The DMG90–SSL–maltogenic α-amylase system represents a technologically viable alternative to commercial bread improvers, improving dough performance and preserving bread softness during storage.
- 23 April 2026
- Published by Wiley in Starch - Stärke
- Vol. 78 (4) , e70213
Effect of Heat Treatment on the Properties of Plantain Flour Modified With Fumaric Acid
This study investigated the effect of thermochemical modification on unripe plantain ( Musa paradisiaca AAB ) flour, using 10% w/w fumaric acid to optimize its physicochemical and techno‐functional properties for food applications. A central composite experimental design was applied to evaluate how temperature (120°C to 140°C) and time (120 to 240 min) affected key characteristics, including the degree of substitution, amylose content, relative crystallinity, and pasting properties. Results demonstrated that both variables (temperature and time) significantly influenced the outcome. The degree of substitution reached its maximum value (1.23) at the highest temperature tested and 180 min. Solubility and thermal stability increased, while swelling capacity, peak viscosity, and retrogradation decreased under high‐thermal‐intensity treatments. Optimal conditions (140.9°C, 216.4 min) were established by maximizing the degree of substitution and minimizing peak viscosity, breakdown, and setbacks. These findings demonstrate that thermochemical modification with 10% w/w fumaric acid is an effective strategy to adapt the functionality of plantain flour, offering a sustainable approach to add value in the development of novel food products.
- 23 April 2026
- Published by Wiley in Starch - Stärke
- Vol. 78 (4) , e70213
Effect of Heat Treatment on the Properties of Plantain Flour Modified With Fumaric Acid
This study investigated the effect of thermochemical modification on unripe plantain ( Musa paradisiaca AAB ) flour, using 10% w/w fumaric acid to optimize its physicochemical and techno‐functional properties for food applications. A central composite experimental design was applied to evaluate how temperature (120°C to 140°C) and time (120 to 240 min) affected key characteristics, including the degree of substitution, amylose content, relative crystallinity, and pasting properties. Results demonstrated that both variables (temperature and time) significantly influenced the outcome. The degree of substitution reached its maximum value (1.23) at the highest temperature tested and 180 min. Solubility and thermal stability increased, while swelling capacity, peak viscosity, and retrogradation decreased under high‐thermal‐intensity treatments. Optimal conditions (140.9°C, 216.4 min) were established by maximizing the degree of substitution and minimizing peak viscosity, breakdown, and setbacks. These findings demonstrate that thermochemical modification with 10% w/w fumaric acid is an effective strategy to adapt the functionality of plantain flour, offering a sustainable approach to add value in the development of novel food products.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Food Technology
- Vol. 29
Effect of fermentation time and partial wheat flour substitution with oat or corn flour on the quality characteristics of crackers
Developing healthy, high-consumption products, such as crackers, is fundamental to innovation in the food industry; however, changing process conditions or ingredients can decrease their quality. The objective of this study was to evaluate the effect of wheat-oat or wheat-corn flours and different dough fermentation times on the quality properties of crackers, and to compare the results with those of two reference products: a control product made with 100% wheat flour and a commercial product. Thus, pH, water activity (aw), texture, moisture content, porosity, color, and specific volume were measured, and a triangular sensory test was performed. Additionally, the desirability index of treatments was determined by considering their similarity to the commercial reference. Crackers prepared with wheat–oat and wheat–corn flour blends showed no significant differences in fracturability compared with the control sample (p > 0.05). However, the cracker made with corn flour and a fermentation time of 16 h was the most similar to the commercial reference sample according to the desirability index. In the sensory evaluation, the triangle test showed that participants were less able to distinguish the wheat–corn cracker fermented for 16 h from the control sample compared with the wheat–oat cracker fermented for 16 h. The greater discrimination of the oat-containing cracker was likely associated with its firmer texture. From an industrial perspective, evaluated formulations demonstrate the potential to develop differentiated crackers that add value. These crackers support the valorization of cereal by-products and contribute to more sustainable food processing strategies.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Food Technology
- Vol. 29
Open AccessEffect of fermentation time and partial wheat flour substitution with oat or corn flour on the quality characteristics of crackers
Developing healthy, high-consumption products, such as crackers, is fundamental to innovation in the food industry; however, changing process conditions or ingredients can decrease their quality. The objective of this study was to evaluate the effect of wheat-oat or wheat-corn flours and different dough fermentation times on the quality properties of crackers, and to compare the results with those of two reference products: a control product made with 100% wheat flour and a commercial product. Thus, pH, water activity (aw), texture, moisture content, porosity, color, and specific volume were measured, and a triangular sensory test was performed. Additionally, the desirability index of treatments was determined by considering their similarity to the commercial reference. Crackers prepared with wheat–oat and wheat–corn flour blends showed no significant differences in fracturability compared with the control sample (p > 0.05). However, the cracker made with corn flour and a fermentation time of 16 h was the most similar to the commercial reference sample according to the desirability index. In the sensory evaluation, the triangle test showed that participants were less able to distinguish the wheat–corn cracker fermented for 16 h from the control sample compared with the wheat–oat cracker fermented for 16 h. The greater discrimination of the oat-containing cracker was likely associated with its firmer texture. From an industrial perspective, evaluated formulations demonstrate the potential to develop differentiated crackers that add value. These crackers support the valorization of cereal by-products and contribute to more sustainable food processing strategies.
