Ketavath Kumar Naik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ketavath Kumar Naik has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
B. V. S. Sailaja
Department of ECE, Antenna Research Laboratory, Koneru Lakshmaiah Education Foundation (KLEF), Guntur, India
6 shared publications- Dattatreya Gopi
Raghu Engineering College, Department of Electronics and Communication Engineering, Visakhapatnam, A.P, India
4 shared publications Chirukuri Naga Phaneendra
Department of ECE, Vignan's Lara Institute of Technology and Science, Guntur, AP, India
3 shared publicationsSriram Sandhya Rani
Department of ECE, JITS, Warangal, Telangana, India
3 shared publicationsBokkisam Venkata Sai Sailaja
Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation Deemed to be University, Guntur, India
2 shared publications- Bokkisam Venkata Sai Sailaja
Antenna Research Laboratory, Department of Electronics and Communication Engineering, KLEF (Deemed to be University), Vaddeswaram, Guntur, India
2 shared publications
Latest Publications
- 26 June 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (13)
Design of wideband CPW-Fed patch antenna with etched trapezoidal shape for modern multiband radar system applications
The growing requirement for compact and wideband antennas capable of supporting multiple radar bands has created an urgent need for designs that can efficiently operate across portions of the C-, X-, and Ku-band frequency ranges. This paper presents the design and analysis of an etched trapezoidal patch (ETP) antenna intended for multiband applications. The ETP antenna is built on a FR-4 substrate that measures 37.5 x 28 x 1.6 mm³ and uses a co-planar waveguide (CPW) feeding method. The antenna is capable of operating in three frequency bands, resonating at 7.52 GHz, 9.73 GHz, and 11.42 GHz with corresponding reflection coefficients of -31.33 dB, -44.27 dB and -23.80 dB. These frequencies cover part of the C/X/Ku-bands. The antenna functions across the impedance bandwidths of 1.18 GHz (6.55-7.73 GHz) and 3.64 GHz (8.76-12.40 GHz) of two resonance below -10 dB of reflation coefficient. The proposed ETP antenna achieves gains of 4.51 dBi, 3.18 dBi, and 4.28 dBi at 7.52 GHz, 9.73 GHz, and 11.42 GHz, respectively. This paper also covers the discussion of s-parameters, efficiency, 3D gain patterns, radiation patterns, and surface current distribution at the operating frequencies. Both simulated and measured results of the ETP antenna are compared and found to be consistent for multiband radar system applications especially for defence, remote sensing, and weather monitoring.
- 26 June 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (13)
Design of wideband CPW-Fed patch antenna with etched trapezoidal shape for modern multiband radar system applications
The growing requirement for compact and wideband antennas capable of supporting multiple radar bands has created an urgent need for designs that can efficiently operate across portions of the C-, X-, and Ku-band frequency ranges. This paper presents the design and analysis of an etched trapezoidal patch (ETP) antenna intended for multiband applications. The ETP antenna is built on a FR-4 substrate that measures 37.5 x 28 x 1.6 mm³ and uses a co-planar waveguide (CPW) feeding method. The antenna is capable of operating in three frequency bands, resonating at 7.52 GHz, 9.73 GHz, and 11.42 GHz with corresponding reflection coefficients of -31.33 dB, -44.27 dB and -23.80 dB. These frequencies cover part of the C/X/Ku-bands. The antenna functions across the impedance bandwidths of 1.18 GHz (6.55-7.73 GHz) and 3.64 GHz (8.76-12.40 GHz) of two resonance below -10 dB of reflation coefficient. The proposed ETP antenna achieves gains of 4.51 dBi, 3.18 dBi, and 4.28 dBi at 7.52 GHz, 9.73 GHz, and 11.42 GHz, respectively. This paper also covers the discussion of s-parameters, efficiency, 3D gain patterns, radiation patterns, and surface current distribution at the operating frequencies. Both simulated and measured results of the ETP antenna are compared and found to be consistent for multiband radar system applications especially for defence, remote sensing, and weather monitoring.
