VRVinayak Rastogi

Vinayak Rastogi

*This is an algorithmically generated author record based on publicly available information.

Vinayak Rastogi has a total of 130 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • (Invited) Challenges for Etch Technology and the Integration of New Channel Materials Beyond 7 nm

    by Alok Ranjan, Vinayak Rastogi, Peter Ventzek

    Integration of new channel materials in current semiconductor manufacturing scheme would represent a leap advance in CMOS technology. Processing of new channel materials (III-V’s, Ge and SiGe) via dry etch poses significant challenges. Dry (plasma) etch can be used to pattern channel materials after they are deposited using an epitaxial process; alternatively channels maybe inserted into bounded (for example an oxide) recesses (for example silicon) fabricated using etch technologies already developed for FinFET and SAQP applications. With dry etch technology there is the ever-present worry of damage. Atomic later etching (ALE) is an emerging viable option for damage free etch. This presentation will show how conventional and advanced plasma etch technologies provide a path for logic manufacture beyond 7 nm with a realistic picture of the trade-offs that must be handled for introduction of III-V materials, Ge or SiGe.

  • (Invited) Challenges for Etch Technology and the Integration of New Channel Materials Beyond 7 nm

    by Alok Ranjan, Vinayak Rastogi, Peter Ventzek

    Even with the copious advances in logic device fabrication, integration of new channel materials would represent a significant advance in CMOS technology. [1] Successful integration of new channel materials (III-V’s, Ge and SiGe) pose significant challenges for etch technology. Dry (plasma) etch technology can be used to pattern channel materials after they are deposited using an epitaxial process [2]; alternatively channels maybe inserted into bounded (for example an oxide) recesses (for example silicon) fabricated using etch technologies already developed for FinFET and SAQP applications. Less appealing is the use of wet processes that have troublesome crystallographic orientation dependencies. Dry etch technology for most new channel material candidates is not new. [3] Still, with dry etch technology there is the ever-present worry of damage. [4-6] High precision etch technology commonly referred to as atomic later etching (ALE) is an emerging viable option for new channel material integration. [7-10] Some approaches employ non-mainstream techniques such as neutral beam technology [8] or complex precursors. [10] Recent developments reinforce that conventional plasma etch technologies developed using concurrent engineering methods can meet the requirements for 7 and 5 nm logic fabrication. [7,11] This presentation will show how advanced plasma etch technologies provide a path for logic manufacture beyond 7 nm with a realistic picture of the trade-offs that must be handled for the introduction of III-Vs, Ge or SiGe. All in all, etch technologies if successfully implemented for new channel material integration relies of leveraging surface chemistry mechanisms. The presentation will be rounded out with a discussion of how first-principles methods (e.g., DFT methods) can be used to gain insight into important plasma –surface interaction mechanisms. S. Takagi et al., Japanese Journal of Applied Physics 54, 06FA01 (2015) Chen et al,. Nanoscale Research Letters, 7, 431 (2012) Plasma Etching of III–V Nitrides,” by R. Shul, in Processing of Wide Band Gap Semiconductors: Growth, Processing and Applications, 250 (2000), ed., S.J. Pearton F.D. Auret et al., Physica B, 407, 1497 (2012) Kasumandari et al., Appl. Phys. Lett., 103, 033511 (2013) “Dry Etching of Semiconductors at the Nano-and Micro-Scale” by S.J. Pearton in Vistas in Nanofabrication, (2012) A. Ranjan et al., J. Vac. Sci. Technol. A 34, 031304 (2016) S.D. Park et al., Appl. Phys. Lett. 91, 013110 (2007); C. T. Carver et al., ECS J. Sol. St. Sci. Tech., 4 N5005-N5009 (2015) S. M. George, Chem. Rev., 110, 111 (2010) S.D. Sherpa et al., J. Vac. Sci. Technol. A 35, 01A102 (2017)


  • (Invited) Control of Atomic Layer Reactions in Plasma Processing

    by Peter Ventzek, S D Sherpa, M Wang, V Rastogi, Alok Ranjan

    Control of atomic layer reactions in discrete adsorption and desorption steps is what enables atomic layer etching (ALE) and escape of process trade-offs for 7 nm technologies and beyond. Silicon ALE has been demonstrated but challenges remain mating precursors, process chambers and materials in ALE for other materials. This brief paper reviews recent activity devoted to the engineering of silicon, oxide and nitride material ALE. Hybridized ALD-ALE and ALD-Etch processes are discussed which may overcome the challenges posed by the etch of oxide and nitride materials for patterning, contact and memory applications.


  • Implementation of atomic layer etching of silicon: Scaling parameters, feasibility, and profile control

    by Alok Ranjan, Mingmei Wang, Sonam D. Sherpa, Vinayak Rastogi, Akira Koshiishi, Peter L. G. Ventzek

    Atomic or layer by layer etching of silicon exploits temporally segregated self-limiting adsorption and material removal steps to mitigate the problems associated with continuous or quasicontinuous (pulsed) plasma processes: selectivity loss, damage, and profile control. Successful implementation of atomic layer etching requires careful choice of the plasma parameters for adsorption and desorption steps. This paper illustrates how process parameters can be arrived at through basic scaling exercises, modeling and simulation, and fundamental experimental tests of their predictions. Using chlorine and argon plasma in a radial line slot antenna plasma source as a platform, the authors illustrate how cycle time, ion energy, and radical to ion ratio can be manipulated to manage the deviation from ideality when cycle times are shortened or purges are incomplete. Cell based Monte Carlo feature scale modeling is used to illustrate profile outcomes. Experimental results of atomic layer etching processes are illustrated on silicon line and space structures such that iso-dense bias and aspect ratio dependent free profiles are produced. Experimental results also illustrate the profile control margin as processes move from atomic layer to multilayer by layer etching. The consequence of not controlling contamination (e.g., oxygen) is shown to result in deposition and roughness generation.


