Andrés Zelcer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrés Zelcer has a total of 106 co-authors. Here are the top co-authors by number of shared publications:
- Galo Juan de Ávila Arturo Soler Illia
Instituto de Nanosistemas (INS) Escuela de Bio y Nanotecnología (EByN) Universidad Nacional de General San Martín San Martín Buenos Aires Argentina
11 shared publications - Bertrand Donnio
Institut de Physique et Chimie des Matériaux de Strasbourg (IPCMS)
5 shared publications - Glenna L. Drisko
CNRS Bordeaux INP ICMCB UMR5026 University of Bordeaux Pessac 33600 France
4 shared publications Daniel Guillon
Institut de Physique et Chimie des Matériaux de Strasbourg (IPCMS), Université de Strasbourg – CNRS, Strasbourg, France
3 shared publicationsFabio D. Cukiernik
Departamento de Química Inorgánica, Analítica y Química Física, Facultad de Ciencias Exactas y Naturales, UBA, Buenos Aires, Argentina
3 shared publications- Fabio Daniel Cukiernik
Departamento de Química Inorgánica, Analítica y Química Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Argentina
3 shared publications
Latest Publications
- 19 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (34) , 16403-16415
Mesoporous Thin Films as Nanoreactors for Complex Oxide Nanoparticle-Based Devices
We combine for the first time the properties of ordered mesoporous thin films and complex oxide nanoparticles in the design of heterostructures, taking advantage of the accessible tridimensional pore network. In this work, we demonstrate the feasibility of synthesizing La0.88Sr0.12MnO3 inside the pores of a mesoporous SiO2 thin film, using pulsed laser deposition. In order to understand the filling process, a set of samples were deposited for three different deposition times on mesoporous and nonmesoporous SiO2 substrates. Their structural, magnetic, magnetocaloric, and electrical transport properties were studied. All of the results evidence the presence of the manganite compound inside the pores, which was confirmed by cross-sectional elemental mapping. X-ray reflectometry shows that it is possible to control the filling of the pores, keeping some accessible porosity. The magnetic behavior suggests the presence of weakly interacting ferromagnetic nanoparticles inside the pores. We provide here a successful strategy for the fabrication of complex oxide nanoparticle arrays with highly controlled size and ordering. Their easy incorporation into micro- and nanofabrication procedures unveils direct implications in the field of interfaces and nanoparticle devices as diverse as energy conversion systems, solid oxide fuel cells, spintronics, and neuromorphic memristor networks.
- 19 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (34) , 16403-16415
Mesoporous Thin Films as Nanoreactors for Complex Oxide Nanoparticle-Based Devices
We combine for the first time the properties of ordered mesoporous thin films and complex oxide nanoparticles in the design of heterostructures, taking advantage of the accessible tridimensional pore network. In this work, we demonstrate the feasibility of synthesizing La0.88Sr0.12MnO3 inside the pores of a mesoporous SiO2 thin film, using pulsed laser deposition. In order to understand the filling process, a set of samples were deposited for three different deposition times on mesoporous and nonmesoporous SiO2 substrates. Their structural, magnetic, magnetocaloric, and electrical transport properties were studied. All of the results evidence the presence of the manganite compound inside the pores, which was confirmed by cross-sectional elemental mapping. X-ray reflectometry shows that it is possible to control the filling of the pores, keeping some accessible porosity. The magnetic behavior suggests the presence of weakly interacting ferromagnetic nanoparticles inside the pores. We provide here a successful strategy for the fabrication of complex oxide nanoparticle arrays with highly controlled size and ordering. Their easy incorporation into micro- and nanofabrication procedures unveils direct implications in the field of interfaces and nanoparticle devices as diverse as energy conversion systems, solid oxide fuel cells, spintronics, and neuromorphic memristor networks.
