Jovana Zečević
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jovana Zečević has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Krijn Pieter de Jong
Materials Chemistry and Catalysis, Debye Institute for Nanomaterials Science, Utrecht University, Universiteitsweg 99, 3584 CG Utrecht, The Netherlands
13 shared publications - Heiner Friedrich
Center For Multiscale Electron Microscopy Department of Chemical Engineering and Chemistry Eindhoven University of Technology Eindhoven The Netherlands
10 shared publications Krijn P. de Jong
Inorganic Chemistry and Catalysis, Debye Institute of Nanomaterials Science, Utrecht University, Utrecht, The Netherlands
10 shared publicationsPetra E. de Jongh
8 shared publications- Petra E. de Jongh
Materials Chemistry and Catalysis, Debye Institute for Nanomaterials Science, Utrecht University, 3584 CG Utrecht, The Netherlands
4 shared publications - Cedric Joseph Gommes
University of Liège
3 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by Elsevier in Materials Today Advances
- Vol. 31
3D imaging of dry and liquid-impregnated mesoporous materials
- 7 July 2026
- Published by Elsevier in Materials Today Advances
- Vol. 31
Open Access3D imaging of dry and liquid-impregnated mesoporous materials
- Open Access
- 5 March 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 16 (7) , 2331-2344
Cryogenic electron tomography reveals the mesoporous structure evolution during γ-Al 2 O 3 supported Mo and MoNiP catalyst formation
Heterogeneous catalysts play a central role in numerous industrially and societally relevant processes. Despite the widespread use, a detailed understanding of the support mesoporosity and its transformation during catalyst preparation remains incomplete. In this study, cryogenic electron tomography (cryo-ET) was utilized to resolve the 3D mesopore structure of γ-Al2O3 and to assess structural changes induced by oxidic Mo and MoNiP deposition and sulfidation during the preparation of hydrodesulfurization (HDS) catalysts. The intrinsic γ-Al2O3 surface and mesopore structure remained largely stable throughout calcination and sulfidation, although cryo-ET revealed subtle variations inaccessible to bulk characterization techniques. Oxidic Mo deposition introduced slight increases in tortuosity and surface corrugation, whereas oxidic MoNiP deposition induced minimal changes. Compared to the bare support, sulfidation of both Mo and MoNiP supported on γ-Al2O3 resulted in more tortuous mesopores and a more corrugated surface. Careful segmentation enabled separate analysis of γ-Al2O3 and MoS2 slabs, revealing that, for both catalysts, the γ-Al2O3 exhibited similar surface and mesopore modifications, and there were no significant differences in MoS2 slab morphology. Corrected Mo loadings derived from cryo-ET aligned with bulk measurements, validating the approach. These findings provide a comprehensive 3D perspective on mesopore stability during catalyst preparation and highlight the need for higher-resolution imaging and advanced 3D analysis to establish robust structure–function correlations.
- 5 March 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 16 (7) , 2331-2344
Open AccessCryogenic electron tomography reveals the mesoporous structure evolution during γ-Al 2 O 3 supported Mo and MoNiP catalyst formation
Heterogeneous catalysts play a central role in numerous industrially and societally relevant processes. Despite the widespread use, a detailed understanding of the support mesoporosity and its transformation during catalyst preparation remains incomplete. In this study, cryogenic electron tomography (cryo-ET) was utilized to resolve the 3D mesopore structure of γ-Al2O3 and to assess structural changes induced by oxidic Mo and MoNiP deposition and sulfidation during the preparation of hydrodesulfurization (HDS) catalysts. The intrinsic γ-Al2O3 surface and mesopore structure remained largely stable throughout calcination and sulfidation, although cryo-ET revealed subtle variations inaccessible to bulk characterization techniques. Oxidic Mo deposition introduced slight increases in tortuosity and surface corrugation, whereas oxidic MoNiP deposition induced minimal changes. Compared to the bare support, sulfidation of both Mo and MoNiP supported on γ-Al2O3 resulted in more tortuous mesopores and a more corrugated surface. Careful segmentation enabled separate analysis of γ-Al2O3 and MoS2 slabs, revealing that, for both catalysts, the γ-Al2O3 exhibited similar surface and mesopore modifications, and there were no significant differences in MoS2 slab morphology. Corrected Mo loadings derived from cryo-ET aligned with bulk measurements, validating the approach. These findings provide a comprehensive 3D perspective on mesopore stability during catalyst preparation and highlight the need for higher-resolution imaging and advanced 3D analysis to establish robust structure–function correlations.
