Kyoko Ikeda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kyoko Ikeda has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
Changhai Liu
NSF National Center for Atmospheric Research (NCAR) Boulder CO USA
10 shared publicationsRoy Rasmussen
NSF National Center for Atmospheric Research (NCAR) Boulder CO USA
8 shared publications- Fei Chen
Division of Environment and Sustainability Hong Kong University of Science and Technology Hong Kong China
6 shared publications - Andreas Franz Prein
Institute for Atmospheric and Climate Science, ETH Zurich, 8092 Zurich, Switzerland
4 shared publications - Cenlin He
Research Applications Laboratory NSF National Center for Atmospheric Research Boulder CO USA
4 shared publications - Alberto Martilli
CIEMAT Madrid Spain
3 shared publications
Latest Publications
- Open Access
- 4 June 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (6)
Revisiting Snow Water Equivalent Bias in the Noah‐MP Land Surface Model in the Western U.S.
Land surface models (LSMs) are widely used to generate snow records, forecasts, and projections that support water research and management. The complex sources of uncertainty in LSMs motivate evaluations to better understand bias characteristics and identify underlying causes that guide model development. This study evaluates snow water equivalent (SWE) simulations over the western United States (WUS) from the Noah‐MP LSM, a key land component in widely used research and operational modeling systems. Noah‐MP driven by different atmospheric forcing data sets generally underestimates SWE relative to SNOw TELemetry observations, with biases partly explained by scale mismatches between point‐based measurements and model pixels. Despite systematic underestimation, Noah‐MP captures observed interannual variability of peak and mean SWE anomalies very well ( r = 0.99) and shows lower but still significant accuracy in simulating long‐term regional SWE trends and the spatial patterns of SWE trends ( r = 0.60). Comparisons with gridded reference data sets confirm Noah‐MP's high skill in simulating the regional daily timing ( r > 0.99), interannual variability, and pixel‐scale daily SWE ( r = 0.71–0.81). However, the simulations underestimate SWE by 9%–16%, with peak SWE occurring ∼4 days earlier and snow disappearing ∼35 days earlier than observed, reflecting overly rapid ablation across both cold and warm seasons. Spatial clustering analyses reveal regional heterogeneity in SWE bias characteristics and sensitivities to LSM parameterizations and meteorological forcing uncertainties. The presence of regional overestimation suggests that applying uniform model adjustments may degrade performance in certain areas. An updated combination of Noah‐MP physics options shows accuracy improvements, reducing both accumulation and ablation errors.
- 4 June 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (6)
Open AccessRevisiting Snow Water Equivalent Bias in the Noah‐MP Land Surface Model in the Western U.S.
Land surface models (LSMs) are widely used to generate snow records, forecasts, and projections that support water research and management. The complex sources of uncertainty in LSMs motivate evaluations to better understand bias characteristics and identify underlying causes that guide model development. This study evaluates snow water equivalent (SWE) simulations over the western United States (WUS) from the Noah‐MP LSM, a key land component in widely used research and operational modeling systems. Noah‐MP driven by different atmospheric forcing data sets generally underestimates SWE relative to SNOw TELemetry observations, with biases partly explained by scale mismatches between point‐based measurements and model pixels. Despite systematic underestimation, Noah‐MP captures observed interannual variability of peak and mean SWE anomalies very well ( r = 0.99) and shows lower but still significant accuracy in simulating long‐term regional SWE trends and the spatial patterns of SWE trends ( r = 0.60). Comparisons with gridded reference data sets confirm Noah‐MP's high skill in simulating the regional daily timing ( r > 0.99), interannual variability, and pixel‐scale daily SWE ( r = 0.71–0.81). However, the simulations underestimate SWE by 9%–16%, with peak SWE occurring ∼4 days earlier and snow disappearing ∼35 days earlier than observed, reflecting overly rapid ablation across both cold and warm seasons. Spatial clustering analyses reveal regional heterogeneity in SWE bias characteristics and sensitivities to LSM parameterizations and meteorological forcing uncertainties. The presence of regional overestimation suggests that applying uniform model adjustments may degrade performance in certain areas. An updated combination of Noah‐MP physics options shows accuracy improvements, reducing both accumulation and ablation errors.