- Open Access
- 20 November 2025
- Published by Springer Nature in Light: Science & Applications
- Vol. 14 (1) , 385
Open-source sub-nanometer stabilization system for super-resolution fluorescence microscopy
Recent advances in fluorescence nanoscopy have pushed resolution to the 1–10 nm range, enabling the direct visualization of individual molecules even in crowded biological environments. Achieving this level of precision requires rigorous sample drift control. Techniques such as MINFLUX and RASTMIN, which rely on keeping the sample fixed within an excitation pattern, demand active drift correction to achieve their theoretical nanometer-scale resolution limits. Here, we present an active stabilization system for super-resolution microscopy that delivers sub-nm precision for hours. Featuring a simple optical design, the system can be added as a separate module to any fluorescence microscope. We also provide an open-source control software including a user-friendly graphical interface readily adaptable to different setups. We demonstrate the adaptability and performance of the stabilization system with p-MINFLUX and RASTMIN measurements performed in two different setups, reaching the theoretical Cramér-Rao Bound and resolving ~10 nm distances within DNA origami structures.
- 20 November 2025
- Published by Springer Nature in Light: Science & Applications
- Vol. 14 (1) , 385
Open AccessOpen-source sub-nanometer stabilization system for super-resolution fluorescence microscopy
Recent advances in fluorescence nanoscopy have pushed resolution to the 1–10 nm range, enabling the direct visualization of individual molecules even in crowded biological environments. Achieving this level of precision requires rigorous sample drift control. Techniques such as MINFLUX and RASTMIN, which rely on keeping the sample fixed within an excitation pattern, demand active drift correction to achieve their theoretical nanometer-scale resolution limits. Here, we present an active stabilization system for super-resolution microscopy that delivers sub-nm precision for hours. Featuring a simple optical design, the system can be added as a separate module to any fluorescence microscope. We also provide an open-source control software including a user-friendly graphical interface readily adaptable to different setups. We demonstrate the adaptability and performance of the stabilization system with p-MINFLUX and RASTMIN measurements performed in two different setups, reaching the theoretical Cramér-Rao Bound and resolving ~10 nm distances within DNA origami structures.
- 8 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (41) , 27713-27723
Self-Aggregation of Sodium Ibuprofenate in Water. I. Deriving the Speciation Diagram from Ibuprofenate Fluorescence
The self-aggregation process of sodium ibuprofenate in water was fully characterized using both steady-state and time-resolved fluorescence techniques. Changes in the fluorescence properties of the amphiphilic ion in water were analyzed as a function of its analytical concentration, enabling the quantitative determination of the complete speciation diagram without needing external probes. The differential reabsorption model, introduced in a previous work as a key tool for the quantitative analysis of steady-state fluorescence, is here complemented by a newly developed kinetic model designed to interpret recent time-resolved fluorescence data. The integration of these two approaches enables the simultaneous retrieval of the speciation diagram and the photophysical properties of both free ibuprofenate and the micellar-like aggregates. This combined methodology offers a novel and powerful tool for analyzing the self-aggregation behavior of fluorescent amphipathic compounds.
- 8 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (41) , 27713-27723
Self-Aggregation of Sodium Ibuprofenate in Water. I. Deriving the Speciation Diagram from Ibuprofenate Fluorescence
The self-aggregation process of sodium ibuprofenate in water was fully characterized using both steady-state and time-resolved fluorescence techniques. Changes in the fluorescence properties of the amphiphilic ion in water were analyzed as a function of its analytical concentration, enabling the quantitative determination of the complete speciation diagram without needing external probes. The differential reabsorption model, introduced in a previous work as a key tool for the quantitative analysis of steady-state fluorescence, is here complemented by a newly developed kinetic model designed to interpret recent time-resolved fluorescence data. The integration of these two approaches enables the simultaneous retrieval of the speciation diagram and the photophysical properties of both free ibuprofenate and the micellar-like aggregates. This combined methodology offers a novel and powerful tool for analyzing the self-aggregation behavior of fluorescent amphipathic compounds.
