Mercedes Torneiro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mercedes Torneiro has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Massimo Lazzari
Universidade de Santiago de Compostela
3 shared publications Julio I. Urzúa
Departamento de Química Orgánica, Facultade de Química, Universidade de Santiago de Compostela , 15782 Santiago de Compostela, Spain
2 shared publicationsAntonio Mouriño
Departamento de Química Orgánica y Unidade Asociada al CSIC, Universidad de Santiago de Compostela, 15782 Santiago de Compostela, Spain
1 shared publication- Daniel González-Fernández
Departamento de Química Física, Facultade de Química, and Centro Singular de Investigación en Química Biolóxica e Materiais Moleculares (CIQUS), Universidade de Santiago de Compostela, 15782 Santiago de Compostela, Spain
1 shared publication Daniel Nicoletti
Departamento de Química Orgánica y Unidade Asociada al CSIC, Universidad de Santiago de Compostela, 15782 Santiago de Compostela, Spain
1 shared publication- Jose A. Dobado
Grupo de Modelización y Diseño Molecular Departamento de Química Orgánica Universidad de Granada Avda Fuentenueva s/n 18071 Granada Spain
1 shared publication
Latest Publications
- Open Access
Some Guidelines for the Synthesis and Melting Characterization of Azide Poly(ethylene glycol) Derivatives
We provide fundamental guidelines in the form of a tutorial to be taken into account for the preparation and characterization of a specific class of poly(ethylene glycol) (PEG) derivatives, namely azide-terminated PEGs. Special attention is given to the effect of these chain end groups and their precursors on properties affecting the PEGylation of proteins, nanoparticles and nanostructured surfaces. Notwithstanding the presence of 13C satellite peaks, we show that 1H NMR enables not only the routine quantitative determination of chain-end substitution, but is also a unique method to calculate the absolute number average molecular weight of PEG derivatives. In the use of size exclusion chromatography to get molecular weight distributions, we highlight the importance of distinguishing between eventual secondary reactions involving molecular weight changes and the formation of PEG complexes due to residual amounts of metal cations from reactants. Finally, we show that azide end groups affect PEG melting behavior. In contrast to oxygen-containing end groups, azides do not interact with PEG segments, thus inducing defect formation in the crystal lattice and the reduction of crystal sizes. Melting temperature and degree of crystallinity decrease become especially relevant for PEGs with very low molecular weight, and its comprehension is particularly important for solid-state applications.
Open AccessSome Guidelines for the Synthesis and Melting Characterization of Azide Poly(ethylene glycol) Derivatives
We provide fundamental guidelines in the form of a tutorial to be taken into account for the preparation and characterization of a specific class of poly(ethylene glycol) (PEG) derivatives, namely azide-terminated PEGs. Special attention is given to the effect of these chain end groups and their precursors on properties affecting the PEGylation of proteins, nanoparticles and nanostructured surfaces. Notwithstanding the presence of 13C satellite peaks, we show that 1H NMR enables not only the routine quantitative determination of chain-end substitution, but is also a unique method to calculate the absolute number average molecular weight of PEG derivatives. In the use of size exclusion chromatography to get molecular weight distributions, we highlight the importance of distinguishing between eventual secondary reactions involving molecular weight changes and the formation of PEG complexes due to residual amounts of metal cations from reactants. Finally, we show that azide end groups affect PEG melting behavior. In contrast to oxygen-containing end groups, azides do not interact with PEG segments, thus inducing defect formation in the crystal lattice and the reduction of crystal sizes. Melting temperature and degree of crystallinity decrease become especially relevant for PEGs with very low molecular weight, and its comprehension is particularly important for solid-state applications.
- Open Access
A Global View on Block Copolymers
In this systematic review, a total of 45,143 publications on block copolymers, issued between 1952 and 2019, are analyzed in terms of number, source, language, institution, country, keywords, and block copolymer type, to find out their evolution and predict research trends. The number of publications devoted to block copolymers has been growing for over six decades, maintaining a consistent level throughout the last few years. In their majority, documents came out of the United States, although more recently, Chinese institutions are those displaying the largest production. Keywords analysis indicated that one-third of the publications concerned synthesis, around 20% explored self-assembly and morphological aspects, and another 20% referred to block copolymer applications in solution. In particular, 2019 confirmed the expansion of studies related to drug delivery, and in minor extent, to a deeper view of self-assembling. Styrene–butadiene–styrene block copolymer was the most popular in studies covering both basic and industrially oriented aspects. Other highly investigated copolymers are PEO-b–PPO-b–PEO (Pluronic©) and amphiphilic block copolymers based on polycaprolactone or poly(lactic acid), which owed their success to their potential as delivery vehicles. Future trending topics will concern nanomedicine challenges and technology-related applications, with a special attention toward the orientation and ordering of mesophase-separated morphologies.
