Craig Combe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Craig Combe has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Iain McCulloch
Department of Chemistry Chemistry Research Laboratory University of Oxford Oxford UK
8 shared publications - Hasina Harimino Ramanitra
CNRS/Univ Pau & Pays Adour Institut des Science Analytiques et Physico‐Chimie pour l'Environnement et les Materiaux Pau France
3 shared publications - Hugo Santos Silva
Université de Pau et des Pays de l'Adour (UPPA)
3 shared publications - Roger C. Hiorns
Institut des Sciences Analytiques et Physico‐Chimie pour l'Environnement et les Materiaux CNRS/Univ Pau & Pays Adour Pau France
3 shared publications - Andreas Distler
Institute of Materials for Electronics and Energy Technology (i‐MEET) Friedrich‐Alexander‐Universität Erlangen‐Nürnberg Erlangen Germany
2 shared publications Bob C. Schroeder
Department of Chemistry, Imperial College, London, UK
2 shared publications
Latest Publications
- 19 November 2021
- Published by Wiley in Angewandte Chemie
- Vol. 134 (7)
Lactone Backbone Density in Rigid Electron‐Deficient Semiconducting Polymers Enabling High n‐type Organic Thermoelectric Performance
Three lactone‐based rigid semiconducting polymers were designed to overcome major limitations in the development of n‐type organic thermoelectrics, namely electrical conductivity and air stability. Experimental and theoretical investigations demonstrated that increasing the lactone group density by increasing the benzene content from 0 % benzene (P‐0), to 50 % (P‐50), and 75 % (P‐75) resulted in progressively larger electron affinities (up to 4.37 eV), suggesting a more favorable doping process, when employing (N‐DMBI) as the dopant. Larger polaron delocalization was also evident, due to the more planarized conformation, which is proposed to lead to a lower hopping energy barrier. As a consequence, the electrical conductivity increased by three orders of magnitude, to achieve values of up to 12 S cm and Power factors of 13.2 μWm−1 K−2were thereby enabled. These findings present new insights into material design guidelines for the future development of air stable n‐type organic thermoelectrics.
- 19 November 2021
- Published by Wiley in Angewandte Chemie
- Vol. 134 (7)
Lactone Backbone Density in Rigid Electron‐Deficient Semiconducting Polymers Enabling High n‐type Organic Thermoelectric Performance
Three lactone‐based rigid semiconducting polymers were designed to overcome major limitations in the development of n‐type organic thermoelectrics, namely electrical conductivity and air stability. Experimental and theoretical investigations demonstrated that increasing the lactone group density by increasing the benzene content from 0 % benzene (P‐0), to 50 % (P‐50), and 75 % (P‐75) resulted in progressively larger electron affinities (up to 4.37 eV), suggesting a more favorable doping process, when employing (N‐DMBI) as the dopant. Larger polaron delocalization was also evident, due to the more planarized conformation, which is proposed to lead to a lower hopping energy barrier. As a consequence, the electrical conductivity increased by three orders of magnitude, to achieve values of up to 12 S cm and Power factors of 13.2 μWm−1 K−2were thereby enabled. These findings present new insights into material design guidelines for the future development of air stable n‐type organic thermoelectrics.
- 19 November 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (7) , e202113078
Lactone Backbone Density in Rigid Electron‐Deficient Semiconducting Polymers Enabling High n‐type Organic Thermoelectric Performance
Three lactone‐based rigid semiconducting polymers were designed to overcome major limitations in the development of n‐type organic thermoelectrics, namely electrical conductivity and air stability. Experimental and theoretical investigations demonstrated that increasing the lactone group density by increasing the benzene content from 0 % benzene (P‐0), to 50 % (P‐50), and 75 % (P‐75) resulted in progressively larger electron affinities (up to 4.37 eV), suggesting a more favorable doping process, when employing (N‐DMBI) as the dopant. Larger polaron delocalization was also evident, due to the more planarized conformation, which is proposed to lead to a lower hopping energy barrier. As a consequence, the electrical conductivity increased by three orders of magnitude, to achieve values of up to 12 S cm and Power factors of 13.2 μWm−1 K−2were thereby enabled. These findings present new insights into material design guidelines for the future development of air stable n‐type organic thermoelectrics.