- Open Access
- 7 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Compact dual-band four-port MIMO patch antenna with inverse U-shaped resonators and defected ground structure for wireless communication applications
A compact four-port multiple-input multiple-output (MIMO) staircase rectangular patch antenna with inverse U-shaped resonators and a modified defected ground structure (MDGS) is presented for dual-band wireless communication applications. The antenna integrates four identical radiating elements placed orthogonally to achieve low mutual coupling and enhanced diversity. Fabricated on an FR-4 substrate with dimensions of 38 × 38 × 1.6 mm 3 , the design operates over two bandwidths (|S₁₁|< − 10 dB) of 6.8–8.9 GHz and 10.3–12.0 GHz, resonating at 7.9 GHz and 11 GHz, respectively. The structure achieves peak gains of 7.36 dBi and 5.82 dBi. MIMO performance is validated with an ECC below 0.01, DG greater than 9.95 dB, CCL below 0.02 bits/s/Hz, isolation exceeding 25 dB, mean effective gain (MEG) between − 9 dB and − 6 dB, and low TARC values. Simulated and measured results exhibit strong agreement, confirming the antenna’s potential for compact high-performance wireless devices within micro- and nanoscale integrated systems. The proposed design addresses key challenges in MIMO systems, such as minimizing mutual coupling, achieving wide dual-band operation, and maintaining compact size for integration in modern wireless devices.
- 7 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessCompact dual-band four-port MIMO patch antenna with inverse U-shaped resonators and defected ground structure for wireless communication applications
A compact four-port multiple-input multiple-output (MIMO) staircase rectangular patch antenna with inverse U-shaped resonators and a modified defected ground structure (MDGS) is presented for dual-band wireless communication applications. The antenna integrates four identical radiating elements placed orthogonally to achieve low mutual coupling and enhanced diversity. Fabricated on an FR-4 substrate with dimensions of 38 × 38 × 1.6 mm 3 , the design operates over two bandwidths (|S₁₁|< − 10 dB) of 6.8–8.9 GHz and 10.3–12.0 GHz, resonating at 7.9 GHz and 11 GHz, respectively. The structure achieves peak gains of 7.36 dBi and 5.82 dBi. MIMO performance is validated with an ECC below 0.01, DG greater than 9.95 dB, CCL below 0.02 bits/s/Hz, isolation exceeding 25 dB, mean effective gain (MEG) between − 9 dB and − 6 dB, and low TARC values. Simulated and measured results exhibit strong agreement, confirming the antenna’s potential for compact high-performance wireless devices within micro- and nanoscale integrated systems. The proposed design addresses key challenges in MIMO systems, such as minimizing mutual coupling, achieving wide dual-band operation, and maintaining compact size for integration in modern wireless devices.
- 1 March 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (5) , 055306
Design of wider impedance bandwidth with inverted cone shape patch antenna and hexagonal inverted split ring resonator for wireless communications
An inverted cone shape (ICS) patch antenna with hexagonal shape inverted split ring resonator (ISRR) is presented for radar and wireless communication applications. The hexagonal ISRR and the extended coplanar waveguide (CPW) feed considered to work the antenna with wider impedance bandwidth. The proposed antenna operates at 8.92 GHz and 10.89 GHz with wide impedance bandwidth of 4600 MHz (7.64 GHz to 12.24 GHz) . The maximum gain of 8.63 dBi and 5.38 dBi respectively are observed at the two operating frequencies. The proposed antenna produces good co-polarization by minimizing cross-polarization levels which reduces the interference for reliable communication. The good comparison between simulated and measured results has been observed. The proposed ICS antenna has a wideband antenna exhibiting dual-resonance behavior and is suitable for radar and wireless communication applications.
- 1 March 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (5) , 055306
Design of wider impedance bandwidth with inverted cone shape patch antenna and hexagonal inverted split ring resonator for wireless communications
An inverted cone shape (ICS) patch antenna with hexagonal shape inverted split ring resonator (ISRR) is presented for radar and wireless communication applications. The hexagonal ISRR and the extended coplanar waveguide (CPW) feed considered to work the antenna with wider impedance bandwidth. The proposed antenna operates at 8.92 GHz and 10.89 GHz with wide impedance bandwidth of 4600 MHz (7.64 GHz to 12.24 GHz) . The maximum gain of 8.63 dBi and 5.38 dBi respectively are observed at the two operating frequencies. The proposed antenna produces good co-polarization by minimizing cross-polarization levels which reduces the interference for reliable communication. The good comparison between simulated and measured results has been observed. The proposed ICS antenna has a wideband antenna exhibiting dual-resonance behavior and is suitable for radar and wireless communication applications.
