Judy Amanor-Boadu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Judy Amanor-Boadu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Edgar Sanchez-Sinencio
Department of Electrical and Computer Engineering, Texas A&M University, College Station, TX 77843 USA
4 shared publications- Edgar Sanchez-Sinencio
Department of Electrical and Computer Engineering, Texas AM University, College Station, TX, USA
3 shared publications - Anthony Guiseppi-Elie
Texas A&M University
2 shared publications Mohamed A. Abouzied
Was with Department of Electrical Engineering, Texas A&M University, College Station, TX, USA
2 shared publicationsRoland Ribeiro
2 shared publicationsSalvador Carreon-Bautista
2 shared publications
Latest Publications
- 12 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Leveraging SIMPLIS to Better Predict Server Platform Power Delivery Performance
Voltage regulator (VR) and power delivery network (PDN) models are critical to the design of server platforms. Inaccurate models can result in over-design, leading to increased costs or an under-design, which can lead to performance deterioration. Tools, such as HSPICE and SIMPLIS, are used to predict the performance of server platform power delivery systems. These tools have different strengths and weaknesses, e.g., HSPICE provides more reliable results in the first voltage droop timing of the waveforms but does not accurately model the behavior of more complex nonlinear VR controllers, and SIMPLIS provides better modeling of the VR response and more reliable results in the third voltage droop timing but can have longer simulation times depending on the complexity of the circuit. A methodology whereby VR models and lab results can be leveraged to improve the overall system level models in both SIMPLIS and HSPICE, through a series of measurement-simulation correlation processes is presented in this paper. Different case studies, including server processor core maximum current (Imax) prediction and Vmin predictability, using this methodology and resulting models, are also presented.
- 12 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Leveraging SIMPLIS to Better Predict Server Platform Power Delivery Performance
Voltage regulator (VR) and power delivery network (PDN) models are critical to the design of server platforms. Inaccurate models can result in over-design, leading to increased costs or an under-design, which can lead to performance deterioration. Tools, such as HSPICE and SIMPLIS, are used to predict the performance of server platform power delivery systems. These tools have different strengths and weaknesses, e.g., HSPICE provides more reliable results in the first voltage droop timing of the waveforms but does not accurately model the behavior of more complex nonlinear VR controllers, and SIMPLIS provides better modeling of the VR response and more reliable results in the third voltage droop timing but can have longer simulation times depending on the complexity of the circuit. A methodology whereby VR models and lab results can be leveraged to improve the overall system level models in both SIMPLIS and HSPICE, through a series of measurement-simulation correlation processes is presented in this paper. Different case studies, including server processor core maximum current (Imax) prediction and Vmin predictability, using this methodology and resulting models, are also presented.
- Open Access
The Impact of Pulse Charging Parameters on the Life Cycle of Lithium-Ion Polymer Batteries
The pulse charging algorithm is seen as a promising battery charging technique to satisfy the needs of electronic device consumers to have fast charging and increased battery charge and energy efficiencies. However, to get the benefits of pulse charging, the pulse charge current parameters have to be chosen carefully to ensure optimal battery performance and also extend the life cycle of the battery. The impact of pulse charge current factors on the life cycle and battery characteristics are seldom investigated. This paper seeks to evaluate the impact of pulse charge current factors, such as frequency and duty cycle, on the life cycle and impedance parameters of lithium-ion polymer batteries (LiPo) while using a design of experiments approach, Taguchi orthogonal arrays. The results are compared with the benchmark constant current-constant voltage (CC-CV) charging algorithm and it is observed that by using a pulse charger at optimal parameters, the cycle life of a LiPo battery can be increased by as much as 100 cycles. It is also determined that the duty cycle of the pulse charge current has the most impact on the cycle life of the battery. The battery impedance characteristics were also examined by using non-destructive techniques, such as electrochemical impedance spectroscopy, and it was determined that the ambient temperature at which the battery was charged had the most effect on the battery impedance parameters.
Open AccessThe Impact of Pulse Charging Parameters on the Life Cycle of Lithium-Ion Polymer Batteries
The pulse charging algorithm is seen as a promising battery charging technique to satisfy the needs of electronic device consumers to have fast charging and increased battery charge and energy efficiencies. However, to get the benefits of pulse charging, the pulse charge current parameters have to be chosen carefully to ensure optimal battery performance and also extend the life cycle of the battery. The impact of pulse charge current factors on the life cycle and battery characteristics are seldom investigated. This paper seeks to evaluate the impact of pulse charge current factors, such as frequency and duty cycle, on the life cycle and impedance parameters of lithium-ion polymer batteries (LiPo) while using a design of experiments approach, Taguchi orthogonal arrays. The results are compared with the benchmark constant current-constant voltage (CC-CV) charging algorithm and it is observed that by using a pulse charger at optimal parameters, the cycle life of a LiPo battery can be increased by as much as 100 cycles. It is also determined that the duty cycle of the pulse charge current has the most impact on the cycle life of the battery. The battery impedance characteristics were also examined by using non-destructive techniques, such as electrochemical impedance spectroscopy, and it was determined that the ambient temperature at which the battery was charged had the most effect on the battery impedance parameters.
