Luís Antonio Guimarães Bitencourt
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luís Antonio Guimarães Bitencourt has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Osvaldo Luis Manzoli
São Paulo State University, Brazil
17 shared publications - Antonio Domingues de Figueiredo
Universidade de São Paulo, Brasil
9 shared publications - Eduardo Alexandre Rodrigues
University of Campinas, Brazil
6 shared publications Eduardo A. Rodrigues
5 shared publicationsTúlio N. Bittencourt
5 shared publications- Ramoel Serafini
Universidade São Judas Tadeu, Brasil
4 shared publications
Latest Publications
- Open Access
- 11 October 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Mechanical performance of normal and high-strength concretes reinforced with surface-treated fibers
- 11 October 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessMechanical performance of normal and high-strength concretes reinforced with surface-treated fibers
- Open Access
- 3 October 2026
- Published by Elsevier in SSRN Electronic Journal
A Matrix-Free Interior Point Method Implementation for Plastic Limit Analysis of Truss Lattices
This work proposes a memory-efficient strategy for plastic limit analysis, combining Linear Programming (LP) with a matrix-free implementation based on lattice models. Plastic limit analysis provides rigorous bounds for structural capacity; however, when formulated as LP, the explicit assembly of global matrices leads to prohibitive memory allocation demands as mesh sizes increase, even if in a sparse format. To overcome this limitation, a novel solver was developed based on the primal-dual interior-point method coupled with a block-diagonal preconditioner. This matrix-free approach eliminates the need to store the KKT system by executing algebraic operations directly on the mesh topology, which drastically reduces memory consumption. The numerical model incorporates a strict geometric calibration of the bar capacities, ensuring that the discrete lattice reproduces the continuous material behavior. Numerical experiments conducted on benchmark biphasic configurations and on a real nodular cast iron microstructure (via micro-CT) demonstrate that the proposed approach yields results equivalent to those of traditional sparse matrix formulations. Additionally, recent simulations involving the interaction of rigid symmetric hooks under different matrix strength ratios (0.1, 0.5, and 0.9) highlight the solver's capability to capture, with high fidelity, the transition from singular collapse bands to complex and diffuse failure topologies around re-entrant corners.
- 3 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Matrix-Free Interior Point Method Implementation for Plastic Limit Analysis of Truss Lattices
This work proposes a memory-efficient strategy for plastic limit analysis, combining Linear Programming (LP) with a matrix-free implementation based on lattice models. Plastic limit analysis provides rigorous bounds for structural capacity; however, when formulated as LP, the explicit assembly of global matrices leads to prohibitive memory allocation demands as mesh sizes increase, even if in a sparse format. To overcome this limitation, a novel solver was developed based on the primal-dual interior-point method coupled with a block-diagonal preconditioner. This matrix-free approach eliminates the need to store the KKT system by executing algebraic operations directly on the mesh topology, which drastically reduces memory consumption. The numerical model incorporates a strict geometric calibration of the bar capacities, ensuring that the discrete lattice reproduces the continuous material behavior. Numerical experiments conducted on benchmark biphasic configurations and on a real nodular cast iron microstructure (via micro-CT) demonstrate that the proposed approach yields results equivalent to those of traditional sparse matrix formulations. Additionally, recent simulations involving the interaction of rigid symmetric hooks under different matrix strength ratios (0.1, 0.5, and 0.9) highlight the solver's capability to capture, with high fidelity, the transition from singular collapse bands to complex and diffuse failure topologies around re-entrant corners.
