Luize Scalco de Vasconcelos
Research Subjects
Luize Scalco de Vasconcelos has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Kejie Zhao
School of Mechanical Engineering, Purdue University, West Lafayette, USA
8 shared publications - Rong Xu
State Key Laboratory for Strength and Vibration of Mechanical Structures, Department of Engineering Mechanics, Xi’an Jiaotong University, Xi’an, China
7 shared publications Kejie Zhao
Purdue University
3 shared publications- Jianlin Li
Applied Materials Division Argonne National Laboratory Lemont IL 60439 USA
2 shared publications Andre L. Christoforo
Universidade Federal de São João del Rei
1 shared publicationAndré Luis Christoforo
1 shared publication
Latest Publications
- 7 July 2022
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 22 (14) , 5883-5890
Asynchronous-to-Synchronous Transition of Li Reactions in Solid-Solution Cathodes
The composition dynamics regulate the accessible capacity and rate performance of rechargeable batteries. Heterogeneous Li reactions can lead to nonuniform electrochemical activities and amplify mechanical damage in the cell. Here, we employ operando optical microscopy as a laboratory tool to map the spatial composition heterogeneity in a solid-solution cathode for Li-ion batteries. The experiments are conducted at slow charging conditions to investigate the thermodynamic origins. We observe that the active particles charge asynchronously with reaction fronts propagating on the particle surfaces during the first charge, while subsequent (dis)charge cycles transition to a synchronous behavior for the same group of particles. Such transition is understood by computational modeling, which incorporates the dependence of Li diffusivity and interfacial reaction rate on the state of charge. The optical experiments and theoretical modeling provide insight into the reaction heterogeneity of porous electrodes and electrochemical conditioning for layered oxide cathodes.
- 7 July 2022
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 22 (14) , 5883-5890
Asynchronous-to-Synchronous Transition of Li Reactions in Solid-Solution Cathodes
The composition dynamics regulate the accessible capacity and rate performance of rechargeable batteries. Heterogeneous Li reactions can lead to nonuniform electrochemical activities and amplify mechanical damage in the cell. Here, we employ operando optical microscopy as a laboratory tool to map the spatial composition heterogeneity in a solid-solution cathode for Li-ion batteries. The experiments are conducted at slow charging conditions to investigate the thermodynamic origins. We observe that the active particles charge asynchronously with reaction fronts propagating on the particle surfaces during the first charge, while subsequent (dis)charge cycles transition to a synchronous behavior for the same group of particles. Such transition is understood by computational modeling, which incorporates the dependence of Li diffusivity and interfacial reaction rate on the state of charge. The optical experiments and theoretical modeling provide insight into the reaction heterogeneity of porous electrodes and electrochemical conditioning for layered oxide cathodes.
- 27 June 2022
- Published by Wiley in Journal of Applied Mechanics
- Vol. 89 (8)
Computational Modeling of Electrochemomechanics of High-Capacity Composite Electrodes in Li-Ion Batteries
Mechanical failure and its interference with electrochemistry are a roadblock in deploying high-capacity electrodes for Li-ion batteries. Computational prediction of the electrochemomechanical behavior of high-capacity composite electrodes is a significant challenge because of (i) complex interplay between mechanics and electrochemistry in the form of stress-regulated Li transport and interfacial charge transfer, (ii) thermodynamic solution non-ideality, (iii) nonlinear deformation kinematics and material inelasticity, and (iv) evolving material properties over the state of charge. We develop a computational framework that integrates the electrochemical response of batteries modulated by large deformation, mechanical stresses, and dynamic material properties. We use silicon as a model system and construct a microstructurally resolved porous composite electrode model. The model concerns the effect of large deformation of silicon on charge conduction and electrochemical response of the composite electrode, impact of mechanical stress on Li transport and interfacial charge transfer, and asymmetric charging/discharging kinetics. The study captures the rate-dependent, coupled electrochemomechanical behavior of high-capacity composite electrodes that agrees well with experimental results.
- 27 June 2022
- Published by Wiley in Journal of Applied Mechanics
- Vol. 89 (8)
Computational Modeling of Electrochemomechanics of High-Capacity Composite Electrodes in Li-Ion Batteries
Mechanical failure and its interference with electrochemistry are a roadblock in deploying high-capacity electrodes for Li-ion batteries. Computational prediction of the electrochemomechanical behavior of high-capacity composite electrodes is a significant challenge because of (i) complex interplay between mechanics and electrochemistry in the form of stress-regulated Li transport and interfacial charge transfer, (ii) thermodynamic solution non-ideality, (iii) nonlinear deformation kinematics and material inelasticity, and (iv) evolving material properties over the state of charge. We develop a computational framework that integrates the electrochemical response of batteries modulated by large deformation, mechanical stresses, and dynamic material properties. We use silicon as a model system and construct a microstructurally resolved porous composite electrode model. The model concerns the effect of large deformation of silicon on charge conduction and electrochemical response of the composite electrode, impact of mechanical stress on Li transport and interfacial charge transfer, and asymmetric charging/discharging kinetics. The study captures the rate-dependent, coupled electrochemomechanical behavior of high-capacity composite electrodes that agrees well with experimental results.