- 22 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 26 (10) , 2050-2060
A 13.56-MHz CMOS Active Rectifier With a Voltage Mode Switched-Offset Comparator for Implantable Medical Devices
This paper presents low-power circuit techniques for comparators and controllers to reduce increasing power loss of an active diode with offset/delay calibration in a 13.56-MHz CMOS active rectifier. Unlike a conventional switched-offset comparator, the proposed voltage-mode switched-offset comparator reuses its bias current to generate continuously adjustable offset voltage, thereby reducing power loss. Offset calibration for accurate switching is adopted to improve power conversion efficiency (PCE) and voltage conversion ratio (VCR). The proposed switch controller for offset calibration uses dynamic logic circuits and reduces power overhead that NOR-based set-reset latches and edge detectors of conventional switch controllers cause. Under 200-Ω loading and 5-V output, the proposed comparator and controller reduce power consumption by up to 73% and 24% in simulations compared with the conventional comparator and controller, respectively. This paper is implemented with 5-V devices of a 0.35-μm CMOS process to support high voltage. A peak PCE of 89.0%, a peak VCR of 90.1%, and a maximum output power of 126.7 mW are measured for 200-Ω loading.
- 22 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 26 (10) , 2050-2060
A 13.56-MHz CMOS Active Rectifier With a Voltage Mode Switched-Offset Comparator for Implantable Medical Devices
This paper presents low-power circuit techniques for comparators and controllers to reduce increasing power loss of an active diode with offset/delay calibration in a 13.56-MHz CMOS active rectifier. Unlike a conventional switched-offset comparator, the proposed voltage-mode switched-offset comparator reuses its bias current to generate continuously adjustable offset voltage, thereby reducing power loss. Offset calibration for accurate switching is adopted to improve power conversion efficiency (PCE) and voltage conversion ratio (VCR). The proposed switch controller for offset calibration uses dynamic logic circuits and reduces power overhead that NOR-based set-reset latches and edge detectors of conventional switch controllers cause. Under 200-Ω loading and 5-V output, the proposed comparator and controller reduce power consumption by up to 73% and 24% in simulations compared with the conventional comparator and controller, respectively. This paper is implemented with 5-V devices of a 0.35-μm CMOS process to support high voltage. A peak PCE of 89.0%, a peak VCR of 90.1%, and a maximum output power of 126.7 mW are measured for 200-Ω loading.
- 19 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (11) , 8982-8992
Search for Optimal Pulse Charging Parameters for Li-Ion Polymer Batteries Using Taguchi Orthogonal Arrays
Many methods have been proposed for faster and better battery charging with increased energy efficiencies. One of the most promising has been the pulse charge algorithm-also referred to as a pulse charging technique. Many researchers have investigated the impact of pulse charging on lithium-ion batteries. However, the combined impact of duty cycle and frequency of the pulse charge current on lithium-ion polymer batteries is seldom investigated. This work uses the Taguchi orthogonal arrays to search for optimal pulse charging parameters that will maximize battery charge and energy efficiencies while decreasing charge time. Confirmation experiments were performed and compared with the benchmark constant current-constant voltage (CC-CV) charging method. It was determined that by operating a pulse charger using optimal parameters, charge time was reduced by 47.6%, and battery charge and energy efficiencies were increased by 1.5% and 11.3%, respectively, when compared with the CC-CV charging method at a charge rate of 0.5 C.
- 19 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (11) , 8982-8992
Search for Optimal Pulse Charging Parameters for Li-Ion Polymer Batteries Using Taguchi Orthogonal Arrays
Many methods have been proposed for faster and better battery charging with increased energy efficiencies. One of the most promising has been the pulse charge algorithm-also referred to as a pulse charging technique. Many researchers have investigated the impact of pulse charging on lithium-ion batteries. However, the combined impact of duty cycle and frequency of the pulse charge current on lithium-ion polymer batteries is seldom investigated. This work uses the Taguchi orthogonal arrays to search for optimal pulse charging parameters that will maximize battery charge and energy efficiencies while decreasing charge time. Confirmation experiments were performed and compared with the benchmark constant current-constant voltage (CC-CV) charging method. It was determined that by operating a pulse charger using optimal parameters, charge time was reduced by 47.6%, and battery charge and energy efficiencies were increased by 1.5% and 11.3%, respectively, when compared with the CC-CV charging method at a charge rate of 0.5 C.
