Arnaud Laurent
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arnaud Laurent has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
- Katja Fennel
Department of Oceanography Dalhousie University Halifax NS Canada
65 shared publications - Bin Wang
Department of Oceanography Dalhousie University Halifax NS Canada
17 shared publications - Dariia Atamanchuk
Dalhousie University, 1355 Oxford St, Halifax, B3H 4R2, Canada [CA
15 shared publications - Kyoko Ohashi
Department of Oceanography, Dalhousie University, Halifax, NS B3H 4R2 Canada
12 shared publications - Christoph Renkl
University of Bonn Bonn Germany
11 shared publications Eric Oliver
Department of Oceanography, Dalhousie University, Halifax, NS, B3H 4R2, Canada
11 shared publications
Latest Publications
- Open Access
- 13 April 2026
- Published by Wiley
Tracer release experiments in Halifax Harbour and implications for coastal ocean alkalinity enhancement
- 13 April 2026
- Published by Wiley
Open AccessTracer release experiments in Halifax Harbour and implications for coastal ocean alkalinity enhancement
- Open Access
- 1 April 2026
- Published by IOP Publishing in Environmental Research Letters
- Vol. 21 (8) , 084010
Prospective site-specific life cycle assessment of ocean alkalinity enhancement
Ocean alkalinity enhancement (OAE) is a promising marine carbon dioxide removal (CDR) option, but its net climate benefit and wider environmental implications depend strongly on where, and how it is implemented and on decarbonized energy and material supply chains. We develop a prospective, site-specific, life cycle assessment (pLCA) that couples a field trials’ validated high-resolution ocean biogeochemical model with LCA for five OAE pathways deployed via wastewater outfalls in Halifax Harbor, Canada: three on magnesium hydroxide (two from serpentinite, via ammonium sulfate (AS) and HCl leaching (HCl), one from bischofite brine (BIS)) and two on sodium hydroxide (from industrial-grade sodium chloride (NaOHs) and seawater desalination brine hydroxide (NaOHb)). Using the functional unit of removing and permanently storing 1 t of atmospheric CO₂, we compare present-day conditions with a 2050 scenario and quantify eighteen ReCiPe 2016 midpoint impacts. Present-day results show little to no net climate benefit: net climate effects range from −0.09 to +0.71 t CO2-equivalent (CO2e) per t CO₂ removed, with fossil electricity and heat supply dominating the impact. By 2050, all pathways are net removers with uptake efficiencies of 81–95% as energy supply decarbonizes. BIS performs best in sixteen of eighteen impact categories, whereas NaOHs and AS are consistently worst across most categories. As energy decarbonizes, burdens shift from fossil fuel combustion to materials, metals, and related mining (especially copper), chemicals, and biofuels production for feedstock transport. The analysis shows that robust OAE assessment requires site-specific CO₂ uptake efficiencies, prospective supply-chain representation, and multi-criteria evaluation rather than focusing only on net CO₂ removal, because climate-attractive pathways can carry substantial burdens in (eco)toxicity, resource depletion, or other impact categories. The proposed coupling of a regional ocean model with pLCA provides a transferable template to evaluate OAE and other marine CDR options in CDR portfolios.
- 1 April 2026
- Published by IOP Publishing in Environmental Research Letters
- Vol. 21 (8) , 084010
Open AccessProspective site-specific life cycle assessment of ocean alkalinity enhancement
Ocean alkalinity enhancement (OAE) is a promising marine carbon dioxide removal (CDR) option, but its net climate benefit and wider environmental implications depend strongly on where, and how it is implemented and on decarbonized energy and material supply chains. We develop a prospective, site-specific, life cycle assessment (pLCA) that couples a field trials’ validated high-resolution ocean biogeochemical model with LCA for five OAE pathways deployed via wastewater outfalls in Halifax Harbor, Canada: three on magnesium hydroxide (two from serpentinite, via ammonium sulfate (AS) and HCl leaching (HCl), one from bischofite brine (BIS)) and two on sodium hydroxide (from industrial-grade sodium chloride (NaOHs) and seawater desalination brine hydroxide (NaOHb)). Using the functional unit of removing and permanently storing 1 t of atmospheric CO₂, we compare present-day conditions with a 2050 scenario and quantify eighteen ReCiPe 2016 midpoint impacts. Present-day results show little to no net climate benefit: net climate effects range from −0.09 to +0.71 t CO2-equivalent (CO2e) per t CO₂ removed, with fossil electricity and heat supply dominating the impact. By 2050, all pathways are net removers with uptake efficiencies of 81–95% as energy supply decarbonizes. BIS performs best in sixteen of eighteen impact categories, whereas NaOHs and AS are consistently worst across most categories. As energy decarbonizes, burdens shift from fossil fuel combustion to materials, metals, and related mining (especially copper), chemicals, and biofuels production for feedstock transport. The analysis shows that robust OAE assessment requires site-specific CO₂ uptake efficiencies, prospective supply-chain representation, and multi-criteria evaluation rather than focusing only on net CO₂ removal, because climate-attractive pathways can carry substantial burdens in (eco)toxicity, resource depletion, or other impact categories. The proposed coupling of a regional ocean model with pLCA provides a transferable template to evaluate OAE and other marine CDR options in CDR portfolios.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Coastal alkalinity addition within safe environmental thresholds: numerical experiments in Halifax Harbour and surrounding areas (Canada)
