Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Benoit Belleville has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mechanical and Physical Performance of Particleboards from Wood Residues: Effects of Raw Material Characteristics and Manufacturing Parameters

    by Isuri Tamura Amarasinghe, Yi Qian, Tharaka Gunawardena, Priyan Mendis, Benoit Belleville

    The utilisation of wood-processing residues in particleboard production provides an opportunity to improve resource efficiency. However, limited research has systematically examined the combined influence of material characteristics and fabrication parameters on panel performance. This study investigates the joint influence of particle mix, resin content and processing method on the performance of particleboards manufactured from radiata pine (Pinus radiata) wood residues. Single-layer panels were fabricated using coarse particles, thin particles, and a thin–fine particle blend at three resin contents via dry and water-conditioned fabrication methods, targeting a constant density of 600 kg/m3. Panels were evaluated for modulus of rupture (MOR), modulus of elasticity (MOE), thickness swelling (TS) and water absorption (WA). The results revealed statistically significant interaction effects among the factors, with particle geometry primarily governing bending performance, and fabrication route exerting the strongest influence on dimensional stability. Thin-particle panels exhibited the highest bending performance, with the 12 wt.% dry-fabrication method achieving an average MOE of 1862 MPa and MOR of 14.65 MPa. In contrast, fine-particle incorporation reduced bending performance but improved dimensional stability, with micro-CT analysis showing lower porosity and smaller pore features in the selected fines-containing panel, reaching a minimum porosity of 3.6%. Overall, the findings demonstrate that coordinated optimisation of material composition and processing parameters can enhance the performance of residue-based particleboards.

  • Open Access

    Hybrid effects on processing recovery, wood quality, and structural performance of engineered Eucalyptus pellita products

    by Oluwatosin Esther Falade, Benoit Belleville, Antanas Spokevicius, Barbara Ozarska, Gerd Bossinger, Umar Ibrahim, Johannes Fehrmann, Bala Thumma

    Eucalyptus pellita is cultivated for pulpwood in tropical and subtropical regions but remains underutilised for structural applications, particularly in dry tropical environments. Compared to well-studied species such as Eucalyptus grandis and Eucalyptus globulus , its potential in engineered wood products is poorly understood. As plantation industries seek to diversify products and increase wood value, understanding the structural suitability of E. pellita hybrids is critical. This study evaluated the performance of E. pellita and its F1 and backcross hybrids across two dry tropical sites, spanning log quality, product recovery, structural properties, and genetic associations. Billets were assessed for form, diameter, and defects. Sawing and peeling trials quantified recovery rates and defects. Laminated veneer lumber (LVL) was fabricated from hybrid veneers and tested for density, modulus of elasticity (MOE), modulus of rupture (MOR), and bond quality. The E. pellita x Eucalyptus brassiana hybrid achieved highest recoveries among the materials tested (sawn board recovery up to 49.2%; green veneer recovery up to 83.6%). The highest-performing LVL (layup 3) from this hybrid achieved an MOE of 18.8 GPa and MOR of 139 MPa. Genetic analysis using a targeted panel of ~ 5500 single nucleotide polymorphism (SNP) markers identified significant associations above the –log₁₀( p ) = 1.30 threshold for end split (SNP1358), knot diameter (SNP3201), and heartwood proportion (SNP2187). Although statistical power was limited by sample size, these findings highlight the potential of E. pellita hybrids for structural applications and demonstrate the value of integrating phenotypic and molecular data to support tropical hardwood breeding and utilisation strategies.


  • Open Access

    Life Cycle Analysis of Particleboard Made of Corn Stalk and Citric Acid at Laboratory Scale

    by Lilik Astari, Robert H. Crawford, Kenji Umemura, Barbara Ozarska, Benoit Belleville

