Xabier Sarasola
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Xabier Sarasola has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:
- Pierluigi Bruzzone
Cole Polytechnique Fdrale de Lausanne (EPFL), Swiss Plasma Center (SPC), Villigen PSI, Switzerland
20 shared publications - Kamil Sedlak
Cole Polytechnique Fdrale de Lausanne (EPFL), Swiss Plasma Center (SPC), Villigen PSI, Switzerland
19 shared publications - Luigi Muzzi
NUC department, ENEA, Frascati, Italy
6 shared publications - Valentina Corato
ENEA, Frascati, Italy
6 shared publications - Soren Prestemon
Lawrence Berkeley National Laboratory
5 shared publications - Antonio della Corte
ENEA, Frascati, Italy
4 shared publications
Latest Publications
- 1 December 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (9) , 4203815
Preliminary Design of the PF-Coil System for the EU-DEMO LAR Baseline
- 1 December 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (9) , 4203815
Preliminary Design of the PF-Coil System for the EU-DEMO LAR Baseline
- Open Access
- 21 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Erratum to: Future Circular Collider Feasibility Study Report
- 21 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Open AccessErratum to: Future Circular Collider Feasibility Study Report
- 3 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-6
Conductor and Winding Pack Design for DEMO LAR TF Coil Based on React&Wind Nb 3 Sn Flat Cable
A new EUROfusion DEMO baseline, defining the size and main parameters for the possible future European tokamak, has been released in 2024. Compared to the previous DEMO baseline from 2018, the machine size and performance have been slightly reduced, relaxing the requirements on the magnet design. This gives us an opportunity to review the design of the DEMO toroidal-field coils, to optimize the cross-sections of all winding-pack components, and to investigate the impact of the reduced performance requirements on the TF coil radial build and manufacturing costs. Two main coil designs are under investigation by the DEMO magnet team. One of them is ITER-like, applying the existing technology to the scaled-up DEMO coils. In our contribution we explore the second option of the coil design based on flat rectangular react&wind Nb3Sn cable enclosed in a steel jacket. The winding pack is graded, layer wound and without radial plates, leading to a cost-efficient design both in the required amount of material, as well as in the simplifications in the conductor and coil assembly.
- 3 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-6
Conductor and Winding Pack Design for DEMO LAR TF Coil Based on React&Wind Nb 3 Sn Flat Cable
A new EUROfusion DEMO baseline, defining the size and main parameters for the possible future European tokamak, has been released in 2024. Compared to the previous DEMO baseline from 2018, the machine size and performance have been slightly reduced, relaxing the requirements on the magnet design. This gives us an opportunity to review the design of the DEMO toroidal-field coils, to optimize the cross-sections of all winding-pack components, and to investigate the impact of the reduced performance requirements on the TF coil radial build and manufacturing costs. Two main coil designs are under investigation by the DEMO magnet team. One of them is ITER-like, applying the existing technology to the scaled-up DEMO coils. In our contribution we explore the second option of the coil design based on flat rectangular react&wind Nb3Sn cable enclosed in a steel jacket. The winding pack is graded, layer wound and without radial plates, leading to a cost-efficient design both in the required amount of material, as well as in the simplifications in the conductor and coil assembly.