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials (feedstock), is an emerging abiotic marine technology for marine carbon dioxide removal that could increase the storage of anthropogenic carbon in the ocean. Alkaline feedstock may, in theory, be released at any location in the surface ocean, but the use of pre-existing coastal infrastructures (e.g., sewage outfalls, cooling pipes) is cost efficient and lowers the emissions associated with the transport of feedstock. Release at these locations is regulated and needs to occur within safe environmental thresholds. It is therefore essential to understand how point source feedstock release alters the carbonate system to 1) maximize dosing while 2) ensuring the resulting perturbations remain within the safe zone of carbonate system parameters. Influencing factors may be the dosing level, the type of feedstock, pipe design and proximity of neighboring pipes, the background state of the carbonate system, and local circulation. Given the spatial distribution of some of these factors, their importance may vary regionally. Here, we use a coupled physical-biogeochemical model that is specifically designed for coastal OAE research to investigate where and how dosing can breach environmental thresholds in the Halifax Harbour and surrounding coastal areas. Simulations with various dosing rates and release sites are carried out and their results analyzed with respect to environmental thresholds (pH>9, precipitation risk). Benthic exposure to feedstock (particulate phase) is also considered.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessCoastal alkalinity addition within safe environmental thresholds: numerical experiments in Halifax Harbour and surrounding areas (Canada)
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials (feedstock), is an emerging abiotic marine technology for marine carbon dioxide removal that could increase the storage of anthropogenic carbon in the ocean. Alkaline feedstock may, in theory, be released at any location in the surface ocean, but the use of pre-existing coastal infrastructures (e.g., sewage outfalls, cooling pipes) is cost efficient and lowers the emissions associated with the transport of feedstock. Release at these locations is regulated and needs to occur within safe environmental thresholds. It is therefore essential to understand how point source feedstock release alters the carbonate system to 1) maximize dosing while 2) ensuring the resulting perturbations remain within the safe zone of carbonate system parameters. Influencing factors may be the dosing level, the type of feedstock, pipe design and proximity of neighboring pipes, the background state of the carbonate system, and local circulation. Given the spatial distribution of some of these factors, their importance may vary regionally. Here, we use a coupled physical-biogeochemical model that is specifically designed for coastal OAE research to investigate where and how dosing can breach environmental thresholds in the Halifax Harbour and surrounding coastal areas. Simulations with various dosing rates and release sites are carried out and their results analyzed with respect to environmental thresholds (pH>9, precipitation risk). Benthic exposure to feedstock (particulate phase) is also considered.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Physical controls on alkalinity variability in Halifax Harbour: The roles of wind and tides
Ocean Alkalinity Enhancement (OAE) is a promising method for marine carbon dioxide removal. By artificially increasing ocean alkalinity, OAE triggers chemical reactions within the carbonate system that reduce oceanic pCO₂ levels, thereby inducing an uptake of atmospheric CO₂ by the ocean. However, as alkalinity concentrations at the point of release can reach high levels, alkalinity addition is limited for environmental safety to ensure pH < 9. Pronounced alkalinity variability was observed in the Halifax Harbour (Canada), an operational OAE site since 2023. This variability is characterized by alternating high and low values with substantial differences in magnitude. Understanding the processes that generate this variability is essential for controlling its intensity and advancing toward optimized dynamic dosing strategies to maximize dosing while remaining within safe regulatory limits.Observations of carbonate system