- Open Access
- 29 December 2025
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 61 (1)
The effects of extrusion on the techno-functional, physicochemical, pasting and microstructural properties of green banana flour
Extrusion offers a promising approach to enhance the value of green banana flour (GBF), namely via the use of rejected bananas in the agro-industrial chain. This study evaluated the effects of extrusion conditions (feed moisture: 30%–50%; screw speed: 100–300 rpm) on the techno-functional, rheological, and microstructural properties of GBF. The results revealed significant structural modifications, including reduced starch crystallinity (from 51.30% in native flour to 32.49%–44.44% in extruded flours) and the formation of amorphous complexes. Microscopy revealed disrupted granular integrity, with extruded flours exhibiting irregular shapes and loss of birefringence. The pasting profiles indicated lower viscosities in the extruded flours, suggesting modifications in starch behaviour. Additionally, the extruded flours exhibited enhanced flowability and bulk density, making them more suitable for industrial applications. Colorimetric shifts towards darker hues were attributed to Maillard reactions. Further research should explore the nutritional and sensory impacts in the end-product formulations.
- 29 December 2025
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 61 (1)
Open AccessThe effects of extrusion on the techno-functional, physicochemical, pasting and microstructural properties of green banana flour
Extrusion offers a promising approach to enhance the value of green banana flour (GBF), namely via the use of rejected bananas in the agro-industrial chain. This study evaluated the effects of extrusion conditions (feed moisture: 30%–50%; screw speed: 100–300 rpm) on the techno-functional, rheological, and microstructural properties of GBF. The results revealed significant structural modifications, including reduced starch crystallinity (from 51.30% in native flour to 32.49%–44.44% in extruded flours) and the formation of amorphous complexes. Microscopy revealed disrupted granular integrity, with extruded flours exhibiting irregular shapes and loss of birefringence. The pasting profiles indicated lower viscosities in the extruded flours, suggesting modifications in starch behaviour. Additionally, the extruded flours exhibited enhanced flowability and bulk density, making them more suitable for industrial applications. Colorimetric shifts towards darker hues were attributed to Maillard reactions. Further research should explore the nutritional and sensory impacts in the end-product formulations.
- Open Access
- 1 May 2025
- Published by Universidad Nacional de Colombia in Revista Facultad Nacional de Agronomía Medellín
- Vol. 78 (2) , 11089-11102
Characterization of rejected green banana flour: morphological, structural, and techno-functional properties
Green banana flour (GBF) stands out as a promising raw material for agribusiness due to its techno-functional and nutritional properties. In this study, the characterization of flour obtained from rejected green bananas (Musa acuminata AAA, cv. Cavendish) produced in the department of Magdalena, Colombia, located north of the country on the Caribbean coast, was made. Physicochemical, proximate, morphological, structural, and techno-functional parameters were evaluated, as well as their thermal properties and pasting parameters. GBF had a high ash content (2.89%) and a low-fat content (0.6%), which contributes to a high mineral content and flour stability, respectively. The BET mathematical model showed the best fit to describe water absorption in GBF. X-ray diffraction analysis showed a combination of type A and B starch crystallinity. Raman spectroscopy analyses identified characteristic bands, functional groups and molecular interactions related to starch, amylose, and amylopectin (476, 941, and 2,914 cm-1) in the flour. GBF had a pasting temperature around 79.58 °C, good resistance to shear stress at high temperature, and a high tendency to retrogradation. The GBF gelatinization had an enthalpy value of 12.97 J g-1, while the retrogradation enthalpy was 8.19 J g-1. The thermal and pasting values support the starch tendency in GBF to retrograde; this is an attractive property to use GBF as a functional ingredient. This study established the potential of GBF as a promising solution to reduce post-harvest losses of rejected green bananas.
