Dashuai Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dashuai Wang has a total of 182 co-authors. Here are the top co-authors by number of shared publications:
- Yingjin Wei
Jilin University
16 shared publications Gang Chen
14 shared publicationsRuqian Lian
13 shared publicationsDongxiao Kan
Northwest Institute for Non-Ferrous Metal Research
8 shared publicationsJing Xu
College of Science
8 shared publicationsLecheng Lei
Key Laboratory of Biomass Chemical Engineering of Ministry of Education College of Chemical and Biological Engineering Zhejiang University Hangzhou China
8 shared publications
Latest Publications
- Open Access
- 17 November 2026
- Published by Springer Nature in Nature Communications
Hydroxyl-mediated oxygen anchoring steers CO electroreduction toward ethanol
- 17 November 2026
- Published by Springer Nature in Nature Communications
Open AccessHydroxyl-mediated oxygen anchoring steers CO electroreduction toward ethanol
- Open Access
- 24 October 2026
- Published by Springer Nature in Nature Communications
An integrated cathode-electrolyte architecture with Cu dual active-sites for all-solid-state Li–CO2 batteries
- 24 October 2026
- Published by Springer Nature in Nature Communications
Open AccessAn integrated cathode-electrolyte architecture with Cu dual active-sites for all-solid-state Li–CO2 batteries
- 20 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (39) , e6973257
Steering CO 2 Electroreduction to Methane and Deuterated Methane via Hydrogen‐Bond Engineering on Copper–Phenolic Networks
Electrochemical CO 2 reduction (eCO 2 R) powered by renewable electricity offers a sustainable route for carbon cycling and value‐added chemical synthesis. Among possible products, methane (CH 4 ) is particularly attractive due to its high energy density and direct compatibility with existing natural gas infrastructure. However, it remains challenging to selectively produce CH 4 with conventional copper catalysts. Herein, we developed a copper–phenolic network catalyst featuring atomically dispersed Cu─O 4 sites, where adjacent uncoordinated hydroxyl groups from tannic acid (TA) act as intrinsic hydrogen‐bond donors to stabilize the oxygen‐bound formate intermediate (*OCHO). This hydrogen‐bond‐enabled microenvironment redirects eCO 2 R from the conventional *CO‐mediated pathway toward a formate‐derived route, while simultaneously suppressing the competing hydrogen evolution reaction. As a result, the optimized Cu‐PTA catalyst delivers a high CH 4 Faradaic efficiency of 75.5% with a partial current density of 302.0 mA cm −2 in aqueous electrolyte. Notably, this pathway‐steering strategy is readily applicable to deuterated electrolytes, enabling efficient production of deuterated methane (CD 4 ) with a record‐high Faradaic efficiency of 83.1% and a partial current density of 415.6 mA cm −2 . This work establishes hydrogen‐bond engineering as a general approach for manipulating reaction pathways through local stabilization of oxygen‐bound intermediates toward sustainable synthesis of high‐value chemicals.
- 20 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (39) , e6973257
Steering CO 2 Electroreduction to Methane and Deuterated Methane via Hydrogen‐Bond Engineering on Copper–Phenolic Networks
Electrochemical CO 2 reduction (eCO 2 R) powered by renewable electricity offers a sustainable route for carbon cycling and value‐added chemical synthesis. Among possible products, methane (CH 4 ) is particularly attractive due to its high energy density and direct compatibility with existing natural gas infrastructure. However, it remains challenging to selectively produce CH 4 with conventional copper catalysts. Herein, we developed a copper–phenolic network catalyst featuring atomically dispersed Cu─O 4 sites, where adjacent uncoordinated hydroxyl groups from tannic acid (TA) act as intrinsic hydrogen‐bond donors to stabilize the oxygen‐bound formate intermediate (*OCHO). This hydrogen‐bond‐enabled microenvironment redirects eCO 2 R from the conventional *CO‐mediated pathway toward a formate‐derived route, while simultaneously suppressing the competing hydrogen evolution reaction. As a result, the optimized Cu‐PTA catalyst delivers a high CH 4 Faradaic efficiency of 75.5% with a partial current density of 302.0 mA cm −2 in aqueous electrolyte. Notably, this pathway‐steering strategy is readily applicable to deuterated electrolytes, enabling efficient production of deuterated methane (CD 4 ) with a record‐high Faradaic efficiency of 83.1% and a partial current density of 415.6 mA cm −2 . This work establishes hydrogen‐bond engineering as a general approach for manipulating reaction pathways through local stabilization of oxygen‐bound intermediates toward sustainable synthesis of high‐value chemicals.
