YSYang Shen

Yang Shen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yang Shen has a total of 414 co-authors. Here are the top co-authors by number of shared publications:

  • Ce-Wen Nan

    State Key Laboratory of New Ceramic Materials School of Materials Science and Engineering Tsinghua University Beijing China

    37 shared publications
  • Yuanhua Lin

    State Key Laboratory of New Ceramics and Fine Progressing

    24 shared publications
  • Jianyong Jiang

    Research Center for New Functional Composites Wuzhen Laboratory Tongxiang P. R. China

    22 shared publications
  • Zhonghui Shen

    State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Center of Smart Materials and Devices, Wuhan University of Technology, Wuhan, China

    22 shared publications
  • Le Zhou

    State Key Lab of New Ceramic Materials, School of Materials Science and Engineering Tsinghua University Beijing China

    20 shared publications
  • Weibin Ren

    State Key Lab of New Ceramic Materials, School of Materials Science and Engineering, Tsinghua University, Beijing, China

    16 shared publications

Latest Publications

  • Suppressing Sodium Dendrites Through Protein‐Mediated Tip Adsorption Effect

    by Yue Li, Haocheng Yuan, Hongji Pan, Li Cai, Peipei Ding, Dengfeng Yu, Huifeng Zhuang, Ying Liang, Hanlin Luo, Chuangjie Guo, et al.

    Dendrite growth and interfacial side reactions severely limit the cycle life of sodium batteries. While electrolyte additives represent the simplest mitigation strategy, conventional additives rely on single chemical driving mechanisms, and pose environmental concerns. Here, we propose a bio‐adaptive approach based on the protein tip adsorption effect, demonstrating at the “amino acid–peptide–protein” scale that this mechanism regulates electric field distribution around sodium bud tips to induce uniform sodium deposition and stripping. Concurrently, it promotes formation of a robust solid electrolyte interphase, rearranging the sodium metal anode into a smoother surface. Electrolytes engineered via this tip adsorption effect deliver enhanced cycling and stripping performance in sodium symmetric cells across 1, 5, and 10 mA cm −2 , with a maximum tolerable current density exceeding 25 mA cm − 2 . Remarkably, NVP||Na cells achieve 20,000 cycles at 10 C and 16,000 cycles at an ultrahigh 50 C rate. The electrolyte also shows broad anode compatibility: NVP||Al@C cells with a high NVP loading of 10.32 mg cm − 2 sustain 1,000 cycles at 5 C. Guided by sustainable development principles, this work may inspire exploration of natural, eco‐friendly materials for battery modification.

  • Open Access

    Optimizing Traps and Dihedral Angles to Modulate Charge Transport Behavior for High-Temperature Dielectric Energy Storage

    by Yang Zhao, Shuo Zhao, Shiyi Wu, Mufeng Zhang, Minzheng Yang, Lei Yang, Weibin Ren, Ce-Wen Nan, Yang Shen

    High-temperature dielectric films hold broad prospects in next-generation microelectronics and power systems. However, commercially available dielectric materials for electrostatic energy storage, specifically biaxially oriented polypropylene, suffer from drawbacks such as low energy density, low efficiency, and poor reliability, which limit the application of film capacitors in harsh environments. Herein, a series of naphthalene tetracarboxylic acid dianhydrides were incorporated into polyetherimide (PEI) backbone, thereby modulating the charge transport behavior. Specifically, synergistic regulation of traps and dihedral angles has effectively enhanced the breakdown strength of PEI. At 200 °C, the optimized dielectric film delivers a discharged energy density of 6.00 J cm−3 at an efficiency of 90%, and maintains stable performance over 105 charge-discharge cycles at 300 MV m−1. Multilayer stacked film capacitors prepared from the optimized films exhibit remarkable thermal stability and capacitive performance. This work proposes a feasible strategy for developing dielectric films with remarkable energy storage performance, superior thermal stability, and scalable fabrication capability.

  • Chirality‐Induced Twisted Supramolecular Assembly Unlocks Ultrahigh Energy Density at Elevated Temperatures

    by Shuo Zhao, Le Zhou, Bingyu Zou, Yang Zhao, Huanyu Lei, Mufeng Zhang, Shiyi Wu, Erxiang Xu, Xin Li, Junshang Zhang, et al.