- 1 May 2025
- Published by Universidad Nacional de Colombia in Revista Facultad Nacional de Agronomía Medellín
- Vol. 78 (2) , 11089-11102
Open AccessCharacterization of rejected green banana flour: morphological, structural, and techno-functional properties
Green banana flour (GBF) stands out as a promising raw material for agribusiness due to its techno-functional and nutritional properties. In this study, the characterization of flour obtained from rejected green bananas (Musa acuminata AAA, cv. Cavendish) produced in the department of Magdalena, Colombia, located north of the country on the Caribbean coast, was made. Physicochemical, proximate, morphological, structural, and techno-functional parameters were evaluated, as well as their thermal properties and pasting parameters. GBF had a high ash content (2.89%) and a low-fat content (0.6%), which contributes to a high mineral content and flour stability, respectively. The BET mathematical model showed the best fit to describe water absorption in GBF. X-ray diffraction analysis showed a combination of type A and B starch crystallinity. Raman spectroscopy analyses identified characteristic bands, functional groups and molecular interactions related to starch, amylose, and amylopectin (476, 941, and 2,914 cm-1) in the flour. GBF had a pasting temperature around 79.58 °C, good resistance to shear stress at high temperature, and a high tendency to retrogradation. The GBF gelatinization had an enthalpy value of 12.97 J g-1, while the retrogradation enthalpy was 8.19 J g-1. The thermal and pasting values support the starch tendency in GBF to retrograde; this is an attractive property to use GBF as a functional ingredient. This study established the potential of GBF as a promising solution to reduce post-harvest losses of rejected green bananas.
- Open Access
- 1 January 2025
- Published by Universidad Nacional de Colombia in Agronomía Colombiana
- Vol. 43 (1) , e117878
Challenges and strategies to promote the industrialization of cassava crop in Colombia
Cassava (yuca) is a major crop in Colombia, with a production of more than 2.5 million t in an estimated area of more than 260,000 ha. However, the average yield in the country is 11.34 t ha-1, a low level compared to other world-class producing countries. About 94.4% of the total production of cassava nationwide is used for direct human consumption, and only 5.6% is destined for industrialization. The aim of this research was to verify the problems faced by the industrialization of cassava crops in Colombia and to establish possible strategies to help deal with them. The strategies proposed were identified through field observations, iterative testing, stakeholder feedback, and comparative analysis. Among the most noticeable challenges in the low industrialization of cassava crops are low availability of land and high-quality planting material, low technological development, and seasonality of production. Some outstanding strategies to overcome this problem are sowing by pre-sale, access to suitable technology, change of crop varieties, and the producer’s business culture. Large industrialized crops are adopting pre-sale planting as a business strategy for agribusiness; moreover, a crop with agricultural mechanization and irrigation systems on large tracts of land is economically efficient. However, the shift from subsistence agriculture to agribusiness is not enough. Government support with public policies and subsidies is needed to safeguard the cassava production chain in times of national or global crisis.
