Diego Cabello
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Diego Cabello has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
- Victor Manuel Brea
CiTIUS Univ. of Santiago de Compostela Spain
52 shared publications - Paula Lopez
Centro Singular de Investigacin en Tecnoloxas Intelixentes (CiTIUS), Universidade de Santiago de Compostela, Santiago de Compostela, Spain
46 shared publications - Esteban Ferro
Centro de Investigación en Tecnoloxías da Información (CITIUS), University of Santiago de Compostela, Santiago de Compostela, Spain
12 shared publications - Maria José Carreira
Centro Singular de Investigación en Tecnoloxías Intelixentes (CiTIUS), Universidade de Santiago de Compostela, Santiago de Compostela, Spain
12 shared publications D.L. Vilarino
11 shared publications- Manuel Gonzalez Penedo
Universidade da Coruña
10 shared publications
Latest Publications
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (7) , 11927-11935
HOPBAS10K: A 98 × 98 Pixels CMOS Vision Sensor for Background Subtraction
Background subtraction is one of the first visual tasks in many video processing applications. In this work, we introduce a hardware adaptation of a top-ranked rule-based algorithm, the Pixel-Based Adaptive Segmenter (PBAS), implemented on an integrated circuit with on-focal plane processing. On average, our hardware-oriented PBAS (HO-PBAS) proposal features a similar algorithm performance to that of the original PBAS with the benefit of a reduced number of samples of the background model and linear equations, and thus a simpler overall model. This algorithm was implemented as a 98×98 pixels full-custom mixed-signal 180 nm standard CMOS vision sensor. This solution features in-pixel processing with resource sharing strategies and 47 μm pixel pitch. The in-pixel processing includes the whole algorithm data path along with image pre-processing. The assessment of our implementation through F-Measure metrics with images captured by our chip from the public dataset changedetection shown on a PC screen results in a decrease of performance of only 6.7% with respect to the software version of PBAS.
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (7) , 11927-11935
HOPBAS10K: A 98 × 98 Pixels CMOS Vision Sensor for Background Subtraction
Background subtraction is one of the first visual tasks in many video processing applications. In this work, we introduce a hardware adaptation of a top-ranked rule-based algorithm, the Pixel-Based Adaptive Segmenter (PBAS), implemented on an integrated circuit with on-focal plane processing. On average, our hardware-oriented PBAS (HO-PBAS) proposal features a similar algorithm performance to that of the original PBAS with the benefit of a reduced number of samples of the background model and linear equations, and thus a simpler overall model. This algorithm was implemented as a 98×98 pixels full-custom mixed-signal 180 nm standard CMOS vision sensor. This solution features in-pixel processing with resource sharing strategies and 47 μm pixel pitch. The in-pixel processing includes the whole algorithm data path along with image pre-processing. The assessment of our implementation through F-Measure metrics with images captured by our chip from the public dataset changedetection shown on a PC screen results in a decrease of performance of only 6.7% with respect to the software version of PBAS.
- 25 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (3) , 844-848
An 11 mA Capacitor-Less LDO With 3.08 nA Quiescent Current and SSF-Based Adaptive Biasing
This brief presents an ultra-low power low-dropout (LDO) regulator with an experimental total quiescent current consumption of only 3.08 nA. The circuit is designed to operate with a load current in the range 0 - 11 mA. A novel adaptive biasing scheme based on a super source follower (SSF) structure is proposed, which measures the absolute voltage difference between the two inputs of the LDO’s error amplifier and modifies the biasing current accordingly. Thus, the transient response of the regulator is improved by counteracting the effect of using such a low bias current. The proposed LDO has been fabricated in a standard CMOS 180 nm process and the experimental characterization showed an outstanding performance in terms of maximum load current over quiescent current consumption ratio.
- 25 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (3) , 844-848
An 11 mA Capacitor-Less LDO With 3.08 nA Quiescent Current and SSF-Based Adaptive Biasing
This brief presents an ultra-low power low-dropout (LDO) regulator with an experimental total quiescent current consumption of only 3.08 nA. The circuit is designed to operate with a load current in the range 0 - 11 mA. A novel adaptive biasing scheme based on a super source follower (SSF) structure is proposed, which measures the absolute voltage difference between the two inputs of the LDO’s error amplifier and modifies the biasing current accordingly. Thus, the transient response of the regulator is improved by counteracting the effect of using such a low bias current. The proposed LDO has been fabricated in a standard CMOS 180 nm process and the experimental characterization showed an outstanding performance in terms of maximum load current over quiescent current consumption ratio.
- 3 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (15) , 6553
Corrections to “Wireless Sensor Network With Perpetual Motes for Terrestrial Snail Activity Monitoring”
In the above paper [1] , the funding information should be read as follows.
