Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carmen Gutiérrez-Bouzán has a total of 45 co-authors. Here are the top co-authors by number of shared publications:

  • Víctor López-Grimau

    Department of Project and Construction Engineering (EPC),Universitat Politecnica de Catalunya,Spain

    15 shared publications
  • Valentina Buscio

    Institute of Textile Research and Industrial Cooperation of Terrassa (INTEXTER), Universitat Politècnica de Catalunya-BarcelonaTECH (UPC), 08034 Barcelona, Spain

    8 shared publications
  • M. Crespi

    Institut d’Investigació Tèxtil i Cooperació Industrial de Terrassa (INTEXTER), Universitat Politècnica de Catalunya-BarcelonaTech (UPC), C/Colom 15, 08222, Terrassa, Spain, Tel. +34 93 739 80 08; Fax: +34 93 739 82 72

    4 shared publications
  • Martí Crespi

    Institut d'Investigació Tèxtil i Cooperació Industrial de Terrassa (INTEXTER), Universitat Politècnica de Catalunya - Barcelona Tech. C/Colom 15, Terrassa, Spain

    4 shared publications
  • Martí Crespi

    Univ Politecn Cataluna, Barcelona Tech, Inst Invest Text & Cooperacio Ind Terrassa INTEXT, Colom 15, Terrassa 08222, Spain

    4 shared publications
  • Montserrat López-Mesas

    GTS-UAB Research Group, Department of Chemistry, Faculty of Science, Universitat Autònoma de Barcelona, Bellaterra, (Cerdanyola del Vallès), 08193 Barcelona, Spain

    4 shared publications

Latest Publications

  • Open Access

    Sustainable Filtering Systems to Reduce Microfiber Emissions from Textiles during Household Laundering

    by Francisco Belzagui, Carmen Gutiérrez-Bouzán, Fernando Carrillo-Navarrete, Víctor López-Grimau

    During laundering, synthetic textiles (polyester, polyamide, etc.) can release small fiber debris with a length of <5 mm. These are a type of microplastics (MPs), usually referred to as microfibers (MFs), which are considered high-concern pollutants due to their continuous and cumulative entrance into the environment. Currently, as far as we know, there are no feasible alternatives to remove them. In this work, four new and sustainable filtering systems are proposed to retain the MFs emitted from domestic washing machines. The filters contain a replaceable cartridge partially filled with recycled low-density polyethylene pellets. The four designed filtering systems of different sizes were tested in a household washing machine determining the retention efficiency of the MFs after several washing cycles. It was found that all four assessed filter arrangements have a good performance for retaining MFs from the washers’ effluents. Filter F1 (diameter of 4 cm and a height of 30 cm) started retaining more than 50% of the MFs, at the 10th washing cycle, the retention climbed to 66%, while in the 20th washing cycle, its retention was greater than 80%. MFs retention was higher for filter F2 (diameter of 6.3 cm and a height of 41 cm), achieving a performance greater than 90% in the 20th washing cycle. Filter F3 was arranged by turning the F1 model flow upside down and the retention efficiency is higher compared with filter F1 values, reaching a retention efficiency of almost 100% in the 15th washing cycle. Finally, filter F4 arrangement was developed using the existing washing machine filter, obtaining better performance than the F1 and F2 filters, reaching efficiencies higher than 90% at the 20th washing cycle. In summary, depending on the arrangement, the microfiber retention efficiency was estimated between 52% and 86% in the 1st washing cycle and up to 83% to 99% in the 20th. Additionally, all arrangements demonstrated that the cartridges may last for more than 30 washing cycles before needing to be replaced.


  • Open Access

    Modelling for the Efficient Effluent Dye Removal to Reuse Water and Salt

    by Valentina Buscio, Víctor López-Grimau, Bettina Vallés, Montserrat Pepió, Carmen Gutiérrez-Bouzán

    The objective of this work was to determine the optimal conditions for the electrooxidation treatment in order to decolourise the effluents that contain reactive dyes. According to the results, when Na2SO4 is used as an electrolyte, the decolouration reactions follow first-order kinetics. However, when NaCl is present in the effluent, the first-order kinetics is stabilised after applying a minimal electric current value. The models obtained from the results show that the higher the concentration of NaCl, the lower the energy consumption. On the other hand, an increase in dye concentration leads to an increase in electrical consumption. In relation to the pH, the results show that it is not a key factor in the decolouration efficiency. Finally, the obtained model was applied to two real effluents. The feasibility of individually treating the effluents from the dyeing process and those from the subsequent wash-off process was evaluated. From an industrial application point of view, it is recommended to mix both effluents before treatment, especially when the dye concentration is high.


