Chiara Sacco
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chiara Sacco has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Pasquale Orgiani
CNR-IOM Istituto Officina dei Materiali, Trieste, Italy
8 shared publications - Alice Galdi
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
7 shared publications - Luigi Maritato
Department of Industrial Engineering, University of Salerno, 84084 Fisciano, Italy
5 shared publications - Nunzia Coppola
Università degli Studi di Salerno
5 shared publications Alice Galdi
2 shared publications- Carlo Barone
Dipartimento di Fisica “E.R. Caianiello”, Università degli Studi di Salerno, Fisciano, Italy
2 shared publications
Latest Publications
- Open Access
- 26 March 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (7) , 1092
Comparing Thickness and Doping-Induced Effects on the Normal States of Infinite-Layer Electron-Doped Cuprates: Is There Anything to Learn?
We grew Sr1-xLaxCuO2 thin films and SrCuO2/Sr0.9La0.1CuO2/SrCuO2 trilayers by reflection high-energy diffraction-calibrated layer-by-layer molecular beam epitaxy, to study their electrical transport properties as a function of the doping and thickness of the central Sr0.9La0.1CuO2 layer. For the trilayer samples, as already observed in underdoped SLCO films, the electrical resistivity versus temperature curves as a function of the central layer thickness show, for thicknesses thinner than 20 unit cells, sudden upturns in the low temperature range with the possibility for identifying, in the normal state, the T* and a T** temperatures, respectively, separating high-temperature linear behavior and low-temperature quadratic dependence. By plotting the T* and T** values as a function of TConset for both the thin films and the trilayers, the data fall on the same curves. This result suggests that, for the investigated trilayers, the superconducting critical temperature is the important parameter able to describe the normal state properties and that, in the limit of very thin central layers, such properties are mainly influenced by the modification of the energy band structure and not by interface-related disorder.
- 26 March 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (7) , 1092
Open AccessComparing Thickness and Doping-Induced Effects on the Normal States of Infinite-Layer Electron-Doped Cuprates: Is There Anything to Learn?
We grew Sr1-xLaxCuO2 thin films and SrCuO2/Sr0.9La0.1CuO2/SrCuO2 trilayers by reflection high-energy diffraction-calibrated layer-by-layer molecular beam epitaxy, to study their electrical transport properties as a function of the doping and thickness of the central Sr0.9La0.1CuO2 layer. For the trilayer samples, as already observed in underdoped SLCO films, the electrical resistivity versus temperature curves as a function of the central layer thickness show, for thicknesses thinner than 20 unit cells, sudden upturns in the low temperature range with the possibility for identifying, in the normal state, the T* and a T** temperatures, respectively, separating high-temperature linear behavior and low-temperature quadratic dependence. By plotting the T* and T** values as a function of TConset for both the thin films and the trilayers, the data fall on the same curves. This result suggests that, for the investigated trilayers, the superconducting critical temperature is the important parameter able to describe the normal state properties and that, in the limit of very thin central layers, such properties are mainly influenced by the modification of the energy band structure and not by interface-related disorder.
- 1 April 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (23) , 12997-13008
Optimization of the electrical performances in Solid Oxide Fuel Cells with room temperature sputter deposited Gd0.1ce0.9o1.95 buffer layers by controlling their granularity via the in-air annealing step
- 1 April 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (23) , 12997-13008
Optimization of the electrical performances in Solid Oxide Fuel Cells with room temperature sputter deposited Gd0.1ce0.9o1.95 buffer layers by controlling their granularity via the in-air annealing step
- 2 August 2019
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 31 (44) , 445601
Low temperature hidden Fermi-liquid charge transport in under doped La x Sr 1− x CuO 2 infinite layer electron-doped thin films
We have studied the low temperature electrical transport properties of La x Sr 1− x CuO 2 thin films grown by oxide molecular beam epitaxy on (1 1 0) GdScO 3 and TbScO 3 substrates. The transmission electron microscopy measurements and the x-ray diffraction analysis confirmed the epitaxy of the obtained films and the study of their normal state transport properties, removing the ambiguity regarding the truly conducting layer, allowed to highlight the presence of a robust hidden Fermi liquid charge transport in the low temperature properties of infinite layer electron doped cuprate superconductors. These results are in agreement with recent observations performed in other p and n doped cuprate materials and point toward a general description of the superconducting and normal state properties in these compounds.
