Yuye Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yuye Zhang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Wei Fan
Research Institute of Hunan University in Chongqing
3 shared publications Xiaobao Zuo
2 shared publications- Baijian Tang
School of Civil Engineering, Suzhou University of Science and Technology, Suzhou 215011, China
1 shared publication - Bin Liu
Ph.D. Candidate, Dept. of Bridge Engineering, College of Civil Engineering, Hunan Univ., Changsha 410082, China
1 shared publication - Chaoyu Zhu
Department of Bridge Engineering, Tongji University, Shanghai 200092, China
1 shared publication Chunqiang Liu
1 shared publication
Latest Publications
- 28 July 2025
- Published by Elsevier in Engineering Structures
- Vol. 343
Experimental and numerical investigation of post-earthquake recoverability of a novel precast segmental double-column pier
- 28 July 2025
- Published by Elsevier in Engineering Structures
- Vol. 343
Experimental and numerical investigation of post-earthquake recoverability of a novel precast segmental double-column pier
- 3 August 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 443
Multi-scale numerical simulation on mechanical strength of concrete based on its microstructural evolution
- 3 August 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 443
Multi-scale numerical simulation on mechanical strength of concrete based on its microstructural evolution
- 28 February 2024
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 300
Mesoscale modeling and simulation on the chemo-mechanical behavior of concrete in sulfate-rich environments
- 28 February 2024
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 300
Mesoscale modeling and simulation on the chemo-mechanical behavior of concrete in sulfate-rich environments
- 22 January 2024
- Published by Elsevier in Engineering Failure Analysis
- Vol. 158
Damage mechanism and assessment of precast double-column bridge piers under blast impact
- 22 January 2024
- Published by Elsevier in Engineering Failure Analysis
- Vol. 158
Damage mechanism and assessment of precast double-column bridge piers under blast impact
- 8 March 2021
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 18 (8) , 1107-1119
An energy-based method for assessing the equivalent static force of a vehicle collision with bridge columns
A new method is proposed to obtain the equivalent static forces of a vehicle collision with bridge columns. The method is based on energy-conservation and, conversely to other existing methods, does not require the use of complex models or experimental data to obtain time histories of impact. A simplified numerical model is also developed to generate data and compare the performance of the energy-conservation method against three other approaches (global average, local average, and equivalent displacement methods) and the AASHTO allowances. The simplified model is efficient and correctly captures the response for different impact velocities and column sizes. The impact velocity was shown to be positively related to the impact force and column displacement, and the size of the column is also positively related to the impact force but negatively with the column displacement. Results of equivalent static forces show that the global average and local average methods may not provide acceptable values for the equivalent impact force from the collision of vehicles with bridge columns, whereas the equivalent displacement and the proposed energy-based method provide adequate values. The latter approach, however, has the advantage of simplicity and convenience since it does not rely on any numerical/experimental model.
- 8 March 2021
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 18 (8) , 1107-1119
An energy-based method for assessing the equivalent static force of a vehicle collision with bridge columns
A new method is proposed to obtain the equivalent static forces of a vehicle collision with bridge columns. The method is based on energy-conservation and, conversely to other existing methods, does not require the use of complex models or experimental data to obtain time histories of impact. A simplified numerical model is also developed to generate data and compare the performance of the energy-conservation method against three other approaches (global average, local average, and equivalent displacement methods) and the AASHTO allowances. The simplified model is efficient and correctly captures the response for different impact velocities and column sizes. The impact velocity was shown to be positively related to the impact force and column displacement, and the size of the column is also positively related to the impact force but negatively with the column displacement. Results of equivalent static forces show that the global average and local average methods may not provide acceptable values for the equivalent impact force from the collision of vehicles with bridge columns, whereas the equivalent displacement and the proposed energy-based method provide adequate values. The latter approach, however, has the advantage of simplicity and convenience since it does not rely on any numerical/experimental model.