- Open Access
- 16 December 2025
- Published by Wiley in Chemistry–Methods
- Vol. 6 (1)
Cryo Electron Tomography Reveals the Three‐Dimensional Structure of Disordered γ‐Al 2 O 3 in Its Bare, Liquid‐Impregnated, and Freeze‐Dried Status
Mesoporous materials have many technologically important applications and are often impregnated with a solution during functionalization and/or operation. However, our understanding of the liquid‐filled and dried states at the level of individual pores remains limited. Cryogenic electron tomography (cryo‐ET) enables local 3D imaging of liquid‐impregnated mesoporous materials with nanometer resolution, but it is rarely applied due to complex sample preparation, imaging, and analysis. Here, a “dry” cryo‐ET approach is presented, enabling the 3D imaging of water‐ and metal‐salt solution‐impregnated disordered mesoporous γ‐Al 2 O 3 supports. The results show that empty and liquid‐filled pores are clearly distinguishable and that mesoscale variations in pore volume and specific surface exist. Pore structure, pore size, and pore surface corrugation remain unaffected by water‐ or metal‐salt solutions. As solution molarity increases, reduced contrast between the solution and γ‐Al 2 O 3 support prevents quantitative analysis. After freeze‐drying, deposits accumulate at the perimeter of the imaged particle, while a uniform deposition is observed within the center of the pore network. Metal‐salt deposition reduces pore node distance and average size, while surface curvature decreases and corrugation increases. Our “dry” cryo‐ET workflow enables the first time 3D analysis and quantification of liquid‐impregnated and freeze‐dried disordered mesoporous materials.
- 16 December 2025
- Published by Wiley in Chemistry–Methods
- Vol. 6 (1)
Open AccessCryo Electron Tomography Reveals the Three‐Dimensional Structure of Disordered γ‐Al 2 O 3 in Its Bare, Liquid‐Impregnated, and Freeze‐Dried Status
Mesoporous materials have many technologically important applications and are often impregnated with a solution during functionalization and/or operation. However, our understanding of the liquid‐filled and dried states at the level of individual pores remains limited. Cryogenic electron tomography (cryo‐ET) enables local 3D imaging of liquid‐impregnated mesoporous materials with nanometer resolution, but it is rarely applied due to complex sample preparation, imaging, and analysis. Here, a “dry” cryo‐ET approach is presented, enabling the 3D imaging of water‐ and metal‐salt solution‐impregnated disordered mesoporous γ‐Al 2 O 3 supports. The results show that empty and liquid‐filled pores are clearly distinguishable and that mesoscale variations in pore volume and specific surface exist. Pore structure, pore size, and pore surface corrugation remain unaffected by water‐ or metal‐salt solutions. As solution molarity increases, reduced contrast between the solution and γ‐Al 2 O 3 support prevents quantitative analysis. After freeze‐drying, deposits accumulate at the perimeter of the imaged particle, while a uniform deposition is observed within the center of the pore network. Metal‐salt deposition reduces pore node distance and average size, while surface curvature decreases and corrugation increases. Our “dry” cryo‐ET workflow enables the first time 3D analysis and quantification of liquid‐impregnated and freeze‐dried disordered mesoporous materials.
