Angel M. Martinez-Villacorta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Angel M. Martinez-Villacorta has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Sergio Enrique Moya
Soft Matter Nanotechnology Group, CIC biomaGUNE, Basque Research and Technological Alliance, San Sebastian, Spain
11 shared publications - Didier Astruc
Institut des Sciences Moléculaires, Université de Bordeaux, UMR CNRS 5255, Talence 33405 Cedex, France
10 shared publications - Ane Escobar
CIC biomaGUNE Paseo de Miramon 182 20014 Donostia‐San Sebastian Spain
8 shared publications Jaime Ruiz
ISM, UMR CNRS 5255, Université de Bordeaux, Talence 33405 Cedex, France
6 shared publicationsRoberto Ciganda
ISM, UMR CNRS 5255, Université de Bordeaux, Talence 33405 Cedex, France
5 shared publicationsChanglong Wang
ISM, UMR CNRS 5255, Université de Bordeaux, Talence 33405 Cedex, France
4 shared publications
Latest Publications
- 4 June 2021
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2021 (25) , 2471-2479
Generation of Catalytically Active Gold Nanocrystals in Water Induced with Ferrocene Carboxylate
The fabrication and properties of anisotropic gold nanoparticles (AuNPs) are of great interest from fundamental and application standpoints. Whereas various neutral ferrocene derivatives have been shown to reduce AuIII to Au0NPs owing to slightly exergonic electron transfer in biphasic systems, the question remained open for water soluble ferrocenes containing electron withdrawing substituents increasing the FeIII/FeII oxidation potential. Here, it is shown that reaction of sodium ferrocene carboxylate, NaFcCO2, alone, does not reduce H[AuIIICl4] to stable AuNPs under ambient conditions in water. On the other hand, reaction between NaFcCO2 and H[AuIIICl4] in water in the presence of poly (vinyl pyrrolidone) (PVP), citrate or other 1,2,3‐triazole (trz)‐containing stabilizers is shown to produce catalytically active Au nanocrystals with various shapes. EDX results confirm the fixation of the ferrocenyl carboxylate ligand onto the AuNP surface. 4‐nitrophenol reduction to 4‐aminophenol by Na[BH4] in water proceeds in the presence of the various stabilizers, without induction time in most cases, which confirms the weakness of the ferrocenyl carboxylate ligand bonded to the AuNP surface and the favorable role of ferrocenyl carboxylate ligand for catalysis at the AuNP surface.
- 4 June 2021
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2021 (25) , 2471-2479
Generation of Catalytically Active Gold Nanocrystals in Water Induced with Ferrocene Carboxylate
The fabrication and properties of anisotropic gold nanoparticles (AuNPs) are of great interest from fundamental and application standpoints. Whereas various neutral ferrocene derivatives have been shown to reduce AuIII to Au0NPs owing to slightly exergonic electron transfer in biphasic systems, the question remained open for water soluble ferrocenes containing electron withdrawing substituents increasing the FeIII/FeII oxidation potential. Here, it is shown that reaction of sodium ferrocene carboxylate, NaFcCO2, alone, does not reduce H[AuIIICl4] to stable AuNPs under ambient conditions in water. On the other hand, reaction between NaFcCO2 and H[AuIIICl4] in water in the presence of poly (vinyl pyrrolidone) (PVP), citrate or other 1,2,3‐triazole (trz)‐containing stabilizers is shown to produce catalytically active Au nanocrystals with various shapes. EDX results confirm the fixation of the ferrocenyl carboxylate ligand onto the AuNP surface. 4‐nitrophenol reduction to 4‐aminophenol by Na[BH4] in water proceeds in the presence of the various stabilizers, without induction time in most cases, which confirms the weakness of the ferrocenyl carboxylate ligand bonded to the AuNP surface and the favorable role of ferrocenyl carboxylate ligand for catalysis at the AuNP surface.
- 14 August 2019
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 6 (10) , 2704-2708
High catalytic activity of Rh nanoparticles generated from cobaltocene and RhCl 3 in aqueous solution
Cobalticinium chloride-stabilized RhNPs are very efficient catalysts for hydrolysis of H 3 N-BH 3 , reduction of 4-NP, hydrogenation of benzene and transfer hydrogenation.