    To meet the demands of high‐power‐density electronics, high‐temperature‐resistant polymer dielectrics are essential for ensuring reliable operation. Although doping with molecular semiconductors effectively improves the high‐temperature performance of polymer dielectrics, the semiconductors often exist in an isolated, discontinuous distribution. Beyond the inherent issues of poor dispersion and interfacial incompatibility, this morphology may also form conductive pathways under excessive doping, resulting in severe degradation of dielectric properties. Herein, we incorporated chiral molecules e.g., (13bR)‐5,6‐dihydro‐5‐(trans‐4‐propylcyclohexyl)‐4H‐dinaphtho[2,1‐f:1’,2’‐h][1,5]dioxonin (R5011) and its chiral enantiomer (S5011) into polyethersulfone (PES) to construct supramolecular chiral co‐assembly structure. Through π – π stacking interactions, the chiral molecules give rise to an amplified and emergent chiral expression at the macroscopic polymer chain level. The local twisted structure formed by chiral amplification leads to an enlarged torsional angle between the sulfone‐flanking phenyl rings and constructs carrier traps, thereby significantly enhancing the breakdown strength. Ultimately, the co‐assembly PES achieved high energy densities of 8.73 J cm −3 (150°C) with efficiency of 90% and maximum discharge energy density of 10.08 J cm −3 at 150°C. Furthermore, stacked film capacitors based on the PES composite films demonstrated excellent high‐temperature capacitance stability at 150°C. This work demonstrates a novel approach to designing advanced polymer dielectrics through supramolecular interactions.

  • Open Access

    Ultrahigh piezoelectric performances in soft lead zirconate titanate/polydimethylsiloxane composites by ethanol-assisted freeze casting

    by Yao Xiao, Lei Yang, Mufeng Zhang, Xin Li, Erxiang Xu, Minzheng Yang, Penghao Hu, Yang Shen

    Flexible materials capable of transducing mechanical signals into electrical responses underpin advances in wearable systems, soft robotics, and underwater sensing technologies. Ceramic–polymer piezoelectric composites can combine high electromechanical activity with mechanical compliance, but controlling phase distribution and architecture remains challenging. Here, we report an ethanol-assisted freeze-casting strategy that endows soft lead zirconate titanate/polydimethylsiloxane composites with an anisotropic architecture, enabling both high piezoelectric performance and excellent mechanical deformability. The composites achieve a high piezoelectric charge coefficient of 275 pC·N−1, a piezoelectric voltage coefficient of 233 mV·m·N−1, and an energy-harvesting figure of merit of 64.1 pm2·N−1. The composites also exhibit robust mechanical flexibility, sustaining bending with radii below 5 mm, twisting, compressive deformation, and tensile strains up to 60%. The ethanol-assisted route suppresses freeze-induced cracking and improves three-dimensional compositional uniformity. This method offers a scalable and practical route for fabricating high-performance flexible piezoelectric composites for next-generation sensing technologies.


  • Open Access

    Deep learning-driven intelligent mesoscopic model (DeepMeso): a case study on ferroelectrics

    by Run-Lin Liu, Zhong-Hui Shen, Han-Xing Liu, Yang Shen, Ce-Wen Nan

    Integrating artificial intelligence with computational methods has emerged as a transformative force in materials research, exemplified by breakthroughs such as DeepH and DeepMD. However, a critical gap persists in multiscale intelligent design: the lack of mesoscopic models capable of bridging microstructural features with macroscopic properties. Here, we develop DeepMeso, a generative deep learning-enabled mesoscopic model, for the intelligent design of complex heterogeneous materials. To exemplify the framework, we instantiate it in ferroelectrics (DeepFerro), where our workflow first integrates a data-driven surrogate model to predict key ferroelectric properties with an accuracy exceeding 99.6%. Then, we implement a 3D generative network to achieve inverse design across both composition and microstructure spaces, directly targeting predefined polarization objectives. When tasked with multi-objective on-demand generation, DeepFerro yields a mean squared error of 0.0497 and an R2 value of 95.44% against simulation benchmarks. Critically, it also exhibits robust transferability and extrapolation capability across 63 distinct ferroelectric systems, demonstrating its generalizability in end-to-end optimization. In parallel, model interpretability translates the learned relations into explicit, hierarchical guidelines. This generalizable intelligent design framework DeepMeso could be further extended to diverse heterogeneous materials, which will deepen the understanding of composition–microstructure–property relationships and facilitate the on-demand inverse design at the mesoscopic scale.


  • Top Cited Papers

    An entropy-regulating molecular lock stabilizes formamidinium lead halide perovskite

    by Tianyin Miao, Sanwan Liu, Xia Lei, Yong Zhang, Wenpei Li, Qisen Zhou, Jianan Wang, Nikita A. Emelianov, Victoria V. Ozerova, Valeria S. Bolshakova, et al.