- Open Access
- 11 July 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 130 (14)
Assessing the Intensity of Heatwaves in a Warming Climate at the Urban Scale: A Case Study of the Metropolitan Area of Barcelona
Given that more than half of the world's population currently resides in cities, further understanding of the potential impact of future climate change on urban areas is needed. In this regard, we project recent heatwave (HW) episodes in the Metropolitan Area of Barcelona (AMB) with future climate conditions until 2100 using the pseudo global warming method. First, we determine all the HWs that occurred in the AMB during the last climatological period of 30 years (1991–2020) and simulate each individual event using the Weather and Research Forecasting (WRF) model at high‐resolution. Then, these historical HW events are resimulated with the modified atmospheric conditions of the midcentury (2041–2070) and the end of the century (2071–2100) according to the scenario SSP3‐7.0, in which CO 2 emissions are projected to almost double from current levels by 2100 following a low emission reduction scenario. In the AMB, HW intensity is expected to increase by 2.5°C and 4.2°C in the mid‐ and end‐of‐the‐century periods, respectively. Higher temperatures are related to the stationary and stable synoptic pattern, which, among the four analyzed, is projected to experience the greatest intensification in the future. The geopotential height at 500 hPa could increase up to 100 geopotential meters (gpm) by the end of the century, leading to values up to 6,050 gpm, which indicates changes in thermodynamic and dynamic effects resulting in potentially warmer HW episodes. The results obtained can aid in understanding the expected changes for this century, which could facilitate the formulation of heat mitigation and adaptation strategies, particularly for the most exposed areas.
- 11 July 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 130 (14)
Open AccessAssessing the Intensity of Heatwaves in a Warming Climate at the Urban Scale: A Case Study of the Metropolitan Area of Barcelona
Given that more than half of the world's population currently resides in cities, further understanding of the potential impact of future climate change on urban areas is needed. In this regard, we project recent heatwave (HW) episodes in the Metropolitan Area of Barcelona (AMB) with future climate conditions until 2100 using the pseudo global warming method. First, we determine all the HWs that occurred in the AMB during the last climatological period of 30 years (1991–2020) and simulate each individual event using the Weather and Research Forecasting (WRF) model at high‐resolution. Then, these historical HW events are resimulated with the modified atmospheric conditions of the midcentury (2041–2070) and the end of the century (2071–2100) according to the scenario SSP3‐7.0, in which CO 2 emissions are projected to almost double from current levels by 2100 following a low emission reduction scenario. In the AMB, HW intensity is expected to increase by 2.5°C and 4.2°C in the mid‐ and end‐of‐the‐century periods, respectively. Higher temperatures are related to the stationary and stable synoptic pattern, which, among the four analyzed, is projected to experience the greatest intensification in the future. The geopotential height at 500 hPa could increase up to 100 geopotential meters (gpm) by the end of the century, leading to values up to 6,050 gpm, which indicates changes in thermodynamic and dynamic effects resulting in potentially warmer HW episodes. The results obtained can aid in understanding the expected changes for this century, which could facilitate the formulation of heat mitigation and adaptation strategies, particularly for the most exposed areas.