- 15 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (9) , 7383-7394
An Efficient and Fast Li-Ion Battery Charging System Using Energy Harvesting or Conventional Sources
This paper presents a multi-input battery charging system that is capable of increasing the charging efficiency of lithium-ion (Li-ion) batteries. The proposed battery charging system consists of three main building blocks: a pulse charger, a step-down dc-dc converter, and a power path controller. The pulse charger allows charging via a wall outlet or an energy harvesting system. It implements charge techniques that increase the battery charge efficiency of a Li-ion battery. The power path controller (PPC) functions as a power monitor and selects the optimal path for charging either via an energy harvesting system or an ac adapter. The step-down dc-dc converter provides an initial supply voltage to start up the energy harvesting system. The integrated circuit design is implemented on a CMOS 0.18 μm technology process. Experimental results verify that the proposed pulse charger reduces the charging time of 100 mAh and 45 mAh Li-ion batteries respectively by 37.35% and 15.56% and improves the charge efficiency by 3.15% and 3.27% when compared to the benchmark constant current-constant voltage charging technique. The step-down dc-dc converter has a maximum efficiency of 90% and the operation of the PPC is also verified by charging the battery via a thermoelectric energy harvesting system.
- 15 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (9) , 7383-7394
An Efficient and Fast Li-Ion Battery Charging System Using Energy Harvesting or Conventional Sources
This paper presents a multi-input battery charging system that is capable of increasing the charging efficiency of lithium-ion (Li-ion) batteries. The proposed battery charging system consists of three main building blocks: a pulse charger, a step-down dc-dc converter, and a power path controller. The pulse charger allows charging via a wall outlet or an energy harvesting system. It implements charge techniques that increase the battery charge efficiency of a Li-ion battery. The power path controller (PPC) functions as a power monitor and selects the optimal path for charging either via an energy harvesting system or an ac adapter. The step-down dc-dc converter provides an initial supply voltage to start up the energy harvesting system. The integrated circuit design is implemented on a CMOS 0.18 μm technology process. Experimental results verify that the proposed pulse charger reduces the charging time of 100 mAh and 45 mAh Li-ion batteries respectively by 37.35% and 15.56% and improves the charge efficiency by 3.15% and 3.27% when compared to the benchmark constant current-constant voltage charging technique. The step-down dc-dc converter has a maximum efficiency of 90% and the operation of the PPC is also verified by charging the battery via a thermoelectric energy harvesting system.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 174-179
A universal fast battery charging and management solution for stand-alone solar photovoltaic home systems in Sub-Saharan Africa
The development of the energy sector and the corresponding universal access to electricity is crucial in the developmental growth of any nation. Sub-Saharan Africa with its massive population, a thirteenth of the world's population, currently has only 31.69% of its people with access to electricity. Considering the remote locations of most `unelectrified' communities, it becomes almost impossible to achieve universal access to electricity without considering stand-alone solar systems. Stand-alone solar photovoltaic systems cannot be considered without taking into account energy storage and their associated charging systems. As access to electricity has been directly linked to affordability, there is the need to make such systems affordable, versatile, and long lasting. Designing charging systems that improve the performance of the energy storage solutions used in stand-alone applications thus becomes important in the overall utilization of stand-alone solar photovoltaic systems. This paper presents a universal battery charging, management, and equalization system that focuses on fast charging, increased battery life cycle, and adaptability to different battery technologies. The proposed battery charging and management system incorporates a front-end dc-dc converter with maximum power point tracking, a novel pulse charger, and a battery pack equalization circuit for effective energy distribution. Preliminary results take into account the different charging scenarios and variability of sunlight to ensure that the proposed system is adaptable to various conditions. Simulation analysis is modeled after a 100 W solar panel charging a 12.6 V 25 Ah battery.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 174-179
A universal fast battery charging and management solution for stand-alone solar photovoltaic home systems in Sub-Saharan Africa
The development of the energy sector and the corresponding universal access to electricity is crucial in the developmental growth of any nation. Sub-Saharan Africa with its massive population, a thirteenth of the world's population, currently has only 31.69% of its people with access to electricity. Considering the remote locations of most `unelectrified' communities, it becomes almost impossible to achieve universal access to electricity without considering stand-alone solar systems. Stand-alone solar photovoltaic systems cannot be considered without taking into account energy storage and their associated charging systems. As access to electricity has been directly linked to affordability, there is the need to make such systems affordable, versatile, and long lasting. Designing charging systems that improve the performance of the energy storage solutions used in stand-alone applications thus becomes important in the overall utilization of stand-alone solar photovoltaic systems. This paper presents a universal battery charging, management, and equalization system that focuses on fast charging, increased battery life cycle, and adaptability to different battery technologies. The proposed battery charging and management system incorporates a front-end dc-dc converter with maximum power point tracking, a novel pulse charger, and a battery pack equalization circuit for effective energy distribution. Preliminary results take into account the different charging scenarios and variability of sunlight to ensure that the proposed system is adaptable to various conditions. Simulation analysis is modeled after a 100 W solar panel charging a 12.6 V 25 Ah battery.
