Shiyu Su
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Shiyu Su has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Mike Shuo-Wei Chen
University of Southern California
10 shared publications - Qiaochu Zhang
University of Virginia
5 shared publications - Hsiang-Chun Cheng
University of Southern California
3 shared publications Mike Shuo-Wei Chen
Department of Electrical Engineering-Electrophysics, University of Southern California, Los Angeles, CA 90089-0271 USA
3 shared publications- Ce Yang
Department of Electrical and Computer Engineering, University of Southern California, Los Angeles, CA, USA
2 shared publications - Mayank Palaria
University of Southern California
2 shared publications
Latest Publications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Magazine
- Vol. 18 (3) , 26-43
Principles and Practices of High-Speed DAC Design: From Conversion Fundamentals to Layout-Aware Implementation
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Magazine
- Vol. 18 (3) , 26-43
Principles and Practices of High-Speed DAC Design: From Conversion Fundamentals to Layout-Aware Implementation
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 3125-3137
A Stochastic Analog Boolean Satisfiability Solver
This article presents a stochastic analog Boolean satisfiability (SAT) solver, featuring a fast open-loop architecture with continuous-time (CT) self-loopback pull-up switches, a discrete-time (DT) scrambling scheme, and a cost-efficient hybrid random code generator. The SAT prototype demonstrates 100% solvability and 3.5-$\mu $ s solution time with 8.6-nJ energy consumption for 1000 hard benchmark problems (20 variables and 91 clauses) in 65-nm complementary metal–oxide–semiconductor (CMOS), achieving over$1000\times $ improvement in solution time compared to the prior analog SAT solver, and more than$10\times $ improvement compared to state-of-the-art digital SAT solvers implemented in a similar process without additional pre-processing. Moreover, the proposed SAT solver is highly flexible and modular, allowing a low-complexity, low-cost, and scalable design.- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 3125-3137
A Stochastic Analog Boolean Satisfiability Solver
This article presents a stochastic analog Boolean satisfiability (SAT) solver, featuring a fast open-loop architecture with continuous-time (CT) self-loopback pull-up switches, a discrete-time (DT) scrambling scheme, and a cost-efficient hybrid random code generator. The SAT prototype demonstrates 100% solvability and 3.5-$\mu $ s solution time with 8.6-nJ energy consumption for 1000 hard benchmark problems (20 variables and 91 clauses) in 65-nm complementary metal–oxide–semiconductor (CMOS), achieving over$1000\times $ improvement in solution time compared to the prior analog SAT solver, and more than$10\times $ improvement compared to state-of-the-art digital SAT solvers implemented in a similar process without additional pre-processing. Moreover, the proposed SAT solver is highly flexible and modular, allowing a low-complexity, low-cost, and scalable design.- 12 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (12) , 4662-4677
A Millimeter-Wave Direct Digital Transmitter Using Multiphase Subharmonic Switching PA
This article presents a direct digital transmitter (TX) employing a multiphase subharmonic switching (MP-SHS) power amplifier (PA) to achieve both high peak and power back-off (PBO) efficiency with wide signal bandwidth. A phase-shifted subharmonic (SH) local oscillator (LO) divider is proposed to suppress SH spurs with minimal implementation overhead by introducing an additional phase shift during LO frequency division. Furthermore, a dual-rate hybrid digital-to-analog converter (HDAC) is integrated with the MP-SHS TX, which enables noise shaping and lowers in-band error vector magnitude (EVM). A proof-of-concept prototype, fabricated in 65-nm CMOS, operates at 24 GHz, achieving 19.2-dBm peak output power with 38.3% peak power-added efficiency (PAE). This TX demonstrates 22.3%/20.3% average PAE with EVM of −34.3 dB/−30.8 dB at 1.2/3.2 Gb/s for 64-QAM and 256-QAM single-carrier (SC) modulated signals, respectively.
