Yanjiang Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yanjiang Huang has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Xianmin Zhang
South China University of Technology
11 shared publications - Jun Ota
Research into Artifacts, Center of Engineering (RACE), School of Engineering, The University of Tokyo, Tokyo, Japan
7 shared publications Xianmin Zhang
South China University of Technology
4 shared publicationsJianhong Ke
Guangdong Provincial Key Laboratory of Precision Equipment and Manufacturing Technology, South China University of Technology, Guangzhou, China
3 shared publications- Kai Wang
Foshan University
3 shared publications Kaibin Chen
Guangdong Key Laboratory of Precision Equipment and Manufacturing Technology, School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, P. R. China
2 shared publications
Latest Publications
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. PP (10834435) , 1-12
Stiffness Modeling and Experiments on a Low-Tension, Fully Actuated, Cable-Driven Manipulator With a Stiffness Regulator Module
Cable-driven robots offer low inertia and high compliance, making them ideal for collaborative robotics. This article addresses the challenge of tension slack in fully actuated cable-driven manipulators by proposing solutions from both design and modeling. A novel stiffness regulator module (SRM) is proposed that integrates real-time tension monitoring and antislack control via an embedded pressure sensor. A low-tension stiffness model for the pulley-cable structure (PCS) is developed and combined with cable and SRM stiffness models to establish a system-level and joint-level stiffness models. Experimental validation on a custom cable-driven manipulator confirms model accuracy. Component tests (cable, SRM, and PCS) and joint stiffness measurements across varying angles and pretension levels yield mean absolute percentage errors (MAPEs) of 6.49% (without PCS) and 5.08% (with PCS). At high pretension, PCS influence is negligible (MAPE ≤ 6.13% ); under low tension (< 2 N) along the wrist z-axis, including PCS reduces error by up to 79% (from 2.13% to 0.44% ). These results demonstrate that in low-tension environments, the PCS stiffness model introduced in this article yields significantly more accurate predictions of the stiffness of the cable-driven system. This work provides theoretical foundations and practical implementation methods for achieving high-precision stiffness measurement and control in cable-driven robots.
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. PP (10834435) , 1-12
Stiffness Modeling and Experiments on a Low-Tension, Fully Actuated, Cable-Driven Manipulator With a Stiffness Regulator Module
Cable-driven robots offer low inertia and high compliance, making them ideal for collaborative robotics. This article addresses the challenge of tension slack in fully actuated cable-driven manipulators by proposing solutions from both design and modeling. A novel stiffness regulator module (SRM) is proposed that integrates real-time tension monitoring and antislack control via an embedded pressure sensor. A low-tension stiffness model for the pulley-cable structure (PCS) is developed and combined with cable and SRM stiffness models to establish a system-level and joint-level stiffness models. Experimental validation on a custom cable-driven manipulator confirms model accuracy. Component tests (cable, SRM, and PCS) and joint stiffness measurements across varying angles and pretension levels yield mean absolute percentage errors (MAPEs) of 6.49% (without PCS) and 5.08% (with PCS). At high pretension, PCS influence is negligible (MAPE ≤ 6.13% ); under low tension (< 2 N) along the wrist z-axis, including PCS reduces error by up to 79% (from 2.13% to 0.44% ). These results demonstrate that in low-tension environments, the PCS stiffness model introduced in this article yields significantly more accurate predictions of the stiffness of the cable-driven system. This work provides theoretical foundations and practical implementation methods for achieving high-precision stiffness measurement and control in cable-driven robots.