- 20 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (39) , e6973257
Steering CO 2 Electroreduction to Methane and Deuterated Methane via Hydrogen‐Bond Engineering on Copper–Phenolic Networks
Electrochemical CO 2 reduction (eCO 2 R) powered by renewable electricity offers a sustainable route for carbon cycling and value‐added chemical synthesis. Among possible products, methane (CH 4 ) is particularly attractive due to its high energy density and direct compatibility with existing natural gas infrastructure. However, it remains challenging to selectively produce CH 4 with conventional copper catalysts. Herein, we developed a copper–phenolic network catalyst featuring atomically dispersed Cu─O 4 sites, where adjacent uncoordinated hydroxyl groups from tannic acid (TA) act as intrinsic hydrogen‐bond donors to stabilize the oxygen‐bound formate intermediate (*OCHO). This hydrogen‐bond‐enabled microenvironment redirects eCO 2 R from the conventional *CO‐mediated pathway toward a formate‐derived route, while simultaneously suppressing the competing hydrogen evolution reaction. As a result, the optimized Cu‐PTA catalyst delivers a high CH 4 Faradaic efficiency of 75.5% with a partial current density of 302.0 mA cm −2 in aqueous electrolyte. Notably, this pathway‐steering strategy is readily applicable to deuterated electrolytes, enabling efficient production of deuterated methane (CD 4 ) with a record‐high Faradaic efficiency of 83.1% and a partial current density of 415.6 mA cm −2 . This work establishes hydrogen‐bond engineering as a general approach for manipulating reaction pathways through local stabilization of oxygen‐bound intermediates toward sustainable synthesis of high‐value chemicals.
- 20 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (39) , e6973257
Steering CO 2 Electroreduction to Methane and Deuterated Methane via Hydrogen‐Bond Engineering on Copper–Phenolic Networks
Electrochemical CO 2 reduction (eCO 2 R) powered by renewable electricity offers a sustainable route for carbon cycling and value‐added chemical synthesis. Among possible products, methane (CH 4 ) is particularly attractive due to its high energy density and direct compatibility with existing natural gas infrastructure. However, it remains challenging to selectively produce CH 4 with conventional copper catalysts. Herein, we developed a copper–phenolic network catalyst featuring atomically dispersed Cu─O 4 sites, where adjacent uncoordinated hydroxyl groups from tannic acid (TA) act as intrinsic hydrogen‐bond donors to stabilize the oxygen‐bound formate intermediate (*OCHO). This hydrogen‐bond‐enabled microenvironment redirects eCO 2 R from the conventional *CO‐mediated pathway toward a formate‐derived route, while simultaneously suppressing the competing hydrogen evolution reaction. As a result, the optimized Cu‐PTA catalyst delivers a high CH 4 Faradaic efficiency of 75.5% with a partial current density of 302.0 mA cm −2 in aqueous electrolyte. Notably, this pathway‐steering strategy is readily applicable to deuterated electrolytes, enabling efficient production of deuterated methane (CD 4 ) with a record‐high Faradaic efficiency of 83.1% and a partial current density of 415.6 mA cm −2 . This work establishes hydrogen‐bond engineering as a general approach for manipulating reaction pathways through local stabilization of oxygen‐bound intermediates toward sustainable synthesis of high‐value chemicals.
- 11 July 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (15) , 14279-14290
Unveiling Thickness-Dependent Interfacial Synergy in Inverse M@BO x Catalysts for Highly Efficient Oxidative Dehydrogenation of Propane
The BOx overlayer, promoted by a subsurface metal promoter in the M@BOx core–shell configuration, exhibits high activity and selectivity in the low-temperature oxidative dehydrogenation of propane (ODHP). However, the inverse interfacial interactions between metal and the BOx overlayer remain incompletely understood. In this study, we present a bottom-up synthetic strategy for fabricating Ru@BOx inverse catalysts with tunable boron oxide overlayer thickness by varying CO2 concentrations during the oxidation etching process. The results demonstrate a pronounced BOx shell thickness-dependence of the low-temperature ODHP performance of Ru@BOx/BN catalysts. The promotional effect of subsurface metal lies in enhancing the density of hydroxylated BOx active sites and modulating the electronic structure of the BOx overlayer via electronic interfacial interactions. The promotion is confined to the bottom few layers of BOx on Ru NPs and decreases rapidly with increasing shell thickness.