- 12 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (12) , 4662-4677
A Millimeter-Wave Direct Digital Transmitter Using Multiphase Subharmonic Switching PA
This article presents a direct digital transmitter (TX) employing a multiphase subharmonic switching (MP-SHS) power amplifier (PA) to achieve both high peak and power back-off (PBO) efficiency with wide signal bandwidth. A phase-shifted subharmonic (SH) local oscillator (LO) divider is proposed to suppress SH spurs with minimal implementation overhead by introducing an additional phase shift during LO frequency division. Furthermore, a dual-rate hybrid digital-to-analog converter (HDAC) is integrated with the MP-SHS TX, which enables noise shaping and lowers in-band error vector magnitude (EVM). A proof-of-concept prototype, fabricated in 65-nm CMOS, operates at 24 GHz, achieving 19.2-dBm peak output power with 38.3% peak power-added efficiency (PAE). This TX demonstrates 22.3%/20.3% average PAE with EVM of −34.3 dB/−30.8 dB at 1.2/3.2 Gb/s for 64-QAM and 256-QAM single-carrier (SC) modulated signals, respectively.
- 3 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (12) , 4647-4661
A Blocker-Tolerant Receiver With VCO-Based Non-Uniform Multi-Level Time-Approximation Filter
A blocker-tolerant millimeter-wave (mm-Wave) receiver is presented using a multi-level time-approximation filter (mTAF), a voltage-controlled oscillator (VCO)-based integrator with embedded digitization, and non-uniform (NU) sampling to enhance filtering flexibility and efficiency. The mTAF approximates FIR filter responses using a digitally generated multi-level weighting pattern that controls gated integration over time. Compared with state-of-the-art reconfigurable blocker-tolerant receivers, the seven-level mTAF introduces more programmable notches, enables asymmetric filtering, and provides wider stopbands for improved blocker suppression. The VCO-based integrator simplifies circuit complexity and achieves competitive power efficiency compared with conventional Gm-C designs, while NU sampling further mitigates alias-band blockers. Fabricated in 28-nm CMOS, the prototype occupies 0.83 mm2 and consumes 87 mW. The receiver achieves 65-dB maximum blocker rejection, −36-dB EVM without blockers, and −31-dB EVM with a 24-dBc blocker at 1.217-GHz offset from a 32-GHz LO.
- 3 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (12) , 4647-4661
A Blocker-Tolerant Receiver With VCO-Based Non-Uniform Multi-Level Time-Approximation Filter
A blocker-tolerant millimeter-wave (mm-Wave) receiver is presented using a multi-level time-approximation filter (mTAF), a voltage-controlled oscillator (VCO)-based integrator with embedded digitization, and non-uniform (NU) sampling to enhance filtering flexibility and efficiency. The mTAF approximates FIR filter responses using a digitally generated multi-level weighting pattern that controls gated integration over time. Compared with state-of-the-art reconfigurable blocker-tolerant receivers, the seven-level mTAF introduces more programmable notches, enables asymmetric filtering, and provides wider stopbands for improved blocker suppression. The VCO-based integrator simplifies circuit complexity and achieves competitive power efficiency compared with conventional Gm-C designs, while NU sampling further mitigates alias-band blockers. Fabricated in 28-nm CMOS, the prototype occupies 0.83 mm2 and consumes 87 mW. The receiver achieves 65-dB maximum blocker rejection, −36-dB EVM without blockers, and −31-dB EVM with a 24-dBc blocker at 1.217-GHz offset from a 32-GHz LO.
- 27 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (4) , 1223-1235
Stochastic TDC Using Common-Mode Time Dithering and Passive Approximate Adders
The stochastic time-to-digital converter (STDC) presents a novel approach to automating the design and implementation process, delivering high performance with strong resilience to process variations and layout-induced artifacts, although with increased silicon area and higher power consumption. To effectively lower these costs, this article presents a 10-bit fully synthesizable STDC design using a removal-free common-mode time dithering technique, which significantly reduces the numbers of delay cells and D-type flip-flops (DFFs) required for requisite levels of stochastic operation. This also reduces the size of the associated backend unary-to-binary (U2B) encoder. In addition, passive approximate adders are used to further reduce the area of the U2B for a compact design and significantly lower time for digital place and route. Two STDC prototypes are implemented in a 12-nm FinFET process with a conventional adder and passive approximate adder, respectively. STDC prototypes achieve energy efficiency of 160 dB, while the one using passive approximation adder improves the area efficiency from 28.6 to 19.1 $\mu\text{m}^2$ /step.
