SZShengli Zhai

Shengli Zhai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Shengli Zhai has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Engineering Hierarchical Graphene Hydrogels for Microbial Fuel Cells

    by Shengli Zhai, Zeyang Zhao, Fei Liu, Li Wei

    Extracellular electron transfer (EET) at the interface between microorganisms and their environment plays a crucial role in bioelectrochemical systems, such as microbial fuel cells (MFCs). Graphene hydrogels (GHs) are promising electrode materials for MFCs, but the relationship between their properties and EET efficiency remains unclear. In this study, we investigated the effects of two key interrelated properties, namely conductivity and biocompatibility, on the EET efficiency and MFC performance of GHs. We observed opposing trends in conductivity and biocompatibility across different GHs, which were prepared by varying the hydrothermal synthesis conditions. Therefore, a trade‐off between these two factors must be considered when designing GHs with high EET efficiency and MFC performance. The optimal synthesis temperature of 180 °C produced GHs that balanced conductivity and biocompatibility, resulting in a maximum power density of 137.67 W m –3 . This study highlights the interaction between GH materials and microorganisms, which depends on the materials’ conductivity and biocompatibility, offering new insights into the design and optimization of materials for bioelectrochemical applications.

  • Multispecies interfacial regulation via keratin-engineered separators for dendrite-free aqueous zinc metal anodes

    by Qinghe Ding, Hengwei Zhang, Chun-Yu Liu, Pengfei Yang, Zeyang Zhao, Jiayi Li, Xinghai Zhou, Shengli Zhai

  • Interfacial ionic and thermal regulation for highly reversible and ultra-reliable zinc-ion batteries

    by Mengcheng Huang, Yaojie Lei, Yajun Hu, Wei-Hong Lai, Yun-Xiao Wang, Chunyu Liu, Shengli Zhai, Guoxiu Wang

    Prevalent glass fiber separators in aqueous Zn-ion batteries (ZIBs) offer inadequate control over interfacial reactions, contributing to the rapid growth of Zn dendrites and aggravated parasitic reactions. Moreover, the stability of ZIBs under extreme operating conditions remains a critical yet often overlooked issue. Here, we present a novel silane-decorated glass fiber separator with engineered physical structures and surface chemistry, facilitating highly reversible and ultra-reliable ZIBs. Silane strengthens the separator, resists stress, and forms heat-insulating char layers under flame, ensuring reliability under extreme conditions. Silane networks also function as fillers that enhance pore uniformity for even Zn2+ flux. The amino groups in silane demonstrate comprehensive management of interfacial anions, cations, water transfer and reaction kinetics. This capability induces Zn2+ to concentrate at the interface, accelerates Zn2+ transfer, reduces deposition barriers, and obstructs water molecules and sulfate ions from participating in parasitic reactions. Consequently, dendrite-free Zn plating/stripping is achieved with 99.4% coulombic efficiency over 250 cycles, stable charge/discharge performance for 7000 hours, and remarkable cycling stability and flame resistance for Zn//V full batteries. This strategy demonstrates versatility across various separator materials and battery chemistry, offering a promising route to more reliable and higher-performing energy storage systems.


  • Tremella-like Mo and N Codoped Graphitic Nanosheets by In Situ Carbonization of Phthalocyanine for Potassium-Ion Battery

    by Kang Li, Jianfeng Zhu, Zhanwei Xu, Qianqian Liu, Shengli Zhai, Na Wang, Xiaoxian Wang, Zhi Li

    A tremella-like Mo and N codoped graphitic nanosheet array supported on activated carbon (Mo2C-MoC/AC-N) is prepared via in situ carbonization of nitrogen-rich cobalt phthalocyanine nanoparticulates anchored on activated carbon as a high-performance anode for potassium-ion batteries. The nanosheets about 5 nm thick are uniformly distributed on the surface of activated carbon for fast K-ion intercalation, and the abundant micropores in activated carbon provide additional adsorption sites of potassium ions, forming a three-dimensional architecture for potassium storage. The 3.9 atom % Mo in Mo2C-MoC/AC-N is in the form of Mo2C and MoC flakes (around 1:1) attached to the graphitic nanosheets. X-ray diffraction (XRD) analysis revealed that the reaction with Mo2C (forming K2C) happens mainly at 0.8–0.4 V, while the reaction with MoC (forming K2C) occurs primarily at 0.4–0.01 V. The N doping (9.6 atom %) causes an interlayer spacing expansion of 0.3 Å in the graphitic nanosheets, beneficial to the potassium-ion insertion reaction to form KC8 at 0.4–0.01 V. The Mo2C-MoC/AC-N anode exhibits a capacity of 457.5 mA h g–1 at a current density of 0.05 A g–1 and an excellent capacity of 144.4 mA h g–1 at a high current of 5 A g–1 with a capacity loss rate of 0.49‰ per cycle.