- 13 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (5) , 5630-5637
A VAGP-Based Adaptive Kalman Filter for Force Estimation of Robot
In human-robot interaction, external force measurement is fundamental to achieving robot compliance control. Parameter identification based on robot dynamics enables external force detection without expensive sensors. However, the unmodeled dynamic errors inherent in real robots pose a challenge to force estimation accuracy. In addition, existing force estimation methods often suffer from high computational dimensionality and an excessive number of tuning parameters, which limits their generalizability and migration to other platforms. In this letter, we employ a Variational Approximate Gaussian Process Regression (VAGP) model to learn the robot's dynamic errors, capturing both the mean and covariance of the error. Then we introduced the indirect measurement form and proposed a dimension-reduced Kalman filter (DRKF) to simplify the state space equation. Finally, we propose a VAGP-based adaptive Kalman filter (VAGAKF) that utilizes the least squares method to reduce the number of tuning parameters. VAGAKF effectively separates external forces from dynamics model uncertainty, reducing reliance on highly accurate robot and external force models. VAGAKF reduces average RMSE and time delay by $\bm {23.06\%}$ and $\bm {66.7\%}$ respectively, relative to existing methods.
- 13 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (5) , 5630-5637
A VAGP-Based Adaptive Kalman Filter for Force Estimation of Robot
In human-robot interaction, external force measurement is fundamental to achieving robot compliance control. Parameter identification based on robot dynamics enables external force detection without expensive sensors. However, the unmodeled dynamic errors inherent in real robots pose a challenge to force estimation accuracy. In addition, existing force estimation methods often suffer from high computational dimensionality and an excessive number of tuning parameters, which limits their generalizability and migration to other platforms. In this letter, we employ a Variational Approximate Gaussian Process Regression (VAGP) model to learn the robot's dynamic errors, capturing both the mean and covariance of the error. Then we introduced the indirect measurement form and proposed a dimension-reduced Kalman filter (DRKF) to simplify the state space equation. Finally, we propose a VAGP-based adaptive Kalman filter (VAGAKF) that utilizes the least squares method to reduce the number of tuning parameters. VAGAKF effectively separates external forces from dynamics model uncertainty, reducing reliance on highly accurate robot and external force models. VAGAKF reduces average RMSE and time delay by $\bm {23.06\%}$ and $\bm {66.7\%}$ respectively, relative to existing methods.
- 16 October 2025
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 43 (10) , 3737-3754
Design of a novel auxiliary standing knee exoskeleton with variable stiffness
With increasing age, many elderly individuals will not be able to stand normally. To solve this problem, a knee exoskeleton is designed. The knee joint is designed as a variable stiffness structure. It can adjust its stiffness according to the body’s movement state, ensuring precise assistance while also enhancing human comfort. The variable stiffness mechanism consists of an elastic output actuator and a stiffness-adjusting actuator. The elastic output actuator is mainly responsible for the output of the joint torque. The stiffness-adjusting actuator is mainly responsible for adjusting the joint stiffness. These two mechanisms are analysed separately. Based on their relationship with the whole mechanism, a stiffness model of the entire knee joint is established. Experiments are subsequently conducted to evaluate the variable stiffness joint. The stiffness identification experiment indicates that the actual stiffness of the whole knee joint is essentially consistent with the theoretical value. The trajectory tracking experiment demonstrates that the joint exhibits excellent trajectory tracking capability, although stiffness has a certain effect. The exoskeleton assistive effect experiment demonstrates the ability of the exoskeleton to assist in standing. Additionally, the experiment on subjects with exoskeletons of different stiffnesses determines the impact of stiffness on human comfort.
- 16 October 2025
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 43 (10) , 3737-3754
Design of a novel auxiliary standing knee exoskeleton with variable stiffness
With increasing age, many elderly individuals will not be able to stand normally. To solve this problem, a knee exoskeleton is designed. The knee joint is designed as a variable stiffness structure. It can adjust its stiffness according to the body’s movement state, ensuring precise assistance while also enhancing human comfort. The variable stiffness mechanism consists of an elastic output actuator and a stiffness-adjusting actuator. The elastic output actuator is mainly responsible for the output of the joint torque. The stiffness-adjusting actuator is mainly responsible for adjusting the joint stiffness. These two mechanisms are analysed separately. Based on their relationship with the whole mechanism, a stiffness model of the entire knee joint is established. Experiments are subsequently conducted to evaluate the variable stiffness joint. The stiffness identification experiment indicates that the actual stiffness of the whole knee joint is essentially consistent with the theoretical value. The trajectory tracking experiment demonstrates that the joint exhibits excellent trajectory tracking capability, although stiffness has a certain effect. The exoskeleton assistive effect experiment demonstrates the ability of the exoskeleton to assist in standing. Additionally, the experiment on subjects with exoskeletons of different stiffnesses determines the impact of stiffness on human comfort.