- Open Access
- 8 February 2025
- Published by Wiley
Assessing the intensity of heatwaves in a warming climate at the urban scale: A case study of the Metropolitan Area of Barcelona
Given that more than half of the world’s population currently resides in cities, further understanding of the potential impact of future climate change on urban areas is needed. In this regard, we project recent heatwave (HW) episodes in the Metropolitan Area of Barcelona (AMB) with future climate conditions until 2100 using the pseudo global warming (PGW) method. First, we determine all the HWs that occurred in the AMB during the last climatological period of 30 years (1991-2020) and simulate each individual event using the Weather and Research Forecasting (WRF) model at high-resolution. Then, these historical HW events are re-simulated with the modified atmospheric conditions of the mid-century (2041-2070) and the end-of-the-century (2071-2100) according to the scenario SSP3-7.0, in which CO2 emissions are projected to almost double from current levels by 2100 following a low emission reduction scenario. HW intensity is expected to increase by 2.5 °C and 4.2 °C in the mid- and end-of-the-century periods, respectively. Higher temperatures are related to stationary and stable synoptic patterns, which are projected to experience the greatest intensification in the future. The geopotential height at 500 hPa could increase up to 100 geopotential meters (gpm) by the end of the century, leading to values up to 6050 gpm, which indicates changes in thermodynamic and dynamic effects resulting in potentially warmer HW episodes. The results obtained can aid in understanding the expected changes for this century, which could facilitate the formulation of heat mitigation and adaptation strategies, particularly for the most exposed areas.
- 8 February 2025
- Published by Wiley
Open AccessAssessing the intensity of heatwaves in a warming climate at the urban scale: A case study of the Metropolitan Area of Barcelona
Given that more than half of the world’s population currently resides in cities, further understanding of the potential impact of future climate change on urban areas is needed. In this regard, we project recent heatwave (HW) episodes in the Metropolitan Area of Barcelona (AMB) with future climate conditions until 2100 using the pseudo global warming (PGW) method. First, we determine all the HWs that occurred in the AMB during the last climatological period of 30 years (1991-2020) and simulate each individual event using the Weather and Research Forecasting (WRF) model at high-resolution. Then, these historical HW events are re-simulated with the modified atmospheric conditions of the mid-century (2041-2070) and the end-of-the-century (2071-2100) according to the scenario SSP3-7.0, in which CO2 emissions are projected to almost double from current levels by 2100 following a low emission reduction scenario. HW intensity is expected to increase by 2.5 °C and 4.2 °C in the mid- and end-of-the-century periods, respectively. Higher temperatures are related to stationary and stable synoptic patterns, which are projected to experience the greatest intensification in the future. The geopotential height at 500 hPa could increase up to 100 geopotential meters (gpm) by the end of the century, leading to values up to 6050 gpm, which indicates changes in thermodynamic and dynamic effects resulting in potentially warmer HW episodes. The results obtained can aid in understanding the expected changes for this century, which could facilitate the formulation of heat mitigation and adaptation strategies, particularly for the most exposed areas.
- Open Access
- 1 November 2024
- Published by Wiley
Assessing the intensity of heatwaves in a warming climate at the urban scale: A case study of the Metropolitan Area of Barcelona
Given that more than half of the world’s population currently resides in cities, further understanding of the potential impact of future climate change on urban areas is needed. In this regard, we project recent heatwave (HW) episodes in the Metropolitan Area of Barcelona (AMB) with future climate conditions until 2100 using the pseudo global warming (PGW) method. First, we determine all the HWs that occurred in the AMB during the last climatological period of 30 years (1991-2020) and simulate each individual event using the Weather and Research Forecasting (WRF) model at high-resolution. Then, these historical HW events are re-simulated with the modified atmospheric conditions of the mid-century (2041-2070) and the end-of-the-century (2071-2100) according to the scenario SSP370, in which CO2 emissions are projected to almost double from current levels by 2100 following a low emission reduction scenario. HW intensity is expected to increase by 2.5 °C and 4.2 °C in the mid- and end-of-the-century periods, respectively. Higher temperatures are related to stationary and stable synoptic patterns, which are projected to experience the greatest intensification in the future. The geopotential height at 500 hPa could increase up to 100 geopotential meters (gpm) by the end of the century, leading to values up to 6050 gpm, which indicates changes in thermodynamic and dynamic effects resulting in potentially warmer HW episodes. The results obtained can aid in understanding the expected changes for this century, which could facilitate the formulation of heat mitigation and adaptation strategies, particularly for the most exposed areas.