- 4 September 2019
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 17 (11) , 6141-6163
Cyclic loading tests and analyses of posttensioned concrete bridge columns combining cast-in-place and precast segments
- 4 September 2019
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 17 (11) , 6141-6163
Cyclic loading tests and analyses of posttensioned concrete bridge columns combining cast-in-place and precast segments
- Open Access
- 15 July 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (14) , 2820
Experimental Study of High-Strength Concrete-Steel Plate Composite Shear Walls
Shear walls are effective lateral load resisting elements in high-rise buildings. This paper presents an experimental study of the seismic performance of a composite shear wall system that consists of high-strength concrete walls with the embedded steel plate. Two sets of wall specimens with different aspect ratios (height/width, 1.5 and 2.7) were constructed and tested under quasi-static reversed cyclic loading, including five reinforced concrete shear walls (RCSW) and six reinforced concrete-steel plate shear walls (RCSPSW). The progression of damage, failure modes, and load-displacement responses of test specimens were studied and compared based on experimental observations. The test results indicated that high-strength (HS) RCSPSW system showed superior lateral load strength and acceptable deformation capability. The axial compressive load was found to have an indispensable effect on the ductility of both RCSW and RCSPSW, and an upper limit of axial compression ratio (0.5) is recommended for the application of HS RCSPSW in engineering practices. In addition, the design strength models were suggested for predicting the shear and flexure peak strength values of RCSPSW systems, and their applicability and reliability were verified by comparing with test results.
- 15 July 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (14) , 2820
Open AccessExperimental Study of High-Strength Concrete-Steel Plate Composite Shear Walls
Shear walls are effective lateral load resisting elements in high-rise buildings. This paper presents an experimental study of the seismic performance of a composite shear wall system that consists of high-strength concrete walls with the embedded steel plate. Two sets of wall specimens with different aspect ratios (height/width, 1.5 and 2.7) were constructed and tested under quasi-static reversed cyclic loading, including five reinforced concrete shear walls (RCSW) and six reinforced concrete-steel plate shear walls (RCSPSW). The progression of damage, failure modes, and load-displacement responses of test specimens were studied and compared based on experimental observations. The test results indicated that high-strength (HS) RCSPSW system showed superior lateral load strength and acceptable deformation capability. The axial compressive load was found to have an indispensable effect on the ductility of both RCSW and RCSPSW, and an upper limit of axial compression ratio (0.5) is recommended for the application of HS RCSPSW in engineering practices. In addition, the design strength models were suggested for predicting the shear and flexure peak strength values of RCSPSW systems, and their applicability and reliability were verified by comparing with test results.
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 16 (9)
Interfacial bond-slip relationship between Carbon Fiber Reinforced Polymer Plate and Concrete after High Temperature of Asphalt Paving Construction
The bond-slip relationship of Carbon Fiber Reinforced Polymer (CFRP) plate-concrete after the influence of high temperature action of Stone Mastic Asphalt (SMA) paving was investigated in this article. Two groups of double shear specimens with different bonding length were designed and tested. Based on the test results, the failure modes of specimens, the strain distribution and the shear stress of CFRP-concrete interface were analyzed. Considering the influence of high temperature, the interfacial bond-slip constitutive model of CFRP plate and concrete after high temperature action of SMA paving construction was proposed. The proposed model can reflect the nonlinearity and interface softening behaviour of the CFRP plate-concrete interface constitutive relationship under special environment. Through the comparative study of exixting constitutive models, the interface bond-slip constitutive model proposed in this paper considers the effect of high temperature and has good agreement with the test results.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 16 (9)
Open AccessInterfacial bond-slip relationship between Carbon Fiber Reinforced Polymer Plate and Concrete after High Temperature of Asphalt Paving Construction
The bond-slip relationship of Carbon Fiber Reinforced Polymer (CFRP) plate-concrete after the influence of high temperature action of Stone Mastic Asphalt (SMA) paving was investigated in this article. Two groups of double shear specimens with different bonding length were designed and tested. Based on the test results, the failure modes of specimens, the strain distribution and the shear stress of CFRP-concrete interface were analyzed. Considering the influence of high temperature, the interfacial bond-slip constitutive model of CFRP plate and concrete after high temperature action of SMA paving construction was proposed. The proposed model can reflect the nonlinearity and interface softening behaviour of the CFRP plate-concrete interface constitutive relationship under special environment. Through the comparative study of exixting constitutive models, the interface bond-slip constitutive model proposed in this paper considers the effect of high temperature and has good agreement with the test results.