- 1 January 2025
- Published by Universidad Nacional de Colombia in Agronomía Colombiana
- Vol. 43 (1) , e117878
Open AccessChallenges and strategies to promote the industrialization of cassava crop in Colombia
Cassava (yuca) is a major crop in Colombia, with a production of more than 2.5 million t in an estimated area of more than 260,000 ha. However, the average yield in the country is 11.34 t ha-1, a low level compared to other world-class producing countries. About 94.4% of the total production of cassava nationwide is used for direct human consumption, and only 5.6% is destined for industrialization. The aim of this research was to verify the problems faced by the industrialization of cassava crops in Colombia and to establish possible strategies to help deal with them. The strategies proposed were identified through field observations, iterative testing, stakeholder feedback, and comparative analysis. Among the most noticeable challenges in the low industrialization of cassava crops are low availability of land and high-quality planting material, low technological development, and seasonality of production. Some outstanding strategies to overcome this problem are sowing by pre-sale, access to suitable technology, change of crop varieties, and the producer’s business culture. Large industrialized crops are adopting pre-sale planting as a business strategy for agribusiness; moreover, a crop with agricultural mechanization and irrigation systems on large tracts of land is economically efficient. However, the shift from subsistence agriculture to agribusiness is not enough. Government support with public policies and subsidies is needed to safeguard the cassava production chain in times of national or global crisis.
- Open Access
- 13 September 2024
- Published by Universidad del Cauca in Biotecnología en el Sector Agropecuario y Agroindustrial
- Vol. 23 (1)
Proceso de extrusión de harina de banano verde: Propiedades antioxidantes y estructurales
Una de las alternativas viables para aprovechar el banano verde de rechazo que no cumple con los parámetros de calidad para ser exportado, consiste en transformarlo en harina, sin embargo, es necesario evaluar los cambios en las propiedades fisicoquímicas, antioxidantes y estructurales porque estos resultados son insumos importantes para dar soporte a posibles aplicaciones de cada harina en diferentes productos alimenticios. El objetivo de este estudio fue evaluar el efecto del secado por aire caliente y el proceso de extrusión sobre las propiedades fisicoquímicas, estructurales y actividad antioxidante del banano verde de rechazo. Para ello, se determinó el pH, acidez titulable, actividad del agua, contenido de humedad, fenoles totales y la actividad antioxidante usando ABTS, DPPH y ORAC tanto de la pulpa, como de la harina obtenida mediante deshidratación con aire caliente (HBVD) y por extrusión (HBVE). En cuanto a la estructura, se determinaron HBVD y HBVE mediante espectroscopía FTIR y Raman. No se encontró diferencia significativa en los valores medios de pH y acidez entre la pulpa y las harinas de banano verde (HBVD y HBVE). Además, los resultados de ABTS, DPPH y ORAC fueron mayores para la pulpa, mientras la muestra HBVE tuvo mayor contenido de fenoles totales. Las harinas HBVD y HBVE presentaron valore similares de ORAC, aunque la HBVE tuvo mayores valores de ABTS y DPPH comparado con la HBVD. Adicionalmente, los espectros FTIR y Raman evidenciaron un cambio estructural en la muestra HBVE con respecto a la del tratamiento HBVD, debido principalmente a la temperatura y el esfuerzo cortante aplicado en el proceso de extrusión.
- 13 September 2024
- Published by Universidad del Cauca in Biotecnología en el Sector Agropecuario y Agroindustrial
- Vol. 23 (1)
Open AccessProceso de extrusión de harina de banano verde: Propiedades antioxidantes y estructurales
Una de las alternativas viables para aprovechar el banano verde de rechazo que no cumple con los parámetros de calidad para ser exportado, consiste en transformarlo en harina, sin embargo, es necesario evaluar los cambios en las propiedades fisicoquímicas, antioxidantes y estructurales porque estos resultados son insumos importantes para dar soporte a posibles aplicaciones de cada harina en diferentes productos alimenticios. El objetivo de este estudio fue evaluar el efecto del secado por aire caliente y el proceso de extrusión sobre las propiedades fisicoquímicas, estructurales y actividad antioxidante del banano verde de rechazo. Para ello, se determinó el pH, acidez titulable, actividad del agua, contenido de humedad, fenoles totales y la actividad antioxidante usando ABTS, DPPH y ORAC tanto de la pulpa, como de la harina obtenida mediante deshidratación con aire caliente (HBVD) y por extrusión (HBVE). En cuanto a la estructura, se determinaron HBVD y HBVE mediante espectroscopía FTIR y Raman. No se encontró diferencia significativa en los valores medios de pH y acidez entre la pulpa y las harinas de banano verde (HBVD y HBVE). Además, los resultados de ABTS, DPPH y ORAC fueron mayores para la pulpa, mientras la muestra HBVE tuvo mayor contenido de fenoles totales. Las harinas HBVD y HBVE presentaron valore similares de ORAC, aunque la HBVE tuvo mayores valores de ABTS y DPPH comparado con la HBVD. Adicionalmente, los espectros FTIR y Raman evidenciaron un cambio estructural en la muestra HBVE con respecto a la del tratamiento HBVD, debido principalmente a la temperatura y el esfuerzo cortante aplicado en el proceso de extrusión.
