Elvera Logie Viljoen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Elvera Logie Viljoen has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Eric van Steen
University of Cape Town (UCT)
5 shared publications - Michael Claeys
University of Cape Town
4 shared publications - Saheed Olalekan Sanni
College of Chemical Engineering Sichuan University of Science & Engineering Zigong China
4 shared publications - Augustine Enakpodia Ofomaja
Vaal University of Technology
2 shared publications - Hendrik Gideon Brink
Department of Chemical Engineering, University of Pretoria, Pretoria 0002, South Africa
2 shared publications A.E. Ofomaja
1 shared publication
Latest Publications
- Open Access
- 14 March 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (6) , 958
One-Step Green Synthesis of Water-Soluble Fluorescent Carbon Dots and Its Application in the Detection of Cu2+
Renewable biowaste-derived carbon dots have garnered immense interest owing to their exceptional optical, fluorescence, chemical, and environmentally friendly attributes, which have been exploited for the detection of metals, non-metals, and organics in the environment. In the present study, water-soluble fluorescent carbon dots (CDs) were synthesized via facile green microwave pyrolysis of pine-cone biomass as precursors, without any chemical additives. The synthesized fluorescent pine-cone carbon dots (PC-CDs) were spherical in shape with a bimodal particle-size distribution (average diameters of 15.2 nm and 42.1 nm) and a broad absorption band of between 280 and 350 nm, attributed to a π-π* and n-π* transition. The synthesized PC-CDs exhibited the highest fluorescent (FL) intensity at an excitation wavelength of 360 nm, with maximum emission of 430 nm. The synthesized PC-CDs were an excellent fluorescent probe for the selective detection of Cu2+ in aqueous solution, amidst the presence of other metal ions. The FL intensity of PC-CDs was exceptionally quenched in the presence of Cu2+ ions, with a low detection limit of 0.005 μg/mL; this was largely ascribed to Cu2+ ion binding interactions with the enriched surface functional groups on the PC-CDs. As-synthesized PC-CDs are an excellent, cost effective, and sensitive probe for detecting and monitoring Cu2+ metal ions in wastewater.
- 14 March 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (6) , 958
Open AccessOne-Step Green Synthesis of Water-Soluble Fluorescent Carbon Dots and Its Application in the Detection of Cu2+
Renewable biowaste-derived carbon dots have garnered immense interest owing to their exceptional optical, fluorescence, chemical, and environmentally friendly attributes, which have been exploited for the detection of metals, non-metals, and organics in the environment. In the present study, water-soluble fluorescent carbon dots (CDs) were synthesized via facile green microwave pyrolysis of pine-cone biomass as precursors, without any chemical additives. The synthesized fluorescent pine-cone carbon dots (PC-CDs) were spherical in shape with a bimodal particle-size distribution (average diameters of 15.2 nm and 42.1 nm) and a broad absorption band of between 280 and 350 nm, attributed to a π-π* and n-π* transition. The synthesized PC-CDs exhibited the highest fluorescent (FL) intensity at an excitation wavelength of 360 nm, with maximum emission of 430 nm. The synthesized PC-CDs were an excellent fluorescent probe for the selective detection of Cu2+ in aqueous solution, amidst the presence of other metal ions. The FL intensity of PC-CDs was exceptionally quenched in the presence of Cu2+ ions, with a low detection limit of 0.005 μg/mL; this was largely ascribed to Cu2+ ion binding interactions with the enriched surface functional groups on the PC-CDs. As-synthesized PC-CDs are an excellent, cost effective, and sensitive probe for detecting and monitoring Cu2+ metal ions in wastewater.
- Open Access
Influence of Synthesis Approach on Controlled Microstructures and Photocatalytic Properties of Ag/AgBr-Activated Carbon Composites on Visible Light Degradation of Tetracycline
The influence of the synthesis approach (thermal polyol and deposition–precipitation) regarding the dispersion of Ag/AgBr nanoparticles dispersed on activated carbon prepared from chemical impregnated pinecone (TP-AABR-ACK, and DP-AABR-ACK) was studied, to increase their photocatalytic efficiency on the degradation of tetracycline (TC). The physicochemical characterization evidenced the significance of the ACK catalyst promoter in enhancing controlled microstructures (morphologies and particle size distributions), synergistic interface interaction between AABR NPs and the carbonaceous support, and efficient photogenerated charge carriers separation within TP-AABR-ACK, and DP-AABR-ACK composites. The results revealed 92% removal of TC within 180 min under the LED visible light irradiation, which was achieved using TP-AABR-ACK when compared to DP-AABR-ACK composite and other catalysts in this study. Such superior results achieved with TP-AABR-ACK composite were attributed to controlled morphologies, reduced particle size and agglomeration, improved absorptivity, and superior cooperative effect between the AABR and ACK catalyst promoter as evidenced from SEM, EDX, TEM, UV-DRS, and electrochemical characterizations, respectively. Furthermore, enhanced TOC removal and abundance of reactive superoxide anion generation were achieved with the TP-AABR-ACK composite in this study.