- 1 November 2024
- Published by Wiley
Open AccessAssessing the intensity of heatwaves in a warming climate at the urban scale: A case study of the Metropolitan Area of Barcelona
Given that more than half of the world’s population currently resides in cities, further understanding of the potential impact of future climate change on urban areas is needed. In this regard, we project recent heatwave (HW) episodes in the Metropolitan Area of Barcelona (AMB) with future climate conditions until 2100 using the pseudo global warming (PGW) method. First, we determine all the HWs that occurred in the AMB during the last climatological period of 30 years (1991-2020) and simulate each individual event using the Weather and Research Forecasting (WRF) model at high-resolution. Then, these historical HW events are re-simulated with the modified atmospheric conditions of the mid-century (2041-2070) and the end-of-the-century (2071-2100) according to the scenario SSP370, in which CO2 emissions are projected to almost double from current levels by 2100 following a low emission reduction scenario. HW intensity is expected to increase by 2.5 °C and 4.2 °C in the mid- and end-of-the-century periods, respectively. Higher temperatures are related to stationary and stable synoptic patterns, which are projected to experience the greatest intensification in the future. The geopotential height at 500 hPa could increase up to 100 geopotential meters (gpm) by the end of the century, leading to values up to 6050 gpm, which indicates changes in thermodynamic and dynamic effects resulting in potentially warmer HW episodes. The results obtained can aid in understanding the expected changes for this century, which could facilitate the formulation of heat mitigation and adaptation strategies, particularly for the most exposed areas.
- 7 September 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (17)
Characteristics of Precipitation and Mesoscale Convective Systems Over the Peruvian Central Andes in Multi 5‐Year Convection‐Permitting Simulations
Using the Weather Research and Forecasting model with two planetary boundary layer schemes, ACM2 and MYNN, convection‐permitting model (CPM) regional climate simulations were conducted for a 6‐year period, including a one‐year spin‐up period, at a 15‐km grid spacing covering entire South America and a nested convection‐permitting 3‐km grid spacing covering the Peruvian central Andes region. These two CPM simulations along with a 4‐km simulation covering South America produced by National Center for Atmospheric Research (NCAR), three gridded precipitation products, and rain gauge data in Peru and Brazil, are used to document the characteristics of precipitation and mesoscale convective systems (MCSs) in the Peruvian central Andes region. Results show that all km‐scale simulations generally capture the spatiotemporal patterns of precipitation and MCSs at both seasonal and diurnal scales, although biases exist in aspects such as precipitation intensity and MCS frequency, size, propagation speed, and associated precipitation intensity. The 3‐km simulation using MYNN scheme generally outperforms the other simulations in capturing seasonal and diurnal precipitation over the mountain, while both it and the 4‐km simulation demonstrate superior performance in the western Amazon Basin, based on the comparison to the gridded precipitation products and gauge data. Dynamic factors, primarily low‐level jet and terrain‐induced uplift, are the key drivers for precipitation and MCS genesis along the east slope of the Andes, while thermodynamic factors control the precipitation and MCS activity in the western Amazon Basin and over elevated mountainous regions. The study suggests model improvements and better model configurations for future regional climate projections.
- 7 September 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (17)
Characteristics of Precipitation and Mesoscale Convective Systems Over the Peruvian Central Andes in Multi 5‐Year Convection‐Permitting Simulations
Using the Weather Research and Forecasting model with two planetary boundary layer schemes, ACM2 and MYNN, convection‐permitting model (CPM) regional climate simulations were conducted for a 6‐year period, including a one‐year spin‐up period, at a 15‐km grid spacing covering entire South America and a nested convection‐permitting 3‐km grid spacing covering the Peruvian central Andes region. These two CPM simulations along with a 4‐km simulation covering South America produced by National Center for Atmospheric Research (NCAR), three gridded precipitation products, and rain gauge data in Peru and Brazil, are used to document the characteristics of precipitation and mesoscale convective systems (MCSs) in the Peruvian central Andes region. Results show that all km‐scale simulations generally capture the spatiotemporal patterns of precipitation and MCSs at both seasonal and diurnal scales, although biases exist in aspects such as precipitation intensity and MCS frequency, size, propagation speed, and associated precipitation intensity. The 3‐km simulation using MYNN scheme generally outperforms the other simulations in capturing seasonal and diurnal precipitation over the mountain, while both it and the 4‐km simulation demonstrate superior performance in the western Amazon Basin, based on the comparison to the gridded precipitation products and gauge data. Dynamic factors, primarily low‐level jet and terrain‐induced uplift, are the key drivers for precipitation and MCS genesis along the east slope of the Andes, while thermodynamic factors control the precipitation and MCS activity in the western Amazon Basin and over elevated mountainous regions. The study suggests model improvements and better model configurations for future regional climate projections.