- Top Cited Papers
- 8 July 2022
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 377 (6602) , 204-208
Maximizing noble metal utilization in solid catalysts by control of nanoparticle location
Maximizing the utilization of noble metals is crucial for applications such as catalysis. We found that the minimum loading of platinum for optimal performance in the hydroconversion of n -alkanes for industrially relevant bifunctional catalysts could be reduced by a factor of 10 or more through the rational arranging of functional sites at the nanoscale. Intentionally depositing traces of platinum nanoparticles on the alumina binder or the outer surface of zeolite crystals, instead of inside the zeolite crystals, enhanced isomer selectivity without compromising activity. Separation between platinum and zeolite acid sites preserved the metal and acid functions by limiting micropore blockage by metal clusters and enhancing access to metal sites. Reduced platinum nanoparticles were more active than platinum single atoms strongly bonded to the alumina binder.
- 8 July 2022
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 377 (6602) , 204-208
Top Cited PapersMaximizing noble metal utilization in solid catalysts by control of nanoparticle location
Maximizing the utilization of noble metals is crucial for applications such as catalysis. We found that the minimum loading of platinum for optimal performance in the hydroconversion of n -alkanes for industrially relevant bifunctional catalysts could be reduced by a factor of 10 or more through the rational arranging of functional sites at the nanoscale. Intentionally depositing traces of platinum nanoparticles on the alumina binder or the outer surface of zeolite crystals, instead of inside the zeolite crystals, enhanced isomer selectivity without compromising activity. Separation between platinum and zeolite acid sites preserved the metal and acid functions by limiting micropore blockage by metal clusters and enhancing access to metal sites. Reduced platinum nanoparticles were more active than platinum single atoms strongly bonded to the alumina binder.
- 21 April 2021
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 11 (11) , 3634-3658
Developments and advances in in situ transmission electron microscopy for catalysis research
The characterization of heterogeneous catalysts is critical to their development and to understand their performance by correlating their physicochemical properties to their activity, selectivity and stability. Transmission electron microscopy (TEM) is one of the routinely used characterization techniques, and is commonly limited to investigations of catalyst samples before and after synthesis, activation, and operation. Thus only indirect information can be obtained about structural transformations undergone by the catalyst during synthesis or catalysis. Effort over the decades in developing in situ TEM is showing promising results whereby the direct, real-time observation of the structural changes of materials under reaction conditions are becoming available. In this review we provide an overview of the developments in in situ TEM techniques, focusing on their application for studies related to catalysis by loosely following the four stages of the catalyst life cycle: synthesis, activation, performance and deactivation, and regeneration.
- 21 April 2021
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 11 (11) , 3634-3658
Developments and advances in in situ transmission electron microscopy for catalysis research
The characterization of heterogeneous catalysts is critical to their development and to understand their performance by correlating their physicochemical properties to their activity, selectivity and stability. Transmission electron microscopy (TEM) is one of the routinely used characterization techniques, and is commonly limited to investigations of catalyst samples before and after synthesis, activation, and operation. Thus only indirect information can be obtained about structural transformations undergone by the catalyst during synthesis or catalysis. Effort over the decades in developing in situ TEM is showing promising results whereby the direct, real-time observation of the structural changes of materials under reaction conditions are becoming available. In this review we provide an overview of the developments in in situ TEM techniques, focusing on their application for studies related to catalysis by loosely following the four stages of the catalyst life cycle: synthesis, activation, performance and deactivation, and regeneration.
- 7 May 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (20) , 11222-11231
Bad neighbour, good neighbour: how magnetic dipole interactions between soft and hard ferrimagnetic nanoparticles affect macroscopic magnetic properties in ferrofluids
Hard ferrimagnetic CoFe 2 O 4 nanoparticles become softer in the presence of neighbouring soft ferrimagnetic MnFe 2 O 4 nanoparticles.
- 7 May 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (20) , 11222-11231
Bad neighbour, good neighbour: how magnetic dipole interactions between soft and hard ferrimagnetic nanoparticles affect macroscopic magnetic properties in ferrofluids
Hard ferrimagnetic CoFe 2 O 4 nanoparticles become softer in the presence of neighbouring soft ferrimagnetic MnFe 2 O 4 nanoparticles.