    A critical limitation of formamidinium lead iodide (FAPbI 3 ) perovskite solar cells (PSCs) lies in the intrinsic instability of the ionic–covalent Pb–I octahedral lattice, relative to the unfavorable hexagonal δ-phase under operating conditions. We report an entropy-regulating molecular-lock strategy using 1-pyridin-3-ylmethyl-piperazine hydrochloride (3-PMPCl). Strong interactions between the perovskite lattice surface and 3-PMPCl modulate the rotational freedom of organic cations and suppress the detrimental entropy increase associated with [PbI 6 ] 4− octahedra disorder or expansion. This entropy-favored environment intrinsically increases the phase transition energy barrier. The uniform distribution and strong adsorption of 3-PMPCl stabilize the α-phase under elevated temperature and humidity conditions. We achieved a certified power conversion efficiency (PCE) of 27.6% in FAPbI 3 -based PSCs. However, the operational stability of such champion devices remains below the state of the art. Adopting a stable bismuth electrode addresses this issue with a slight reduction in efficiency, yielding a device that retains 93.0% of its initial PCE (26.8%) after 1011 hours at 85°C under 1-sun illumination.


  • In Situ Grown Inorganic Covalent Surface Barriers Enable High‐Temperature Capacitive Energy Storage

    by Xin Li, Pengfei Li, Weibin Ren, Yunyu Liu, Yao Xiao, Erxiang Xu, Shiyi Wu, Shuo Zhao, Jiayu Pan, Jianyong Jiang, et al.

    Polymer dielectrics are crucial for high‐energy‐density electrostatic capacitors yet suffer from severe high‐temperature performance degradation due to escalated conduction loss and diminished breakdown strength. While conventional construction of nanoscale inorganic surface layers on dielectric polymer films can partially suppress conduction losses at elevated temperatures, poor interfacial adhesion coupled with complex, expensive fabrication technology hinders industrial scalability. Herein, we develop a solution‐processed nanoscale inorganic covalent surface barrier (SNICS) strategy. Specifically, scalable ultrathin SiO x barrier layers featuring covalently bonded Si─C transition interphases are conformally fabricated on both surfaces of polyetherimide (PEI) films via facile ultrasonic spray‐coating (USC) of perhydropolysilazane (PHPS) precursor solution followed by room‐temperature ultraviolet (UV) irradiation. The SNICS architecture ensures robust interfacial cohesion while effectively suppressing conduction loss through: 1) substantial elevation of the Schottky emission barrier height; 2) introduction of deep charge traps by the high‐electron‐affinity Si─C interphase; and 3) enhanced thermal/mechanical stability from the covalent bonding, outperforming traditional magnetron‐sputtered counterparts. Consequently, SNICS‐engineered films with optimized 186 nm SNICS achieve an exceptional discharged energy density ( U d ) of 5.05 J cm −3 with 90 % efficiency at 200 °C, which is significantly higher than the reported values obtained in the composites fabricated with multilayered structures, with along siding excellent self‐healing capability and outstanding cyclability. This surface engineering presents a scalable pathway for high‐temperature high‐performance polymer capacitors.


  • Solvated-intermediate-driven surface transformation of lead halide perovskites

    by Sanwan Liu, Tianyin Miao, Jianan Wang, Yong Zhang, Rui Chen, Xia Lei, Wenming Qin, Zhongjie Zhu, Lanlu Lu, Zhenhua Chen, et al.


  • Open Access

    Liquid-matter relaxor ferroelectrics by design

    by Xinxin Zhang, Yu Zou, Minghui Deng, Xiang Huang, Fan Ye, Xiujuan Liu, Erxiang Xu, Yang Shen, Satoshi Aya, Mingjun Huang

    Knowing that traditional relaxor ferroelectrics stem from crystalline materials, one may ask whether they stabilize the liquid-matter analogy. The perspective is challenging and may enable a generic design of fluidic and flexible relaxor ferroelectrics. Here, we unveil a novel polar matter state, dubbed the nematic relaxor ferroelectric, by artificially introducing polar nanoregions with nematicity into a dielectric nematic environment. We observe clear signatures of a nematic relaxor, which exhibits a high field-induced polarization of 1.1 μC·cm−2 at 5 V·μm−1, over a wide temperature range (>30 K). The relaxor demonstrates two regimes: (1) stable relaxor against high electric fields (> 5 V·μm−1) at high temperatures over a 30 K range; (2) relaxor with a field-induced transition to a ferroelectric state at low temperatures. Based on the Landau-Ginzburg-Devonshire theory, we reconstruct free-energy landscapes from the electric field vs polarization curves. We observe a continuous transformation of energy landscapes from a double-well shape to a single-well shape, characterized by a broadening of the energy bottom, corresponding to a shift from nematic ferroelectrics to nematic relaxors with significant polarization fluctuations.


  • Top Cited Papers

    Aromatic interaction-driven out-of-plane orientation for inverted perovskite solar cells with improved efficiency

    by Qisen Zhou, Guoyu Huang, Jianan Wang, Tianyin Miao, Rui Chen, Xia Lei, Erxiang Xu, Sanwan Liu, He Zhu, Zhengtian Tan, et al.