- 19 November 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (7) , e202113078
Lactone Backbone Density in Rigid Electron‐Deficient Semiconducting Polymers Enabling High n‐type Organic Thermoelectric Performance
Three lactone‐based rigid semiconducting polymers were designed to overcome major limitations in the development of n‐type organic thermoelectrics, namely electrical conductivity and air stability. Experimental and theoretical investigations demonstrated that increasing the lactone group density by increasing the benzene content from 0 % benzene (P‐0), to 50 % (P‐50), and 75 % (P‐75) resulted in progressively larger electron affinities (up to 4.37 eV), suggesting a more favorable doping process, when employing (N‐DMBI) as the dopant. Larger polaron delocalization was also evident, due to the more planarized conformation, which is proposed to lead to a lower hopping energy barrier. As a consequence, the electrical conductivity increased by three orders of magnitude, to achieve values of up to 12 S cm and Power factors of 13.2 μWm−1 K−2were thereby enabled. These findings present new insights into material design guidelines for the future development of air stable n‐type organic thermoelectrics.
- 6 March 2020
- Published by Wiley in Advanced Materials Technologies
- Vol. 5 (5) , 1901122
Pulse Oximetry Using Organic Optoelectronics under Ambient Light
Light absorption in oxygenated and deoxygenated blood varies appreciably over the visible and near‐infrared spectrum. Pulse oximeters use two distinct wavelengths of light to measure oxygen saturation SpO2 of blood. Currently, light‐emitting diodes (LEDs) are used in oximeters, which need additional components to drive them and negatively impact the overall size of the sensor. In this work, an ambient light oximeter (ALO) is demonstrated, which can measure photoplethysmography signals and SpO2 using various kinds of ambient light, avoiding the use of LEDs. Spectral filters are combined with organic photodiodes to create the ALO with sensitivity peaks at green (525 nm), red (610 nm), and near‐infrared (740 nm) wavelengths. Finally, the wearable ALO is used to measure photoplethysmography signals and SpO2 on the index finger in different indoor and outdoor lighting conditions and the measurements are validated with commercial pulse oximeters under normal and ischemic conditions.
- 6 March 2020
- Published by Wiley in Advanced Materials Technologies
- Vol. 5 (5) , 1901122
Pulse Oximetry Using Organic Optoelectronics under Ambient Light
Light absorption in oxygenated and deoxygenated blood varies appreciably over the visible and near‐infrared spectrum. Pulse oximeters use two distinct wavelengths of light to measure oxygen saturation SpO2 of blood. Currently, light‐emitting diodes (LEDs) are used in oximeters, which need additional components to drive them and negatively impact the overall size of the sensor. In this work, an ambient light oximeter (ALO) is demonstrated, which can measure photoplethysmography signals and SpO2 using various kinds of ambient light, avoiding the use of LEDs. Spectral filters are combined with organic photodiodes to create the ALO with sensitivity peaks at green (525 nm), red (610 nm), and near‐infrared (740 nm) wavelengths. Finally, the wearable ALO is used to measure photoplethysmography signals and SpO2 on the index finger in different indoor and outdoor lighting conditions and the measurements are validated with commercial pulse oximeters under normal and ischemic conditions.
- 25 August 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (44)
Membrane‐Free Detection of Metal Cations with an Organic Electrochemical Transistor
Alkali‐metal ions, particularly sodium (Na+) and potassium (K+), are the messengers of living cells, governing a cascade of physiological processes through the action of ion channels. Devices that can monitor, in real time, the concentrations of these cations in aqueous media are in demand not only for the study of cellular machinery, but also to detect conditions in the human body that lead to electrolyte imbalance. In this work, conducting polymers are developed that respond rapidly and selectively to varying concentrations of Na+ and K+ in aqueous media. These polymer films, bearing crown‐ether‐functionalized thiophene units specific to either Na+ or K+, generate an electrical output proportional to the cation type and concentration. Using electropolymerization, the ion‐selective polymers are integrated as the gate electrode of an organic electrochemical transistor (OECT). The OECT current changes with respect to the concentration of the ion to which the polymer electrode is selective. Designed as a single, miniaturized chip, the OECT enables the selective detection of the cations within a physiologically relevant range. These electrochemical ion sensors require neither ion‐selective membranes nor a reference electrode to operate and have the potential to surpass existing technologies for the detection of alkali‐metal ions in aqueous media.
- 25 August 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (44)
Membrane‐Free Detection of Metal Cations with an Organic Electrochemical Transistor
Alkali‐metal ions, particularly sodium (Na+) and potassium (K+), are the messengers of living cells, governing a cascade of physiological processes through the action of ion channels. Devices that can monitor, in real time, the concentrations of these cations in aqueous media are in demand not only for the study of cellular machinery, but also to detect conditions in the human body that lead to electrolyte imbalance. In this work, conducting polymers are developed that respond rapidly and selectively to varying concentrations of Na+ and K+ in aqueous media. These polymer films, bearing crown‐ether‐functionalized thiophene units specific to either Na+ or K+, generate an electrical output proportional to the cation type and concentration. Using electropolymerization, the ion‐selective polymers are integrated as the gate electrode of an organic electrochemical transistor (OECT). The OECT current changes with respect to the concentration of the ion to which the polymer electrode is selective. Designed as a single, miniaturized chip, the OECT enables the selective detection of the cations within a physiologically relevant range. These electrochemical ion sensors require neither ion‐selective membranes nor a reference electrode to operate and have the potential to surpass existing technologies for the detection of alkali‐metal ions in aqueous media.