- Open Access
- 1 January 2019
- Published by Czech Technical University in Prague - Central Library in Stavební obzor - Civil Engineering Journal
- Vol. 28 (1) , 32-44
INFLUENCE OF STRAINING BEAMS ON THE SEISMIC FRAGILITY OF DOUBLE-COLUMN BRIDGE PIERS
The piers of girder bridges have a very important role on the safety of the structural system to earthquakes. This paper addresses the seismic fragility of double-column (DC) bridge piers by focusing on the influence of the straining beams and the direction of seismic waves. The seismic capacity of eight DC piers with different number and position of straining beams is first studied by pushover analyses. These results are used to derive empirical formulas for the seismic capacity of general DC piers and to define damage indices for prescriptive damage states. Finite element models of typical girder bridges with the different piers are carried out next to assess the seismic demand of these piers and to generate fragility curves by comparing their seismic demand and damage indices at the defined damage states. Results indicate that: (1) DC piers are more vulnerable when subjected to longitudinal ground motions compared with the case of transverse inputs; (2) the damage probability of the piers for transverse seismic inputs decreases with the increasing relative height of the straining beams; and (3) DC piers with two straining beams have enhanced performance in the transverse direction compared with those with a single straining beam.
- 1 January 2019
- Published by Czech Technical University in Prague - Central Library in Stavební obzor - Civil Engineering Journal
- Vol. 28 (1) , 32-44
Open AccessINFLUENCE OF STRAINING BEAMS ON THE SEISMIC FRAGILITY OF DOUBLE-COLUMN BRIDGE PIERS
The piers of girder bridges have a very important role on the safety of the structural system to earthquakes. This paper addresses the seismic fragility of double-column (DC) bridge piers by focusing on the influence of the straining beams and the direction of seismic waves. The seismic capacity of eight DC piers with different number and position of straining beams is first studied by pushover analyses. These results are used to derive empirical formulas for the seismic capacity of general DC piers and to define damage indices for prescriptive damage states. Finite element models of typical girder bridges with the different piers are carried out next to assess the seismic demand of these piers and to generate fragility curves by comparing their seismic demand and damage indices at the defined damage states. Results indicate that: (1) DC piers are more vulnerable when subjected to longitudinal ground motions compared with the case of transverse inputs; (2) the damage probability of the piers for transverse seismic inputs decreases with the increasing relative height of the straining beams; and (3) DC piers with two straining beams have enhanced performance in the transverse direction compared with those with a single straining beam.
- Open Access
- 3 December 2018
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 15 (11)
Damage index analysis of prefabricated segmental bridge columns under cyclic loading
The damage index is usually applied to evaluate the damage states of bridge structures, which is the basis of structural fragility study. The present study investigates the seismic damage index of the prefabricated segmental bridge columns (PSBC) under cyclic loading by theoretical and numerical analysis. Based on the previous pseudo-static experiments, different damage states characteristics of the monolithic cast-in-place bridge columns (MCBC) and the PSBC are discussed and analyzed to propose the limit-state capacities for each damage state of the PSBC. The limit-state capacities include four parameters: compressive strain of concrete, the tensile strain of steel, the prestress level and the residual displacement. Two finite element models of the PSBC are developed by OpenSees to carry on numerical analysis. Using the numerical results, the damage indexes for the PSBCs are obtained based on the limit-state capacities obtained above. The results indicate that the numerical results show good agreement with the experimental results of the bridge columns. The damage index formula of the PSBC, derived in this study, is reasonable and can be further applied. The maximum error between the proposed damage index and that obtained in the verified case is 20.3%. The proposed method in this paper for developing the damage index of the PSBC can be used in the seismic vulnerability analysis assessment of the bridge structures with prefabricated segmental columns.
- 3 December 2018
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 15 (11)
Open AccessDamage index analysis of prefabricated segmental bridge columns under cyclic loading
The damage index is usually applied to evaluate the damage states of bridge structures, which is the basis of structural fragility study. The present study investigates the seismic damage index of the prefabricated segmental bridge columns (PSBC) under cyclic loading by theoretical and numerical analysis. Based on the previous pseudo-static experiments, different damage states characteristics of the monolithic cast-in-place bridge columns (MCBC) and the PSBC are discussed and analyzed to propose the limit-state capacities for each damage state of the PSBC. The limit-state capacities include four parameters: compressive strain of concrete, the tensile strain of steel, the prestress level and the residual displacement. Two finite element models of the PSBC are developed by OpenSees to carry on numerical analysis. Using the numerical results, the damage indexes for the PSBCs are obtained based on the limit-state capacities obtained above. The results indicate that the numerical results show good agreement with the experimental results of the bridge columns. The damage index formula of the PSBC, derived in this study, is reasonable and can be further applied. The maximum error between the proposed damage index and that obtained in the verified case is 20.3%. The proposed method in this paper for developing the damage index of the PSBC can be used in the seismic vulnerability analysis assessment of the bridge structures with prefabricated segmental columns.