- Top Cited PapersOpen Access
- 16 April 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (8)
Km‐Scale Simulations of Mesoscale Convective Systems Over South America—A Feature Tracker Intercomparison
Mesoscale convective systems (MCSs) are clusters of thunderstorms that are important in Earth's water and energy cycle. Additionally, they are responsible for extreme events such as large hail, strong winds, and extreme precipitation. Automated object‐based analyses that track MCSs have become popular since they allow us to identify and follow MCSs over their entire life cycle in a Lagrangian framework. This rise in popularity was accompanied by an increasing number of MCS tracking algorithms, however, little is known about how sensitive analyses are concerning the MCS tracker formulation. Here, we assess differences between six MCS tracking algorithms on South American MCS characteristics and evaluate MCSs in kilometer‐scale simulations with observational‐based MCSs over 3 years. All trackers are run with a common set of MCS classification criteria to isolate tracker formulation differences. The tracker formulation substantially impacts MCS characteristics such as frequency, size, duration, and contribution to total precipitation. The evaluation of simulated MCS characteristics is less sensitive to the tracker formulation and all trackers agree that the model can capture MCS characteristics well across different South American climate zones. Dominant sources of uncertainty are the segmentation of cloud systems in space and time and the treatment of how MCSs are linked in time. Our results highlight that comparing MCS analyses that use different tracking algorithms is challenging. We provide general guidelines on how MCS characteristics compare between trackers to facilitate a more robust assessment of MCS statistics in future studies.
- 16 April 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (8)
Top Cited PapersOpen AccessKm‐Scale Simulations of Mesoscale Convective Systems Over South America—A Feature Tracker Intercomparison
Mesoscale convective systems (MCSs) are clusters of thunderstorms that are important in Earth's water and energy cycle. Additionally, they are responsible for extreme events such as large hail, strong winds, and extreme precipitation. Automated object‐based analyses that track MCSs have become popular since they allow us to identify and follow MCSs over their entire life cycle in a Lagrangian framework. This rise in popularity was accompanied by an increasing number of MCS tracking algorithms, however, little is known about how sensitive analyses are concerning the MCS tracker formulation. Here, we assess differences between six MCS tracking algorithms on South American MCS characteristics and evaluate MCSs in kilometer‐scale simulations with observational‐based MCSs over 3 years. All trackers are run with a common set of MCS classification criteria to isolate tracker formulation differences. The tracker formulation substantially impacts MCS characteristics such as frequency, size, duration, and contribution to total precipitation. The evaluation of simulated MCS characteristics is less sensitive to the tracker formulation and all trackers agree that the model can capture MCS characteristics well across different South American climate zones. Dominant sources of uncertainty are the segmentation of cloud systems in space and time and the treatment of how MCSs are linked in time. Our results highlight that comparing MCS analyses that use different tracking algorithms is challenging. We provide general guidelines on how MCS characteristics compare between trackers to facilitate a more robust assessment of MCS statistics in future studies.