Open AccessA Global View on Block Copolymers
In this systematic review, a total of 45,143 publications on block copolymers, issued between 1952 and 2019, are analyzed in terms of number, source, language, institution, country, keywords, and block copolymer type, to find out their evolution and predict research trends. The number of publications devoted to block copolymers has been growing for over six decades, maintaining a consistent level throughout the last few years. In their majority, documents came out of the United States, although more recently, Chinese institutions are those displaying the largest production. Keywords analysis indicated that one-third of the publications concerned synthesis, around 20% explored self-assembly and morphological aspects, and another 20% referred to block copolymer applications in solution. In particular, 2019 confirmed the expansion of studies related to drug delivery, and in minor extent, to a deeper view of self-assembling. Styrene–butadiene–styrene block copolymer was the most popular in studies covering both basic and industrially oriented aspects. Other highly investigated copolymers are PEO-b–PPO-b–PEO (Pluronic©) and amphiphilic block copolymers based on polycaprolactone or poly(lactic acid), which owed their success to their potential as delivery vehicles. Future trending topics will concern nanomedicine challenges and technology-related applications, with a special attention toward the orientation and ordering of mesophase-separated morphologies.
- Open Access
- 11 October 2019
- Published by American Chemical Society (ACS) in ChemRxiv
Probing the Versatility of Shape-Persistent Tetraphenylmethane Dendrimers by Modification of the Skeleton
Tetraphenylmethane has emerged as a recurrent building block for advanced porous materials such as COFs, PAFs and hypercrosslinked polymers. Guided by a similar design principle, we have previously synthesized shape-persistent dendrimers with tetraphenylmethane nodes and ethynylene linkers. Here we report the generality of our approach by describing new dendritic architectures built from tetraphenylmethane. First, we prepared expanded dendrimers where the tetrahedral units are bonded through larger rigid rod spacers. Among the different synthetic strategies tested, the convergent route, with alternating steps of Pd-catalyzed Sonogashira coupling and alkyne activation by removal of TMS masking groups, efficiently afforded the first- and second-generation dendrimers. A second type of compounds having a linear diyne at the core is also described. The dendrimers of generations 1-2 were also synthesized by a convergent approach, with the diyne being assembled in the last step of the synthesis by a Glaser oxidative homocoupling of the corresponding dendrons bearing a terminal alkyne at the focal point. A third-generation dendrimer was also successfully prepared by a double-phase strategy.
- 11 October 2019
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessProbing the Versatility of Shape-Persistent Tetraphenylmethane Dendrimers by Modification of the Skeleton
Tetraphenylmethane has emerged as a recurrent building block for advanced porous materials such as COFs, PAFs and hypercrosslinked polymers. Guided by a similar design principle, we have previously synthesized shape-persistent dendrimers with tetraphenylmethane nodes and ethynylene linkers. Here we report the generality of our approach by describing new dendritic architectures built from tetraphenylmethane. First, we prepared expanded dendrimers where the tetrahedral units are bonded through larger rigid rod spacers. Among the different synthetic strategies tested, the convergent route, with alternating steps of Pd-catalyzed Sonogashira coupling and alkyne activation by removal of TMS masking groups, efficiently afforded the first- and second-generation dendrimers. A second type of compounds having a linear diyne at the core is also described. The dendrimers of generations 1-2 were also synthesized by a convergent approach, with the diyne being assembled in the last step of the synthesis by a Glaser oxidative homocoupling of the corresponding dendrons bearing a terminal alkyne at the focal point. A third-generation dendrimer was also successfully prepared by a double-phase strategy.
- 22 November 2017
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 82 (24) , 13231-13238
Divergent Synthesis of Porous Tetraphenylmethane Dendrimers
Tetraphenylmethane-ethynylene-based shape-persistent dendrimers are a new class of nanoobjects with an intriguing 3D architecture. We report an efficient divergent strategy for their synthesis based on the Sonogashira Pd-catalyzed coupling of terminal alkynes with aryl iodides. As repeat unit, we prepared a tetraphenylmethane derivative bearing a terminal alkyne and three triazene moieties. Coupling of this building block to tetrakis(p-iodophenyl)methane afforded, after triazene activation, a dodecaiodo-terminated first generation dendrimer, which was transformed by another Sonogashira coupling into a methoxy-terminated second generation dendrimer with persistent globular shape and well-defined cavities. This work also unveils new aspects of triazene chemistry, i.e., the unprecedented efficient generation of an azo compound by mixing of a triazene with phenol.
- 22 November 2017
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 82 (24) , 13231-13238
Divergent Synthesis of Porous Tetraphenylmethane Dendrimers
Tetraphenylmethane-ethynylene-based shape-persistent dendrimers are a new class of nanoobjects with an intriguing 3D architecture. We report an efficient divergent strategy for their synthesis based on the Sonogashira Pd-catalyzed coupling of terminal alkynes with aryl iodides. As repeat unit, we prepared a tetraphenylmethane derivative bearing a terminal alkyne and three triazene moieties. Coupling of this building block to tetrakis(p-iodophenyl)methane afforded, after triazene activation, a dodecaiodo-terminated first generation dendrimer, which was transformed by another Sonogashira coupling into a methoxy-terminated second generation dendrimer with persistent globular shape and well-defined cavities. This work also unveils new aspects of triazene chemistry, i.e., the unprecedented efficient generation of an azo compound by mixing of a triazene with phenol.
