Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Constantinos D. Zeinalipour-Yazdi has a total of 71 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sphere-in-contact model for the development of new graphite-based intercalated battery materials

    by Jonathan Kae, Constantinos D. Zeinalipour-Yazdi

    We apply the sphere-in-contact model/theorem to the crystallographic analysis of graphite intercalation compounds (GICs), using a unit cell description based on the AαAα stacking of two graphene layers.

  • Open Access

    A DFT Study of the Reaction Products/Mechanism in Plasma-Assisted Ammonia Synthesis from Water and Nitrogen and Their Infrared Analysis

    by Constantinos D. Zeinalipour-Yazdi, Xinyan Wang

    This paper presents a thorough investigation of potential reaction products when water and nitrogen react in the gas phase and a reaction mechanism is proposed. We present thermochemistry and simulated infrared (IR) spectroscopy of reactions involved in the synthesis of ammonia (NH3), hydrazine (N2H4), and some new ammonia-based molecules (NH2OOH, ONH2OH) from water (H2O) and nitrogen gas (N2). The production of ammonia and hydrazine is of significant interest because of their essential roles as chemical feedstocks, propellants, and potential clean energy carriers. However, the underlying chemical processes and their energy requirements have not been fully explored, especially considering the environmental effects of their use as fuels in internal combustion engines (ICE). We find that there are 6 different reaction products that may be formed during the ammonia synthesis from N2 and H2O, which include ammonia, hydrazine, hydroxylamine (NH2OH), ammonia oxide (NH3+–O–), and two forms of hydroxylamine oxide (NH2OOH, ONH2OH), and the latter chemical species have not been previously reported or synthesized. The partially oxidized products of ammonia have similar formation energies to those of ammonia, which suggests that they could be produced during the plasma-assisted synthesis. Our simulated infrared spectra can help in the identification and characterization of ammonia synthesis products.

  • Open Access

    Geometry of the Adsorption Sites in Metal Nanoparticles and Surfaces

    by Constantinos D. Zeinalipour-Yazdi

    Despite decades of surface science research, there is a lack of an universal approach to define the adsorption geometry in catalysis on metal nanoparticles and surfaces. The unified framework introduced in this work allows the comparison of binding sites across different facets and particle-size metals, including stepped surfaces, adatoms and surface vacancies. In this study, we identify 18 adsorption sites on metal nanoparticles and surfaces that have either a face-centred cubic (FCC) or hexagonal close-packed (HCP) structure. Most metals in the periodic table have these structures and we determined the adsorption site geometry on a nanoparticle using a geometric approach with physical magnetic ball-and-stick models. These geometric models include the existence of an octahedral or tetrahedral hole beneath the adsorption site, as these can affect the adsorption site strengths of adsorbates. Furthermore, these adsorption sites are a combination of three-fold hollows and four-fold hollows, which are adsorption sites known to activate diatomic molecules (e.g., N2 and CO). In addition, adsorption of large-molecular-weight adsorbates can be defined on these sites as they provide multiple contact points in contrast to the typical four-fold hollow, three-fold hollow, and bridge and atop adsorption sites used in heterogeneous catalysis. We find that there are nine geometrically distinct adsorption site topologies composed of square (i.e., 100) and triangular (i.e., 111) motifs. These adsorption site topologies, when combined with a characteristic zeta angle (ζ), result in 18 distinct adsorption site geometries that can be found on metal nanoparticles and surfaces. A systematic naming system for these adsorption sites is provided that defines the adsorption site geometry explicitly. Using this approach, we find that there are five different types of B5 sites, an adsorption site that has been previously found to activate dinitrogen on ruthenium for the ammonia synthesis reaction.