- 1 March 2025
- Published by Springer Nature in Wireless Personal Communications
- Vol. 141 (1-2) , 97-112
Implementation of Wider Impedance Bandwidth with Dual-Band and L-Shape Slits on Patch Antenna for 5G Wireless Communications
- 1 March 2025
- Published by Springer Nature in Wireless Personal Communications
- Vol. 141 (1-2) , 97-112
Implementation of Wider Impedance Bandwidth with Dual-Band and L-Shape Slits on Patch Antenna for 5G Wireless Communications
- 10 September 2024
- Published by Springer Nature in Wireless Personal Communications
- Vol. 138 (2) , 1311-1327
Inset-Fed Octagonal-Shaped Quad-Port MIMO Patch Antenna for UWB Applications
- 10 September 2024
- Published by Springer Nature in Wireless Personal Communications
- Vol. 138 (2) , 1311-1327
Inset-Fed Octagonal-Shaped Quad-Port MIMO Patch Antenna for UWB Applications
- 24 July 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (8) , 085546
Dual-band inset-fed diamond-shaped patch MIMO antenna for wireless communication applications
A compact inset-fed rectangular-shaped multiple-input multiple-output (MIMO) patch antenna with a diamond-shaped slot is proposed for dual-band wireless communication applications. It comprises with two identical rectangular-shaped radiating elements. The proposed inset-fed diamond-shaped slot MIMO patch (IDSMP) antenna has overall dimensions is 20 × 40 × 1.6 mm3. To achieve low mutual coupling and good diversity performance, circular slots are etched on the ground plane and diamond slots are etched from the rectangular radiating patches. The edge-to-edge separation between the radiating elements is 4 mm. The IDSMP antenna is resonating at 8.2 GHz and 14.0 GHz frequencies and a gain of 5.63dBi and 5.43dBi respective operating frequency. It achieves the wider dual bandwidths of 400 MHz (8.00 GHz to 8.40 GHz) and 940 MHz (13.63 GHz to 14.57 GHz) of respective frequencies. The IDSMP antenna MIMO parameters are presented for the envelope correlation coefficient is < 0.0, diversity gain is > 9.9, channel capacity loss is < 0.1 bits/sec/Hz, mean effective gain is investigated (−4 dB < MEG < −7 dB), and total active reflection coefficient is also obtained. The simulated and experimentally attained values are presented, and it is showing fine agreement.
- 24 July 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (8) , 085546
Dual-band inset-fed diamond-shaped patch MIMO antenna for wireless communication applications
A compact inset-fed rectangular-shaped multiple-input multiple-output (MIMO) patch antenna with a diamond-shaped slot is proposed for dual-band wireless communication applications. It comprises with two identical rectangular-shaped radiating elements. The proposed inset-fed diamond-shaped slot MIMO patch (IDSMP) antenna has overall dimensions is 20 × 40 × 1.6 mm3. To achieve low mutual coupling and good diversity performance, circular slots are etched on the ground plane and diamond slots are etched from the rectangular radiating patches. The edge-to-edge separation between the radiating elements is 4 mm. The IDSMP antenna is resonating at 8.2 GHz and 14.0 GHz frequencies and a gain of 5.63dBi and 5.43dBi respective operating frequency. It achieves the wider dual bandwidths of 400 MHz (8.00 GHz to 8.40 GHz) and 940 MHz (13.63 GHz to 14.57 GHz) of respective frequencies. The IDSMP antenna MIMO parameters are presented for the envelope correlation coefficient is < 0.0, diversity gain is > 9.9, channel capacity loss is < 0.1 bits/sec/Hz, mean effective gain is investigated (−4 dB < MEG < −7 dB), and total active reflection coefficient is also obtained. The simulated and experimentally attained values are presented, and it is showing fine agreement.
- 1 May 2024
- Published by Springer Nature in Wireless Personal Communications
- Vol. 136 (2) , 689-700
Analysis and Design of Compact Single-Band Slots on Patch Antenna for Wireless Communication
- 1 May 2024
- Published by Springer Nature in Wireless Personal Communications
- Vol. 136 (2) , 689-700
Analysis and Design of Compact Single-Band Slots on Patch Antenna for Wireless Communication
- Open Access
- 10 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 5 (3) , 673-685
RF-MEMS Switch for Reconfigurable With Half-Moon Slots on Elliptical-Shaped Patch Antenna for 5G Applications
A compact dual-band reconfigurable elliptical-shaped patch antenna designed in this article. The proposed patch antenna with rectangular strip lines and an elliptical with half-moon slots presented to operate dual bands. To achieve the reconfigurability, RF-MEMS switches proposed on rectangular strip lines of the patch antenna. The capacitive shunt type RF-switch designed the proposed elliptical antenna to operate at 5G applications. The displacement of the proposed RF-MEMS switch with an air gap of $3~\mu $ m, the actuation of 5.02 V, and the stress of the proposed beam is bearable up to 85.7 MPa is observed. The reconfigurable elliptical-shaped patch antenna resonates at 8.34 GHz and 10.47 GHz with a reflection coefficient of −32.28 dB and −22.7 dB respectively. The operating frequencies and gains are observed at the RF-MEMS switch placed on a patch for dual bands for four states. At the state-I, two operating frequencies and gain are 8.4G Hz, and 10.52G Hz with 2.28 dBi, and 2.18 dBi. Similarly, state-II frequencies are 8.56 GHz, and 10.55 GHz with gains of 2.08 dBi, and 1.30 dBi; state-III frequencies are 8.49 GHz, 10.47 GHz with gains of 2.48 dBi, and 3.04 dBi; and state-IV, frequencies are 8.49 GHz, 10.49 GHz with gain of 2.58 dBi, and 2.64 dBi. The compact elliptical patch antenna was simulated and a measured value is presented in this article and also both values are agreed.