- 14 August 2019
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 6 (10) , 2704-2708
High catalytic activity of Rh nanoparticles generated from cobaltocene and RhCl 3 in aqueous solution
Cobalticinium chloride-stabilized RhNPs are very efficient catalysts for hydrolysis of H 3 N-BH 3 , reduction of 4-NP, hydrogenation of benzene and transfer hydrogenation.
- 1 March 2019
- Published by Elsevier in Applied Surface Science
- Vol. 471, 862-868
Copper nanoparticles synthesis in hybrid mesoporous thin films: Controlling oxidation state and catalytic performance through pore chemistry
- 1 March 2019
- Published by Elsevier in Applied Surface Science
- Vol. 471, 862-868
Copper nanoparticles synthesis in hybrid mesoporous thin films: Controlling oxidation state and catalytic performance through pore chemistry
- 24 July 2018
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 8 (9) , 8100-8106
Cobaltocene Reduction of Cu and Ag Salts and Catalytic Behavior of the Nanoparticles Formed
- 24 July 2018
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 8 (9) , 8100-8106
Cobaltocene Reduction of Cu and Ag Salts and Catalytic Behavior of the Nanoparticles Formed
- 18 July 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 24 (48) , 12686-12694
Electron Flow in Large Metallomacromolecules and Electronic Switching of Nanoparticle Stabilization: Click Ferrocenyl Dentromers that Reduce AuIII to Au Nanoparticles
Click ferrocenyl‐terminal dentromers, a family of arene‐cored dendrimers with triple branching (9‐Fc, 27‐Fc, 81‐Fc, and 243‐Fc), reduce AuIII to ferricinium dentromer‐stabilized Au nanoparticles (AuNPs). Cyclic voltammetry studies in CH2Cl2 show reversible CV waves with some adsorption for the 243‐Fc dentromer and the number of redox groups found, 255±25, by using the Bard–Anson method, is close to the theoretical number of 243. The dentromers reduce aqueous HAuCl4 to water‐soluble ferricinium chloride dentromer‐stabilized AuNPs with core sizes between 30 and 47 nm. These triazolylferricinium dentromer‐stabilized AuNPs are reduced by cobaltocene to cobalticinium chloride and ferrocene dentromer weakly stabilized AuNPs together with a redshift of the AuNP plasmon. The weakness of the AuNP stabilization is characterized by dentromer extraction with CH2Cl2 along with irreversible AuNP agglomeration for the 9, 27, and 81‐ferrocenyl dentromer, with only the 243‐ferrocenyl dentromer‐AuNP withstanding this process. Altogether, this demonstrates the electronic switching of the dentromer‐mediated AuNP stabilization.
- 18 July 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 24 (48) , 12686-12694
Electron Flow in Large Metallomacromolecules and Electronic Switching of Nanoparticle Stabilization: Click Ferrocenyl Dentromers that Reduce AuIII to Au Nanoparticles
Click ferrocenyl‐terminal dentromers, a family of arene‐cored dendrimers with triple branching (9‐Fc, 27‐Fc, 81‐Fc, and 243‐Fc), reduce AuIII to ferricinium dentromer‐stabilized Au nanoparticles (AuNPs). Cyclic voltammetry studies in CH2Cl2 show reversible CV waves with some adsorption for the 243‐Fc dentromer and the number of redox groups found, 255±25, by using the Bard–Anson method, is close to the theoretical number of 243. The dentromers reduce aqueous HAuCl4 to water‐soluble ferricinium chloride dentromer‐stabilized AuNPs with core sizes between 30 and 47 nm. These triazolylferricinium dentromer‐stabilized AuNPs are reduced by cobaltocene to cobalticinium chloride and ferrocene dentromer weakly stabilized AuNPs together with a redshift of the AuNP plasmon. The weakness of the AuNP stabilization is characterized by dentromer extraction with CH2Cl2 along with irreversible AuNP agglomeration for the 9, 27, and 81‐ferrocenyl dentromer, with only the 243‐ferrocenyl dentromer‐AuNP withstanding this process. Altogether, this demonstrates the electronic switching of the dentromer‐mediated AuNP stabilization.