- 1 November 2020
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 144, 104102
Quantitative spatiotemporal Li profiling using nanoindentation
- 1 November 2020
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 144, 104102
Quantitative spatiotemporal Li profiling using nanoindentation
- Open Access
- 10 January 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-10
Mechanical breathing in organic electrochromics
The repetitive size change of the electrode over cycles, termed as mechanical breathing, is a crucial issue limiting the quality and lifetime of organic electrochromic devices. The mechanical deformation originates from the electron transport and ion intercalation in the redox active material. The dynamics of the state of charge induces drastic changes of the microstructure and properties of the host, and ultimately leads to structural disintegration at the interfaces. We quantify the breathing strain and the evolution of the mechanical properties of poly(3,4-propylenedioxythiophene) thin films in-situ using customized environmental nanoindentation. Upon oxidation, the film expands nearly 30% in volume, and the elastic modulus and hardness decrease by a factor of two. We perform theoretical modeling to understand thin film delamination from an indium tin oxide (ITO) current collector under cyclic load. We show that toughening the interface with roughened or silica-nanoparticle coated ITO surface significantly improves the cyclic performance.
- 10 January 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-10
Open AccessMechanical breathing in organic electrochromics
The repetitive size change of the electrode over cycles, termed as mechanical breathing, is a crucial issue limiting the quality and lifetime of organic electrochromic devices. The mechanical deformation originates from the electron transport and ion intercalation in the redox active material. The dynamics of the state of charge induces drastic changes of the microstructure and properties of the host, and ultimately leads to structural disintegration at the interfaces. We quantify the breathing strain and the evolution of the mechanical properties of poly(3,4-propylenedioxythiophene) thin films in-situ using customized environmental nanoindentation. Upon oxidation, the film expands nearly 30% in volume, and the elastic modulus and hardness decrease by a factor of two. We perform theoretical modeling to understand thin film delamination from an indium tin oxide (ITO) current collector under cyclic load. We show that toughening the interface with roughened or silica-nanoparticle coated ITO surface significantly improves the cyclic performance.
- 1 May 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-01 (4) , 478
Correlation between Pulse Charging, Volume Expansion and Structural Degradation in Silicon Electrodes for Li-Ion Batteries
Silicon electrodes experience substantial volume expansion upon lithium insertion. The volume change is approximately linear with Li concentration which leads to a constant rate of expansion under galvanostatic charging. Interestingly, recent experiments have revealed that the rate of expansion (or contraction) spikes immediately following the application of a constant current, before converging to the lower, steady state value. This effect is seen throughout the entire range of charge and slowly fades away in the course of electrochemical cycles. The volumetric shock can have important implications on the structural stability of strain-rate sensitive materials during pulsed charging. In this work, we use operando nanoindentation to study the effect of the pulse frequency on the rate of expansion and structural evolution of silicon thin films. The electrode is subjected to intermittent step galvanostatic (dis)charge, and the volumetric response is recorded in the course of multiple cycles. The structural degradation is characterized via in-situ optical microscopy and possible mechanisms leading to experimental observations are discussed accordingly.
- 1 May 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-01 (4) , 478
Correlation between Pulse Charging, Volume Expansion and Structural Degradation in Silicon Electrodes for Li-Ion Batteries
Silicon electrodes experience substantial volume expansion upon lithium insertion. The volume change is approximately linear with Li concentration which leads to a constant rate of expansion under galvanostatic charging. Interestingly, recent experiments have revealed that the rate of expansion (or contraction) spikes immediately following the application of a constant current, before converging to the lower, steady state value. This effect is seen throughout the entire range of charge and slowly fades away in the course of electrochemical cycles. The volumetric shock can have important implications on the structural stability of strain-rate sensitive materials during pulsed charging. In this work, we use operando nanoindentation to study the effect of the pulse frequency on the rate of expansion and structural evolution of silicon thin films. The electrode is subjected to intermittent step galvanostatic (dis)charge, and the volumetric response is recorded in the course of multiple cycles. The structural degradation is characterized via in-situ optical microscopy and possible mechanisms leading to experimental observations are discussed accordingly.