- Top Cited PapersOpen Access
- 24 December 2025
- Published by Springer Nature in The European Physical Journal C
- Vol. 85 (12)
Future Circular Collider Feasibility Study Report
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
- 24 December 2025
- Published by Springer Nature in The European Physical Journal C
- Vol. 85 (12)
Top Cited PapersOpen AccessFuture Circular Collider Feasibility Study Report
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
A Parametric Workflow for the Design of High-Field Magnets for Optimized Stellarators
A major challenge for stellarators are the complex non-planar 3D coil shapes required to create the necessary magnetic field to confine the plasma. This work presents a parametric approach for the magneto-static and mechanical analysis of stellarator coils, considering $\mathrm{N}{{\mathrm{b}}_3}\text{Sn}$ coils with a 12 T peak B-field. In addition, a thermal-hydraulic simulation for the winding pack is performed, which includes the steady state analysis and the determination of the hotspot temperature during a quench. Given the existence of various stellarator configurations, the developed parametric tool for magnetic design will significantly accelerate the overall stellarator design process and its evaluation. The parametric tool has been applied to the HELIAS 5-B configuration which serves as case-study and is using LTS magnets. For HELIAS 5-B, the peak B-field is ∼12 T, with hotspot temperature and margin well within the limits, and the mechanical analysis showing the peak stress only exceeds the allowable limits locally and strain values remain below degradation threshold Nb3Sn.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
A Parametric Workflow for the Design of High-Field Magnets for Optimized Stellarators
A major challenge for stellarators are the complex non-planar 3D coil shapes required to create the necessary magnetic field to confine the plasma. This work presents a parametric approach for the magneto-static and mechanical analysis of stellarator coils, considering $\mathrm{N}{{\mathrm{b}}_3}\text{Sn}$ coils with a 12 T peak B-field. In addition, a thermal-hydraulic simulation for the winding pack is performed, which includes the steady state analysis and the determination of the hotspot temperature during a quench. Given the existence of various stellarator configurations, the developed parametric tool for magnetic design will significantly accelerate the overall stellarator design process and its evaluation. The parametric tool has been applied to the HELIAS 5-B configuration which serves as case-study and is using LTS magnets. For HELIAS 5-B, the peak B-field is ∼12 T, with hotspot temperature and margin well within the limits, and the mechanical analysis showing the peak stress only exceeds the allowable limits locally and strain values remain below degradation threshold Nb3Sn.
- 9 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Conceptual Design of the EDIPO 2 Magnet
The SULTAN test facility has been pivotal in qualifying forced-flow conductors in the last three decades. However, the rising demand for conductors for high-field magnets calls for a test facility able to provide a background magnetic field beyond the 11 T offered by SULTAN. In this context, the Swiss Plasma Center proposes an upgrade of the EDIPO test facility (EDIPO 2), which will provide a 15 T background field within a 144 × 144 $\text{mm}^{2}$ aperture and allow variable-temperature, high-current testing of superconductor samples. The proposed magnet layout features two key innovations: the use of a two-stage $\text{Nb}_{3}\text{Sn}$ cable to increase the operating current and reduce the magnet inductance, and the exclusive use of planar racetrack coils to generate the required field, simplifying manufacturing and assembly. The magnet design is justified with detailed 3D magneto-static, mechanical, and quench protection analyses.
- 9 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Conceptual Design of the EDIPO 2 Magnet
The SULTAN test facility has been pivotal in qualifying forced-flow conductors in the last three decades. However, the rising demand for conductors for high-field magnets calls for a test facility able to provide a background magnetic field beyond the 11 T offered by SULTAN. In this context, the Swiss Plasma Center proposes an upgrade of the EDIPO test facility (EDIPO 2), which will provide a 15 T background field within a 144 × 144 $\text{mm}^{2}$ aperture and allow variable-temperature, high-current testing of superconductor samples. The proposed magnet layout features two key innovations: the use of a two-stage $\text{Nb}_{3}\text{Sn}$ cable to increase the operating current and reduce the magnet inductance, and the exclusive use of planar racetrack coils to generate the required field, simplifying manufacturing and assembly. The magnet design is justified with detailed 3D magneto-static, mechanical, and quench protection analyses.
- 9 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Nitronic 50 Steel as a Structural Material for EU-DEMO's Toroidal Field Coils
We report the results of an exploratory design study for Nitronic 50 (N50) Toroidal Field (TF) coils for the EU-DEMO fusion power plant. N50 is a super-austenitic steel that has a yield stress (${{\sigma }_y})$ of up to 1500 MPa at 4 K, 50% higher than the conventional structural steels (e.g., 316LN) that have been considered for EU-DEMO so far. 2D mechanical analyses have been performed on the inner legs of 30 different layer-wound and graded TF coil designs from the Swiss Plasma Center (SPC), with different current per turn's (${{I}_t}$’s) and discharge time constants (${{\tau }_d}$’s) while maintaining the same ampere-turns in the Winding Pack (WP). We show that there is a wide range of ${{I}_t}$ and ${{\tau }_d}$ parameter space that allows N50 coils with radial thicknesses of <1100 mm, using materials that are available today. We also show that material and manufacturing development programmes for the insulation and N50 coil case would be needed to unlock all the radial space reductions on offer from N50. If such programmes were successful, then thicknesses as low as 710 mm may be possible with N50 (∼20% lower than the thinnest possible 316LN design). The designs that we have found fit comfortably in the 1400 mm space envelope assigned to the TF coil inner leg in the 2018 EU-DEMO magnet baseline design.