    Research on particleboard fabrication using non-wood biomass as an alternative to wood particles is steadily increasing due to environmental awareness. Information on the life cycle assessment (LCA) of particleboards made of non-wood biomass and non-formaldehyde adhesives is scarce. This research presents the life cycle assessment (LCA) of particleboard fabrication made from corn stalk particles and citric acid in Indonesia and Australia at laboratory scale. Cradle-to-gate boundaries were applied with the fabrication steps involving particle preparation, citric acid solution preparation, the mixing of adhesive and particle, a hot-pressing process, and a final production process. The functional unit is a particleboard with 282 mm × 208 mm × 12 mm dimensions. The life cycle inventory data were obtained from particleboard sheet fabrication on a lab scale. Southeast Asia (Indonesia) and Southern Australia (Victoria) conditions were adopted for geographical background processes, using data from the Ecoinvent V.3.10 database. LCA calculation was conducted using the OpenLCA V.2.1.1 software. The environmental impacts were calculated using the ReCiPe Midpoint 2016 methodology. The results showed that oven drying and pre-treatment drying contributed the most to energy consumption in both regions, accounting for 97.14% at the Indonesian site and 96.49% at the Australian site. The environmental impacts in the Australian context showed higher values in 10 out of 18 categories. The five highest environmental impacts were terrestrial ecotoxicity (5.50 × 102 kg 1,4-DCB in Indonesia, 6.37 × 102 kg 1,4-DCB in Australia), global warming (2.72 × 102 kg CO2 eq in Indonesia, 2.49 × 102 kg CO2 eq in Australia), human non-carcinogenic toxicity (4.65 × 102 kg 1,4-DCB in Indonesia, 4.18 × 102 kg 1,4-DCB in Australia), water consumption (2.50 × 102 m3 in Indonesia, 4.62 × 102 m3 in Australia), and fossil resource scarcity (7.34 × 101 kg oil eq in Indonesia, 6.86 × 101 kg oil eq in Australia). Implementing solar drying and sourcing raw materials from farms closer to the production site could reduce energy consumption by up to 48.57% in Indonesia and 48.24% in Australia. These findings underscore the high energy demand of drying and the importance of site selection in particleboard production.

  • Open Access

    SNP-Based Genetic Analysis of Dimensional Stability and Wood Density in Eucalyptus pellita F.Muell. and Hybrids

    by Oluwatosin Esther Falade, Benoit Belleville, Antanas Spokevicius, Barbara Ozarska, Gerd Bossinger, Listya Mustika Dewi, Umar Ibrahim, Bala Thumma

    Dimensional stability is a key trait for structural wood applications such as flooring, yet its genetic basis in Eucalyptus pellita F.Muell. and its hybrids remain poorly understood. Addressing this gap is essential for improving processing efficiency and product quality through targeted breeding. This study assessed variation in shrinkage and density, their relationships with growth and chemical traits, and associated genetic markers. Wood samples from E. pellita, E. pellita × E. urophylla S.T.Blake, and E. pellita × E. brassiana S.T.Blake were collected from two plantation sites in northern Australia. Radial and tangential shrinkage and density were measured alongside growth and chemical traits. SNP genotyping was conducted to identify markers linked to these physical properties. Significant differences were observed among hybrid types. E. pellita × E. urophylla recorded the lowest tangential unit shrinkage (0.06%), while E. pellita × E. brassiana had the highest basic density (651 kg/m3). Shrinkage and density showed moderate to strong correlations with growth and chemical traits. Several SNPs were associated with these properties; all were located in the intergenic region near Eucgr.A00211. Among these, only one SNP exceeded the −log10(p) significance threshold. These results provide early genetic insights and potential candidate markers for improving wood quality in Eucalyptus breeding programs. This exploratory study, constrained by a small sample size (n = 58), identifies putative SNPs for future validation in broader, multi-environment trials.


  • Open Access

    Effect of a thermo-mechanical densification process on selected properties of densified wood of Tasmanian oak and Eucalyptus nitens

    by Benoit Belleville, Kyra C. Wood, Johannes Fehrmann

    Regrowth Tasmanian oak and Eucalyptus nitens are fast-growing Australian plantation hardwoods widely cultivated in Tasmania. Despite their favourable physical and aesthetic properties, their relatively low density limits use to wood-chip production and minor interior applications. This study aimed to enhance the material properties of these species through thermo-mechanical densification. The effects of compression ratio, pressing time, and pressing temperature were evaluated on color change, set recovery (wet and dry), pull-off strength, and delamination. Eucalyptus nitens showed excellent color stability under all conditions (ΔE*ab < 5), while Tasmanian oak exhibited significant darkening at 175 °C (ΔE*ab 6.17–9.06). At 175 °C and 37% compression, E. nitens responded more strongly, achieving a mean wet-use set recovery of 0.0%, compared with 2.7% for Tasmanian oak. Both species showed significantly improved dimensional stability at 37% compression ratio compared to 25%. The highest F-values observed for Eucalyptus nitens and Tasmanian oak were 25.36 and 17.91, respectively. Increased compression also improved pull-off strength in both species, but in Tasmanian oak, extractive migration at 175 °C likely reduced coating adhesion. The densification process had minimal impact on bondability overall. However, a higher pressing temperature significantly reduced delamination in Tasmanian oak (P-value 0.031), while showing negligible effect in Eucalyptus nitens. The results suggest that both Eucalyptus nitens and Tasmanian oak species were stable following the densification process and would make the densified wood serviceable under conditions in which the EMC does not exceed 17% if unprotected. Statements and Declarations. All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by Benoit Belleville. The first draft of the manuscript was written by Benoit Belleville and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript. The authors have no relevant financial or non-financial interests to disclose. The authors have no competing interests to declare that are relevant to the content of this article. All authors certify that they have no affiliations with or involvement in any organization or entity with any financial interest or non-financial interest in the subject matter or materials discussed in this manuscript. The authors have no financial or proprietary interests in any material discussed in this article.