- 11 July 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (15) , 14279-14290
Unveiling Thickness-Dependent Interfacial Synergy in Inverse M@BO x Catalysts for Highly Efficient Oxidative Dehydrogenation of Propane
The BOx overlayer, promoted by a subsurface metal promoter in the M@BOx core–shell configuration, exhibits high activity and selectivity in the low-temperature oxidative dehydrogenation of propane (ODHP). However, the inverse interfacial interactions between metal and the BOx overlayer remain incompletely understood. In this study, we present a bottom-up synthetic strategy for fabricating Ru@BOx inverse catalysts with tunable boron oxide overlayer thickness by varying CO2 concentrations during the oxidation etching process. The results demonstrate a pronounced BOx shell thickness-dependence of the low-temperature ODHP performance of Ru@BOx/BN catalysts. The promotional effect of subsurface metal lies in enhancing the density of hydroxylated BOx active sites and modulating the electronic structure of the BOx overlayer via electronic interfacial interactions. The promotion is confined to the bottom few layers of BOx on Ru NPs and decreases rapidly with increasing shell thickness.
- Open Access
- 15 June 2026
- Published by Elsevier in SSRN Electronic Journal
Liquid-Acid-Assisted in Situ Co-Sintering of Heteroatom-Doped Hard Carbon Anodes for Ultrafast and Low-Temperature Sodium Storage
Carbon anodes that combine fast ion transport with stable structures are needed for sodium-ion batteries (SIBs) operating at high rates and across a wide temperature range. Here, we report a liquid-phase impregnation and in-situ gas evolution strategy to prepare a highly defective, sulfur-doped hard carbon (ZHC-S-1300) from bamboo. Nanoconfined decomposition of H2SO4 generates internal SO2 that etches the carbon framework, which can produce covalent C–S–C linkages, 0.35 nm closed ultramicropores, and a hierarchical pore network in a single step. The C–S–C linkages alter the local electronic structure of the carbon, lowering the interfacial charge-transfer resistance and increasing Na+ binding affinity. ZHC-S-1300 delivers a reversible capacity of 349.1 mAh g-1 at 1C with 94.9% retention after 1,500 cycles, and 222.7 mAh g-1 under a 30C rate with 90.0% retention over 5,000 cycles. The anode also performs well at low temperature (−10 °C), retaining 288.1 mAh g-1 at 1C. This heteroatom-modulated lattice engineering approach offers a route to hard carbon anodes with improved sodium storage and diffusion kinetics for fast-charging applications.
- 15 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLiquid-Acid-Assisted in Situ Co-Sintering of Heteroatom-Doped Hard Carbon Anodes for Ultrafast and Low-Temperature Sodium Storage
Carbon anodes that combine fast ion transport with stable structures are needed for sodium-ion batteries (SIBs) operating at high rates and across a wide temperature range. Here, we report a liquid-phase impregnation and in-situ gas evolution strategy to prepare a highly defective, sulfur-doped hard carbon (ZHC-S-1300) from bamboo. Nanoconfined decomposition of H2SO4 generates internal SO2 that etches the carbon framework, which can produce covalent C–S–C linkages, 0.35 nm closed ultramicropores, and a hierarchical pore network in a single step. The C–S–C linkages alter the local electronic structure of the carbon, lowering the interfacial charge-transfer resistance and increasing Na+ binding affinity. ZHC-S-1300 delivers a reversible capacity of 349.1 mAh g-1 at 1C with 94.9% retention after 1,500 cycles, and 222.7 mAh g-1 under a 30C rate with 90.0% retention over 5,000 cycles. The anode also performs well at low temperature (−10 °C), retaining 288.1 mAh g-1 at 1C. This heteroatom-modulated lattice engineering approach offers a route to hard carbon anodes with improved sodium storage and diffusion kinetics for fast-charging applications.