- 7 February 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (13)
A 0D Lead‐Free Hybrid Crystal with Ultralow Thermal Conductivity
Organic–inorganic hybrid materials are of significant interest owing to their diverse applications ranging from photovoltaics and electronics to catalysis. Control over the organic and inorganic components offers flexibility through tuning their chemical and physical properties. Herein, it is reported that a new organic–inorganic hybrid, [Mn(C2H6OS)6]I4, with linear tetraiodide anions exhibit an ultralow thermal conductivity of 0.15 ± 0.01 W m−1 K−1 at room temperature, which is among the lowest values reported for organic–inorganic hybrid materials. Interestingly, the hybrid compound has a unique 0D structure, which extends into 3D supramolecular frameworks through nonclassical hydrogen bonding. Phonon band structure calculations reveal that low group velocities and localization of vibrational energy underlie the observed ultralow thermal conductivity, which could serve as a general principle to design novel thermal management materials.
- 7 February 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (13)
A 0D Lead‐Free Hybrid Crystal with Ultralow Thermal Conductivity
Organic–inorganic hybrid materials are of significant interest owing to their diverse applications ranging from photovoltaics and electronics to catalysis. Control over the organic and inorganic components offers flexibility through tuning their chemical and physical properties. Herein, it is reported that a new organic–inorganic hybrid, [Mn(C2H6OS)6]I4, with linear tetraiodide anions exhibit an ultralow thermal conductivity of 0.15 ± 0.01 W m−1 K−1 at room temperature, which is among the lowest values reported for organic–inorganic hybrid materials. Interestingly, the hybrid compound has a unique 0D structure, which extends into 3D supramolecular frameworks through nonclassical hydrogen bonding. Phonon band structure calculations reveal that low group velocities and localization of vibrational energy underlie the observed ultralow thermal conductivity, which could serve as a general principle to design novel thermal management materials.
- 17 August 2018
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 30 (17) , 6164-6172
Improving the Compatibility of Diketopyrrolopyrrole Semiconducting Polymers for Biological Interfacing by Lysine Attachment
- 17 August 2018
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 30 (17) , 6164-6172
Improving the Compatibility of Diketopyrrolopyrrole Semiconducting Polymers for Biological Interfacing by Lysine Attachment
- 23 June 2017
- Published by Wiley in Polymer International
- Vol. 66 (10) , 1364-1371
Towards the synthesis of poly(azafulleroid)s: main chain fullerene oligomers for organic photovoltaic devices
For the first time, imino chemistry is explored for the synthesis of main chain fullerene oligomers and low‐molecular‐weight polymers. Oligo(aziridinofullerene)s and low‐molecular‐weight poly(aziridinofullerene)s (PAFs) are prepared by 1,3‐dipolar cycloadditions of bis(azidoalkyl) comonomers to C60. The effect of the steric bulk of the comonomer is studied and it is found that PAF solubilities and molecular weights are increased with longer comonomer side‐chains. Initial and promising photovoltaic characterizations show commensurate improvements in properties. Interestingly, the PAFs exhibit lowest unoccupied molecular orbitals close to those of phenyl‐C61‐butyric acid methyl ester. Routine characterizations are correlated with DFT/B3LYP/6‐31G(d) to understand structural and electronic behaviours. It is expected that higher molecular weights may be obtained through comonomer variations and that this novel methodology will open a route to interesting materials for optoelectronics. © 2017 Society of Chemical Industry
- 23 June 2017
- Published by Wiley in Polymer International
- Vol. 66 (10) , 1364-1371
Towards the synthesis of poly(azafulleroid)s: main chain fullerene oligomers for organic photovoltaic devices
For the first time, imino chemistry is explored for the synthesis of main chain fullerene oligomers and low‐molecular‐weight polymers. Oligo(aziridinofullerene)s and low‐molecular‐weight poly(aziridinofullerene)s (PAFs) are prepared by 1,3‐dipolar cycloadditions of bis(azidoalkyl) comonomers to C60. The effect of the steric bulk of the comonomer is studied and it is found that PAF solubilities and molecular weights are increased with longer comonomer side‐chains. Initial and promising photovoltaic characterizations show commensurate improvements in properties. Interestingly, the PAFs exhibit lowest unoccupied molecular orbitals close to those of phenyl‐C61‐butyric acid methyl ester. Routine characterizations are correlated with DFT/B3LYP/6‐31G(d) to understand structural and electronic behaviours. It is expected that higher molecular weights may be obtained through comonomer variations and that this novel methodology will open a route to interesting materials for optoelectronics. © 2017 Society of Chemical Industry