- 2 August 2019
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 31 (44) , 445601
Low temperature hidden Fermi-liquid charge transport in under doped La x Sr 1− x CuO 2 infinite layer electron-doped thin films
We have studied the low temperature electrical transport properties of La x Sr 1− x CuO 2 thin films grown by oxide molecular beam epitaxy on (1 1 0) GdScO 3 and TbScO 3 substrates. The transmission electron microscopy measurements and the x-ray diffraction analysis confirmed the epitaxy of the obtained films and the study of their normal state transport properties, removing the ambiguity regarding the truly conducting layer, allowed to highlight the presence of a robust hidden Fermi liquid charge transport in the low temperature properties of infinite layer electron doped cuprate superconductors. These results are in agreement with recent observations performed in other p and n doped cuprate materials and point toward a general description of the superconducting and normal state properties in these compounds.
- 1 February 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 52 (13) , 135303
Carrier confinement effects observed in the normal-state electrical transport of electron-doped cuprate trilayers
SrCuO 2 /Sr 0.9 La 0.1 CuO 2 /SrCuO 2 trilayers were grown by oxide-molecular beam epitaxy. The thicknesses of the top and bottom SrCuO 2 layers were fixed, while the thickness of the infinite-layer electron-doped cuprate Sr 0.9 La 0.1 CuO 2 central layer was systematically changed. Transmission electron microscopy, x-ray reflectivity and x-ray diffraction measurements were performed to assess the sample quality and the abruptness of the interfaces. Electrical transport measurements as a function of temperature and as a function of central layer thickness, confirm that the normal state properties of the trilayers are altered by the confinement of the charge carriers in the central layer.
- 1 February 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 52 (13) , 135303
Carrier confinement effects observed in the normal-state electrical transport of electron-doped cuprate trilayers
SrCuO 2 /Sr 0.9 La 0.1 CuO 2 /SrCuO 2 trilayers were grown by oxide-molecular beam epitaxy. The thicknesses of the top and bottom SrCuO 2 layers were fixed, while the thickness of the infinite-layer electron-doped cuprate Sr 0.9 La 0.1 CuO 2 central layer was systematically changed. Transmission electron microscopy, x-ray reflectivity and x-ray diffraction measurements were performed to assess the sample quality and the abruptness of the interfaces. Electrical transport measurements as a function of temperature and as a function of central layer thickness, confirm that the normal state properties of the trilayers are altered by the confinement of the charge carriers in the central layer.
- Open Access
Structural and Electrical Characterization of Sputter-Deposited Gd0.1Ce0.9O2−δ Thin Buffer Layers at the Y-Stabilized Zirconia Electrolyte Interface for IT-Solid Oxide Cells
The use of a doped Ceria buffer layer and Physical Vapour Deposition (PVD) techniques for Solid Oxide Fuel Cells (SOFC) fabrication can limit the former, the formation of electrical insulating lanthanum, and strontium zirconates at the cathode/electrolyte interface, whereas the latter allows a better control of the materials interfaces. These effects allow for operation at intermediate temperature ranges. In this work, we study the structural and electrical properties of Gadolinium Doped Ceria (GDC) barrier layer deposited via the room temperature RF Sputtering technique on anode supported electrolytes and then annealed at high temperature. The crystal structure and the surface morphology of the GDC barrier layers have been analyzed and optimized varying the temperature ramp of the post-growth annealing procedure. The electrical behavior of the obtained samples has been investigated by Electrochemical Impedance Spectroscopy and compared to that of standard SOFC with screen-printed GDC barrier layers, the former showing a maximum high frequency and low frequency resistances reduction of about 50% and 46%, respectively, with respect to the latter at an operating temperature of 650 °C. The results clearly show an important improvement of SOFC performances when using sputter deposited GDC layers, linking the electrical properties to the structural and stoichiometric ones.