- 10 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 5 (3) , 673-685
Open AccessRF-MEMS Switch for Reconfigurable With Half-Moon Slots on Elliptical-Shaped Patch Antenna for 5G Applications
A compact dual-band reconfigurable elliptical-shaped patch antenna designed in this article. The proposed patch antenna with rectangular strip lines and an elliptical with half-moon slots presented to operate dual bands. To achieve the reconfigurability, RF-MEMS switches proposed on rectangular strip lines of the patch antenna. The capacitive shunt type RF-switch designed the proposed elliptical antenna to operate at 5G applications. The displacement of the proposed RF-MEMS switch with an air gap of $3~\mu $ m, the actuation of 5.02 V, and the stress of the proposed beam is bearable up to 85.7 MPa is observed. The reconfigurable elliptical-shaped patch antenna resonates at 8.34 GHz and 10.47 GHz with a reflection coefficient of −32.28 dB and −22.7 dB respectively. The operating frequencies and gains are observed at the RF-MEMS switch placed on a patch for dual bands for four states. At the state-I, two operating frequencies and gain are 8.4G Hz, and 10.52G Hz with 2.28 dBi, and 2.18 dBi. Similarly, state-II frequencies are 8.56 GHz, and 10.55 GHz with gains of 2.08 dBi, and 1.30 dBi; state-III frequencies are 8.49 GHz, 10.47 GHz with gains of 2.48 dBi, and 3.04 dBi; and state-IV, frequencies are 8.49 GHz, 10.49 GHz with gain of 2.58 dBi, and 2.64 dBi. The compact elliptical patch antenna was simulated and a measured value is presented in this article and also both values are agreed.
- 12 February 2024
- Published by Springer Nature in Wireless Networks
- Vol. 30 (4) , 2343-2351
Asymmetric CPW-fed patch antenna with slits at terahertz applications for 6G wireless communications
- 12 February 2024
- Published by Springer Nature in Wireless Networks
- Vol. 30 (4) , 2343-2351
Asymmetric CPW-fed patch antenna with slits at terahertz applications for 6G wireless communications
- 8 April 2023
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 65 (8) , 2392-2398
Dual‐band crescent‐shaped slot patch antenna for wireless communications and IoT applications
The investigation of two half circular patch (HCP) antenna with defected ground structure to operate dual bands is presented in this study for wireless communications. The crescent slots etched on the HCPs are proposed to operate the dual bands of below −10 dB reflection coefficient, with the impedance bandwidth of the first band being 740 MHz (3.01–3.75 GHz) and of the second band being 7120 MHz (6.74–13.86 GHz). The proposed HCP antenna was resonates of 3.36 and 12.17 GHz with −33.9 and −35.47 dB reflection coefficients. This antenna produces a maximum gain of 5.46 and 6.61 dB for these resonating frequencies, respectively. The simulation and measured radiation pattern results are also presented for proposed HCP antenna and it operates for wireless communications and internet of things applications.
- 8 April 2023
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 65 (8) , 2392-2398
Dual‐band crescent‐shaped slot patch antenna for wireless communications and IoT applications
The investigation of two half circular patch (HCP) antenna with defected ground structure to operate dual bands is presented in this study for wireless communications. The crescent slots etched on the HCPs are proposed to operate the dual bands of below −10 dB reflection coefficient, with the impedance bandwidth of the first band being 740 MHz (3.01–3.75 GHz) and of the second band being 7120 MHz (6.74–13.86 GHz). The proposed HCP antenna was resonates of 3.36 and 12.17 GHz with −33.9 and −35.47 dB reflection coefficients. This antenna produces a maximum gain of 5.46 and 6.61 dB for these resonating frequencies, respectively. The simulation and measured radiation pattern results are also presented for proposed HCP antenna and it operates for wireless communications and internet of things applications.