parameters collected during and outside dosing periods in the Halifax Harbour provide a unique dataset to determine which factors control the occurrence and magnitude of the alkalinity variability. We combine in situ measurements with numerical modeling using the Regional Ocean Modeling System (ROMS), customized for the Halifax Harbour and implemented with a nested grid configuration (50–900 m horizontal resolution). We use a series of numerical simulations under different wind scenarios to examine the coupled effects of winds and tides on alkalinity dispersion.Our results show that the concentrations of added alkalinity are primarily controlled by tidal variability on daily and monthly timescales. Wind effects act as a secondary control, modulating tidal patterns and causing notable deviations, particularly during neap tides. Winds directed toward the open ocean enhance dispersion, whereas winds blowing into the basin tend to retain alkalinity near the release site, leading to higher local concentrations.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessPhysical controls on alkalinity variability in Halifax Harbour: The roles of wind and tides
Ocean Alkalinity Enhancement (OAE) is a promising method for marine carbon dioxide removal. By artificially increasing ocean alkalinity, OAE triggers chemical reactions within the carbonate system that reduce oceanic pCO₂ levels, thereby inducing an uptake of atmospheric CO₂ by the ocean. However, as alkalinity concentrations at the point of release can reach high levels, alkalinity addition is limited for environmental safety to ensure pH < 9. Pronounced alkalinity variability was observed in the Halifax Harbour (Canada), an operational OAE site since 2023. This variability is characterized by alternating high and low values with substantial differences in magnitude. Understanding the processes that generate this variability is essential for controlling its intensity and advancing toward optimized dynamic dosing strategies to maximize dosing while remaining within safe regulatory limits.Observations of carbonate system parameters collected during and outside dosing periods in the Halifax Harbour provide a unique dataset to determine which factors control the occurrence and magnitude of the alkalinity variability. We combine in situ measurements with numerical modeling using the Regional Ocean Modeling System (ROMS), customized for the Halifax Harbour and implemented with a nested grid configuration (50–900 m horizontal resolution). We use a series of numerical simulations under different wind scenarios to examine the coupled effects of winds and tides on alkalinity dispersion.Our results show that the concentrations of added alkalinity are primarily controlled by tidal variability on daily and monthly timescales. Wind effects act as a secondary control, modulating tidal patterns and causing notable deviations, particularly during neap tides. Winds directed toward the open ocean enhance dispersion, whereas winds blowing into the basin tend to retain alkalinity near the release site, leading to higher local concentrations.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Is the removal of atmospheric CO2 via Ocean Alkalinity Enhancement feasible for climate mitigation?
Ocean alkalinity enhancement (OAE) is an approach for the deliberate removal of CO2 from the atmosphere. This emerging technology relies on human intervention to increase the alkalinity of seawater which, in turn, induces a net flux of atmospheric CO2 into the ocean. OAE is considered comparatively scalable and promises to deliver durable carbon removal but, to the best of our knowledge, a detailed feasibility study has not been undertaken. Key aspects to consider in such an analysis are: 1) how much alkalinity can be added at coastal outfall sites before breaching regulatory and geochemical constraints on seawater pH and carbonate saturation state, and 2) whether delivery of alkalinity can be achieved with a sufficiently low carbon footprint. We present results addressing both questions using the coast of Nova Scotia in eastern Canada as a test case. The first operational deployment of OAE started in Halifax Harbour, Nova Scotia, in October 2023. By October 2025, the climate-tech company Planetary Technologies had retired carbon credits for the removal of 1,800 tons of CO2. We ask what it would take to scale up from an annual net carbon removal of 1000 t/y of CO2 to 1 Gt/y, which is commonly considered the threshold for a carbon removal technology to be scalable. Specifically, we analyze the maximum CDR capacity of individual outfalls since this will meaningfully influence deployment strategies for OAE. Our results are based on a suite of simulations using a coupled circulation-biogeochemical model for Halifax Harbour that has been used to support OAE field work and verification of OAE credits and a prospective Life Cycle Analysis conducted for this site.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessIs the removal of atmospheric CO2 via Ocean Alkalinity Enhancement feasible for climate mitigation?