- 25 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (1) , 651-662
Variable Parameter Admittance Control of Robot Based on a Virtual Force/Torque Sensor
Admittance control enables supple control of a robot through force-motion mapping, allowing robots to actively adapt to forces exerted by humans during interaction, which are typically collected through force sensors. In addition, since the requirements for admittance control parameters vary at different stages of the task, it is necessary to propose a variable parameter strategy to improve task success rate and efficiency. Therefore, this article proposes a variable parameter admittance control without force sensors. First, The performance of the three observers in terms of estimation accuracy, computational efficiency, and parameter tuning is compared, and the virtual force/torque (F/T) sensor is designed accordingly. Second, a variable parameter admittance control with virtual F/T sensor is proposed to reduce the robot’s recovery time after withdrawing the external force. The proposed method was verified on two robots with different degrees of freedom. The experimental results show that the estimated values of the virtual F/T sensor of both robots can follow the changes in the measured values. The variable parameter admittance control enables rapid response to external forces and improves work efficiency. Furthermore, the proposed method can complete the bearing assembly task.
- 25 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (1) , 651-662
Variable Parameter Admittance Control of Robot Based on a Virtual Force/Torque Sensor
Admittance control enables supple control of a robot through force-motion mapping, allowing robots to actively adapt to forces exerted by humans during interaction, which are typically collected through force sensors. In addition, since the requirements for admittance control parameters vary at different stages of the task, it is necessary to propose a variable parameter strategy to improve task success rate and efficiency. Therefore, this article proposes a variable parameter admittance control without force sensors. First, The performance of the three observers in terms of estimation accuracy, computational efficiency, and parameter tuning is compared, and the virtual force/torque (F/T) sensor is designed accordingly. Second, a variable parameter admittance control with virtual F/T sensor is proposed to reduce the robot’s recovery time after withdrawing the external force. The proposed method was verified on two robots with different degrees of freedom. The experimental results show that the estimated values of the virtual F/T sensor of both robots can follow the changes in the measured values. The variable parameter admittance control enables rapid response to external forces and improves work efficiency. Furthermore, the proposed method can complete the bearing assembly task.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (21) , 26259-26268
Accurate Pose Estimation of the Texture-Less Objects With Known CAD Models via Point Cloud Matching
As the use of robot-based automation continues to expand in various production fields, achieving accurate pose estimation of texture-less objects has become increasingly significant and challenging. This paper proposes an accurate pose estimation algorithm for texture-less objects with known CAD models by using point cloud matching. The algorithm mainly includes four parts, namely the offline data generation, global matching, local matching, and fine registration, respectively. To generate the reference point clouds required for coarse matching, the synthetic view rendering technique is utilized in the offline data generation step. To address the problem of feature matching ambiguity caused by incorrect correspondences in both the scene and reference point clouds, we introduce a similar view filter and a pose cluster mechanism in the global and local matching steps, respectively. Additionally, the Genetic Algorithm is utilized in the fine registration step, in which the incremental Euler angle modeling is introduced to avoid boundary cliffs and improve the searching accuracy and speed. Finally, a series of experiments on T-LESS dataset are conducted to demonstrate the effectiveness of our work. Compared with the state-of-the-art methods, the results show that our method improves the accuracy by at least 18% for single-input single-output pose estimation of texture-less objects.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (21) , 26259-26268
Accurate Pose Estimation of the Texture-Less Objects With Known CAD Models via Point Cloud Matching
As the use of robot-based automation continues to expand in various production fields, achieving accurate pose estimation of texture-less objects has become increasingly significant and challenging. This paper proposes an accurate pose estimation algorithm for texture-less objects with known CAD models by using point cloud matching. The algorithm mainly includes four parts, namely the offline data generation, global matching, local matching, and fine registration, respectively. To generate the reference point clouds required for coarse matching, the synthetic view rendering technique is utilized in the offline data generation step. To address the problem of feature matching ambiguity caused by incorrect correspondences in both the scene and reference point clouds, we introduce a similar view filter and a pose cluster mechanism in the global and local matching steps, respectively. Additionally, the Genetic Algorithm is utilized in the fine registration step, in which the incremental Euler angle modeling is introduced to avoid boundary cliffs and improve the searching accuracy and speed. Finally, a series of experiments on T-LESS dataset are conducted to demonstrate the effectiveness of our work. Compared with the state-of-the-art methods, the results show that our method improves the accuracy by at least 18% for single-input single-output pose estimation of texture-less objects.