- 27 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (4) , 1223-1235
Stochastic TDC Using Common-Mode Time Dithering and Passive Approximate Adders
The stochastic time-to-digital converter (STDC) presents a novel approach to automating the design and implementation process, delivering high performance with strong resilience to process variations and layout-induced artifacts, although with increased silicon area and higher power consumption. To effectively lower these costs, this article presents a 10-bit fully synthesizable STDC design using a removal-free common-mode time dithering technique, which significantly reduces the numbers of delay cells and D-type flip-flops (DFFs) required for requisite levels of stochastic operation. This also reduces the size of the associated backend unary-to-binary (U2B) encoder. In addition, passive approximate adders are used to further reduce the area of the U2B for a compact design and significantly lower time for digital place and route. Two STDC prototypes are implemented in a 12-nm FinFET process with a conventional adder and passive approximate adder, respectively. STDC prototypes achieve energy efficiency of 160 dB, while the one using passive approximation adder improves the area efficiency from 28.6 to 19.1 $\mu\text{m}^2$ /step.
- 10 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (1) , 40-51
Fractional-N Digital MDLL With Injection-Error Scrambling and Calibration
This article presents a fractional- N digital multiplying delay-locked loop (MDLL) that uses a digital-to-time converter (DTC) for controlling the reference injection timing to support the fractional- N operation. This fractional- N MDLL features an injection-error scrambling scheme for DTC error randomization and a background third-order DTC delay equalizer for DTC error calibration, to mitigate reference-injection-induced spurs while keeping a low phase noise floor. The MDLL prototype demonstrates 800-fs rms jitter, $-$ 67 dBc fractional spur, and $-$ 58 dBc reference spur. With the proposed schemes, the fractional and reference spurs are suppressed by 29 and 32 dB, respectively.
- 10 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (1) , 40-51
Fractional-N Digital MDLL With Injection-Error Scrambling and Calibration
This article presents a fractional- N digital multiplying delay-locked loop (MDLL) that uses a digital-to-time converter (DTC) for controlling the reference injection timing to support the fractional- N operation. This fractional- N MDLL features an injection-error scrambling scheme for DTC error randomization and a background third-order DTC delay equalizer for DTC error calibration, to mitigate reference-injection-induced spurs while keeping a low phase noise floor. The MDLL prototype demonstrates 800-fs rms jitter, $-$ 67 dBc fractional spur, and $-$ 58 dBc reference spur. With the proposed schemes, the fractional and reference spurs are suppressed by 29 and 32 dB, respectively.
- 17 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 58 (5) , 1201-1211
Millimeter-Wave Receiver With Non-Uniform Time-Approximation Filter
This article presents a non-uniform (NU) time-approximation filter (TAF) technique for a wireless receiver (RX) to reject unwanted blockers. The proposed NU TAF leverages the alias-spreading property of NU sampling (NUS) and a TAF that approximates a finite impulse response (FIR) filter response in the time domain, achieving an overall flexible filter response with a higher attenuation factor. The filter response can be readily reconfigured by changing the NU sequence and/or the TAF waveform without adjusting the passive component value. In addition, a quad-switch gated integrator is proposed to significantly reduce the power consumption by sharing the current among the $\textit{G} _m$ cells. Detailed theoretical analysis on NU-TAF operation and RX implementation considering circuit non-idealities are provided to explore the design tradeoffs of the proposed techniques. A proof-of-concept millimeter-wave RX is implemented in the 28-nm CMOS process. Thanks to the NU TAF, the RX prototype achieves $>$ 45-dB blocker rejection with a 33.7-GHz carrier frequency. The EVM measures $-$ 30.9 dB using a 100-MSymbol/s 64-QAM signal in the presence of a 10-dBc out-of-band (OOB) blocker.
- 17 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 58 (5) , 1201-1211
Millimeter-Wave Receiver With Non-Uniform Time-Approximation Filter
This article presents a non-uniform (NU) time-approximation filter (TAF) technique for a wireless receiver (RX) to reject unwanted blockers. The proposed NU TAF leverages the alias-spreading property of NU sampling (NUS) and a TAF that approximates a finite impulse response (FIR) filter response in the time domain, achieving an overall flexible filter response with a higher attenuation factor. The filter response can be readily reconfigured by changing the NU sequence and/or the TAF waveform without adjusting the passive component value. In addition, a quad-switch gated integrator is proposed to significantly reduce the power consumption by sharing the current among the $\textit{G} _m$ cells. Detailed theoretical analysis on NU-TAF operation and RX implementation considering circuit non-idealities are provided to explore the design tradeoffs of the proposed techniques. A proof-of-concept millimeter-wave RX is implemented in the 28-nm CMOS process. Thanks to the NU TAF, the RX prototype achieves $>$ 45-dB blocker rejection with a 33.7-GHz carrier frequency. The EVM measures $-$ 30.9 dB using a 100-MSymbol/s 64-QAM signal in the presence of a 10-dBc out-of-band (OOB) blocker.