- Open Access
- 8 January 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1) , 105
Regulation Engineering of Alkali Metal Interlayer Pillar in P2-Type Cathode for Ultra-High Rate and Long-Term Cycling Sodium-Ion Batteries
Layered oxides have attracted significant attention as cathodes for sodium-ion batteries (SIBs) due to their compositional versatility and tuneable electrochemical performance. However, these materials still face challenges such as structural phase transitions, Na + /vacancy ordering, and Jahn–Teller distortion effect, resulting in severe capacity decay and sluggish ion kinetics. We develop a novel Cu/Y dual-doping strategy that leads to the formation of "Na–Y" interlayer aggregates, which act as structural pillars within alkali metal layers, enhancing structural stability and disrupting the ordered arrangement of Na + /vacancies. This disruption leads to a unique coexistence of ordered and disordered Na + /vacancy states with near-zero strain, which significantly improves Na + diffusion kinetics. This structural innovation not only mitigates the unfavorable P2–O2 phase transition but also facilitates rapid ion transport. As a result, the doped material demonstrates exceptional electrochemical performance, including an ultra-long cycle life of 3000 cycles at 10 C and an outstanding high-rate capability of ~70 mAh g −1 at 50 C. The discovery of this novel interlayer pillar, along with its role in modulating Na⁺/vacancy arrangements, provides a fresh perspective on engineering layered oxides. It opens up promising new pathways for the structural design of advanced cathode materials toward efficient, stable, and high-rate SIBs.
- 8 January 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1) , 105
Open AccessRegulation Engineering of Alkali Metal Interlayer Pillar in P2-Type Cathode for Ultra-High Rate and Long-Term Cycling Sodium-Ion Batteries
Layered oxides have attracted significant attention as cathodes for sodium-ion batteries (SIBs) due to their compositional versatility and tuneable electrochemical performance. However, these materials still face challenges such as structural phase transitions, Na + /vacancy ordering, and Jahn–Teller distortion effect, resulting in severe capacity decay and sluggish ion kinetics. We develop a novel Cu/Y dual-doping strategy that leads to the formation of "Na–Y" interlayer aggregates, which act as structural pillars within alkali metal layers, enhancing structural stability and disrupting the ordered arrangement of Na + /vacancies. This disruption leads to a unique coexistence of ordered and disordered Na + /vacancy states with near-zero strain, which significantly improves Na + diffusion kinetics. This structural innovation not only mitigates the unfavorable P2–O2 phase transition but also facilitates rapid ion transport. As a result, the doped material demonstrates exceptional electrochemical performance, including an ultra-long cycle life of 3000 cycles at 10 C and an outstanding high-rate capability of ~70 mAh g −1 at 50 C. The discovery of this novel interlayer pillar, along with its role in modulating Na⁺/vacancy arrangements, provides a fresh perspective on engineering layered oxides. It opens up promising new pathways for the structural design of advanced cathode materials toward efficient, stable, and high-rate SIBs.
- 28 November 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (1) , 359-370
Unlocking high alcohol product selectivity in methane-to-ethanol conversion at practically relevant current density via dual-site-driven cascade electrocatalysis
A machine-learning-guided Mo–Cu dual-site cascade enables efficient electrochemical CH 4 -to-EtOH conversion via a three-electron *O 2 − -mediated pathway, achieving near-100% liquid selectivity.
- 28 November 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (1) , 359-370
Unlocking high alcohol product selectivity in methane-to-ethanol conversion at practically relevant current density via dual-site-driven cascade electrocatalysis
A machine-learning-guided Mo–Cu dual-site cascade enables efficient electrochemical CH 4 -to-EtOH conversion via a three-electron *O 2 − -mediated pathway, achieving near-100% liquid selectivity.
- 2 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (32) , 45668-45675
Optimizing Ru Metallene Catalytic Cathodes via Compressive Strain Engineering for an Improved Li–CO2 Battery
Ru-based catalysts have already shown potential advantages in Li-CO2 batteries. The strain regulation strategy has been widely used in various catalysts to achieve catalytic activity enhancement. In this study, seven different strained RuX metallenes were systemically researched by first-principles calculations, where X = ±6, ±4, ±2, and 0%. The structure and electronic properties of RuX metallenes were investigated as well as adsorption energies of reactants, reaction thermodynamics, and electrochemical performance. The results showed that lattice expansion contributed to an upward shift in the d-band center, which enhanced the strength of the CO2 adsorption on RuX. A linear relationship between CO2 activation and lattice strain was demonstrated by analyzing the bond lengths, bond strengths of C-O, and bond angles of CO2. Specifically, under tensile strain, the CO2 activation on RuX was gradually improved. Among all RuX, Ru-2 metallene with an appropriate CO2 adsorption energy exhibited the lowest reaction energy (0.93 eV) for the rate-determining step of Li2CO3 and C formation and the lowest overpotential (0.85 V), demonstrating its excellent catalytic performance in Li-CO2 batteries. This work elucidated the electrochemical mechanism of strain regulation on RuX metallenes as cathode catalysts for Li-CO2 batteries and provided valuable insights for designing metal catalysts with improved catalytic activity.