- Top Cited Papers
- 14 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (2) , 1607-1621
Dynamic Parameter Identification of Serial Robots Using a Hybrid Approach
Model-based control can provide high-accuracy performance over position-based or velocity-based control. Therefore, to employ model-based control in industrial robots, it is important to estimate the dynamic parameters as accurately as possible. However, traditional estimation methods, such as least squares (LS), are not sufficiently accurate, and the feasibility of dynamic parameters cannot be guaranteed. In this article, an iterative hybrid least square (IHLS) algorithm is proposed to estimate the base parameters of industrial robots by dividing the identification processes into two loops. The inner loop integrates a linear matrix inequality with the semidefinite programming technique to guarantee physical feasibility and reuses the torque deviations between the measured torque and predicted torque to estimate the base parameters of the robot, while the outer loop substitutes the Stribeck friction model for the Coulomb-viscous friction model to estimate the joint friction torque. Moreover, backpropagation neural network (BPNN) is introduced to further estimate the joint friction torque based on the Stribeck friction model. Experiments are conducted on two industrial robots, and four methods are compared in dynamic parameter identification. Experimental results show that the hybrid approach of the IHLS algorithm with the BPNN has the best performance among the four methods.
- 14 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (2) , 1607-1621
Top Cited PapersDynamic Parameter Identification of Serial Robots Using a Hybrid Approach
Model-based control can provide high-accuracy performance over position-based or velocity-based control. Therefore, to employ model-based control in industrial robots, it is important to estimate the dynamic parameters as accurately as possible. However, traditional estimation methods, such as least squares (LS), are not sufficiently accurate, and the feasibility of dynamic parameters cannot be guaranteed. In this article, an iterative hybrid least square (IHLS) algorithm is proposed to estimate the base parameters of industrial robots by dividing the identification processes into two loops. The inner loop integrates a linear matrix inequality with the semidefinite programming technique to guarantee physical feasibility and reuses the torque deviations between the measured torque and predicted torque to estimate the base parameters of the robot, while the outer loop substitutes the Stribeck friction model for the Coulomb-viscous friction model to estimate the joint friction torque. Moreover, backpropagation neural network (BPNN) is introduced to further estimate the joint friction torque based on the Stribeck friction model. Experiments are conducted on two industrial robots, and four methods are compared in dynamic parameter identification. Experimental results show that the hybrid approach of the IHLS algorithm with the BPNN has the best performance among the four methods.