- Top Cited Papers
- 11 July 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (31) , 10034-10042
Highly Selective and Sharp Volcano-type Synergistic Ni2Pt@ZIF-8-Catalyzed Hydrogen Evolution from Ammonia Borane Hydrolysis
Ammonia borane hydrolysis is considered as a potential means of safe and fast method of H2 production if it is efficiently catalyzed. Here a series of nearly monodispersed alloyed bimetallic nanoparticle catalysts are introduced, optimized among transition metals, and found to be extremely efficient and highly selective with sharp positive synergy between 2/3 Ni and 1/3 Pt embedded inside a zeolitic imidazolate framework (ZIF-8) support. These catalysts are much more efficient for H2 release than either Ni or Pt analogues alone on this support, and for instance the best catalyst Ni2Pt@ZiF-8 achieves a TOF of 600 molH2 · molcatal.-1 · min-1 and 2222 molH2 · molPt-1 · min-1 under ambient conditions, which overtakes performances of previous Pt-base catalysts. The presence of NaOH boosts H2 evolution that becomes 87 times faster than in its absence with Ni2Pt@ZiF-8, whereas NaOH decreases H2 evolution on the related Pt@ZiF-8 catalyst. The ZIF-8 support appears outstanding and much more efficient than other supports including graphene oxide, active carbon and SBA-15 with these nanoparticles. Mechanistic studies especially involving kinetic isotope effects using D2O show that cleavage by oxidative addition of an O-H bond of water onto the catalyst surface is the rate-determining step of this reaction. The remarkable catalyst activity of Ni2Pt@ZiF-8 has been exploited for successful tandem catalytic hydrogenation reactions using ammonia borane as H2 source. In conclusion the selective and remarkable synergy disclosed here together with the mechanistic results should allow significant progress in catalyst design towards convenient H2 generation from hydrogen-rich substrates in the close future.
- 11 July 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (31) , 10034-10042
Top Cited PapersHighly Selective and Sharp Volcano-type Synergistic Ni2Pt@ZIF-8-Catalyzed Hydrogen Evolution from Ammonia Borane Hydrolysis
Ammonia borane hydrolysis is considered as a potential means of safe and fast method of H2 production if it is efficiently catalyzed. Here a series of nearly monodispersed alloyed bimetallic nanoparticle catalysts are introduced, optimized among transition metals, and found to be extremely efficient and highly selective with sharp positive synergy between 2/3 Ni and 1/3 Pt embedded inside a zeolitic imidazolate framework (ZIF-8) support. These catalysts are much more efficient for H2 release than either Ni or Pt analogues alone on this support, and for instance the best catalyst Ni2Pt@ZiF-8 achieves a TOF of 600 molH2 · molcatal.-1 · min-1 and 2222 molH2 · molPt-1 · min-1 under ambient conditions, which overtakes performances of previous Pt-base catalysts. The presence of NaOH boosts H2 evolution that becomes 87 times faster than in its absence with Ni2Pt@ZiF-8, whereas NaOH decreases H2 evolution on the related Pt@ZiF-8 catalyst. The ZIF-8 support appears outstanding and much more efficient than other supports including graphene oxide, active carbon and SBA-15 with these nanoparticles. Mechanistic studies especially involving kinetic isotope effects using D2O show that cleavage by oxidative addition of an O-H bond of water onto the catalyst surface is the rate-determining step of this reaction. The remarkable catalyst activity of Ni2Pt@ZiF-8 has been exploited for successful tandem catalytic hydrogenation reactions using ammonia borane as H2 source. In conclusion the selective and remarkable synergy disclosed here together with the mechanistic results should allow significant progress in catalyst design towards convenient H2 generation from hydrogen-rich substrates in the close future.