- Open Access
- 14 November 2023
- Published by Wiley
Characteristics of Precipitation and Mesoscale Convective Systems over the Peruvian Central Andes in Multi 5-Year Convection-Permitting Simulations
Using the Weather Research and Forecasting (WRF) model with two planetary boundary layer schemes, ACM2 and MYNN, convection-permitting model (CPM) regional climate simulations were conducted for a 6-year period at a 15-km grid spacing covering entire South America and a nested convection-permitting 3-km grid spacing covering the Peruvian central Andes region. These two CPM simulations along with a 4-km simulation covering South America produced by National Center for Atmospheric Research, three gridded global precipitation datasets, and rain gauge data in Peru and Brazil, are used to document the characteristics of precipitation and MCSs in the Peruvian central Andes region. Results show that all km-scale simulations generally capture the spatiotemporal patterns of precipitation and MCSs at both seasonal and diurnal scales, although biases exist in aspects such as precipitation intensity and MCS frequency, size, propagation speed, and associated precipitation intensity. The 3-km simulation using MYNN scheme generally outperforms the other simulations in capturing seasonal and diurnal precipitation over the mountain, while both it and the 4-km simulation demonstrate superior performance in the western Amazon Basin, based on the comparison to the gridded precipitation products and gauge data. Dynamic factors, primarily low-level jet and terrain-induced uplift, are the key drivers for precipitation and MCS genesis along the east slope of the Andes, while thermodynamic factors control the precipitation and MCS activity in the western Amazon Basin and over elevated mountainous regions. The study suggests aspects of the model needing improvement and the choice of better model configurations for future regional climate projections.
- 14 November 2023
- Published by Wiley
Open AccessCharacteristics of Precipitation and Mesoscale Convective Systems over the Peruvian Central Andes in Multi 5-Year Convection-Permitting Simulations
Using the Weather Research and Forecasting (WRF) model with two planetary boundary layer schemes, ACM2 and MYNN, convection-permitting model (CPM) regional climate simulations were conducted for a 6-year period at a 15-km grid spacing covering entire South America and a nested convection-permitting 3-km grid spacing covering the Peruvian central Andes region. These two CPM simulations along with a 4-km simulation covering South America produced by National Center for Atmospheric Research, three gridded global precipitation datasets, and rain gauge data in Peru and Brazil, are used to document the characteristics of precipitation and MCSs in the Peruvian central Andes region. Results show that all km-scale simulations generally capture the spatiotemporal patterns of precipitation and MCSs at both seasonal and diurnal scales, although biases exist in aspects such as precipitation intensity and MCS frequency, size, propagation speed, and associated precipitation intensity. The 3-km simulation using MYNN scheme generally outperforms the other simulations in capturing seasonal and diurnal precipitation over the mountain, while both it and the 4-km simulation demonstrate superior performance in the western Amazon Basin, based on the comparison to the gridded precipitation products and gauge data. Dynamic factors, primarily low-level jet and terrain-induced uplift, are the key drivers for precipitation and MCS genesis along the east slope of the Andes, while thermodynamic factors control the precipitation and MCS activity in the western Amazon Basin and over elevated mountainous regions. The study suggests aspects of the model needing improvement and the choice of better model configurations for future regional climate projections.
- Open Access
- 27 October 2023
- Published by Wiley
Km-Scale Simulations of Mesoscale Convective Systems (MCSs) Over South America - A Feature Tracker Intercomparison
Mesoscale convective systems (MCSs) are clusters of thunderstorms that are important in Earth’s water and energy cycle. Additionally, they are responsible for extreme events such as large hail, strong winds, and extreme precipitation. Automated object-based analyses that track MCSs have become popular since they allow us to identify and follow MCSs over their entire life cycle in a Lagrangian framework. This rise in popularity was accompanied by an increasing number of MCS tracking algorithms, however, little is known about how sensitive analyses are concerning the MCS tracker formulation. Here, we assess differences between six MCS tracking algorithms on South American MCS characteristics and evaluating MCSs in kilometer-scale simulations with observational-based MCSs over three years. All trackers are run with a common set of MCS classification criteria to isolate tracker formulation differences. The tracker formulation substantially impacts MCS characteristics such as frequency, size, duration, and contribution to total precipitation. The evaluation of simulated MCS characteristics is less sensitive to the tracker formulation and all trackers agree that the model can capture MCS characteristics well across different South American climate zones. Dominant sources of uncertainty are the segmentation of cloud systems and the treatment of splitting and merging of storms in MCS trackers. Our results highlight that comparing MCS analyses that use different tracking algorithms is challenging. We provide general guidelines on how MCS characteristics compare between trackers to facilitate a more robust assessment of MCS statistics in future studies.