- 29 July 2016
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 7 (36) , 5641-5645
Shape-persistent fluorescent tetraphenylmethane dendrimers
We report the first examples of a new class of rigid dendrimers made of three-dimensional tetraphenylmethane units connected by ethynylene linkers.
- 29 July 2016
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 7 (36) , 5641-5645
Shape-persistent fluorescent tetraphenylmethane dendrimers
We report the first examples of a new class of rigid dendrimers made of three-dimensional tetraphenylmethane units connected by ethynylene linkers.
- 6 July 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (31) , 21305-21314
A computational study of bulk porous two-dimensional polymers related to graphyne
Over the last twelve years there has been an explosion in the area of reticular chemistry with several classes of carbonaceous or carbon-rich reticular compounds coming into the scene and/or suffering an exponential growth in the number of related studies. Examples are MOFs, COFs, graphene and 2D polymers. π-Conjugated reticular compounds in particular are of great interest due to their optoelectronic properties. In this study we use density functional theory methods with periodic boundary conditions to investigate the stacking arrangements of bulk 2D polymer multilayer porous graphyne A, the related carbon allotrope multilayer graphyne B, and the analog bulk 2D polymer C in which the triple bonds of A are substituted by double bonds. The results show that for the three materials the eclipsed stacking arrangements are considerably less stable than staggered and slipped arrangements, with the more stable structures being slipped, staggered and off-centered-staggered arrangements for A, B and C, respectively. To shed light on the π–π interactions responsible for the geometry and relative energies of the different stacking modes we analyze the topology of the electron density using the electron localization function. In addition, simulated patterns for powder X-ray diffraction have been obtained from the optimized systems, which can be used for identification of the bulk 2D reticular compounds in future syntheses.
- 6 July 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (31) , 21305-21314
A computational study of bulk porous two-dimensional polymers related to graphyne
Over the last twelve years there has been an explosion in the area of reticular chemistry with several classes of carbonaceous or carbon-rich reticular compounds coming into the scene and/or suffering an exponential growth in the number of related studies. Examples are MOFs, COFs, graphene and 2D polymers. π-Conjugated reticular compounds in particular are of great interest due to their optoelectronic properties. In this study we use density functional theory methods with periodic boundary conditions to investigate the stacking arrangements of bulk 2D polymer multilayer porous graphyne A, the related carbon allotrope multilayer graphyne B, and the analog bulk 2D polymer C in which the triple bonds of A are substituted by double bonds. The results show that for the three materials the eclipsed stacking arrangements are considerably less stable than staggered and slipped arrangements, with the more stable structures being slipped, staggered and off-centered-staggered arrangements for A, B and C, respectively. To shed light on the π–π interactions responsible for the geometry and relative energies of the different stacking modes we analyze the topology of the electron density using the electron localization function. In addition, simulated patterns for powder X-ray diffraction have been obtained from the optimized systems, which can be used for identification of the bulk 2D reticular compounds in future syntheses.
- 3 June 2009
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 74 (13) , 4782-4786
Synthesis of 25-Hydroxyvitamin D3 and 26,26,26,27,27,27-Hexadeutero-25-hydroxyvitamin D3 on Solid Support
A convenient five-step route to 25-hydroxylated vitamin D-3 compounds on (hydroxymethyl)polystyrene support is reported. A CD-side chain fragment was anchored to the solid phase through an ester group at C25 and coupled to an A ring building block to assemble the vitamin D triene system by the Wittig-Horner approach. Deprotection of the hydroxy group was carried out on the support, prior to functionalization at C25. The title compounds were released from the resin in excellent global yield by nucleophilic attack on the ester carbonyl group using commercially available organometallic reagents. This key last step offers all opportunity for the efficient generation of 26,27-labeled compounds and also for diversification at the side chain without need for a pool of side chain fragments.
- 3 June 2009
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 74 (13) , 4782-4786
Synthesis of 25-Hydroxyvitamin D3 and 26,26,26,27,27,27-Hexadeutero-25-hydroxyvitamin D3 on Solid Support
A convenient five-step route to 25-hydroxylated vitamin D-3 compounds on (hydroxymethyl)polystyrene support is reported. A CD-side chain fragment was anchored to the solid phase through an ester group at C25 and coupled to an A ring building block to assemble the vitamin D triene system by the Wittig-Horner approach. Deprotection of the hydroxy group was carried out on the support, prior to functionalization at C25. The title compounds were released from the resin in excellent global yield by nucleophilic attack on the ester carbonyl group using commercially available organometallic reagents. This key last step offers all opportunity for the efficient generation of 26,27-labeled compounds and also for diversification at the side chain without need for a pool of side chain fragments.