  • Plasma etch patterning of EUV lithography: balancing roughness and selectivity trade off

    by Vinayak Rastogi, Genevieve Beique, Lei Sun, Hongyun Cottle, Yannick Feurprier, Andrew W. Metz, Kaushik A. Kumar, Catherine Labelle, John Arnold, Matthew Colburn, et al.


  • Evaluation of novel processing approaches to improve extreme ultraviolet (EUV) photoresist pattern quality

    by Cecilia Montgomery, Jun Sung Chun, Yu-Jen Fan, Shih-Hui Jen, Mark Neisser, Kevin D. Cummings, Warren Montgomery, Takashi Saito, Lior Huli, David Hetzer, et al.


  • Driving DSA into volume manufacturing

    by Mark Somervell, Takashi Yamauchi, Soichiro Okada, Tadatoshi Tomita, Takanori Nishi, Shinichiro Kawakami, Makoto Muramatsu, Etsuo Iijima, Vinayak Rastogi, Takeo Nakano, et al.

    Directed Self-Assembly (DSA) is being extensively evaluated for application in semiconductor process integration.1-7 Since 2011, the number of publications on DSA at SPIE has exploded from roughly 26 to well over 80, indicating the groundswell of interest in the technology. Driving this interest are a number of attractive aspects of DSA including the ability to form both line/space and hole patterns at dimensions below 15 nm, the ability to achieve pitch multiplication to extend optical lithography, and the relatively low cost of the processes when compared with EUV or multiple patterning options. Tokyo Electron Limited has focused its efforts in scaling many laboratory demonstrations to 300 mm wafers. Additionally, we have recognized that the use of DSA requires specific design considerations to create robust layouts. To this end, we have discussed the development of a DSA ecosystem that will make DSA a viable technology for our industry, and we have partnered with numerous companies to aid in the development of the ecosystem. This presentation will focus on our continuing role in developing the equipment required for DSA implementation specifically discussing defectivity reduction on flows for making line-space and hole patterns, etch transfer of DSA patterns into substrates of interest, and integration of DSA processes into larger patterning schemes.


  • Fin formation using graphoepitaxy DSA for FinFET device fabrication

    by Chi-Chun Liu, Fee Li Lie, Vinayak Rastogi, Elliott Franke, Nihar Mohanty, Richard Farrell, Hsinyu Tsai, Kafai Lai, Melih Ozlem, Wooyong Cho, et al.

    A 27nm-pitch Graphoepitaxy directed self-assembly (DSA) process targeting fin formation for FinFET device fabrication is studied in a 300mm pilot line environment. The re-designed guiding pattern of graphoepitaxy DSA process determines not only the fine DSA structures but also the fin customization in parallel direction. Consequently, the critical issue of placement error is now resolved with the potential of reduction in lithography steps. However, challenges in subsequent pattern transfer are observed due to insufficient etch budget. The cause of the issues and process optimization are illustrated. Finally, silicon fins with 100nm depth in substrate with pre-determined customization is demonstrated.


  • Trench and hole patterning with EUV resists using dual frequency capacitively coupled plasma (CCP)

    by Yannick Feurprier, Katie Lutker-Lee, Vinayak Rastogi, Hiroie Matsumoto, Yuki Chiba, Andrew Metz, Kaushik Kumar, Genevieve Beique, Andre Labonte, Cathy Labelle, et al.

    Patterning at 10 nm and sub-10 nm technology nodes is one of the key challenges for the semiconductor industry. Several patterning techniques are under investigation to enable the aggressive pitch requirements demanded by the logic technologies. EUV based patterning is being considered as a serious candidate for the sub-10nm nodes. As has been widely published, a new technology like EUV has its share of challenges. One of the main concerns with EUV resists is that it tends to have a lower etch selectivity and worse LER/LWR than traditional 193nm resists. Consequently the characteristics of the dry etching process play an increasingly important role in defining the outcome of the patterning process. In this paper, we will demonstrate the role of the dual-frequency Capacitively Coupled Plasma (CCP) in the EUV patterning process with regards to improving LER/LWR, resist selectivity and CD tunability for holes and line patterns. One of the key knobs utilized here to improve LER and LWR, involves superimposing a negative DC voltage in RF plasma at one of the electrodes. The emission of ballistic electrons, in concert with the plasma chemistry, has shown to improve LER and LWR. Results from this study along with traditional plasma curing methods will be presented. In addition to this challenge, it is important to understand the parameters needed to influence CD tunability and improve resist selectivity. Data will be presented from a systematic study that shows the role of various plasma etch parameters that influence the key patterning metrics of CD, resist selectivity and LER/LWR. This work was performed by the Research Alliance Teams at various IBM Research and Development Facilities.


  • High speed EUV using post processing and self-aligned double patterning as a speed enhancement technique

    by Jerome Wandell, Anton Devilliers, Lior Huli, S Biesemans, Kathleen Nafus, Michael Carcasi, Jeff Smith, Dave Hetzer, C D Higgins, Vinayak Rastogi, et al.