- 27 October 2023
- Published by Wiley
Open AccessKm-Scale Simulations of Mesoscale Convective Systems (MCSs) Over South America - A Feature Tracker Intercomparison
Mesoscale convective systems (MCSs) are clusters of thunderstorms that are important in Earth’s water and energy cycle. Additionally, they are responsible for extreme events such as large hail, strong winds, and extreme precipitation. Automated object-based analyses that track MCSs have become popular since they allow us to identify and follow MCSs over their entire life cycle in a Lagrangian framework. This rise in popularity was accompanied by an increasing number of MCS tracking algorithms, however, little is known about how sensitive analyses are concerning the MCS tracker formulation. Here, we assess differences between six MCS tracking algorithms on South American MCS characteristics and evaluating MCSs in kilometer-scale simulations with observational-based MCSs over three years. All trackers are run with a common set of MCS classification criteria to isolate tracker formulation differences. The tracker formulation substantially impacts MCS characteristics such as frequency, size, duration, and contribution to total precipitation. The evaluation of simulated MCS characteristics is less sensitive to the tracker formulation and all trackers agree that the model can capture MCS characteristics well across different South American climate zones. Dominant sources of uncertainty are the segmentation of cloud systems and the treatment of splitting and merging of storms in MCS trackers. Our results highlight that comparing MCS analyses that use different tracking algorithms is challenging. We provide general guidelines on how MCS characteristics compare between trackers to facilitate a more robust assessment of MCS statistics in future studies.
- Open Access
- 16 March 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (3)
High Resolution Forecasting of Summer Drought in the Western United States
Drought monitoring and forecasting systems are used in the United States (U.S.) to inform drought management decisions. Drought forecasting efforts have often been conducted and evaluated at coarse spatial resolutions (i.e., >10‐km), which miss key local drought information at higher resolutions. Addressing the importance of forecasting drought at high resolutions, this study develops statistical models to evaluate 1‐ to 3‐month lead time predictability of meteorological and agricultural summer drought across the western U.S. at a 4‐km resolution. Our high‐resolution drought predictions have statistically significant skill ( p ≤ 0.05) across 70%–100% of the western U.S., varying by evaluation metric and lead time. 1‐ to 3‐month lead time drought forecasts accurately represent monitored summer drought spatial patterns during major drought events, the interannual variability of drought area from 1982 to 2020 ( r = 0.84–0.93), and drought trends ( r = 0.94–0.97). 71% of western U.S summer drought area interannual variability can be explained by cold‐season (November–February) climate conditions alone allowing skillful 3‐month lead time predictions. Pre‐summer drought conditions (represented by drought indices) are the most important predictors for summer drought. Thus, the statistical models developed in this study heavily rely on the autocorrelation of chosen agricultural and meteorological drought indices which estimate land surface moisture memory. Indeed, prediction skill strongly correlates with persistence of drought conditions ( r ≥ 0.73). This study is intended to support future development of operational drought early warning systems that inform drought management.
- 16 March 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (3)
Open AccessHigh Resolution Forecasting of Summer Drought in the Western United States
Drought monitoring and forecasting systems are used in the United States (U.S.) to inform drought management decisions. Drought forecasting efforts have often been conducted and evaluated at coarse spatial resolutions (i.e., >10‐km), which miss key local drought information at higher resolutions. Addressing the importance of forecasting drought at high resolutions, this study develops statistical models to evaluate 1‐ to 3‐month lead time predictability of meteorological and agricultural summer drought across the western U.S. at a 4‐km resolution. Our high‐resolution drought predictions have statistically significant skill ( p ≤ 0.05) across 70%–100% of the western U.S., varying by evaluation metric and lead time. 1‐ to 3‐month lead time drought forecasts accurately represent monitored summer drought spatial patterns during major drought events, the interannual variability of drought area from 1982 to 2020 ( r = 0.84–0.93), and drought trends ( r = 0.94–0.97). 71% of western U.S summer drought area interannual variability can be explained by cold‐season (November–February) climate conditions alone allowing skillful 3‐month lead time predictions. Pre‐summer drought conditions (represented by drought indices) are the most important predictors for summer drought. Thus, the statistical models developed in this study heavily rely on the autocorrelation of chosen agricultural and meteorological drought indices which estimate land surface moisture memory. Indeed, prediction skill strongly correlates with persistence of drought conditions ( r ≥ 0.73). This study is intended to support future development of operational drought early warning systems that inform drought management.