- 9 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Nitronic 50 Steel as a Structural Material for EU-DEMO's Toroidal Field Coils
We report the results of an exploratory design study for Nitronic 50 (N50) Toroidal Field (TF) coils for the EU-DEMO fusion power plant. N50 is a super-austenitic steel that has a yield stress (${{\sigma }_y})$ of up to 1500 MPa at 4 K, 50% higher than the conventional structural steels (e.g., 316LN) that have been considered for EU-DEMO so far. 2D mechanical analyses have been performed on the inner legs of 30 different layer-wound and graded TF coil designs from the Swiss Plasma Center (SPC), with different current per turn's (${{I}_t}$’s) and discharge time constants (${{\tau }_d}$’s) while maintaining the same ampere-turns in the Winding Pack (WP). We show that there is a wide range of ${{I}_t}$ and ${{\tau }_d}$ parameter space that allows N50 coils with radial thicknesses of <1100 mm, using materials that are available today. We also show that material and manufacturing development programmes for the insulation and N50 coil case would be needed to unlock all the radial space reductions on offer from N50. If such programmes were successful, then thicknesses as low as 710 mm may be possible with N50 (∼20% lower than the thinnest possible 316LN design). The designs that we have found fit comfortably in the 1400 mm space envelope assigned to the TF coil inner leg in the 2018 EU-DEMO magnet baseline design.
- 18 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Numerical Analysis of Non-Insulated DEMO TF Coils
The design of small solenoids without/with-partial insulation (PI) among turns or layers has been proven to grant higher thermal stability than for standard insulated cases. This technology also implies higher safety standards, by e.g. reducing the coil voltages. At the same time, a passive/simpler quench protection systems (QPS) becomes a concrete opportunity. Besides, this approach did not guarantee yet the same advantages on large-scale magnets, as the redistribution of currents and heat after quench is not yet fully understood. The possibility for full internal energy dissipation of the Nb $_{3}$ Sn EUROfusion DEMO toroidal field (TF) coil is here firstly discussed analytically and by means of circuital simulations, highlighting the possible final temperatures for internal dump and resistance ranges for the desired bridge resistors of such a PI coil. This study presents a new 3-D MATLAB numerical model, developed for simulating in a fast fashion charge and quench of PI-DEMO TF coils, by coupling both electrical and thermal physics. The code structure is explained as well as its first benchmarks. A parametric study—where only turn-turn localized bridges are considered—is presented, showing 1–100 V highest coil voltage and very high final temperatures after quenches. Consequences and possible improvements are finally discussed.
- 18 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Numerical Analysis of Non-Insulated DEMO TF Coils
The design of small solenoids without/with-partial insulation (PI) among turns or layers has been proven to grant higher thermal stability than for standard insulated cases. This technology also implies higher safety standards, by e.g. reducing the coil voltages. At the same time, a passive/simpler quench protection systems (QPS) becomes a concrete opportunity. Besides, this approach did not guarantee yet the same advantages on large-scale magnets, as the redistribution of currents and heat after quench is not yet fully understood. The possibility for full internal energy dissipation of the Nb $_{3}$ Sn EUROfusion DEMO toroidal field (TF) coil is here firstly discussed analytically and by means of circuital simulations, highlighting the possible final temperatures for internal dump and resistance ranges for the desired bridge resistors of such a PI coil. This study presents a new 3-D MATLAB numerical model, developed for simulating in a fast fashion charge and quench of PI-DEMO TF coils, by coupling both electrical and thermal physics. The code structure is explained as well as its first benchmarks. A parametric study—where only turn-turn localized bridges are considered—is presented, showing 1–100 V highest coil voltage and very high final temperatures after quenches. Consequences and possible improvements are finally discussed.
- Open Access
- 28 May 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 204
Re-design of EU DEMO with a low aspect ratio
- 28 May 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 204
Open AccessRe-design of EU DEMO with a low aspect ratio