Open AccessInfluence of Synthesis Approach on Controlled Microstructures and Photocatalytic Properties of Ag/AgBr-Activated Carbon Composites on Visible Light Degradation of Tetracycline
The influence of the synthesis approach (thermal polyol and deposition–precipitation) regarding the dispersion of Ag/AgBr nanoparticles dispersed on activated carbon prepared from chemical impregnated pinecone (TP-AABR-ACK, and DP-AABR-ACK) was studied, to increase their photocatalytic efficiency on the degradation of tetracycline (TC). The physicochemical characterization evidenced the significance of the ACK catalyst promoter in enhancing controlled microstructures (morphologies and particle size distributions), synergistic interface interaction between AABR NPs and the carbonaceous support, and efficient photogenerated charge carriers separation within TP-AABR-ACK, and DP-AABR-ACK composites. The results revealed 92% removal of TC within 180 min under the LED visible light irradiation, which was achieved using TP-AABR-ACK when compared to DP-AABR-ACK composite and other catalysts in this study. Such superior results achieved with TP-AABR-ACK composite were attributed to controlled morphologies, reduced particle size and agglomeration, improved absorptivity, and superior cooperative effect between the AABR and ACK catalyst promoter as evidenced from SEM, EDX, TEM, UV-DRS, and electrochemical characterizations, respectively. Furthermore, enhanced TOC removal and abundance of reactive superoxide anion generation were achieved with the TP-AABR-ACK composite in this study.
- 5 October 2020
- Published by HARD Publishing Company in Polish Journal of Environmental Studies
- Vol. 30 (1) , 393-400
Size Control of Cobalt Oxide Nanoparticles and Its Effect on the Fenton Catalytic Activity
Cobalt oxide nanoparticles were prepared using a precipitation-oxidation method at mild reaction conditions. The nanoparticles had spherical shapes and sizes that ranged from 4.6 nm to 19.4 nm as determined by TEM and XRD. XRD indicated that the nanoparticles consisted only of the Co3O4 phase. The nanoparticles’ size was controlled using different amounts of the oxidant, hydrogen peroxide. The size was controlled in the absence of capping molecules. The yield increased with an increase in the amount of hydrogen peroxide used. The cobalt oxide nanoparticles were used as catalyst for the Fenton reaction to degrade methylene blue dye by hydrogen peroxide oxidation. The catalytic activity increased with a decrease in particle size. A percentage degradation of 99 % in 30 minutes was obtained when the 4.6 nm sized nanoparticles was used as catalyst. No significant methylene blue degradation was observed in the absence of the catalyst.
- 5 October 2020
- Published by HARD Publishing Company in Polish Journal of Environmental Studies
- Vol. 30 (1) , 393-400
Size Control of Cobalt Oxide Nanoparticles and Its Effect on the Fenton Catalytic Activity
Cobalt oxide nanoparticles were prepared using a precipitation-oxidation method at mild reaction conditions. The nanoparticles had spherical shapes and sizes that ranged from 4.6 nm to 19.4 nm as determined by TEM and XRD. XRD indicated that the nanoparticles consisted only of the Co3O4 phase. The nanoparticles’ size was controlled using different amounts of the oxidant, hydrogen peroxide. The size was controlled in the absence of capping molecules. The yield increased with an increase in the amount of hydrogen peroxide used. The cobalt oxide nanoparticles were used as catalyst for the Fenton reaction to degrade methylene blue dye by hydrogen peroxide oxidation. The catalytic activity increased with a decrease in particle size. A percentage degradation of 99 % in 30 minutes was obtained when the 4.6 nm sized nanoparticles was used as catalyst. No significant methylene blue degradation was observed in the absence of the catalyst.
