Marco Pisani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marco Pisani has a total of 116 co-authors. Here are the top co-authors by number of shared publications:
- Massimo Zucco
Istituto Nazionale di Ricerca Metrologica, Strada delle Cacce, 91, 10135 Torino, Italy
16 shared publications - Milena Astrua
Istituto Nazionale di Ricerca Metrologica, INRiM, 10135 Torino, Italy
7 shared publications Milena Astrua
INRiM, Istituto Nazionale di Ricerca Metrologica, 10135 Torino, Italy
4 shared publications- Andrea Egidi
Istituto Nazionale di Ricerca Metrologica (INRIM), 10135 Torino, Italy
3 shared publications - Alessandro Balsamo
INRIM Natl Inst Res Metrol, Turin, Italy
2 shared publications - Carlo Paolo Sasso
Istituto Nazionale di Ricerca Metrologica, Strada delle Cacce, 91, 10135 Torino, Italy
2 shared publications
Latest Publications
- Open Access
A Six-Quadrupole Diamagnetic Suspension Architecture for Ultra-Sensitive Space Accelerometry
This paper proposes a novel inertial sensor based on a solid diamagnetic cubic test mass passively suspended by a symmetric configuration of six magnetic quadrupoles. Designed specifically for microgravity environments, this system eliminates the mechanical noise and hysteresis inherent in elastic suspensions, as well as the complexity associated with electrostatic suspension systems. We provide an analysis of the magnetic intrinsic noise floor imposed by eddy current damping, alongside ground-based preliminary experimental results demonstrating potential sensitivities in the order of the regime.Open AccessA Six-Quadrupole Diamagnetic Suspension Architecture for Ultra-Sensitive Space Accelerometry
This paper proposes a novel inertial sensor based on a solid diamagnetic cubic test mass passively suspended by a symmetric configuration of six magnetic quadrupoles. Designed specifically for microgravity environments, this system eliminates the mechanical noise and hysteresis inherent in elastic suspensions, as well as the complexity associated with electrostatic suspension systems. We provide an analysis of the magnetic intrinsic noise floor imposed by eddy current damping, alongside ground-based preliminary experimental results demonstrating potential sensitivities in the order of the regime. - Open Access
- 7 September 2026
- Published by MDPI AG in Preprints.org
A Six-Quadrupole Diamagnetic Suspension Architecture for Ultra-Sensitive Space Accelerometry
This paper proposes a novel inertial sensor based on a solid diamagnetic cubic test mass passively suspended by a symmetric configuration of six magnetic quadrupoles. Designed specifically for microgravity environments, this system eliminates the mechanical noise and hysteresis inherent in elastic suspensions, as well as the complexity associated with electrostatic suspension systems. We provide an analysis of the magnetic intrinsic noise floor imposed by eddy current damping, alongside ground-based preliminary experimental results demonstrating potential sensitivities in the order of the $10^{-10} \text{ m/s}^2/\sqrt{\text{Hz}}$ regime.- 7 September 2026
- Published by MDPI AG in Preprints.org
Open AccessA Six-Quadrupole Diamagnetic Suspension Architecture for Ultra-Sensitive Space Accelerometry
This paper proposes a novel inertial sensor based on a solid diamagnetic cubic test mass passively suspended by a symmetric configuration of six magnetic quadrupoles. Designed specifically for microgravity environments, this system eliminates the mechanical noise and hysteresis inherent in elastic suspensions, as well as the complexity associated with electrostatic suspension systems. We provide an analysis of the magnetic intrinsic noise floor imposed by eddy current damping, alongside ground-based preliminary experimental results demonstrating potential sensitivities in the order of the $10^{-10} \text{ m/s}^2/\sqrt{\text{Hz}}$ regime. - Open Access
- 1 December 2025
- Published by AIP Publishing in Journal of Physical and Chemical Reference Data
- Vol. 54 (4)
Speed of sound in humid air: Accurate thermodynamic model and experimental validation
We present a thermodynamic model of speed of sound w in humid air as a function of the parameters of influence, namely temperature T, pressure p, relative humidity hr, carbon dioxide concentration xCO2, and acoustic frequency f. The validity of the model extends between 200 K and 647 K, for pressures up to 10 MPa. By implementing the most accurate thermodynamic information currently available for dry air, water vapor, and their interaction, including heat capacities, virial coefficients, and relaxation parameters, the model revises and updates the most complete previous correlation [A. J. Zuckerwar, Handbook of the Speed of Sound in Real Gases – Volume III Speed of Sound in Air (Academic Press, London, 2002)], reducing its relative standard uncertainty by more than one order of magnitude, down to 25 ppm at ordinary, near-ambient conditions. The software implementation of the model is made available by publication of source and executable files. To test the validity of the model and its practical application, we have measured the speed of sound in humid air near ambient pressure using an acoustic wavelength meter set up in a hemi-anechoic chamber and compared a subset of these experimental determinations with those obtained by flowing air, sampled from the same environment, through a spherical resonator. The results from both experiments were found consistent with the model within their combined uncertainties. The positive outcome of the comparison suggests that acoustic thermometry in humid air may be realized at the level of 0.015 K with perspectives for application to dimensional measurements, temperature and acoustic metrology, and atmospheric physics.