- 3 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (15) , 6553
Corrections to “Wireless Sensor Network With Perpetual Motes for Terrestrial Snail Activity Monitoring”
In the above paper [1] , the funding information should be read as follows.
- 2 July 2019
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 47 (7) , 991-1005
Ultralow power voltage reference circuit for implantable devices in standard CMOS technology
Summary: An ultralow power CMOS voltage reference for body implantable devices is presented in this paper. The circuit core consists of only regular threshold voltage PMOS transistors, thus leading to a very reduced output voltage dispersion, defined as σ/μ, and extremely low power consumption. A mathematical model of the generated reference voltage was obtained by solving circuit equations, and its numerical solution has been validated by extensive electrical simulations using a commercial circuit simulator. The proposed solution incorporates a passive RC low‐pass filter, to enhance power supply rejection (PSR) over a wide frequency range, and a speed‐up section, to accelerate the switching‐on of the circuit. The prototype was implemented in 0.18 μm standard CMOS technology and is able to operate with supply voltages ranging from 0.7 to 1.8 V providing a measured output voltage value of 584.2 mV at the target temperature of 36° C. The measured σ/μ dispersion of the reference voltage generated is 0.65% without the need of trimming. At the minimum supply of 0.7 V, the experimental power consumption is 64.5 pW, while the measured PSR is kept below –60 dB from DC up to the MHz frequency range.
- 2 July 2019
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 47 (7) , 991-1005
Ultralow power voltage reference circuit for implantable devices in standard CMOS technology
Summary: An ultralow power CMOS voltage reference for body implantable devices is presented in this paper. The circuit core consists of only regular threshold voltage PMOS transistors, thus leading to a very reduced output voltage dispersion, defined as σ/μ, and extremely low power consumption. A mathematical model of the generated reference voltage was obtained by solving circuit equations, and its numerical solution has been validated by extensive electrical simulations using a commercial circuit simulator. The proposed solution incorporates a passive RC low‐pass filter, to enhance power supply rejection (PSR) over a wide frequency range, and a speed‐up section, to accelerate the switching‐on of the circuit. The prototype was implemented in 0.18 μm standard CMOS technology and is able to operate with supply voltages ranging from 0.7 to 1.8 V providing a measured output voltage value of 584.2 mV at the target temperature of 36° C. The measured σ/μ dispersion of the reference voltage generated is 0.65% without the need of trimming. At the minimum supply of 0.7 V, the experimental power consumption is 64.5 pW, while the measured PSR is kept below –60 dB from DC up to the MHz frequency range.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21581525,p. 1-5
Time-of-Flight Pixel with Homodyne Phase Demodulation in Standard CMOS Technology
This paper presents an indirect Time-of-Flight sensor for standard CMOS technologies with an alternative demodulation scheme based on homodyne techniques. This avoids control signals shorter than the period of the emitted light signal, which prevents synchronization issues and minimizes switching effects like charge injection and clock feedthrough. The feasibility of the pixel and the demodulation scheme is demonstrated through simulations.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21581525,p. 1-5
Time-of-Flight Pixel with Homodyne Phase Demodulation in Standard CMOS Technology
This paper presents an indirect Time-of-Flight sensor for standard CMOS technologies with an alternative demodulation scheme based on homodyne techniques. This avoids control signals shorter than the period of the emitted light signal, which prevents synchronization issues and minimizes switching effects like charge injection and clock feedthrough. The feasibility of the pixel and the demodulation scheme is demonstrated through simulations.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21581525,p. 1-5
On-Chip Solar Cell and PMU on the Same Substrate with Cold Start-Up from nW and 80 dB of Input Power Range for Biomedical Applications
This paper presents a 1 mm 2 solar cell and a Power Management Unit (PMU) on the same substrate to rise up the harvested voltage above 1.1 V to power wearable or implantable devices. The on-chip solar cell and the PMU are fabricated in standard 0.18 μm CMOS technology achieving a form factor of 1.575 mm 2 . Experimental results show that the PMU is able to start-up from a harvested power of 2.38 nW without any external kick off or control signal and can handle a harvested power up to μW with a continuous and two-dimensional Maximum Power Point Tracking (MPPT) that works in open-loop mode to set the frequency, the gain and the capacitor sizes of a charge pump.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21581525,p. 1-5
On-Chip Solar Cell and PMU on the Same Substrate with Cold Start-Up from nW and 80 dB of Input Power Range for Biomedical Applications
This paper presents a 1 mm 2 solar cell and a Power Management Unit (PMU) on the same substrate to rise up the harvested voltage above 1.1 V to power wearable or implantable devices. The on-chip solar cell and the PMU are fabricated in standard 0.18 μm CMOS technology achieving a form factor of 1.575 mm 2 . Experimental results show that the PMU is able to start-up from a harvested power of 2.38 nW without any external kick off or control signal and can handle a harvested power up to μW with a continuous and two-dimensional Maximum Power Point Tracking (MPPT) that works in open-loop mode to set the frequency, the gain and the capacitor sizes of a charge pump.