Ocean alkalinity enhancement (OAE) is an approach for the deliberate removal of CO2 from the atmosphere. This emerging technology relies on human intervention to increase the alkalinity of seawater which, in turn, induces a net flux of atmospheric CO2 into the ocean. OAE is considered comparatively scalable and promises to deliver durable carbon removal but, to the best of our knowledge, a detailed feasibility study has not been undertaken. Key aspects to consider in such an analysis are: 1) how much alkalinity can be added at coastal outfall sites before breaching regulatory and geochemical constraints on seawater pH and carbonate saturation state, and 2) whether delivery of alkalinity can be achieved with a sufficiently low carbon footprint. We present results addressing both questions using the coast of Nova Scotia in eastern Canada as a test case. The first operational deployment of OAE started in Halifax Harbour, Nova Scotia, in October 2023. By October 2025, the climate-tech company Planetary Technologies had retired carbon credits for the removal of 1,800 tons of CO2. We ask what it would take to scale up from an annual net carbon removal of 1000 t/y of CO2 to 1 Gt/y, which is commonly considered the threshold for a carbon removal technology to be scalable. Specifically, we analyze the maximum CDR capacity of individual outfalls since this will meaningfully influence deployment strategies for OAE. Our results are based on a suite of simulations using a coupled circulation-biogeochemical model for Halifax Harbour that has been used to support OAE field work and verification of OAE credits and a prospective Life Cycle Analysis conducted for this site.
- Open Access
- 7 January 2026
- Published by Copernicus GmbH in Biogeosciences
- Vol. 23 (1) , 115-135
A high-resolution nested model to study the effects of alkalinity additions in Halifax Harbour, a mid-latitude coastal fjord
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model's capabilities for assessing the effects of OAE at this coastal site. We found that release locations had a strong effect on the outcome of the addition, whereas feedstock types influenced the distribution of the signal. Up to 69 % of the net CO2 uptake was realized within the model domain, most of it inside the harbour. These results stress the importance of operational design, as well as the use of high-resolution regional models when quantifying additionality.
- 7 January 2026
- Published by Copernicus GmbH in Biogeosciences
- Vol. 23 (1) , 115-135
Open AccessA high-resolution nested model to study the effects of alkalinity additions in Halifax Harbour, a mid-latitude coastal fjord
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model's capabilities for assessing the effects of OAE at this coastal site. We found that release locations had a strong effect on the outcome of the addition, whereas feedstock types influenced the distribution of the signal. Up to 69 % of the net CO2 uptake was realized within the model domain, most of it inside the harbour. These results stress the importance of operational design, as well as the use of high-resolution regional models when quantifying additionality.
- Open Access
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-37
Reply on RC2
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model’s capabilities for assessing the effects of OAE at this coastal site.
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-37
Open AccessReply on RC2
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model’s capabilities for assessing the effects of OAE at this coastal site.
- Open Access
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-37
Reply on RC3
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model’s capabilities for assessing the effects of OAE at this coastal site.
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-37
Open AccessReply on RC3
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model’s capabilities for assessing the effects of OAE at this coastal site.
- Open Access
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-37
Reply on RC1
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model’s capabilities for assessing the effects of OAE at this coastal site.
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-37
Open AccessReply on RC1
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model’s capabilities for assessing the effects of OAE at this coastal site.
- Open Access
- 18 September 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-37
Comment on egusphere-2025-3361
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model’s capabilities for assessing the effects of OAE at this coastal site.
- 18 September 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-37
Open AccessComment on egusphere-2025-3361
Surface ocean alkalinity enhancement (OAE), through the release of alkaline materials, is an emerging marine carbon dioxide removal technology that could increase the storage of anthropogenic carbon in the ocean. Observations collected during recent and on-going field trials will provide important information on the feasibility and effects of alkalinity additions on carbon cycling and study ecological responses. However, given the scales involved (24/7 continuous addition, meters to hundreds/thousands of kilometers and minutes to months for alkalinity dispersion) observations, even with the use of autonomous platforms, will remain inherently sparse and limited. Alone, they cannot provide a comprehensive quantification of the effects of OAE on the carbonate system, and ultimately of the net air-sea CO2 fluxes. Numerical models, informed and validated by field observations, are therefore essential to OAE deployments and the measurement, reporting, and verification (MRV) of any resulting carbon uptake. They can help guide fieldwork design, including optimal design of measurement monitoring networks, provide forecasts of the ocean state, simulate the effects of alkalinity additions on the seawater carbonate system, and allow one to quantify net CO2 uptake. Here we describe a coupled physical-biogeochemical model that is specifically designed for coastal OAE. The model is an implementation of the Regional Ocean Modelling System (ROMS) in a nested grid configuration with increasing spatial resolution from the Scotian Shelf to Halifax Harbour (coastal fjord, eastern Canada), a current test site for operational alkalinity addition. The biogeochemical model simulates oxygen dynamics, carbonate system processes (including air-sea gas exchange), and feedstock properties (dissolution, sinking). We present a multi-year hindcast validated against the long-term weekly time series available for a long-term monitoring station at the deepest part of Halifax Harbour, as well as alkalinity addition simulations at various locations inside and outside the harbour to show the model’s capabilities for assessing the effects of OAE at this coastal site.