  • Open Access

    Innovation in Timber Processing—A Case Study on Low-Grade Resource Utilisation for High-Grade Timber Products

    by Sebastian Klein, Benoit Belleville, Giorgio Marfella, Rodney Keenan, Robert L. McGavin

    Native forest timber supplies are declining, and industry needs to do more with less to meet growing demand for wood products. An Australian-based, vertically integrated timber manufacturing business is commissioning a spindleless lathe to produce engineered wood products from small logs. The literature on innovation in timber manufacturing was found to generally focus on technical innovation, with relatively little use of market-oriented concepts and theory. This was particularly true in the Australian context. Using a market-oriented case study approach, this research assessed innovation in the business. It aimed to inform industry-wide innovation approaches to meet market demand in the face of timber supply challenges. Interviews were conducted with key personnel at the firm. Data and outputs were produced to facilitate comparison to existing research and conceptual frameworks. The business was found to empower key staff and willingly access knowledge, information and data from outside its corporate domain. It was also found to prioritise corporate goals outside of traditional goals of profit and competitive advantage. This was shown to increase willingness to try new things at the mill and increase the chances that new approaches would succeed. Thinking outside of the corporate domain was shown to allow access to resources that the firm could not otherwise count on. It is recommended that wood processing businesses seek to emulate this element of the case study, and that academia and the broader sector examine further the potential benefits of using enterprise and market-oriented lenses to better utilise available resources and maintain progress towards corporate goals.


  • Open Access

    Effect of a thermo-mechanical densification process on selected properties of densified wood of Tasmanian oak and Eucalyptus nitens

    by Benoit Belleville, Kyra C. Wood, Johannes Fehrmann

    Regrowth Tasmanian oak and Eucalyptus nitens are fast-growing Australian plantation hardwoods widely cultivated in Tasmania. Despite their favourable physical and aesthetic properties, their relatively low density limits use to wood-chip production and minor interior applications. This study aimed to enhance the material properties of these species through thermo-mechanical densification. The effects of compression ratio, pressing time, and pressing temperature were evaluated on color change, set recovery (wet and dry), pull-off strength, and delamination. Eucalyptus nitens showed excellent color stability under all conditions (ΔE*ab < 5), while Tasmanian oak exhibited significant darkening at 175°C (ΔE*ab 6.17–9.06). At 175°C and 37% compression, E. nitens responded more strongly, achieving a mean wet-use set recovery of 0.0%, compared with 2.7% for Tasmanian oak. Both species showed significantly improved dimensional stability at 37% compression ratio compared to 25%. The highest F-values observed for Eucalyptus nitens and Tasmanian oak were 25.36 and 17.91, respectively. Increased compression also improved pull-off strength in both species, but in Tasmanian oak, extractive migration at 175°C likely reduced coating adhesion. The densification process had minimal impact on bondability overall. However, a higher pressing temperature significantly reduced delamination in Tasmanian oak (P-value 0.031), while showing negligible effect in Eucalyptus nitens. The results suggest that both Eucalyptus nitens and Tasmanian oak species were stable following the densification process and would make the densified wood serviceable under conditions in which the EMC does not exceed 17% if unprotected.