- Open Access
- 30 May 2026
- Published by Elsevier in Structures
- Vol. 89
Ultra-high-performance concrete in structural dematerialisation: Performance, life-cycle impacts and practical limits
- 30 May 2026
- Published by Elsevier in Structures
- Vol. 89
Open AccessUltra-high-performance concrete in structural dematerialisation: Performance, life-cycle impacts and practical limits
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 19 (2)
Experimental investigation and code-based assessment of the shear behavior of steel fiber-reinforced concrete beams with recycled aggregates
This paper investigates the shear behavior of steel fiber-reinforced concrete (SFRC) beams made of conventional concrete (CC) with natural aggregate and with 50% replacement using coarse recycled aggregate concrete (RAC). The experimental program comprised 12 simply-supported beams without transverse reinforcement, with depths of 300, 400, and 500 mm, tested under four-point bending and designed to failure in shear. For each beam height, two nominally identical beams were tested, considering both conventional and recycled aggregates. The material characterization showed that both mixtures met the performance requirements of ABNT NBR 16940:2021. Although the RAC mixture exhibited a greater dispersion of results during the characterization tests, the beam’s load-bearing capacity was not affected. Experimental tests confirmed that the RAC beams achieved ultimate shear capacities comparable to or higher than those of the CC beams for all depths investigated. Moreover, the beams became increasingly fragile with increasing height. The experimental shear strengths were compared with the predictions from the SFRC shear model recommended in ABNT NBR 16935:2021. For both concretes, code-based shear resistances accounted for only about 30-45% of the mean experimental capacities, indicating markedly conservative estimates. The results demonstrate that partial replacement of natural coarse aggregates with recycled aggregates does not affect the shear performance of SFRC beams and can be safely combined for sustainable structural applications.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 19 (2)
Open AccessExperimental investigation and code-based assessment of the shear behavior of steel fiber-reinforced concrete beams with recycled aggregates
This paper investigates the shear behavior of steel fiber-reinforced concrete (SFRC) beams made of conventional concrete (CC) with natural aggregate and with 50% replacement using coarse recycled aggregate concrete (RAC). The experimental program comprised 12 simply-supported beams without transverse reinforcement, with depths of 300, 400, and 500 mm, tested under four-point bending and designed to failure in shear. For each beam height, two nominally identical beams were tested, considering both conventional and recycled aggregates. The material characterization showed that both mixtures met the performance requirements of ABNT NBR 16940:2021. Although the RAC mixture exhibited a greater dispersion of results during the characterization tests, the beam’s load-bearing capacity was not affected. Experimental tests confirmed that the RAC beams achieved ultimate shear capacities comparable to or higher than those of the CC beams for all depths investigated. Moreover, the beams became increasingly fragile with increasing height. The experimental shear strengths were compared with the predictions from the SFRC shear model recommended in ABNT NBR 16935:2021. For both concretes, code-based shear resistances accounted for only about 30-45% of the mean experimental capacities, indicating markedly conservative estimates. The results demonstrate that partial replacement of natural coarse aggregates with recycled aggregates does not affect the shear performance of SFRC beams and can be safely combined for sustainable structural applications.
- Open Access
Evaluation and Calibration of Analytical Models for Predicting Splitting in Precast Concrete Tunnel Segments During TBM Thrust
This study, conducted with a rigorous statistical analysis, aims to assess the applicability of current analytical models in predicting the likelihood of splitting in precast concrete tunnel segments during the thrust phase of tunnel boring. Five analytical models were analyzed and compared to experimental results. The accuracy and precision of the models in predicting the splitting load were evaluated. The study revealed that the prediction accuracy of the models can be affected by various factors, such as the size and geometry of the test specimens and the type of test configuration used. An adjustment to the analytical models with the best performance is proposed to correct for statistical bias and enhance the predictions to address this issue. These findings are significant for the construction industry, as improved cracking control can reduce repair costs. Furthermore, enhancing the predictability of analytical models can improve the safety and reliability of precast concrete tunnel segments during tunnel boring.
Open AccessEvaluation and Calibration of Analytical Models for Predicting Splitting in Precast Concrete Tunnel Segments During TBM Thrust
This study, conducted with a rigorous statistical analysis, aims to assess the applicability of current analytical models in predicting the likelihood of splitting in precast concrete tunnel segments during the thrust phase of tunnel boring. Five analytical models were analyzed and compared to experimental results. The accuracy and precision of the models in predicting the splitting load were evaluated. The study revealed that the prediction accuracy of the models can be affected by various factors, such as the size and geometry of the test specimens and the type of test configuration used. An adjustment to the analytical models with the best performance is proposed to correct for statistical bias and enhance the predictions to address this issue. These findings are significant for the construction industry, as improved cracking control can reduce repair costs. Furthermore, enhancing the predictability of analytical models can improve the safety and reliability of precast concrete tunnel segments during tunnel boring.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (6)
Analytical and numerical investigation of deflections in UHPFRC beams under four-point bending