- Open Access
- 31 December 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 124 (3) , 2202-2212
Growth of Supported Gold Nanoparticles in Aqueous Phase Studied by in Situ Transmission Electron Microscopy
Nanoparticle growth has long been a significant challenge in nanotechnology and catalysis, but the lack of knowledge on the fundamental nanoscale aspects of this process has made its understanding and predicting difficult, especially in a liquid phase. In this work, we successfully used liquid-phase transmission electron microscopy to image this process in real time at the nanometer scale, using an Au/TiO2 catalyst in the presence of NaCl(aq) as a case study. In situ LP-TEM clearly showed that the growth of Au nanoparticles occurred through a form of Ostwald ripening, whereby particles grew or disappeared, probably via monomer transfer, without clear correlation to particle size in contrast to predictions of classical Ostwald ripening models. In addition, the existence of a significant fraction of inert particles that neither grew, nor shrank, was observed. Furthermore, in situ TEM showed that particle shrinkage was sudden and seemed a stochastic process, while particle growth by monomer attachment was slow and likely the rate-determining step for sintering in this system. Identification and understanding of these individual nanoparticle events is critical for extending the accuracy and predictive power of Ostwald ripening models for nanomaterials.
- 31 December 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 124 (3) , 2202-2212
Open AccessGrowth of Supported Gold Nanoparticles in Aqueous Phase Studied by in Situ Transmission Electron Microscopy
Nanoparticle growth has long been a significant challenge in nanotechnology and catalysis, but the lack of knowledge on the fundamental nanoscale aspects of this process has made its understanding and predicting difficult, especially in a liquid phase. In this work, we successfully used liquid-phase transmission electron microscopy to image this process in real time at the nanometer scale, using an Au/TiO2 catalyst in the presence of NaCl(aq) as a case study. In situ LP-TEM clearly showed that the growth of Au nanoparticles occurred through a form of Ostwald ripening, whereby particles grew or disappeared, probably via monomer transfer, without clear correlation to particle size in contrast to predictions of classical Ostwald ripening models. In addition, the existence of a significant fraction of inert particles that neither grew, nor shrank, was observed. Furthermore, in situ TEM showed that particle shrinkage was sudden and seemed a stochastic process, while particle growth by monomer attachment was slow and likely the rate-determining step for sintering in this system. Identification and understanding of these individual nanoparticle events is critical for extending the accuracy and predictive power of Ostwald ripening models for nanomaterials.
- Open Access
- 2 October 2019
- Published by Wiley in ChemCatChem
- Vol. 12 (2) , 615-622
Assessment of the Location of Pt Nanoparticles in Pt/zeolite Y/γ‐Al2O3 Composite Catalysts
The location of Pt nanoparticles was studied in Pt/zeolite Y/γ‐Al2O3 composite catalysts prepared by H2PtCl6 ⋅ 6H2O (CPA) or Pt(NH3)4(NO3)2 (PTA) as Pt precursors. The aim of this study is to validate findings from Transmission Electron Microscopy (TEM) by using characterization techniques that sample larger amounts of catalyst per measurement. Quantitative X‐ray Photoelectron Spectroscopy (XPS) showed that the catalyst prepared with CPA led to a significantly higher Pt/Al atomic ratio than the catalyst prepared with PTA confirming that the 1‐2 nm sized Pt nanoparticles in the former catalyst were located on the open and mesoporous γ‐Al2O3 component, whereas they were located in the micropores of zeolite Y in the latter. By using infrared spectroscopy, a shift in the absorption band maximum of CO chemisorbed on Pt nanoparticles was observed, which can be attributed to a difference in electronic properties depending on the support of the Pt nanoparticles. Finally, model hydrogenation experiments were performed using β‐phenylcinnamaldehyde, a reactant molecule with low diffusivity in zeolite Y micropores, resulting in a 5 times higher activity for the catalyst prepared by CPA compared to PTA. The combined use of these characterization techniques allow us to draw more robust conclusions on the ability to control the location of Pt nanoparticles by using either CPA or PTA as precursors in zeolite/γ‐Al2O3 composite catalyst materials.