- 1 December 2025
- Published by AIP Publishing in Journal of Physical and Chemical Reference Data
- Vol. 54 (4)
Open AccessSpeed of sound in humid air: Accurate thermodynamic model and experimental validation
We present a thermodynamic model of speed of sound w in humid air as a function of the parameters of influence, namely temperature T, pressure p, relative humidity hr, carbon dioxide concentration xCO2, and acoustic frequency f. The validity of the model extends between 200 K and 647 K, for pressures up to 10 MPa. By implementing the most accurate thermodynamic information currently available for dry air, water vapor, and their interaction, including heat capacities, virial coefficients, and relaxation parameters, the model revises and updates the most complete previous correlation [A. J. Zuckerwar, Handbook of the Speed of Sound in Real Gases – Volume III Speed of Sound in Air (Academic Press, London, 2002)], reducing its relative standard uncertainty by more than one order of magnitude, down to 25 ppm at ordinary, near-ambient conditions. The software implementation of the model is made available by publication of source and executable files. To test the validity of the model and its practical application, we have measured the speed of sound in humid air near ambient pressure using an acoustic wavelength meter set up in a hemi-anechoic chamber and compared a subset of these experimental determinations with those obtained by flowing air, sampled from the same environment, through a spherical resonator. The results from both experiments were found consistent with the model within their combined uncertainties. The positive outcome of the comparison suggests that acoustic thermometry in humid air may be realized at the level of 0.015 K with perspectives for application to dimensional measurements, temperature and acoustic metrology, and atmospheric physics.
- Open Access
- 9 September 2024
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 139 (9) , 1-16
A quantitative approach to reflectance transformation imaging in profilometric applications
Reflectance transformation imaging (RTI) is a technique employed to assess both the intensity and directional properties of light reflected from an object, aiming to visualize an object under different incident light directions. This technique has quickly become a commonly used approach for the documentation, acquisition and deciphering for cultural heritage objects, because it enables to enhance and highlight image details. The output of this mathematical synthesis technique, which elaborates illumination information, is contained in a pseudocolour image called normal map. Starting from this image, this technique allows to obtain the reconstruction of the outline of semi-flat objects by integrating the normal map given by the RTI, i.e. normal integration. The technique of normal integration has been known for many years, being widely used in graphical modelling across various fields of 3D imaging. In the context of cultural heritage, this particular form of 3D modelling has already found application in the reconstruction of semi-flat objects, albeit with some limitations in the accurate portraying of low spatial frequencies. However, quantitative and systematic studies on the efficiency of 3D rendering of objects using RTI and normal integration have not yet been conducted. In the context of this research, the quantitative evaluation of the accuracy of the RTI technique with normal integration for profilometric applications on semi-flat objects is proposed and a study on its fidelity in reproducing the considered artefact is conducted. For this purpose, ad hoc profilometric targets were designed, realized and analysed to quantitatively compare the results of RTI and normal integration with different standardized techniques: micro-photogrammetry, laser scanning and optical profilometry. Graphical abstract
- 9 September 2024
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 139 (9) , 1-16
Open AccessA quantitative approach to reflectance transformation imaging in profilometric applications
Reflectance transformation imaging (RTI) is a technique employed to assess both the intensity and directional properties of light reflected from an object, aiming to visualize an object under different incident light directions. This technique has quickly become a commonly used approach for the documentation, acquisition and deciphering for cultural heritage objects, because it enables to enhance and highlight image details. The output of this mathematical synthesis technique, which elaborates illumination information, is contained in a pseudocolour image called normal map. Starting from this image, this technique allows to obtain the reconstruction of the outline of semi-flat objects by integrating the normal map given by the RTI, i.e. normal integration. The technique of normal integration has been known for many years, being widely used in graphical modelling across various fields of 3D imaging. In the context of cultural heritage, this particular form of 3D modelling has already found application in the reconstruction of semi-flat objects, albeit with some limitations in the accurate portraying of low spatial frequencies. However, quantitative and systematic studies on the efficiency of 3D rendering of objects using RTI and normal integration have not yet been conducted. In the context of this research, the quantitative evaluation of the accuracy of the RTI technique with normal integration for profilometric applications on semi-flat objects is proposed and a study on its fidelity in reproducing the considered artefact is conducted. For this purpose, ad hoc profilometric targets were designed, realized and analysed to quantitatively compare the results of RTI and normal integration with different standardized techniques: micro-photogrammetry, laser scanning and optical profilometry. Graphical abstract
- Open Access
Investigation on Modulation-Based Straightness Measurement
The concept of a novel non-contacting technique for measuring straightness and its practical realization in a mechanical device are presented in this article. The device, called InPlanT, is based on the acquisition of the luminous signal retroreflected by a spherical glass target and impinged on a photodiode after mechanical modulation. The received signal is reduced to the sought straightness profile using dedicated software. The system was characterized with a high-accuracy CMM and the maximum error of indication was derived.