- 1 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 15483746,p. 330-333
A switched mode Li-ion battery charger with multiple energy harvesting systems simultaneously used as input sources
Energy harvesting is a green source of energy which can help reduce the maintenance cost in the frequent replacement of batteries, reduce pollution, and enable the long term powering of devices in places that are not easily accessible. In recent past, systems have been proposed to use energy harvesting systems to charge energy storage devices. This paper presents a simple but effective solution to combine multiple energy harvesting systems simultaneously for battery charging. This ensures the effective use of environmental energy for the powering of microsystems at all times. The proposed system has a monitoring interface, which monitors the energy harvesting systems' outputs, combined with a battery charger to charge a Li-ion battery, thereby providing an approach which ensures that the battery can always be charged using green energy. The simulation of the system's behavior takes into account the variable nature of the different energy harvesting sources to ensure that the presented system is a viable option when dealing with multiple energy harvesting systems and Li-ion battery charging.
- 1 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 15483746,p. 330-333
A switched mode Li-ion battery charger with multiple energy harvesting systems simultaneously used as input sources
Energy harvesting is a green source of energy which can help reduce the maintenance cost in the frequent replacement of batteries, reduce pollution, and enable the long term powering of devices in places that are not easily accessible. In recent past, systems have been proposed to use energy harvesting systems to charge energy storage devices. This paper presents a simple but effective solution to combine multiple energy harvesting systems simultaneously for battery charging. This ensures the effective use of environmental energy for the powering of microsystems at all times. The proposed system has a monitoring interface, which monitors the energy harvesting systems' outputs, combined with a battery charger to charge a Li-ion battery, thereby providing an approach which ensures that the battery can always be charged using green energy. The simulation of the system's behavior takes into account the variable nature of the different energy harvesting sources to ensure that the presented system is a viable option when dealing with multiple energy harvesting systems and Li-ion battery charging.
- 1 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 467-470
SmartShelter: A Sustainable power system design using energy harvesting techniques
In the event of a large-scale natural disaster, families and nations are often unprepared for post-disaster living conditions. Disaster relief shelters are inadequate replacements for destroyed homes; the crowded living space stimulates the spread of illnesses and the lack of electricity exacerbates psychological stress. A modernized shelter equipped with electricity and structural integrity would address several issues imposed by current disaster relief shelter. Using micro-energy harvesting techniques, a SmartShelter has the ability to locally generate sufficient amounts of electricity and provide adequate protection for natural disaster victims. Through its novel design, the SmartShelter utilizes solar, thermal, piezoelectric, and radiofrequency energy harvesting modules to sustain electricity generation and strategically support structural integrity. As a proof-of-concept design, a prototype SmartShelter is proposed using commercially available energy harvesting modules. With this prototype, it will be proven that micro-energy harvesting techniques may be utilized to generate sufficient amounts of power to sustain a low-power generating system.
- 1 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 467-470
SmartShelter: A Sustainable power system design using energy harvesting techniques
In the event of a large-scale natural disaster, families and nations are often unprepared for post-disaster living conditions. Disaster relief shelters are inadequate replacements for destroyed homes; the crowded living space stimulates the spread of illnesses and the lack of electricity exacerbates psychological stress. A modernized shelter equipped with electricity and structural integrity would address several issues imposed by current disaster relief shelter. Using micro-energy harvesting techniques, a SmartShelter has the ability to locally generate sufficient amounts of electricity and provide adequate protection for natural disaster victims. Through its novel design, the SmartShelter utilizes solar, thermal, piezoelectric, and radiofrequency energy harvesting modules to sustain electricity generation and strategically support structural integrity. As a proof-of-concept design, a prototype SmartShelter is proposed using commercially available energy harvesting modules. With this prototype, it will be proven that micro-energy harvesting techniques may be utilized to generate sufficient amounts of power to sustain a low-power generating system.