Yijun Zhang
Research Subjects
Yijun Zhang has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Yang-Tse Cheng
University of Kentucky
4 shared publications David S. Grummon
Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, Michigan 48824
3 shared publications- David S. Grummon
Michigan State University
1 shared publication
Latest Publications
- 1 October 2007
- Published by Springer Nature in Journal of Materials Research
- Vol. 22 (10) , 2851-2855
Understanding indentation-induced two-way shape memory effect
Spherical indents in NiTi shape memory alloys can have reversible depth change: deeper depth in the martensitic phase at low temperature and shallower depth in the austenitic phase at high temperature. This is the indentation-induced two-way shape memory effect. After polishing the indents, two-way reversible surface protrusions can occur on the shape memory alloy surfaces upon heating and cooling. The height of the surface protrusion is about the same as the depth of the reversible indent. Further polishing reduces the height of the surface protrusion, which disappears completely when the polished depth is about the length of the contact radius. By comparing finite element analysis and experimental data, we show that the depth at which a protrusion disappears is close to the 10% strain boundary. This suggests that slip-plasticity is responsible for the observed indentation-induced two-way shape memory effect.
- 1 October 2007
- Published by Springer Nature in Journal of Materials Research
- Vol. 22 (10) , 2851-2855
Understanding indentation-induced two-way shape memory effect
Spherical indents in NiTi shape memory alloys can have reversible depth change: deeper depth in the martensitic phase at low temperature and shallower depth in the austenitic phase at high temperature. This is the indentation-induced two-way shape memory effect. After polishing the indents, two-way reversible surface protrusions can occur on the shape memory alloy surfaces upon heating and cooling. The height of the surface protrusion is about the same as the depth of the reversible indent. Further polishing reduces the height of the surface protrusion, which disappears completely when the polished depth is about the length of the contact radius. By comparing finite element analysis and experimental data, we show that the depth at which a protrusion disappears is close to the 10% strain boundary. This suggests that slip-plasticity is responsible for the observed indentation-induced two-way shape memory effect.
- 1 March 2007
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 101 (5) , 053507
Finite element modeling of indentation-induced superelastic effect using a three-dimensional constitutive model for shape memory materials with plasticity
Indentation-induced shape memory and superelastic effects are recently discovered thermo-mechanical behaviors that may find important applications in many areas of science and engineering. Theoretical understanding of these phenomena is challenging because both martensitic phase transformation and slip plasticity exist under complex contact loading conditions. In this paper, we develop a three-dimensional constitutive model of shape memory alloys with plasticity. Spherical indentation-induced superelasticity in a NiTi shape memory alloy was simulated and compared to experimental results on load-displacement curves and recovery ratios. We show that shallow indents have complete recovery upon unloading, where the size of the phase transformation region is about two times the contact radius. Deep indents have only partial recovery when plastic deformation becomes more prevalent in the indent-affected zone.
- 1 March 2007
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 101 (5) , 053507
Finite element modeling of indentation-induced superelastic effect using a three-dimensional constitutive model for shape memory materials with plasticity
Indentation-induced shape memory and superelastic effects are recently discovered thermo-mechanical behaviors that may find important applications in many areas of science and engineering. Theoretical understanding of these phenomena is challenging because both martensitic phase transformation and slip plasticity exist under complex contact loading conditions. In this paper, we develop a three-dimensional constitutive model of shape memory alloys with plasticity. Spherical indentation-induced superelasticity in a NiTi shape memory alloy was simulated and compared to experimental results on load-displacement curves and recovery ratios. We show that shallow indents have complete recovery upon unloading, where the size of the phase transformation region is about two times the contact radius. Deep indents have only partial recovery when plastic deformation becomes more prevalent in the indent-affected zone.
- 1 January 2006
- Published by Springer Nature in MRS Proceedings
- Vol. 979
Two-way Shape Memory Surfaces
Recently, we discovered that a two-way shape memory effect can be realized on NiTi shape memory alloy surfaces by spherical indentation. Either thermomechanical cycling or slip-plastic deformation under contact loading conditions is effective in inducing reversible indent depth changes: deeper indents in the low temperature martensitic phase and shallower indents in the high temperature austenitic phase [1, 2]. By planarization of these spherical indents to restore a flat surface, circular reversible surface protrusions appear upon heating and disappear upon cooling. Nano-protrusions are also realized in sputter deposited NiTi thin films. Furthermore, two-way reversible line protrusions are made by planarizing scratch tracks on a NiTi shape memory alloy. Shape memory surfaces can be exploited for a wide range of potential applications, including information storage, optical devices, and smart tribological surfaces.
- 1 January 2006
- Published by Springer Nature in MRS Proceedings
- Vol. 979
Two-way Shape Memory Surfaces
Recently, we discovered that a two-way shape memory effect can be realized on NiTi shape memory alloy surfaces by spherical indentation. Either thermomechanical cycling or slip-plastic deformation under contact loading conditions is effective in inducing reversible indent depth changes: deeper indents in the low temperature martensitic phase and shallower indents in the high temperature austenitic phase [1, 2]. By planarization of these spherical indents to restore a flat surface, circular reversible surface protrusions appear upon heating and disappear upon cooling. Nano-protrusions are also realized in sputter deposited NiTi thin films. Furthermore, two-way reversible line protrusions are made by planarizing scratch tracks on a NiTi shape memory alloy. Shape memory surfaces can be exploited for a wide range of potential applications, including information storage, optical devices, and smart tribological surfaces.
- 1 August 2005
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 98 (3) , 033505
Indentation stress dependence of the temperature range of microscopic superelastic behavior of nickel-titanium thin films
The microscopic superelastic behavior of thin-film NiTi is investigated by instrumented indentation experiments conducted at different temperatures. The indentation-induced superelastic effect is found to be persistent to about above the austenite transformation finish temperature . In contrast, the upper temperature where superelastic effect exists is only around plus in uniaxial tension and compression tests, beyond which the plasticity of the austenite phase overwhelms the transformation-induced superelasticity. By combining the Clausius-Clapeyron equation and spherical cavity model for indentation, we show that the high hydrostatic pressure under the indenter is capable of elevating the transformation temperatures and increase the upper temperature limit of indentation-induced superelastic behavior.- 1 August 2005
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 98 (3) , 033505
Indentation stress dependence of the temperature range of microscopic superelastic behavior of nickel-titanium thin films
The microscopic superelastic behavior of thin-film NiTi is investigated by instrumented indentation experiments conducted at different temperatures. The indentation-induced superelastic effect is found to be persistent to about above the austenite transformation finish temperature . In contrast, the upper temperature where superelastic effect exists is only around plus in uniaxial tension and compression tests, beyond which the plasticity of the austenite phase overwhelms the transformation-induced superelasticity. By combining the Clausius-Clapeyron equation and spherical cavity model for indentation, we show that the high hydrostatic pressure under the indenter is capable of elevating the transformation temperatures and increase the upper temperature limit of indentation-induced superelastic behavior.