  • Interface‐Engineered Dendrite‐Free Anode and Ultraconductive Cathode for Durable and High‐Rate Fiber Zn Dual‐Ion Microbattery

    by Shengli Zhai, Na Wang, Xuehai Tan, Keren Jiang, Zhongyi Quan, Yunwei Li, Zhi Li

    Despite the advantages of the fiber‐shaped Zn‐ion microbattery (FZMB) in powering wearable electronics, several fundamental challenges hinder its practical application, mainly including dendrite growth on Zn anodes (leading to short cycle life) and low electrical conductivity of cathode (resulting in poor rate performance). Herein, a facile approach of sputtering a nano‐thin conductive carbon layer on Zn anode to effectively suppress dendrite growth and a dual‐conductive polymer strategy to fabricate ultraconductive core‐sheath fiber cathode (poly(3,4‐ethylenedioxythiophene)‐poly(styrene sulfonate) (PEDOT:PSS) fiber@polyaniline nanobulges) are demonstrated. The carbon layer suppresses Zn dendrites by uniformizing surface electric field and providing abundant nucleation sites. The superior conductivity of the cathode is inherited from two conductive polymers (in particular, PEDOT:PSS fibers have an ultrahigh conductivity of 3676 S cm−1) and their strong intermolecular interactions. The resulting FZMB shows excellent stability (over 100% capacity retention after 3000 cycles) and supercapacitor‐level rate performance (73% capacity retention from 0.1 to 10 A g−1). Kinetics and mechanism studies reveal that the surface‐controlled dual‐ion migration mechanism is also correlated with the high rate performance. The corresponding quasi‐solid‐state device exhibits high stability under extreme deformation conditions and superior water‐proof capability (94.6% capacity retention after 12 h underwater immersion), demonstrating great practical application potential.


  • Biomass-derived nanocarbon materials for biological applications: challenges and prospects

    by H. Enis Karahan, Mengdi Ji, José Luis Pinilla, Xiaoxing Han, Abdelrhman Mohamed, Liang Wang, Yilei Wang, Shengli Zhai, Alejandro Montoya, Haluk Beyenal, et al.

    This review discusses the current status and future potential of biomass-derived nanocarbons for a wide range of biomedical/environmental applications, including bioimaging, microbial inactivation, wound care, and microbial electrochemical systems.


  • Ultrathin nickel boride nanosheets anchored on functionalized carbon nanotubes as bifunctional electrocatalysts for overall water splitting

    by Xuncai Chen, Zixun Yu, Li Wei, Zheng Zhou, Shengli Zhai, Junsheng Chen, Yanqing Wang, Qianwei Huang, H. Enis Karahan, Xiaozhou Liao, et al.

    Transition metal boride (TMB) materials have recently gained vast interest as a new class of catalysts. However, their catalytic performance is still limited due to poor electrical conductivity and limited specific surface area. Here, we demonstrate a generalizable approach to overcome these limitations by anchoring ultrathin nickel boride (NixB) sheets on the surfaces of functionalized small-diameter multi-walled carbon nanotubes (f-MWCNTs). The electrochemically active surface area and charge transfer resistance of the resulting hybrid materials (NixB/f-MWCNT) is 3.4 and 0.24 times that of the NixB nanosheets, respectively. And, NixB/f-MWCNT exhibited superior catalytic activities and stability toward both oxygen evolution and hydrogen evolution reactions. For the overall water splitting, it requires a cell voltage of 1.60 V to reach the current density of 10 mA cm−2, outperforming existing metal boride catalysts as well as commercial IrO2/Pt/C catalysts. Further, X-ray photoelectron spectroscopy revealed the strong chemical coupling between NixB and f-MWCNTs and the in situ formation of highly active NiOOH/NixB and Ni(OH)2/NixB heterojunctions, which contributes to the superior activity. The developed design concept can serve as a general approach to improve other electrocatalysts with low electrical conductivity and specific surface area, such as metal oxides, metal hydroxides, and metal–organic framework-derived materials.