- 14 April 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 24 (25) , 6645-6653
Electron‐ and Hydride‐Reservoir Organometallics as Precursors of Catalytically Efficient Transition Metal Nanoparticles in Water
Nanoparticles (NPs) are actively investigated for their efficient use in catalysis, but their means of synthesis is a key factor influencing their catalytic properties owing to surface coverage with byproducts. Here, neutral electron‐ and hydride‐rich late transition metal organometallics are compared for the synthesis of late transition metal NPs in the presence of poly(vinylpirolidone) (PVP). In particular, the effect of electron‐reservoir donors, hydride‐reservoir donors, and electron‐rich dimers yielding NPs electrostatically stabilized by cationic organometallics are compared in terms of NP size and catalytic efficiency. The catalytic reactions scrutinized with excellent results include 4‐nitrophenol reduction to 4‐aminophenol by NaBH4 for the AuNPs and PdNPs, and Suzuki–Miyaura reactions for the PdNPs. The nature of the reductant has more influence on the NP size in the case of AuNPs than PdNPs, and the best NP catalysts are obtained with hydride‐reservoir complexes as reductants. The less bulky hydride donors are superior, with the complex [CoCp(ŋ4‐C5H6)] (Cp=ŋ5‐C5H5) giving the NPs with the best catalyst efficiencies for both reactions. Protection of the NP cores by the organometallic sandwich salt is found to be the key to catalytic efficiency.
- 14 April 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 24 (25) , 6645-6653
Electron‐ and Hydride‐Reservoir Organometallics as Precursors of Catalytically Efficient Transition Metal Nanoparticles in Water
Nanoparticles (NPs) are actively investigated for their efficient use in catalysis, but their means of synthesis is a key factor influencing their catalytic properties owing to surface coverage with byproducts. Here, neutral electron‐ and hydride‐rich late transition metal organometallics are compared for the synthesis of late transition metal NPs in the presence of poly(vinylpirolidone) (PVP). In particular, the effect of electron‐reservoir donors, hydride‐reservoir donors, and electron‐rich dimers yielding NPs electrostatically stabilized by cationic organometallics are compared in terms of NP size and catalytic efficiency. The catalytic reactions scrutinized with excellent results include 4‐nitrophenol reduction to 4‐aminophenol by NaBH4 for the AuNPs and PdNPs, and Suzuki–Miyaura reactions for the PdNPs. The nature of the reductant has more influence on the NP size in the case of AuNPs than PdNPs, and the best NP catalysts are obtained with hydride‐reservoir complexes as reductants. The less bulky hydride donors are superior, with the complex [CoCp(ŋ4‐C5H6)] (Cp=ŋ5‐C5H5) giving the NPs with the best catalyst efficiencies for both reactions. Protection of the NP cores by the organometallic sandwich salt is found to be the key to catalytic efficiency.
- Open Access
- 29 January 2018
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 12 (2) , 1220-1227
Medical Imaging for the Tracking of Micromotors
Micro/nanomotors are useful tools for several biomedical applications, including targeted drug delivery and minimally invasive microsurgeries. However, major challenges such as in vivo imaging need to be addressed before they can be safely applied on a living body. Here, we show that positron emission tomography (PET), a molecular imaging technique widely used in medical imaging, can also be used to track a large population of tubular Au/PEDOT/Pt micromotors. Chemisorption of an iodine isotope onto the micromotor’s Au surface rendered them detectable by PET, and we could track their movements in a tubular phantom over time frames of up to 15 min. In a second set of experiments, micromotors and the bubbles released during self-propulsion were optically tracked by video imaging and bright-field microscopy. The results from direct optical tracking agreed with those from PET tracking, demonstrating that PET is a suitable technique for the imaging of large populations of active micromotors in opaque environments, thus opening opportunities for the use of this mature imaging technology for the in vivo localization of artificial swimmers.
- 29 January 2018
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 12 (2) , 1220-1227
Open AccessMedical Imaging for the Tracking of Micromotors
Micro/nanomotors are useful tools for several biomedical applications, including targeted drug delivery and minimally invasive microsurgeries. However, major challenges such as in vivo imaging need to be addressed before they can be safely applied on a living body. Here, we show that positron emission tomography (PET), a molecular imaging technique widely used in medical imaging, can also be used to track a large population of tubular Au/PEDOT/Pt micromotors. Chemisorption of an iodine isotope onto the micromotor’s Au surface rendered them detectable by PET, and we could track their movements in a tubular phantom over time frames of up to 15 min. In a second set of experiments, micromotors and the bubbles released during self-propulsion were optically tracked by video imaging and bright-field microscopy. The results from direct optical tracking agreed with those from PET tracking, demonstrating that PET is a suitable technique for the imaging of large populations of active micromotors in opaque environments, thus opening opportunities for the use of this mature imaging technology for the in vivo localization of artificial swimmers.