- Open Access
- 1 September 2024
- Published by Universidad Nacional de Colombia in Revista Facultad Nacional de Agronomía Medellín
- Vol. 77 (3) , 10839-10852
Enzymatic biocatalysis processes on the semicrystalline and morphological order of native cassava starches (Manihot esculenta)
Enzymatic biocatalysis has emerged as a green technology in starch modification with divergent results at the morphological level depending on the origin of the starch source. Therefore, various enzymatic biocatalysts were implemented to evaluate their effect on the morphological and semi-crystalline characteristics of native cassava starches. The degree of affinity of the biocatalysts and the conversion rate on native cassava starches were determined by kinetic parameters such as the Michaelis-Menten constant, whose results revealed the following order of affinity from highest to lowest: α-amylase, amyloglucosidase, pullulanase, and β-amylase. In addition, greater biocatalytic activity of α-amylase and β-amylase was evidenced on the amorphous zones of the polymer associated with the decrease in the amylose content and a significant increase in the degree of relative crystallinity. According to morphological analyses and XDR, the action of amyloglucosidase promoted exo-erosion phenomena and the appearance of lacerations on the granular surface of starch with the consequent decrease in the semicrystalline order. The pullulanase caused slightly eroded fragmented granules with greater biocatalytic activity on the crystalline lamellae, associated with a significant increase in the apparent amylose content. FTIR analysis in the 1,200-900 cm-1 region, corresponding to the starch fingerprint, allowed us to detect notable changes in the degree of molecular order after the enzymatic attack; this result was consistent with the degree of relative crystallinity estimated by X-ray diffraction. Likewise, the results allowed us to notice significant changes in the semi-crystalline order and morphological characteristics during the modification with α-amylase (AAM) and amyloglucosidase (AMG) associated with their greater affinity and preferential action on the amorphous structures located on the granular surface of native cassava starch.
- 1 September 2024
- Published by Universidad Nacional de Colombia in Revista Facultad Nacional de Agronomía Medellín
- Vol. 77 (3) , 10839-10852
Open AccessEnzymatic biocatalysis processes on the semicrystalline and morphological order of native cassava starches (Manihot esculenta)
Enzymatic biocatalysis has emerged as a green technology in starch modification with divergent results at the morphological level depending on the origin of the starch source. Therefore, various enzymatic biocatalysts were implemented to evaluate their effect on the morphological and semi-crystalline characteristics of native cassava starches. The degree of affinity of the biocatalysts and the conversion rate on native cassava starches were determined by kinetic parameters such as the Michaelis-Menten constant, whose results revealed the following order of affinity from highest to lowest: α-amylase, amyloglucosidase, pullulanase, and β-amylase. In addition, greater biocatalytic activity of α-amylase and β-amylase was evidenced on the amorphous zones of the polymer associated with the decrease in the amylose content and a significant increase in the degree of relative crystallinity. According to morphological analyses and XDR, the action of amyloglucosidase promoted exo-erosion phenomena and the appearance of lacerations on the granular surface of starch with the consequent decrease in the semicrystalline order. The pullulanase caused slightly eroded fragmented granules with greater biocatalytic activity on the crystalline lamellae, associated with a significant increase in the apparent amylose content. FTIR analysis in the 1,200-900 cm-1 region, corresponding to the starch fingerprint, allowed us to detect notable changes in the degree of molecular order after the enzymatic attack; this result was consistent with the degree of relative crystallinity estimated by X-ray diffraction. Likewise, the results allowed us to notice significant changes in the semi-crystalline order and morphological characteristics during the modification with α-amylase (AAM) and amyloglucosidase (AMG) associated with their greater affinity and preferential action on the amorphous structures located on the granular surface of native cassava starch.