  • Open Access

    Composite Panels from Wood Waste: A Detailed Review of Processes, Standards, and Applications

    by Isuri Tamura Amarasinghe, Yi Qian, Tharaka Gunawardena, Priyan Mendis, Benoit Belleville

    The global demand for sustainable building materials has fuelled research into composite panels from wood waste. Despite their potential, the widespread adoption of this practice is hindered by the absence of quality standards, inconsistent material properties, and uncertainties about durability and strength. This paper critically reviews existing standards, manufacturing processes, and the suitability of panels from wood waste. A systematic review is conducted to identify the influencing processes and parameters affecting panel performance, from waste collection to the finishing stages. The findings indicate that incorporating 10–30% of wood waste can enhance the mechanical and physical properties, with particularly improved hygroscopic properties and greater dimensional stability. By establishing comprehensive standards and optimizing manufacturing processes, wood waste-based panels can emerge as a viable and eco-friendly alternative. Furthermore, the potential for repeated recycling in a closed-loop process offers promising environmental benefits, though it necessitates balancing resource conservation with product quality. By addressing these challenges, wood waste-based panels can significantly contribute to environmental conservation and resource management.


  • Open Access

    Gluing characteristics of Papua New Guinea timber species for various non-structural applications

    by Benoit Belleville, Kilva Lancelot, Elaine Galore, Johannes Fehrmann, Barbara Ozarska

    Papua New Guinea (PNG) has abundant natural forest resources but there are many constraints which need to be addressed to support the development of competitive value-added wood industries. There is a need to develop knowledge and capacity in wood science and processing technologies which support successful domestic value-adding wood processing enterprises. A comprehensive testing program has been developed to assess the glue‐bond strength and performance of selected commercial PNG timber species in various climatic conditions to simulate service conditions in potential market destinations. Two criteria namely shear strength and wood failure have been used to determine if a species can meet the minimum requirements for either dry use or wet use applications. The performance of 24 different PNG commercial timber species has been assessed using a one-component cross-linking polyvinyl acetate emulsion adhesive. The bondability of the selected species has been carefully estimated considering the wood density and wood moisture content for the strength and durability in dry- and wet-use conditions. The testing results show that as the wood density as a wood property factor and moisture content as a service condition factor increase, high shear strength with high wood failure become more difficult to achieve consistently. The highest shear strength and wood failure results were achieved by softwood plantation species and low-density hardwood species. Based on the testing results, the selected species have been classified into bondability classes (bond very well, bond well, bond with difficulty, very difficult to bond).


  • Open Access

    Influence of particle granulometry and panel composition on the physico‐mechanical properties of ultra‐low‐density hemp hurd particleboard

    by Johannes Fehrmann, Benoit Belleville, Barbara Ozarska, Wojciech (Voytek) S. Gutowski, David Wilson

    This study investigated Australian hemp hurd (Cannabis sativa L., “Frog One”) as a lignocellulosic raw material for ultra‐low‐density hemp particleboard (ULHPB) with densities ranging from 213 to 309 kg/m3. The hurd was first milled and fractionated into three particle size categories, that is, fine (F), medium (M), and coarse (C). Twelve unique ULHPB variants were then fabricated comprising varying particle loadings from four particle size mixes, that is, 100% C, 100% M, 50%/50% CM, 25%/50%/25% CMF, and adhesive contents of bio‐epoxy (EPX), phenol resorcinol formaldehyde (PRF), and emulsifiable methylene diphenyl diisocyanate (MDI), respectively. The panel assessments, conducted in accordance with the Australian reconstituted wood‐based panels standard AS/NZS 1859.1 (2017), revealed a significant effect of particle dimension on most physico‐mechanical properties. Furthermore, the resination method and pressing temperature controlled post‐cure panel expansion and additional panel characteristics. Notably, MDI‐ULHPB exhibited drastically different behavior and properties compared to EPX and PRF equivalents, demonstrating greater bending strength, stiffness, screw withdrawal strength, and dimensional stability. Importantly, all MDI variants conformed to the 15% thickness swelling limit for moisture resistant particleboard. Surface lamination of MDI‐bonded ULHPB with sheets of aluminum, Masonite, and Kraft liner significantly improved the inherently low flexural properties, suggesting the potential suitability of ULHPB as a core layer in lightweight sandwich composite panels. The integration of agricultural by‐products, such as hemp hurd, into engineered building materials presents a promising opportunity to mitigate the depletion of finite timber resources and aligns well with circular economy principles.Highlights: Utilizing agricultural residue as sustainable raw material in building products. Hemp hurd enables ultra‐low‐density particleboard with thermosetting resins. Coarse particle size mix enhances mechanical performance in panels. Panel characteristics controlled by resination method and pressing temperature. Lamination enhances functionality of lightweight hemp hurd sandwich panel.