- 12 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (3) , 906-916
SAW-Less Direct RF Transmitter With Multimode Noise Shaping and Tri-Level Time-Approximation Filter
This article presents a multimode direct radio frequency (RF) transmitter capable of a high in-band dynamic range and a low out-of-band (OOB) noise floor. It features a hybrid digital-to-analog converter (DAC) with a reconfigurable dual-band delta–sigma modulator to lower the quantization noise floor at one or two frequency bands. Additionally, a tri-level time-approximation filter is proposed to further suppress OOB noise with high tunability and stopband attenuation. The objective is to demonstrate a low-noise floor without using a surface acoustic wave (SAW) filter. For a 256-quadratic-amplitude modulation (QAM) signal with 17.4-dBm average output power at a 2.2-GHz carrier, the silicon prototype achieves −40-dB error vector magnitude (EVM) and −169-dBc/Hz noise spectral density (NSD) at 68-MHz offset by consuming a total power of 1.2 W.
- 12 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (3) , 906-916
SAW-Less Direct RF Transmitter With Multimode Noise Shaping and Tri-Level Time-Approximation Filter
This article presents a multimode direct radio frequency (RF) transmitter capable of a high in-band dynamic range and a low out-of-band (OOB) noise floor. It features a hybrid digital-to-analog converter (DAC) with a reconfigurable dual-band delta–sigma modulator to lower the quantization noise floor at one or two frequency bands. Additionally, a tri-level time-approximation filter is proposed to further suppress OOB noise with high tunability and stopband attenuation. The objective is to demonstrate a low-noise floor without using a surface acoustic wave (SAW) filter. For a 256-quadratic-amplitude modulation (QAM) signal with 17.4-dBm average output power at a 2.2-GHz carrier, the silicon prototype achieves −40-dB error vector magnitude (EVM) and −169-dBc/Hz noise spectral density (NSD) at 68-MHz offset by consuming a total power of 1.2 W.
- 27 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (1) , 80-89
A Fractional-N Digital MDLL With Background Two-Point DTC Calibration
This article presents a fractional- $N$ digital multiplying delay-locked loop (MDLL) that employs a digital-to-time converter (DTC) to control the reference injection for the fractional- $N$ operation. The presented MDLL features a background two-point DTC calibration that simultaneously corrects the DTC gain and offset errors to achieve a low-jitter and low-spur architecture. The DTC errors are sensed using an embedded time-to-digital converter (TDC) and extracted in the digital domain for reduced implementation overhead. A new TDC dithering and dither noise cancellation technique is used to improve the estimation accuracy of the DTC errors at the presence of TDC quantization error and differential nonlinearity (DNL). In addition, the adaptive dither noise cancellation scheme uses a comb filter to decouple the dither noise and DTC error estimations, allowing the two schemes to operate simultaneously. The proof-of-concept MDLL prototype fabricated in 65-nm CMOS achieves −60-dBc fractional spur and 1.67-ps rms jitter at around 20-MHz offset. With the proposed calibration scheme, a >25-dB spur reduction in reference and fractional spurs is demonstrated.
- 27 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (1) , 80-89
A Fractional-N Digital MDLL With Background Two-Point DTC Calibration
This article presents a fractional- $N$ digital multiplying delay-locked loop (MDLL) that employs a digital-to-time converter (DTC) to control the reference injection for the fractional- $N$ operation. The presented MDLL features a background two-point DTC calibration that simultaneously corrects the DTC gain and offset errors to achieve a low-jitter and low-spur architecture. The DTC errors are sensed using an embedded time-to-digital converter (TDC) and extracted in the digital domain for reduced implementation overhead. A new TDC dithering and dither noise cancellation technique is used to improve the estimation accuracy of the DTC errors at the presence of TDC quantization error and differential nonlinearity (DNL). In addition, the adaptive dither noise cancellation scheme uses a comb filter to decouple the dither noise and DTC error estimations, allowing the two schemes to operate simultaneously. The proof-of-concept MDLL prototype fabricated in 65-nm CMOS achieves −60-dBc fractional spur and 1.67-ps rms jitter at around 20-MHz offset. With the proposed calibration scheme, a >25-dB spur reduction in reference and fractional spurs is demonstrated.