  • Open Access

    Novel Treatment to Immobilize and Use Textiles Microfibers Retained in Polymeric Filters through Their Incorporation in Composite Materials

    by Francisco Belzagui, Carmen Gutiérrez-Bouzán, Fernando Carrillo-Navarrete

    Microplastics (MPs, size < 5 mm) are among the most environmentally challenging pollutants. Their continuous and cumulative inflow or generation in the environment is what makes them drastically problematic. These pollutants can come from a wide variety of sources; hence, they are potential vectors that pose extensive risks to environmental and human health. Microfibers (MFs) are one type of MPs. Among the most well-known types of MFs are those detached from textile articles from household laundering or industrial processes. Currently, there are many ways to retain the MFs detached from textile articles. However, as far we know, there are no methods of valorizing the retained MFs. As such, we propose a novel and sustainable treatment method to immobilize MFs in a polymeric matrix, turning them into a composite. To determine the mechanical properties of the expected composites, different proportions of polyester MFs were mixed with low-density polyethylene, which is the material proposed for the immobilization of MFs. The results show that the optimum manufacturing composition was 10% (v/v) polyester MFs in the polymeric matrix. This composition improved some of the tensile mechanical properties of the polymeric matrix. Once the composites are obtained, these can be used for different purposes.


  • Top Cited Papers

    Microplastics' emissions: Microfibers’ detachment from textile garments

    by Francisco Belzagui, Martí Crespi, Antonio Álvarez, Carmen Gutiérrez-Bouzán, Mercedes Vilaseca


  • Open Access

    Respirometric Study of Optical Brighteners in Textile Wastewater

    by Héctor Salas, Carmen Gutiérrez-Bouzán, Víctor López-Grimau, Mercedes Vilaseca

    Optical brighteners (OBs) are colorless fluorescent dyes, widely used in industry to improve whiteness in materials. Nearly 80% of all OBs in the market are derivatives of stilbene. They absorb the near-ultraviolet light and re-emit most of it in the blue range as visible fluorescence. OBs are commonly applied on textiles, detergents, paper and plastic products, among others. OBs have a low degradation ratio. In biological plants, they can only be partially removed by adsorption into the sludge and a tertiary treatment could be required to fully remove them. Part of them may persist and can be found in river and lake waters. The current work aims to evaluate the effect of the OBs in the bacterial activity of biological wastewater treatment plants. The influence of two commercial OBs (Goldblanc BHA and Leucophor PC) on respiration rate was monitored by means of a semi-continuous electrolytic respirometer, in order to obtain information related to the growth of the biomass and the degradation of the substrate. Their acute toxicity was also determined. It was concluded that the OB effect on bacteria population is variable depending on its chemical structure. Unlike the former, the Leucophor-PC brightener had an impact on the respirometric rate.


  • Open Access

    Kinetic models for the electrochemical decolouration of two reactive azo dyes

    by Víctor López-Grimau, Montserrat Pepió, Carmen Gutiérrez-Bouzán, Valentina Buscio


  • Open Access

    Combining electrochemistry and UV for the simultaneous wastewater decolorization and reduction of salinity

    by Carmen Gutiérrez-Bouzán, Valentina Buscio

    Textile dyeing processes with reactive dyes consume high amount of water and generate wastewater containing residual dyes and salts. In this work, wastewater generated by a textile industry was treated by means of electrochemical techniques combined with ultraviolet irradiation. Five industrial wastewaters were collected in a textile mill and were treated at 10 A in an electrochemical cell. Full color removal was obtained after 10 minutes of treatment. The optimization of the electrochemical treatment was performed in order to select the most suitable conditions. Subsequently the decolorized effluents, which still contain salts, were irradiated with UV light to remove residual oxidants and were reconstituted for its reuse. This procedure enabled to reuse 70% water and 64% salt in the dyeing process. The chromatic coordinates of these dyed samples were evaluated with respect to reference ones. In all cases, samples dyed with the reused effluents showed colour differences into acceptance limit of the textile industry (DECMC(2:1) values lower than 1).


  • Open Access

    Reducing environmental impact of textile wastewater by natural coagulants and reuse of effluents

    by Héctor Salas, Víctor Lopez-Grimau, Mercedes Vilaseca, Martí Crespi, Carmen Gutiérrez-Bouzán