- 13 October 2017
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 4 (12) , 2037-2044
Synthesis of late transition-metal nanoparticles by Na naphthalenide reduction of salts and their catalytic efficiency
The investigation of new methods of facile synthesis of salt-free, catalytically efficient nanoparticles is challenging. Pd, Cu, Ag and Au nanoparticles (NPs) have been synthesized here by Na naphthalenide reduction of commercial transition-metal salts in THF or MeCN in the presence of poly(ethylene glycol). These NPs have been characterized by UV-vis. and XPS spectroscopy showing the presence of zero-valent metals and by TEM showing their small sizes. They have been purified by double extraction benefiting from the salting-out effect. The catalytic properties of these NPs have been compared for the classic 4-nitrophenol reduction by excess NaBH4. The small Pd and Au NPs (1.7 resp. 2.0 nm) are the most efficient catalysts without retention times for this reaction, whereas Cu and Ag nanoparticles that are larger (3.3 resp. 4 nm) showed retention times and lower rate constants. NPs purified by the salting-out effect were more efficient than non-purified ones. PdNPs were also very active catalysts for the Suzuki–Miyaura reaction between bromobenzene and phenylboronic acid (95% yield with 100 ppm Pd) and for the Sonogashira reaction between phenyl acetylene and iodobenzene. CuNPs reported using this method were more efficient “click” catalysts as Cu2ONPs, and these NPs were used in organometallic “click” synthesis and Sonogashira co-catalysis. For the latter PdNP-catalyzed reaction, the yield was slightly improved in the presence of supported Cu2ONP on SBA-15 (90% vs. 81%). Supporting the PdNP catalyst on SBA-15 even proceeded without a large NP size change, provided improved reaction yields and afforded several recycling cycles without significant Pd leaching.
- 13 October 2017
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 4 (12) , 2037-2044
Synthesis of late transition-metal nanoparticles by Na naphthalenide reduction of salts and their catalytic efficiency
The investigation of new methods of facile synthesis of salt-free, catalytically efficient nanoparticles is challenging. Pd, Cu, Ag and Au nanoparticles (NPs) have been synthesized here by Na naphthalenide reduction of commercial transition-metal salts in THF or MeCN in the presence of poly(ethylene glycol). These NPs have been characterized by UV-vis. and XPS spectroscopy showing the presence of zero-valent metals and by TEM showing their small sizes. They have been purified by double extraction benefiting from the salting-out effect. The catalytic properties of these NPs have been compared for the classic 4-nitrophenol reduction by excess NaBH4. The small Pd and Au NPs (1.7 resp. 2.0 nm) are the most efficient catalysts without retention times for this reaction, whereas Cu and Ag nanoparticles that are larger (3.3 resp. 4 nm) showed retention times and lower rate constants. NPs purified by the salting-out effect were more efficient than non-purified ones. PdNPs were also very active catalysts for the Suzuki–Miyaura reaction between bromobenzene and phenylboronic acid (95% yield with 100 ppm Pd) and for the Sonogashira reaction between phenyl acetylene and iodobenzene. CuNPs reported using this method were more efficient “click” catalysts as Cu2ONPs, and these NPs were used in organometallic “click” synthesis and Sonogashira co-catalysis. For the latter PdNP-catalyzed reaction, the yield was slightly improved in the presence of supported Cu2ONP on SBA-15 (90% vs. 81%). Supporting the PdNP catalyst on SBA-15 even proceeded without a large NP size change, provided improved reaction yields and afforded several recycling cycles without significant Pd leaching.
- 21 April 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 53 (39) , 5384-5387
Exposure to air boosts CuAAC reactions catalyzed by PEG-stabilized Cu nanoparticles
The catalytic activity of Cu(0) NPs is boosted upon aerobic oxidation, forming Cu2O NPs, and further improved on an SBA-15 support.
- 21 April 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 53 (39) , 5384-5387
Exposure to air boosts CuAAC reactions catalyzed by PEG-stabilized Cu nanoparticles
The catalytic activity of Cu(0) NPs is boosted upon aerobic oxidation, forming Cu2O NPs, and further improved on an SBA-15 support.