Open AccessStructural and Electrical Characterization of Sputter-Deposited Gd0.1Ce0.9O2−δ Thin Buffer Layers at the Y-Stabilized Zirconia Electrolyte Interface for IT-Solid Oxide Cells
The use of a doped Ceria buffer layer and Physical Vapour Deposition (PVD) techniques for Solid Oxide Fuel Cells (SOFC) fabrication can limit the former, the formation of electrical insulating lanthanum, and strontium zirconates at the cathode/electrolyte interface, whereas the latter allows a better control of the materials interfaces. These effects allow for operation at intermediate temperature ranges. In this work, we study the structural and electrical properties of Gadolinium Doped Ceria (GDC) barrier layer deposited via the room temperature RF Sputtering technique on anode supported electrolytes and then annealed at high temperature. The crystal structure and the surface morphology of the GDC barrier layers have been analyzed and optimized varying the temperature ramp of the post-growth annealing procedure. The electrical behavior of the obtained samples has been investigated by Electrochemical Impedance Spectroscopy and compared to that of standard SOFC with screen-printed GDC barrier layers, the former showing a maximum high frequency and low frequency resistances reduction of about 50% and 46%, respectively, with respect to the latter at an operating temperature of 650 °C. The results clearly show an important improvement of SOFC performances when using sputter deposited GDC layers, linking the electrical properties to the structural and stoichiometric ones.
- 23 March 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 123 (12) , 123901
X-ray absorption spectroscopy study of annealing process on Sr1–xLaxCuO2 electron-doped cuprate thin films
The superconducting properties of Sr1–xLaxCuO2 thin films are strongly affected by sample preparation procedures, including the annealing step, which are not always well controlled. We have studied the evolution of Cu L2,3 and O K edge x-ray absorption spectra (XAS) of Sr1–xLaxCuO2 thin films as a function of reducing annealing, both qualitatively and quantitatively. By using linearly polarized radiation, we are able to identify the signatures of the presence of apical oxygen in the as-grown sample and its gradual removal as a function of duration of 350 °C Ar annealing performed on the same sample. Even though the as-grown sample appears to be hole doped, we cannot identify the signature of the Zhang-Rice singlet in the O K XAS, and it is extremely unlikely that the interstitial excess oxygen can give rise to a superconducting or even a metallic ground state. XAS and x-ray linear dichroism analyses are, therefore, shown to be valuable tools to improving the control over the annealing process of electron doped superconductors.
- 23 March 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 123 (12) , 123901
X-ray absorption spectroscopy study of annealing process on Sr1–xLaxCuO2 electron-doped cuprate thin films
The superconducting properties of Sr1–xLaxCuO2 thin films are strongly affected by sample preparation procedures, including the annealing step, which are not always well controlled. We have studied the evolution of Cu L2,3 and O K edge x-ray absorption spectra (XAS) of Sr1–xLaxCuO2 thin films as a function of reducing annealing, both qualitatively and quantitatively. By using linearly polarized radiation, we are able to identify the signatures of the presence of apical oxygen in the as-grown sample and its gradual removal as a function of duration of 350 °C Ar annealing performed on the same sample. Even though the as-grown sample appears to be hole doped, we cannot identify the signature of the Zhang-Rice singlet in the O K XAS, and it is extremely unlikely that the interstitial excess oxygen can give rise to a superconducting or even a metallic ground state. XAS and x-ray linear dichroism analyses are, therefore, shown to be valuable tools to improving the control over the annealing process of electron doped superconductors.