UHPFRC is a composite material characterized by its high strength, ductility, and durability. However, estimating deflections in UHPFRC beams is challenging due to the material's pronounced nonlinearity, which makes it difficult to apply conventional elastic analysis methods directly. Thus, this paper presents the development of an analytical method for calculating the load-deflection curves of reinforced UHPFRC beams subject to four-point bending. The methodology is based on cross-sectional equilibrium and compatibility to determine the curvatures along the beam, which are subsequently integrated using the principle of virtual work to obtain the deflections. The proposed approach is validated by comparing the results with experimental data from literature and with a finite element analysis performed in this study. The analytical method showed good agreement with the experimental results and exhibited strong agreement with the finite element simulations, particularly at service load levels.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (6)
Open AccessAnalytical and numerical investigation of deflections in UHPFRC beams under four-point bending
UHPFRC is a composite material characterized by its high strength, ductility, and durability. However, estimating deflections in UHPFRC beams is challenging due to the material's pronounced nonlinearity, which makes it difficult to apply conventional elastic analysis methods directly. Thus, this paper presents the development of an analytical method for calculating the load-deflection curves of reinforced UHPFRC beams subject to four-point bending. The methodology is based on cross-sectional equilibrium and compatibility to determine the curvatures along the beam, which are subsequently integrated using the principle of virtual work to obtain the deflections. The proposed approach is validated by comparing the results with experimental data from literature and with a finite element analysis performed in this study. The analytical method showed good agreement with the experimental results and exhibited strong agreement with the finite element simulations, particularly at service load levels.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (1) , e18113
Size effect on the flexural behavior of UHPFRC beams and RC beams strengthened with UHPFRC
The presence of fibers in Ultra-High-Performance Fiber Reinforced Concrete (UHPFRC) considerably affects the mechanical behavior of structural elements constructed from this material. While the flexural strength of traditional reinforced concrete beams is size-independent, this is not the case for UHPFRC. A numerical procedure based on cross-section equilibrium and compatibility is proposed here to parametrically investigate this size effect in both reinforced concrete beams strengthened with UHPFRC and pure UHPFRC beams. The flexural capacities computed using the numerical method agreed with those obtained experimentally from 14 experimental programs, with an average numerical-experimental ratio of 1.09 and a correlational coefficient of 0.94. Regarding the strengthened beams, the maximum flexural stresses were computed for three different strengthening layouts, considering heights from 100 to 2000 mm. As regards pure UHPFRC beams, the flexural strengths were computed for the same range of heights considering different fiber-volume ratios, as well as fiber lengths. The results show that three-side jacket beams are the most sensitive to the size effect, increasing the flexural strength of small members up to 697%. The beams strengthened on the compressive zone are the least sensitive, with an increase of 31% for the majority of beams. For pure UHPFRC beams, the results indicate that high fiber contents, such as 4%, led to a pronounced size effect, with increases in flexural strength of up to 1052% for the smallest beam compared to the concrete without fibers. Conversely, the use of 35 mm fibers instead of 13 mm attenuated the size effect, reducing the difference between the flexural strength of the smallest and the tallest members from 60 to 46%.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (1) , e18113
Open AccessSize effect on the flexural behavior of UHPFRC beams and RC beams strengthened with UHPFRC
The presence of fibers in Ultra-High-Performance Fiber Reinforced Concrete (UHPFRC) considerably affects the mechanical behavior of structural elements constructed from this material. While the flexural strength of traditional reinforced concrete beams is size-independent, this is not the case for UHPFRC. A numerical procedure based on cross-section equilibrium and compatibility is proposed here to parametrically investigate this size effect in both reinforced concrete beams strengthened with UHPFRC and pure UHPFRC beams. The flexural capacities computed using the numerical method agreed with those obtained experimentally from 14 experimental programs, with an average numerical-experimental ratio of 1.09 and a correlational coefficient of 0.94. Regarding the strengthened beams, the maximum flexural stresses were computed for three different strengthening layouts, considering heights from 100 to 2000 mm. As regards pure UHPFRC beams, the flexural strengths were computed for the same range of heights considering different fiber-volume ratios, as well as fiber lengths. The results show that three-side jacket beams are the most sensitive to the size effect, increasing the flexural strength of small members up to 697%. The beams strengthened on the compressive zone are the least sensitive, with an increase of 31% for the majority of beams. For pure UHPFRC beams, the results indicate that high fiber contents, such as 4%, led to a pronounced size effect, with increases in flexural strength of up to 1052% for the smallest beam compared to the concrete without fibers. Conversely, the use of 35 mm fibers instead of 13 mm attenuated the size effect, reducing the difference between the flexural strength of the smallest and the tallest members from 60 to 46%.
- 28 September 2024
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 154
Experimental and numerical investigation of flexural behavior of precast tunnel segments with hybrid reinforcement
- 28 September 2024
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 154
Experimental and numerical investigation of flexural behavior of precast tunnel segments with hybrid reinforcement