Open AccessInvestigation on Modulation-Based Straightness Measurement
The concept of a novel non-contacting technique for measuring straightness and its practical realization in a mechanical device are presented in this article. The device, called InPlanT, is based on the acquisition of the luminous signal retroreflected by a spherical glass target and impinged on a photodiode after mechanical modulation. The received signal is reduced to the sought straightness profile using dedicated software. The system was characterized with a high-accuracy CMM and the maximum error of indication was derived.
- Open Access
- 20 February 2023
- Published by Springer Nature in Applied Geomatics
- Vol. 15 (2) , 371-381
The European GeoMetre project: developing enhanced large-scale dimensional metrology for geodesy
: We provide a survey on the joint European research project “GeoMetre”, which explores novel technologies and their inclusion to existing surveying strategies to improve the traceability of geodetic reference frames to the SI definition of the metre. This work includes the development of novel distance meters with a range of up to 5 km, the realisation of optical multilateration systems for large structure monitoring at an operation distance of 50 m and beyond, and a novel strategy for GNSS-based distance determination. Different methods for refractivity compensation, based on classical sensors, on dispersion, on spectroscopic thermometry, and on the speed of sound to reduce the meteorological uncertainties in precise distance measurements, are developed further and characterised. These systems are validated at and applied to the novel European standard baseline EURO5000 at the Pieniny Kippen Belt, Poland, which was completely refurbished and intensely studied in this project. We use our novel instruments for a reduced uncertainty of the scale in the surveillance networks solutions for local tie measurements at space-geodetic co-location stations. We also investigate novel approaches like close-range photogrammetry to reference point determination of space-geodetic telescopes. Finally, we also investigate the inclusion of the local gravity field to consider the deviations of the vertical in the data analysis and to reduce the uncertainty of coordinate transformations in this complex problem.
- 20 February 2023
- Published by Springer Nature in Applied Geomatics
- Vol. 15 (2) , 371-381
Open AccessThe European GeoMetre project: developing enhanced large-scale dimensional metrology for geodesy
: We provide a survey on the joint European research project “GeoMetre”, which explores novel technologies and their inclusion to existing surveying strategies to improve the traceability of geodetic reference frames to the SI definition of the metre. This work includes the development of novel distance meters with a range of up to 5 km, the realisation of optical multilateration systems for large structure monitoring at an operation distance of 50 m and beyond, and a novel strategy for GNSS-based distance determination. Different methods for refractivity compensation, based on classical sensors, on dispersion, on spectroscopic thermometry, and on the speed of sound to reduce the meteorological uncertainties in precise distance measurements, are developed further and characterised. These systems are validated at and applied to the novel European standard baseline EURO5000 at the Pieniny Kippen Belt, Poland, which was completely refurbished and intensely studied in this project. We use our novel instruments for a reduced uncertainty of the scale in the surveillance networks solutions for local tie measurements at space-geodetic co-location stations. We also investigate novel approaches like close-range photogrammetry to reference point determination of space-geodetic telescopes. Finally, we also investigate the inclusion of the local gravity field to consider the deviations of the vertical in the data analysis and to reduce the uncertainty of coordinate transformations in this complex problem.
- Open Access
Non-Contact Thermometer for Improved Air Temperature Measurements
A compact thermometer for air temperature based on the measurement of the speed of sound was developed at INRIM. This paper focuses on the comparison of this instrument with platinum resistance thermometers in a climatic chamber over a temperature range (−30 ÷ +55) °C, relative humidity (10 ÷ 90)%rh, and irradiation (>1 kW/m2) values similar to those of surface atmospheric conditions. Overall uncertainty values of 0.2 °C over the range from −30 °C to +30 °C, and from 0.6 °C to +55 °C, were found. Moreover, the instrument proved to be immune to irradiation errors and free from the need for temperature calibration.