- 2 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (32) , 45668-45675
Optimizing Ru Metallene Catalytic Cathodes via Compressive Strain Engineering for an Improved Li–CO2 Battery
Ru-based catalysts have already shown potential advantages in Li-CO2 batteries. The strain regulation strategy has been widely used in various catalysts to achieve catalytic activity enhancement. In this study, seven different strained RuX metallenes were systemically researched by first-principles calculations, where X = ±6, ±4, ±2, and 0%. The structure and electronic properties of RuX metallenes were investigated as well as adsorption energies of reactants, reaction thermodynamics, and electrochemical performance. The results showed that lattice expansion contributed to an upward shift in the d-band center, which enhanced the strength of the CO2 adsorption on RuX. A linear relationship between CO2 activation and lattice strain was demonstrated by analyzing the bond lengths, bond strengths of C-O, and bond angles of CO2. Specifically, under tensile strain, the CO2 activation on RuX was gradually improved. Among all RuX, Ru-2 metallene with an appropriate CO2 adsorption energy exhibited the lowest reaction energy (0.93 eV) for the rate-determining step of Li2CO3 and C formation and the lowest overpotential (0.85 V), demonstrating its excellent catalytic performance in Li-CO2 batteries. This work elucidated the electrochemical mechanism of strain regulation on RuX metallenes as cathode catalysts for Li-CO2 batteries and provided valuable insights for designing metal catalysts with improved catalytic activity.
- 16 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (30) , 26185-26194
Engineering the Coordination Environment of Metal Centers for Selective and High-Current CO2 Electromethanation
Renewable energy-driven CO2 to CH4 conversion represents a pivotal strategy for achieving carbon neutrality, with the primary scientific challenge residing in controllably accelerating protonation kinetics. Atomically precise engineering of metal coordination catalysts offers a promising route to tailor reaction pathways. Herein, we construct a dual-active-site catalyst featuring Cu-S and Eu-N coordination centers. Through atomic-level engineering of active site microenvironments, the optimized catalyst demonstrates performance comparable to state-of-the-art systems, achieving a remarkable CH4 Faradaic efficiency of 75.8% alongside CH4 partial current density of 303.3 mA cm-2. Mechanistic studies reveal that isolated Cu sites hinder C-C coupling, while the strategically dispersed Eu sites facilitate efficient water activation, which is a critical process that generates abundant protons to accelerate the rate-limiting *CO hydrogenation step. This study establishes fundamental design principles for steering selective reaction pathways through atomic-scale modulation of active site architectures and their catalytic microenvironments.
- 16 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (30) , 26185-26194
Engineering the Coordination Environment of Metal Centers for Selective and High-Current CO2 Electromethanation
Renewable energy-driven CO2 to CH4 conversion represents a pivotal strategy for achieving carbon neutrality, with the primary scientific challenge residing in controllably accelerating protonation kinetics. Atomically precise engineering of metal coordination catalysts offers a promising route to tailor reaction pathways. Herein, we construct a dual-active-site catalyst featuring Cu-S and Eu-N coordination centers. Through atomic-level engineering of active site microenvironments, the optimized catalyst demonstrates performance comparable to state-of-the-art systems, achieving a remarkable CH4 Faradaic efficiency of 75.8% alongside CH4 partial current density of 303.3 mA cm-2. Mechanistic studies reveal that isolated Cu sites hinder C-C coupling, while the strategically dispersed Eu sites facilitate efficient water activation, which is a critical process that generates abundant protons to accelerate the rate-limiting *CO hydrogenation step. This study establishes fundamental design principles for steering selective reaction pathways through atomic-scale modulation of active site architectures and their catalytic microenvironments.