- Open Access
- 18 November 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 126 (22)
What Causes the Unobserved Early‐Spring Snowpack Ablation in Convection‐Permitting WRF Modeling Over Utah Mountains?
Accurate prediction of snowpack evolution and ablation is critical to supporting weather and hydrological applications. Convection‐permitting modeling has been shown to well capture observed snowpack evolution over many western United States (U.S.) mountain ranges, but some significant ablation biases still remain. In this study, we conduct process‐level snowpack analyses of a widely used convection‐permitting (4‐km) weather research and forecasting (WRF) modeling product (WRF4km) for the contiguous U.S. to understand the mechanisms causing its unobserved early‐spring snow ablation over Utah mountains. Analyses across Utah Snowpack Telemetry (SNOTEL) sites show that the unobserved snowpack ablation during mid‐February to late‐March in WRF4km is driven by multiple strong melting events. The melting results from the enhanced downward sensible heat flux to snowpack and enhanced ground solar radiation absorption, with generally larger contributions from the former before early March and from the latter after early March. The enhanced downward sensible heat flux to snowpack is mainly due to the enhanced surface heat exchange coefficient induced by high surface wind speeds. The enhanced ground solar radiation absorption is driven by both enhanced surface downward solar radiation and strong melting‐induced snow cover reduction that is caused by deficiencies in Noah‐MP snow‐related parameterizations used in WRF4km. The substantial snow cover reduction during melting decreases surface albedo and hence triggers a positive albedo feedback that further accelerates melting. Our analyses reveal possible deficiencies in WRF and Noah‐MP (e.g., canopy processes and snow albedo) and shed light on future directions for model improvements.
- 18 November 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 126 (22)
Open AccessWhat Causes the Unobserved Early‐Spring Snowpack Ablation in Convection‐Permitting WRF Modeling Over Utah Mountains?
Accurate prediction of snowpack evolution and ablation is critical to supporting weather and hydrological applications. Convection‐permitting modeling has been shown to well capture observed snowpack evolution over many western United States (U.S.) mountain ranges, but some significant ablation biases still remain. In this study, we conduct process‐level snowpack analyses of a widely used convection‐permitting (4‐km) weather research and forecasting (WRF) modeling product (WRF4km) for the contiguous U.S. to understand the mechanisms causing its unobserved early‐spring snow ablation over Utah mountains. Analyses across Utah Snowpack Telemetry (SNOTEL) sites show that the unobserved snowpack ablation during mid‐February to late‐March in WRF4km is driven by multiple strong melting events. The melting results from the enhanced downward sensible heat flux to snowpack and enhanced ground solar radiation absorption, with generally larger contributions from the former before early March and from the latter after early March. The enhanced downward sensible heat flux to snowpack is mainly due to the enhanced surface heat exchange coefficient induced by high surface wind speeds. The enhanced ground solar radiation absorption is driven by both enhanced surface downward solar radiation and strong melting‐induced snow cover reduction that is caused by deficiencies in Noah‐MP snow‐related parameterizations used in WRF4km. The substantial snow cover reduction during melting decreases surface albedo and hence triggers a positive albedo feedback that further accelerates melting. Our analyses reveal possible deficiencies in WRF and Noah‐MP (e.g., canopy processes and snow albedo) and shed light on future directions for model improvements.