Open AccessNon-Contact Thermometer for Improved Air Temperature Measurements
A compact thermometer for air temperature based on the measurement of the speed of sound was developed at INRIM. This paper focuses on the comparison of this instrument with platinum resistance thermometers in a climatic chamber over a temperature range (−30 ÷ +55) °C, relative humidity (10 ÷ 90)%rh, and irradiation (>1 kW/m2) values similar to those of surface atmospheric conditions. Overall uncertainty values of 0.2 °C over the range from −30 °C to +30 °C, and from 0.6 °C to +55 °C, were found. Moreover, the instrument proved to be immune to irradiation errors and free from the need for temperature calibration.
- Open Access
Improved Acoustic Thermometry for Long-Distance Temperature Measurements
Accurate measurements of long distances (in the order of tens of meters or more) are necessary in manufacturing processes of large structures, as, for example, in the aerospace industry. In the most demanding applications, the goal is to achieve a relative accuracy of 10−7 in the measurement of distances (e.g., 1 µm over 10 m). This goal can be obtained with laser interferometers whose accuracy is based on knowledge of the speed of light, which, in turn, depends on the temperature of air. A thermometer based on the measurement of the speed of sound in air has been realized at INRIM. Its purpose is the measurement of the air temperature along the measurement path of the interferometer with an accuracy of 0.1 °C at distances up to 11 m. The paper describes the principle and the experimental setup of the acoustic thermometer and demonstrates its performance by comparison with calibrated reference platinum resistance thermometers. Furthermore, we demonstrate the potentiality of the method to measure the vertical temperature gradient, which is the main error source in triangulation measurements when using laser trackers.
Open AccessImproved Acoustic Thermometry for Long-Distance Temperature Measurements
Accurate measurements of long distances (in the order of tens of meters or more) are necessary in manufacturing processes of large structures, as, for example, in the aerospace industry. In the most demanding applications, the goal is to achieve a relative accuracy of 10−7 in the measurement of distances (e.g., 1 µm over 10 m). This goal can be obtained with laser interferometers whose accuracy is based on knowledge of the speed of light, which, in turn, depends on the temperature of air. A thermometer based on the measurement of the speed of sound in air has been realized at INRIM. Its purpose is the measurement of the air temperature along the measurement path of the interferometer with an accuracy of 0.1 °C at distances up to 11 m. The paper describes the principle and the experimental setup of the acoustic thermometer and demonstrates its performance by comparison with calibrated reference platinum resistance thermometers. Furthermore, we demonstrate the potentiality of the method to measure the vertical temperature gradient, which is the main error source in triangulation measurements when using laser trackers.
- Open Access
- 5 January 2022
- Published by MDPI AG in Electronics
- Vol. 11 (1) , 165
Verification in Relevant Environment of a Physics-Based Synthetic Sensor for Flow Angle Estimation
In the area of synthetic sensors for flow angle estimation, the present work aims to describe the verification in a relevant environment of a physics-based approach using a dedicated technological demonstrator. The flow angle synthetic solution is based on a model-free, or physics-based, scheme and, therefore, it is applicable to any flying body. The demonstrator also encompasses physical sensors that provide all the necessary inputs to the synthetic sensors to estimate the angle-of-attack and the angle-of-sideslip. The uncertainty budgets of the physical sensors are evaluated to corrupt the flight simulator data with the aim of reproducing a realistic scenario to verify the synthetic sensors. The proposed approach for the flow angle estimation is suitable for modern and future aircraft, such as drones and urban mobility air vehicles. The results presented in this work show that the proposed approach can be effective in relevant scenarios even though some limitations can arise.
- 5 January 2022
- Published by MDPI AG in Electronics
- Vol. 11 (1) , 165
Open AccessVerification in Relevant Environment of a Physics-Based Synthetic Sensor for Flow Angle Estimation
In the area of synthetic sensors for flow angle estimation, the present work aims to describe the verification in a relevant environment of a physics-based approach using a dedicated technological demonstrator. The flow angle synthetic solution is based on a model-free, or physics-based, scheme and, therefore, it is applicable to any flying body. The demonstrator also encompasses physical sensors that provide all the necessary inputs to the synthetic sensors to estimate the angle-of-attack and the angle-of-sideslip. The uncertainty budgets of the physical sensors are evaluated to corrupt the flight simulator data with the aim of reproducing a realistic scenario to verify the synthetic sensors. The proposed approach for the flow angle estimation is suitable for modern and future aircraft, such as drones and urban mobility air vehicles. The results presented in this work show that the proposed approach can be effective in relevant scenarios even though some limitations can arise.