- 1 July 2019
- Published by Springer Nature in Catalysis Letters
- Vol. 149 (11) , 3027-3040
Accelerated Electron Transport and Improved Photocatalytic Activity of Ag/AgBr Under Visible Light Irradiation Based on Conductive Carbon Derived Biomass
- 1 July 2019
- Published by Springer Nature in Catalysis Letters
- Vol. 149 (11) , 3027-3040
Accelerated Electron Transport and Improved Photocatalytic Activity of Ag/AgBr Under Visible Light Irradiation Based on Conductive Carbon Derived Biomass
- 1 December 2017
- Published by Elsevier in Solid State Sciences
- Vol. 74, 118-124
Photocatalytic application of Pd-ZnO-exfoliated graphite nanocomposite for the enhanced removal of acid orange 7 dye in water
- 1 December 2017
- Published by Elsevier in Solid State Sciences
- Vol. 74, 118-124
Photocatalytic application of Pd-ZnO-exfoliated graphite nanocomposite for the enhanced removal of acid orange 7 dye in water
- Open Access
- 10 July 2017
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 36 (1-2) , 713-731
Macadamia nutshells-derived activated carbon and attapulgite clay combination for synergistic removal of Cr(VI) and Cr(III)
A physical mixture of Macadamia-derived activated carbon and cationic attapulgite clay was investigated for total chromium removal in aqueous solution. The parameters influencing the adsorption of chromium on the sorbents were investigated, and it was shown that pH 3, contact time 2 hours, concentration 50 mg L−1 and calculated adsorption capacity of 96.28 mg g−1 were the optimal parameters. The process of adsorption was better described by Freundlich adsorption isotherm, and the kinetic modelling data suggested a chemisorption mechanism described by pseudo-second-order (PSO) rate model. Ionic strength studies demonstrated that the removal of anionic Cr(VI) species was mostly affected by the presence of anions like Cl− and [ ], while the removal of the cationic Cr(III) species was affected largely by cations [ ]>Na+>K+. Overall, the removal mechanism involved adsorption, reduction and ion exchange processes.
- 10 July 2017
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 36 (1-2) , 713-731
Open AccessMacadamia nutshells-derived activated carbon and attapulgite clay combination for synergistic removal of Cr(VI) and Cr(III)
A physical mixture of Macadamia-derived activated carbon and cationic attapulgite clay was investigated for total chromium removal in aqueous solution. The parameters influencing the adsorption of chromium on the sorbents were investigated, and it was shown that pH 3, contact time 2 hours, concentration 50 mg L−1 and calculated adsorption capacity of 96.28 mg g−1 were the optimal parameters. The process of adsorption was better described by Freundlich adsorption isotherm, and the kinetic modelling data suggested a chemisorption mechanism described by pseudo-second-order (PSO) rate model. Ionic strength studies demonstrated that the removal of anionic Cr(VI) species was mostly affected by the presence of anions like Cl− and [ ], while the removal of the cationic Cr(III) species was affected largely by cations [ ]>Na+>K+. Overall, the removal mechanism involved adsorption, reduction and ion exchange processes.
- 25 September 2009
- Published by Springer Nature in Catalysis Letters
- Vol. 133 (1-2) , 8-13
Rate of Oxidation of a Cobalt Catalyst in Water and Water/Hydrogen Mixtures: Influence of Platinum as a Reduction Promoter
- 25 September 2009
- Published by Springer Nature in Catalysis Letters
- Vol. 133 (1-2) , 8-13
Rate of Oxidation of a Cobalt Catalyst in Water and Water/Hydrogen Mixtures: Influence of Platinum as a Reduction Promoter
- 1 February 2008
- Published by Elsevier in Applied Catalysis A: General
- Vol. 335 (1) , 56-63
Evaluation of molybdenum-modified alumina support materials for Co-based Fischer-Tropsch catalysts
- 1 February 2008
- Published by Elsevier in Applied Catalysis A: General
- Vol. 335 (1) , 56-63
Evaluation of molybdenum-modified alumina support materials for Co-based Fischer-Tropsch catalysts
- 1 April 2007
- Published by Elsevier in Journal of Molecular Catalysis A: Chemical
- Vol. 266 (1-2) , 254-259
A DFT-study on the acidity of Mo–O–Al-clusters
- 1 April 2007
- Published by Elsevier in Journal of Molecular Catalysis A: Chemical
- Vol. 266 (1-2) , 254-259
A DFT-study on the acidity of Mo–O–Al-clusters