  • Two-dimensional copper (II) coordination polymer with antimicrobial and DNA-cleavage activity

    by Maryam Aghaee, Khosro Mohammadi, Payam Hayati, Jan Janczak, Constantinos D. Zeinalipour-Yazdi, Reza Naghiha

  • Open Access

    Sphere-in-Contact Model/Theorem for the Development of New Graphite-Based Intercalated Battery Materials

    by Jonathan Kae, Constantinos D. Zeinalipour-Yazdi

    In this study we show that on the basis of simple crystallographic rules applied to the sphere-in-contact model/theorem that we can predict that under ambient conditions of pressure and temperature that the most dense and stable form of lithium in GICs is LiC6 and that two distinct form of LiC8 are possible. We find that other empirical formulas such as MC2, MC3 and M3C8 are possible based on crystallography, but not stable based on intercalate repulsions. The results are based on the unit cell description of GICs with the sphere-in-contact model/theorem that is used to model the intercalation of an arbitrary atom within the AαAα stacking1 of two graphene layers in GICs. We calculate the density and the packing fraction of these materials. This approach offers a simple description of the structure of GICs in which the unit cell can be defined and the diffusion of ions can be estimated on the basis of the void space in these materials. We anticipate that this simple description of GIC will be useful for the rational design of new graphite-based materials that can find use in various energy storage applications such as ion-based batteries but also as an educational tool in which university level education in materials and surface chemistry is directly connected to basic laws in chemistry, physics and mathematics.

  • Open Access

    Accurate Density Determination of Various Natural Stones Employing Archimedes’ Principle and a New Non-Destructive Liquid Pycnometer for Solids

    by Eriketi Loizidou, Deepshikha Deepshikha, Constantinos D. Zeinalipour-Yazdi

    In this study we explore various non-destructive methods for the determination of density of 27 non-porous natural stones. Among the methods investigated the most accurate method was found to be the mass-based suspension method that uses Archimedes principle, with costs of equipment less than 20$. We have used this density measurement method to measure densities of natural stones and copper reference cube in the range of 1.07 – 8.93 g × cm-3, for stones that have volumes less than 16.4 cm3. The measurement are in excellent agreement with more precise methods that use a 4 decimal place analytical balance. The measurement uncertainty of the method was assessed with a Cu density reference cube and was found to be of the order of 0.1% in measuring the volume of stones with arbitrary shape. Finally, we provide details of the design features of a new liquid-based pycnometer that can measure the density of irregular shape natural stones without the need to form a powder. This pycnometer can also be used to measure density changes in liquids as a function of temperature and solute concentration.

  • Open Access

    Adsorption and Stability of Monoatomic Adsorbate Adlayers on FCC and HCP Metals Using the Sphere-in-Contact Model

    by Constantinos D. Zeinalipour-Yazdi

    In this paper, we show that the sphere-in-contact model can predict long-range surface adsorption phenomena based on adsorbate-adsorbate repulsions and their geometric distance, assuming that their negative surface-induced charge is smeared on the surface of the adsorbate atoms. Additionally, it can be used to model collective surface diffusion mechanisms such as the domino-type surface diffusion of adsorbate rows on close-packed metal HCP and FCC surfaces. We have recently shown that the sphere-in-contact model can be used as an educational and research tool in various contexts, such as the visualization of carbon structures (e.g., graphene, carbon nanotubes, carbon nanocones, and graphite), heterogeneous catalysts, metal nanoparticles, and organic molecules. Here we present how it can be used to model the adsorbate structure of monoatomic elements on the hexagonal close-packed surface of HCP and FCC metals to study long-range ordering phenomena of monoatomic adsorbates on metals. We have used atoms of varying radius and color to represent the metal surface atoms and the adsorbate atoms. The study reveals that many surface configurations are possible for a fixed adsorbate coverage (θ) by the movement of the adsorbate atoms in response to surface adsorbate-adsorbate repulsions. The movement of the particles (e.g., particle diffusion) can be seen directly in the model, and this is caused by the user intervention. This has great educational and research value, as one can directly see how the adsorbate atoms reorder on the surface of a metal and therefore study diffusion mechanisms. We calculate the repulsive interaction energy of adsorbates using the sphere-in-contact model and can identify which surface-adsorbed configuration is the lowest energy. We find that at a surface coverage of 1/3 (0.333 ML), the most stable adsorbate configuration places adsorbates at the third nearest neighbor 3-fold hollow sites, forming a hexagonal pattern. We find that this model will be useful in the rational design of catalytic materials and material coatings with new technological applications where long-range ordering of surface adsorbates is essential and adsorbate interactions are mainly repulsive interatomic interactions.