- 20 October 2016
- Published by Wiley in Polymer International
- Vol. 66 (3) , 388-398
Main‐chain alternating fullerene and dye oligomers for organic photovoltaics
This work demonstrates for the first time that it is possible to prepare alternating oligomers, containing both dyes and fullerenes in repeating structures, that act as electron acceptors in bulk heterojunction devices. A sterically controlled azomethine ylide cycloaddition polymerization is employed with either C60 or phenyl‐C61‐butyric acid methyl ester (PCBM) and the dye diketopyrrolopyrrole (DPP). The former results in low molecular weights of around 5600 g mol−1, whereas the latter, PCBM, enables the formation of more soluble chains with higher molecular weights of ca 11 200 g mol−1. Remarkably, cyclic voltammetry shows that the incorporation of PCBM into the main‐chain raises the lowest unoccupied molecular orbital by ca 380 meV due to the in‐chain bis‐additions. The observation of the complete quenching of DPP fluorescence by the fullerene moiety, combined with computer modelling studies, indicates both electron and energy transfers between intra‐chain moieties. Proof‐of‐concept devices show low efficiencies most likely due to as‐yet‐unoptimized preparation and structures, but hint at the possibilities of these novel bi‐functionalized, in‐chain fullerenes due to their high Voc of 0.89 V with an example low‐bandgap polymer, KP115, and reasonable charge mobilities of ca 1 × 10−4 cm2 V−1 s−1, making this new class of materials of strong interest for applications. Furthermore, their good thermal stability to above 300 °C and their stabilization of photovoltaic devices against thermal degradation confirm that this new pathway to a wide range of dye/fullerene structures is extremely promising. © 2016 Society of Chemical Industry
- 20 October 2016
- Published by Wiley in Polymer International
- Vol. 66 (3) , 388-398
Main‐chain alternating fullerene and dye oligomers for organic photovoltaics
This work demonstrates for the first time that it is possible to prepare alternating oligomers, containing both dyes and fullerenes in repeating structures, that act as electron acceptors in bulk heterojunction devices. A sterically controlled azomethine ylide cycloaddition polymerization is employed with either C60 or phenyl‐C61‐butyric acid methyl ester (PCBM) and the dye diketopyrrolopyrrole (DPP). The former results in low molecular weights of around 5600 g mol−1, whereas the latter, PCBM, enables the formation of more soluble chains with higher molecular weights of ca 11 200 g mol−1. Remarkably, cyclic voltammetry shows that the incorporation of PCBM into the main‐chain raises the lowest unoccupied molecular orbital by ca 380 meV due to the in‐chain bis‐additions. The observation of the complete quenching of DPP fluorescence by the fullerene moiety, combined with computer modelling studies, indicates both electron and energy transfers between intra‐chain moieties. Proof‐of‐concept devices show low efficiencies most likely due to as‐yet‐unoptimized preparation and structures, but hint at the possibilities of these novel bi‐functionalized, in‐chain fullerenes due to their high Voc of 0.89 V with an example low‐bandgap polymer, KP115, and reasonable charge mobilities of ca 1 × 10−4 cm2 V−1 s−1, making this new class of materials of strong interest for applications. Furthermore, their good thermal stability to above 300 °C and their stabilization of photovoltaic devices against thermal degradation confirm that this new pathway to a wide range of dye/fullerene structures is extremely promising. © 2016 Society of Chemical Industry
- 19 February 2016
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 49 (5) , 1681-1691
Synthesis of Main-Chain Poly(fullerene)s from a Sterically Controlled Azomethine Ylide Cycloaddition Polymerization
- 19 February 2016
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 49 (5) , 1681-1691
Synthesis of Main-Chain Poly(fullerene)s from a Sterically Controlled Azomethine Ylide Cycloaddition Polymerization
- 1 December 2013
- Published by Elsevier in Tetrahedron Letters
- Vol. 54 (50) , 6814-6818
Synthesis and morphology of asymmetric, alkyne-functionalised pentacene and 2-fluoroanthradithiophene
- 1 December 2013
- Published by Elsevier in Tetrahedron Letters
- Vol. 54 (50) , 6814-6818
Synthesis and morphology of asymmetric, alkyne-functionalised pentacene and 2-fluoroanthradithiophene