- 2 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (41) , 27724-27736
Self-Aggregation of Sodium Ibuprofenate in Water. II. Equilibrium Modeling and Structural Characterization from Simulation and SAXS Experiments
A complete characterization of the self-aggregation process of sodium ibuprofenate (NaIbu) in water is presented based on both scattering experiments and computer simulation techniques. The micellization process was rationalized in terms of the classical mass-action model. Microscopic details about the aggregation number and the degree of ionization of the aggregates, which are necessary to achieve the aforementioned description, were obtained from molecular dynamics simulations and small-angle X-ray scattering (SAXS) experiments. Molecular dynamics simulations showed the existence of ellipsoidal stable micelles with characteristic lengths on the order of ∼20 Å, an average aggregation number of nIbu = 45 ibuprofenate molecules, and a degree of micelle ionization α = 0.63. SAXS experiments revealed similar structural characteristics and low polydispersity across a wide NaIbu concentration range above the critical micellar concentration, reinforcing the results obtained from the simulations. By combining data from molecular dynamics simulations and time-resolved experiments within the framework of the Burchfield and Woolley model for the activities of all the species involved, values of In(KAgg) = 41, = 45, and α = 0.64 were determined, along with a corresponding value for the critical micellar concentration of 0.185 m for the equilibrium aggregation model. Findings regarding the modulation of the dynamical modes of ibuprofenate imposed by the restricted micellar environment and its potential influence on the photochemical response of the probe were also reported and discussed in the context of the photophysical experimental data previously measured by our group.
- 2 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (41) , 27724-27736
Self-Aggregation of Sodium Ibuprofenate in Water. II. Equilibrium Modeling and Structural Characterization from Simulation and SAXS Experiments
A complete characterization of the self-aggregation process of sodium ibuprofenate (NaIbu) in water is presented based on both scattering experiments and computer simulation techniques. The micellization process was rationalized in terms of the classical mass-action model. Microscopic details about the aggregation number and the degree of ionization of the aggregates, which are necessary to achieve the aforementioned description, were obtained from molecular dynamics simulations and small-angle X-ray scattering (SAXS) experiments. Molecular dynamics simulations showed the existence of ellipsoidal stable micelles with characteristic lengths on the order of ∼20 Å, an average aggregation number of nIbu = 45 ibuprofenate molecules, and a degree of micelle ionization α = 0.63. SAXS experiments revealed similar structural characteristics and low polydispersity across a wide NaIbu concentration range above the critical micellar concentration, reinforcing the results obtained from the simulations. By combining data from molecular dynamics simulations and time-resolved experiments within the framework of the Burchfield and Woolley model for the activities of all the species involved, values of In(KAgg) = 41, = 45, and α = 0.64 were determined, along with a corresponding value for the critical micellar concentration of 0.185 m for the equilibrium aggregation model. Findings regarding the modulation of the dynamical modes of ibuprofenate imposed by the restricted micellar environment and its potential influence on the photochemical response of the probe were also reported and discussed in the context of the photophysical experimental data previously measured by our group.
- Open Access
- 17 April 2025
- Published by Springer Nature in Research Square
Open-source Sub-Nanometer Stabilization System for Super-resolution Fluorescence Microscopy
Recent advances in fluorescence nanoscopy have pushed resolution to the 1-10 nm range, enabling the direct visualization of individual molecules even in crowded biological environments. Achieving this level of precision requires rigorous sample drift control. Techniques such as MINFLUX and RASTMIN, which rely on keeping the sample fixed within an excitation pattern, demand active drift correction to achieve their theoretical nanometer-scale resolution limits. Here, we present an active stabilization system for super-resolution microscopy that delivers sub-nm precision for hours. Featuring a simple optical design, the system can be added as a separate module to any fluorescence microscope. We also provide an open-source control software including a user-friendly graphical interface readily adaptable to different setups. We demonstrate the adaptability and performance of the stabilization system with p-MINFLUX and RASTMIN measurements performed in two different setups reaching the theoretical Cramér-Rao Bound and resolving ~10 nm distances within DNA origami structures.