- 28 November 2018
- Published by Springer Nature in Experimental Mechanics
- Vol. 59 (3) , 337-347
In-Situ Nanoindentation Measurement of Local Mechanical Behavior of a Li-Ion Battery Cathode in Liquid Electrolyte
- 28 November 2018
- Published by Springer Nature in Experimental Mechanics
- Vol. 59 (3) , 337-347
In-Situ Nanoindentation Measurement of Local Mechanical Behavior of a Li-Ion Battery Cathode in Liquid Electrolyte
- Open Access
- 29 November 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (14) , A3840-A3847
Operando Nanoindentation: A New Platform to Measure the Mechanical Properties of Electrodes during Electrochemical Reactions
We present an experimental platform of operando nanoindentation that probes the dynamic mechanical behaviors of electrodes during real-time electrochemical reactions. The setup consists of a nanoindenter, an electrochemical station, and a custom fluid cell integrated into an inert environment. We evaluate the influence of the argon atmosphere, electrolyte solution, structural degradation and volumetric change of electrodes upon Li reactions, as well as the surface layer and substrate effects by control experiments. Results inform on the system limitations and capabilities, and provide guidelines on the best experimental practices. Furthermore, we present a thorough investigation of the elastic-viscoplastic properties of amorphous Si electrodes, during cell operation at different C-rates and at open circuit. Pure Li metal is characterized separately. We measure the continuous evolution of the elastic modulus, hardness, and creep stress exponent of lithiated Si and compare the results with prior reports. operando indentation will provide a reliable platform to understand the fundamental coupling between mechanics and electrochemistry in energy materials.
- 29 November 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (14) , A3840-A3847
Open AccessOperando Nanoindentation: A New Platform to Measure the Mechanical Properties of Electrodes during Electrochemical Reactions
We present an experimental platform of operando nanoindentation that probes the dynamic mechanical behaviors of electrodes during real-time electrochemical reactions. The setup consists of a nanoindenter, an electrochemical station, and a custom fluid cell integrated into an inert environment. We evaluate the influence of the argon atmosphere, electrolyte solution, structural degradation and volumetric change of electrodes upon Li reactions, as well as the surface layer and substrate effects by control experiments. Results inform on the system limitations and capabilities, and provide guidelines on the best experimental practices. Furthermore, we present a thorough investigation of the elastic-viscoplastic properties of amorphous Si electrodes, during cell operation at different C-rates and at open circuit. Pure Li metal is characterized separately. We measure the continuous evolution of the elastic modulus, hardness, and creep stress exponent of lithiated Si and compare the results with prior reports. operando indentation will provide a reliable platform to understand the fundamental coupling between mechanics and electrochemistry in energy materials.
- 7 October 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (13) , A3333-A3341
Mechanical and Structural Degradation of LiNixMnyCozO2Cathode in Li-Ion Batteries: An Experimental Study
LiNixMnyCozO2 (NMC) is the current choice of cathode for high-performance Li-ion batteries. The structural and mechanical stability of NMC plays a vital role in determining the electrochemical performance of batteries. However, the dynamic mechanical properties of NMC during Li reactions are widely unknown because of the microscopic heterogeneity of composite electrodes as well as the challenge of mechanical measurement for air-sensitive battery materials. We employ instrumented nanoindentation in an inert environment to measure the elastic modulus, hardness, and interfacial fracture strength of NMC of a hierarchical meatball structure as a function of the state of charge and cycle number. The mechanical properties significantly depend on the lithiation state and degrade as the electrochemical cycles proceed. The results are further compared with the properties of bulk NMC pellets. We perform first-principles theoretical modeling to understand the evolution of the elastic property of NMC on the basis of the electronic structure. This work presents the first time systematic mechanical measurement of NMC electrodes which characterizes damage accumulation in battery materials over cycles.
- 7 October 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (13) , A3333-A3341
Mechanical and Structural Degradation of LiNixMnyCozO2Cathode in Li-Ion Batteries: An Experimental Study
LiNixMnyCozO2 (NMC) is the current choice of cathode for high-performance Li-ion batteries. The structural and mechanical stability of NMC plays a vital role in determining the electrochemical performance of batteries. However, the dynamic mechanical properties of NMC during Li reactions are widely unknown because of the microscopic heterogeneity of composite electrodes as well as the challenge of mechanical measurement for air-sensitive battery materials. We employ instrumented nanoindentation in an inert environment to measure the elastic modulus, hardness, and interfacial fracture strength of NMC of a hierarchical meatball structure as a function of the state of charge and cycle number. The mechanical properties significantly depend on the lithiation state and degrade as the electrochemical cycles proceed. The results are further compared with the properties of bulk NMC pellets. We perform first-principles theoretical modeling to understand the evolution of the elastic property of NMC on the basis of the electronic structure. This work presents the first time systematic mechanical measurement of NMC electrodes which characterizes damage accumulation in battery materials over cycles.
- 12 May 2017
- Published by Springer Nature in Experimental Mechanics
- Vol. 58 (4) , 549-559
Disintegration of Meatball Electrodes for LiNi x Mn y Co z O2 Cathode Materials
- 12 May 2017
- Published by Springer Nature in Experimental Mechanics
- Vol. 58 (4) , 549-559
Disintegration of Meatball Electrodes for LiNi x Mn y Co z O2 Cathode Materials
- 1 December 2016
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 9, 495-502
Grid indentation analysis of mechanical properties of composite electrodes in Li-ion batteries
- 1 December 2016
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 9, 495-502
Grid indentation analysis of mechanical properties of composite electrodes in Li-ion batteries