- 19 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (6) , 5105-5116
Micro-Energy Harvesting System Including a PMU and a Solar Cell on the Same Substrate With Cold Startup From 2.38 nW and Input Power Range up to 10 $\mu$W Using Continuous MPPT
This paper presents a Power Management Unit (PMU) powered by a 1 mm $^2$ solar cell on the same substrate to rise up the harvested voltage above 1.1 V. The on-chip solar cell and the PMU are fabricated in standard 0.18 μm CMOS technology achieving a form factor of 1.575 mm $^2$ . The PMU is able to start up from a harvested power of 2.38 nW without any external kick off or control signal. The PMU features a continuous and two-dimensional Maximum Power Point Tracking (MPPT) working in open-loop mode to handle a harvested power range from nW to $\mu$ W, by modifying both the charge pump topology and the switching frequency. The MPPT is based on four voltage level detectors that define five working regions depending on the illumination and on a self-tuning reference current for a fine adjustment of the switching frequency. The chip also includes an auxiliary charge pump to generate the voltage level necessary for the control circuit, implemented as a Pelliconi charge pump of 8 stages with NMOS transistors in Pwell as diodes. A Dickson charge pump with transmission gates as switches and with variable gain and capacitance per stage is also designed as the main charge pump. Finally, two relaxation oscillators are implemented to drive both charge pumps. This paper is accompanied by a video file demonstrating the PMU operation by powering an off-chip NAND gate.- 19 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (6) , 5105-5116
Micro-Energy Harvesting System Including a PMU and a Solar Cell on the Same Substrate With Cold Startup From 2.38 nW and Input Power Range up to 10 $\mu$W Using Continuous MPPT
This paper presents a Power Management Unit (PMU) powered by a 1 mm $^2$ solar cell on the same substrate to rise up the harvested voltage above 1.1 V. The on-chip solar cell and the PMU are fabricated in standard 0.18 μm CMOS technology achieving a form factor of 1.575 mm $^2$ . The PMU is able to start up from a harvested power of 2.38 nW without any external kick off or control signal. The PMU features a continuous and two-dimensional Maximum Power Point Tracking (MPPT) working in open-loop mode to handle a harvested power range from nW to $\mu$ W, by modifying both the charge pump topology and the switching frequency. The MPPT is based on four voltage level detectors that define five working regions depending on the illumination and on a self-tuning reference current for a fine adjustment of the switching frequency. The chip also includes an auxiliary charge pump to generate the voltage level necessary for the control circuit, implemented as a Pelliconi charge pump of 8 stages with NMOS transistors in Pwell as diodes. A Dickson charge pump with transmission gates as switches and with variable gain and capacitance per stage is also designed as the main charge pump. Finally, two relaxation oscillators are implemented to drive both charge pumps. This paper is accompanied by a video file demonstrating the PMU operation by powering an off-chip NAND gate.- Open Access
- 3 September 2018
- Published by Association for Computing Machinery (ACM)
- p. 1-2
Results of 'iCaveats', a Project on the Integration of Architectures and Components for Embedded Vision
- 3 September 2018
- Published by Association for Computing Machinery (ACM)
- p. 1-2
Open AccessResults of 'iCaveats', a Project on the Integration of Architectures and Components for Embedded Vision
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Impact of Analog Memories Non-Idealities on the Performance of Foreground Detection Algorithms
The high number of memory accesses in background subtraction algorithms constraints the choice of the memory topology of an analog implementation of a hardware-oriented version of the well-known PBAS algorithm (HO-PBAS). As the first step towards the implementation of a CMOS vision chip with per-pixel processing to run the HO-PBAS, this work assesses the impact of the circuit non-idealities of the three main analog memory topologies into the segmentation result on the CDNET database.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Impact of Analog Memories Non-Idealities on the Performance of Foreground Detection Algorithms
The high number of memory accesses in background subtraction algorithms constraints the choice of the memory topology of an analog implementation of a hardware-oriented version of the well-known PBAS algorithm (HO-PBAS). As the first step towards the implementation of a CMOS vision chip with per-pixel processing to run the HO-PBAS, this work assesses the impact of the circuit non-idealities of the three main analog memory topologies into the segmentation result on the CDNET database.