  • Open Access

    Advances in the Synthesis of Carbon Nanomaterials Towards Their Application in Biomedical Engineering and Medicine

    by Numair Elahi, Constantinos D. Zeinalipour-Yazdi

    Carbon nanomaterials that include different forms such as graphene, carbon nanotubes, fullerenes, graphite, nanodiamonds, carbon nanocones, amorphous carbon, as well as porous carbon, are quite distinguished by their unique structural, electrical, and mechanical properties. This plays a major role in making them pivotal in various medical applications. The synthesis methods used for such nanomaterials, including techniques such as chemical vapor deposition (CVD), arc discharge, laser ablation, and plasma-enhanced chemical vapor deposition (PECVD), are able to offer very precise control over material purity, particle size, and scalability, enabling for nanomaterials catered for different specific applications. These materials have been explored in a range of different systems, which include drug-delivery systems, biosensors, tissue engineering, as well as advanced imaging techniques such as MRI and fluorescence imaging. Recent advancements, including green synthesis strategies and novel innovative approaches like ultrasonic cavitation, have improved both the precision as well as the scalability of carbon nanomaterial production. Despite challenges like biocompatibility and environmental concerns, these nanomaterials hold immense promise in revolutionizing personalized medicine, diagnostics, and regenerative therapies. Many of these applications are currently positioned at Technology Readiness Levels (TRLs) 3–4, with some systems advancing toward preclinical validation, highlighting their emerging translational potential in clinical settings. This review is specific in evaluating synthesis techniques of different carbon nanomaterials and establishing their modified properties for use in biomedicine. It focuses on how these techniques establish biocompatibility, scalability, and performance for use in medicines such as drug delivery, imaging, and tissue engineering. The implications of nanostructure behavior in biological environments are further discussed, with emphasis on applications in imaging, drug delivery, and biosensing.


  • Theoretical investigation of functionalized diamond-like carbon with COOH, OH and NH2: a comprehensive DFT-D study

    by Nawal Brahimi, Hayet Moumeni, Abderrafik Nemamcha, Ines Boudjahem, Constantinos D. Zeinalipour-Yazdi


  • Open Access

    A Study of the Adsorption of Monoatomic Adsorbate Adlayers on FCC and HCP Metals Using the Sphere-in-Contact Model

    by Constantinos D. Zeinalipour-Yazdi

    We have recently shown that the sphere-in-contact model can be used as an educational and research tool in various contexts, such as the visualization of carbon structures (e.g. graphene, carbon nanotubes, carbon nanocones and graphite), heterogeneous catalysts, metal nanoparticles and organic molecules. In this study we present how it can be used to model the adsorbate structure of a monoatomic elements on the hexagonal close-packed surface of HCP and FCC metals to study long range ordering phenomena of monoatomic adsorbates on metals. We have used atoms of varying radius and colour to represent the metal surface atoms and the adsorbate atoms. The study reveals that many surface configurations are possible for a fixed adsorbate coverage (θ) by the movement of the adsorbate atoms in response to surface adsorbate-adsorbate repulsions. The movement of the particles (e.g. particle diffusion) can be seen directly in the model and this is caused by the user intervention. This has great educational but also research value as one can directly see how the adsorbate atoms reorder on the surface of a metal. We calculate the repulsive interaction energy of adsorbates using the sphere-in-contact model and are able to identify which surface adsorbed configuration is the lowest energy one. We find that this model will be useful in the rational design of catalytic materials and materials coatings with new technological applications where long range ordering of surface adsorbates is essential.