- 2 October 2019
- Published by Wiley in ChemCatChem
- Vol. 12 (2) , 615-622
Open AccessAssessment of the Location of Pt Nanoparticles in Pt/zeolite Y/γ‐Al2O3 Composite Catalysts
The location of Pt nanoparticles was studied in Pt/zeolite Y/γ‐Al2O3 composite catalysts prepared by H2PtCl6 ⋅ 6H2O (CPA) or Pt(NH3)4(NO3)2 (PTA) as Pt precursors. The aim of this study is to validate findings from Transmission Electron Microscopy (TEM) by using characterization techniques that sample larger amounts of catalyst per measurement. Quantitative X‐ray Photoelectron Spectroscopy (XPS) showed that the catalyst prepared with CPA led to a significantly higher Pt/Al atomic ratio than the catalyst prepared with PTA confirming that the 1‐2 nm sized Pt nanoparticles in the former catalyst were located on the open and mesoporous γ‐Al2O3 component, whereas they were located in the micropores of zeolite Y in the latter. By using infrared spectroscopy, a shift in the absorption band maximum of CO chemisorbed on Pt nanoparticles was observed, which can be attributed to a difference in electronic properties depending on the support of the Pt nanoparticles. Finally, model hydrogenation experiments were performed using β‐phenylcinnamaldehyde, a reactant molecule with low diffusivity in zeolite Y micropores, resulting in a 5 times higher activity for the catalyst prepared by CPA compared to PTA. The combined use of these characterization techniques allow us to draw more robust conclusions on the ability to control the location of Pt nanoparticles by using either CPA or PTA as precursors in zeolite/γ‐Al2O3 composite catalyst materials.
- Open Access
- 1 June 2019
- Published by Springer Nature in Nano Research
- Vol. 12 (10) , 2653
Erratum to: Assessment of oxide nanoparticle stability in liquid phase transmission electron microscopy
- 1 June 2019
- Published by Springer Nature in Nano Research
- Vol. 12 (10) , 2653
Open AccessErratum to: Assessment of oxide nanoparticle stability in liquid phase transmission electron microscopy
- Open Access
- 22 May 2019
- Published by Tsinghua University Press in Nano Research
- Vol. 12 (9) , 2355-2363
Assessment of oxide nanoparticle stability in liquid phase transmission electron microscopy
Studying liquid phase nanoscale dynamic processes of oxide nanoparticles is of considerable interest to a wide variety of fields. Recently developed liquid phase transmission electron microscopy (LP-TEM) is a promising technique, but destabilization of oxides by solid-liquid-electron interactions remains an important challenge. In this work we present a methodology to assess LP-TEM oxide stability in an aqueous phase, by subjecting several oxides of technological importance to a controlled electron dose in water. We show a correlation based on the Gibbs free energy of oxide hydration that can be used to assess the stability of oxides and demonstrate the existence of several remarkably stable oxides, with no observable structural changes after one hour of electron beam irradiation in LP-TEM. Rationalizing such destabilization phenomena combined with the identification of stable oxides allows for designing LP-TEM experiments free from adverse beam effects and thus investigations of numerous relevant nanoscale processes in water.
- 22 May 2019
- Published by Tsinghua University Press in Nano Research
- Vol. 12 (9) , 2355-2363
Open AccessAssessment of oxide nanoparticle stability in liquid phase transmission electron microscopy
Studying liquid phase nanoscale dynamic processes of oxide nanoparticles is of considerable interest to a wide variety of fields. Recently developed liquid phase transmission electron microscopy (LP-TEM) is a promising technique, but destabilization of oxides by solid-liquid-electron interactions remains an important challenge. In this work we present a methodology to assess LP-TEM oxide stability in an aqueous phase, by subjecting several oxides of technological importance to a controlled electron dose in water. We show a correlation based on the Gibbs free energy of oxide hydration that can be used to assess the stability of oxides and demonstrate the existence of several remarkably stable oxides, with no observable structural changes after one hour of electron beam irradiation in LP-TEM. Rationalizing such destabilization phenomena combined with the identification of stable oxides allows for designing LP-TEM experiments free from adverse beam effects and thus investigations of numerous relevant nanoscale processes in water.