- 24 April 2017
- Published by AIP Publishing in Applied Physics Letters
- Vol. 110 (17)
Structural and electronic properties of Bi2Se3 topological insulator thin films grown by pulsed laser deposition
We report on epitaxial growth of Bi2Se3 topological insulator thin films by Pulsed Laser Deposition (PLD). X-ray diffraction investigation confirms that Bi2Se3 with a single (001)-orientation can be obtained on several substrates in a narrow (i.e., 20 °C) range of deposition temperatures and at high deposition pressure (i.e., 0.1 mbar). However, only films grown on (001)-Al2O3 substrates show an almost-unique in-plane orientation. In-situ spin-resolved angular resolved photoemission spectroscopy experiments, performed at the NFFA-APE facility of IOM-CNR and Elettra (Trieste), show a single Dirac cone with the Dirac point at eV located in the center of the Brillouin zone and the spin polarization of the topological surface states. These results demonstrate that the topological surface state can be obtained in PLD-grown Bi2Se3 thin films.- 24 April 2017
- Published by AIP Publishing in Applied Physics Letters
- Vol. 110 (17)
Structural and electronic properties of Bi2Se3 topological insulator thin films grown by pulsed laser deposition
We report on epitaxial growth of Bi2Se3 topological insulator thin films by Pulsed Laser Deposition (PLD). X-ray diffraction investigation confirms that Bi2Se3 with a single (001)-orientation can be obtained on several substrates in a narrow (i.e., 20 °C) range of deposition temperatures and at high deposition pressure (i.e., 0.1 mbar). However, only films grown on (001)-Al2O3 substrates show an almost-unique in-plane orientation. In-situ spin-resolved angular resolved photoemission spectroscopy experiments, performed at the NFFA-APE facility of IOM-CNR and Elettra (Trieste), show a single Dirac cone with the Dirac point at eV located in the center of the Brillouin zone and the spin polarization of the topological surface states. These results demonstrate that the topological surface state can be obtained in PLD-grown Bi2Se3 thin films.- 1 February 2017
- Published by Elsevier in Journal of Crystal Growth
- Vol. 459, 56-60
Growth and characterization of charge carrier spatially confined SrMnO3/La0.7Sr0.3MnO3/SrMnO3 trilayers
- 1 February 2017
- Published by Elsevier in Journal of Crystal Growth
- Vol. 459, 56-60
Growth and characterization of charge carrier spatially confined SrMnO3/La0.7Sr0.3MnO3/SrMnO3 trilayers
- 9 March 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 26 (3) , 1-4
Noise Spectroscopy Investigation of Interplay Between Quantum Interference Effects and Superconductivity in Infinite Layer Cuprates
The interplay between quantum interference effects and superconductivity has been investigated in infinite layer Sr 1-x La x CuO 2±δ thin films by using a combination of standard dc electric transport measurements and noise characterization. A marked resistivity upturn at a temperature of 110 K has been observed in underdoped samples, which also showed a superconductive transition at about 25 K. The resistivity behavior has been attributed to weak localization and has been investigated by detailed low-frequency voltage-spectral density measurements. In particular, peculiar linear dependence of the 1/f noise on the bias current is found in the weak-localization regime, whereas the usual quadratic dependence of the 1/f component occurs in the superconducting and metallic regions.
- 9 March 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 26 (3) , 1-4
Noise Spectroscopy Investigation of Interplay Between Quantum Interference Effects and Superconductivity in Infinite Layer Cuprates
The interplay between quantum interference effects and superconductivity has been investigated in infinite layer Sr 1-x La x CuO 2±δ thin films by using a combination of standard dc electric transport measurements and noise characterization. A marked resistivity upturn at a temperature of 110 K has been observed in underdoped samples, which also showed a superconductive transition at about 25 K. The resistivity behavior has been attributed to weak localization and has been investigated by detailed low-frequency voltage-spectral density measurements. In particular, peculiar linear dependence of the 1/f noise on the bias current is found in the weak-localization regime, whereas the usual quadratic dependence of the 1/f component occurs in the superconducting and metallic regions.
- 18 September 2015
- Published by Springer Nature in Journal of Superconductivity and Novel Magnetism
- Vol. 28 (12) , 3481-3486
The Role of Quantum Interference Effects in Normal-State Transport Properties of Electron-Doped Cuprates
- 18 September 2015
- Published by Springer Nature in Journal of Superconductivity and Novel Magnetism
- Vol. 28 (12) , 3481-3486
The Role of Quantum Interference Effects in Normal-State Transport Properties of Electron-Doped Cuprates