- 4 June 2022
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 36 (6) , 3131-3142
Novel torsional spring with corrugated flexible units for series elastic actuators for cooperative robots
- 4 June 2022
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 36 (6) , 3131-3142
Novel torsional spring with corrugated flexible units for series elastic actuators for cooperative robots
- 23 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 26 (4) , 2174-2185
A Novel Cable-Driven 7-DOF Anthropomorphic Manipulator
Safety design of robot arm is important for human-robot interaction. In this article, an anthropomorphic seven-DOF cable-driven manipulator, including a three-DOF shoulder joint module, a one-DOF elbow joint module, and a three-DOF wrist joint module, is proposed for human-robot interaction. These three joint modules are connected serially and the motion transmission is realized by rope. The joint stiffness and workspace of joint module are numerically analyzed and compared to that of the human arm joint. A protype of manipulator is machined and used to evaluate the joint stiffness and workspace of the joint module through experiments. The mass of the designed manipulator is approximately 4.8 kg, which is similar to that of a human arm. The stiffness of elbow joint is 185.25 N·m/rad in positive direction and 133.75 N·m/rad in negative direction, which is smaller than that of the human elbow joint. The stiffness of wrist joint is 48.25 N·m/rad. The stiffness of shoulder joint under two configurations is 138 and 124 N·m/rad. The workspace matching index (WMI) is used to evaluate the workspace of joint module by comparing to that of the human arm joint. The WMI of the developed shoulder joint is approximately 40% of the human shoulder joint due to the structure constraint. While the workspaces of the developed elbow joint and wrist joint are the same with that of human joint.
- 23 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 26 (4) , 2174-2185
A Novel Cable-Driven 7-DOF Anthropomorphic Manipulator
Safety design of robot arm is important for human-robot interaction. In this article, an anthropomorphic seven-DOF cable-driven manipulator, including a three-DOF shoulder joint module, a one-DOF elbow joint module, and a three-DOF wrist joint module, is proposed for human-robot interaction. These three joint modules are connected serially and the motion transmission is realized by rope. The joint stiffness and workspace of joint module are numerically analyzed and compared to that of the human arm joint. A protype of manipulator is machined and used to evaluate the joint stiffness and workspace of the joint module through experiments. The mass of the designed manipulator is approximately 4.8 kg, which is similar to that of a human arm. The stiffness of elbow joint is 185.25 N·m/rad in positive direction and 133.75 N·m/rad in negative direction, which is smaller than that of the human elbow joint. The stiffness of wrist joint is 48.25 N·m/rad. The stiffness of shoulder joint under two configurations is 138 and 124 N·m/rad. The workspace matching index (WMI) is used to evaluate the workspace of joint module by comparing to that of the human arm joint. The WMI of the developed shoulder joint is approximately 40% of the human shoulder joint due to the structure constraint. While the workspaces of the developed elbow joint and wrist joint are the same with that of human joint.
- 1 September 2020
- Published by Elsevier in Biomedical Signal Processing and Control
- Vol. 62
Joint torque estimation for the human arm from sEMG using backpropagation neural networks and autoencoders
- 1 September 2020
- Published by Elsevier in Biomedical Signal Processing and Control
- Vol. 62
Joint torque estimation for the human arm from sEMG using backpropagation neural networks and autoencoders
- Open Access
- 1 April 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 825 (1)
Hybrid Impedance Control of Robot Manipulators based on Generalized Momentum
In the hybrid impedance control strategy, the task space is divided into position control subspace and force control subspace, and the constraint direction in the manipulator task space is controlled by torque-based impedance control, while the free movement direction is controlled by position-based impedance control. The hybrid impedance control has strong force tracking characteristics in the direction of force control and strong flexibility in the direction of position control. In this paper, we use the generalized momentum observer instead of the torque sensor to estimate the torque exerted by the external environment on the robot. Simulation results are shown for a three-link SCARA robot.
- 1 April 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 825 (1)
Open AccessHybrid Impedance Control of Robot Manipulators based on Generalized Momentum
In the hybrid impedance control strategy, the task space is divided into position control subspace and force control subspace, and the constraint direction in the manipulator task space is controlled by torque-based impedance control, while the free movement direction is controlled by position-based impedance control. The hybrid impedance control has strong force tracking characteristics in the direction of force control and strong flexibility in the direction of position control. In this paper, we use the generalized momentum observer instead of the torque sensor to estimate the torque exerted by the external environment on the robot. Simulation results are shown for a three-link SCARA robot.