- 17 April 2025
- Published by Springer Nature in Research Square
Open AccessOpen-source Sub-Nanometer Stabilization System for Super-resolution Fluorescence Microscopy
Recent advances in fluorescence nanoscopy have pushed resolution to the 1-10 nm range, enabling the direct visualization of individual molecules even in crowded biological environments. Achieving this level of precision requires rigorous sample drift control. Techniques such as MINFLUX and RASTMIN, which rely on keeping the sample fixed within an excitation pattern, demand active drift correction to achieve their theoretical nanometer-scale resolution limits. Here, we present an active stabilization system for super-resolution microscopy that delivers sub-nm precision for hours. Featuring a simple optical design, the system can be added as a separate module to any fluorescence microscope. We also provide an open-source control software including a user-friendly graphical interface readily adaptable to different setups. We demonstrate the adaptability and performance of the stabilization system with p-MINFLUX and RASTMIN measurements performed in two different setups reaching the theoretical Cramér-Rao Bound and resolving ~10 nm distances within DNA origami structures.
- 8 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (2) , 894-902
Tuning Electrochemical Properties and Thermal Stability of YSZ Mesoporous Thin Films for SOFC Applications
- 8 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (2) , 894-902
Tuning Electrochemical Properties and Thermal Stability of YSZ Mesoporous Thin Films for SOFC Applications
- 2 October 2023
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 232, 113576
Plasmonic inhibition of bacterial adhesion on gold-decorated mesoporous zirconium oxide thin films
- 2 October 2023
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 232, 113576
Plasmonic inhibition of bacterial adhesion on gold-decorated mesoporous zirconium oxide thin films
- Open Access
- 14 April 2023
- Published by Springer Nature
- p. 22
Bicontinuous Porosity By Spinodal Phase Separation
- 14 April 2023
- Published by Springer Nature
- p. 22
Open AccessBicontinuous Porosity By Spinodal Phase Separation
- 4 June 2022
- Published by Springer Nature in Photochemical & Photobiological Sciences
- Vol. 21 (9) , 1637-1645
Ibuprofen molecular aggregation by direct back-face transmission steady-state fluorescence
Direct back-face transmission steady-state fluorescence was successfully applied to the study of aggregation of ibuprofen and ibuprofenate anion in solution taking advantage of its own fluorescence. The analysis of the experimental data involves the use of the differential reabsorption model to account for re-absorption phenomenon and the closed association model to describe aggregation. The fluorescence quantum yield of ibuprofenate increases when it aggregates in the presence of sodium, but it markedly decreases when 1-butyl-3-methylimidazolium is used as counterion. The proposed methodology allows the accurate determination of the critical aggregation concentrations and the mean aggregation numbers. Results were supported by complementary techniques such as time-resolved fluorescence, 1H-NMR and small-angle neutron and X-ray scattering. The developed technique constitutes a promising strategy to characterize the aggregation of poorly fluorescent surfactants that aggregates at high concentrations and hence at high absorbance values, conditions in which the most common right-angle configuration for fluorescence acquisition is troublesome due to re-absorption. Graphical abstract
- 4 June 2022
- Published by Springer Nature in Photochemical & Photobiological Sciences
- Vol. 21 (9) , 1637-1645
Ibuprofen molecular aggregation by direct back-face transmission steady-state fluorescence
Direct back-face transmission steady-state fluorescence was successfully applied to the study of aggregation of ibuprofen and ibuprofenate anion in solution taking advantage of its own fluorescence. The analysis of the experimental data involves the use of the differential reabsorption model to account for re-absorption phenomenon and the closed association model to describe aggregation. The fluorescence quantum yield of ibuprofenate increases when it aggregates in the presence of sodium, but it markedly decreases when 1-butyl-3-methylimidazolium is used as counterion. The proposed methodology allows the accurate determination of the critical aggregation concentrations and the mean aggregation numbers. Results were supported by complementary techniques such as time-resolved fluorescence, 1H-NMR and small-angle neutron and X-ray scattering. The developed technique constitutes a promising strategy to characterize the aggregation of poorly fluorescent surfactants that aggregates at high concentrations and hence at high absorbance values, conditions in which the most common right-angle configuration for fluorescence acquisition is troublesome due to re-absorption. Graphical abstract
- 23 November 2021
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 102 (1) , 208-218
Nanoencapsulation of isotropic and anisotropic particles through a green chemistry aerosol method: a scalable approach for ad-hoc surface tuning
- 23 November 2021
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 102 (1) , 208-218
Nanoencapsulation of isotropic and anisotropic particles through a green chemistry aerosol method: a scalable approach for ad-hoc surface tuning